Hi help me. :crying:
I have installed CM9 stable. My phone is work only with charger. I am sure that's not problem with USB port, because only usb mode works if i go in options -> storage -> usb connection if i change from mass storage to MTP or PTP several times when in phone appears on the notification bar information about connection. It is temporary fix until i reconnect it. I also tried in CWM recovery and nothing happens likewise fastboot or flashmode and it is the same, only led is lightening. Nothing help like restoring backup from recovery. It can be caused by OTG USB modules ? How can i back to stock rom ? (I tried PC Companion and SEUS). I think something is wrong with usb modules in the phone (not Windows or PC, etc.). It is a option to flash kernel or rom without using PC? What can i do with that ? Please help me
Install all drivers for all devices/modes from flashtool (installation folder) -> drivers. Then try again
Otherwise reinstall or update PC Companion or Sony Update Service, they install some drivers, too. Or you try another PC :good:
I'm sorry but it's impossible to flash a kernel without your PC...
Sent from my Nexus 7 running Android 4.2.2
Ok, thanks for the advice. I am gonna try this, but how i should install drivers if nothing appears in the device manager in PC. Only what i see it is a called like „sony sa0102 adb interface" and only if i switching between usb modes in phone settings. Maybe the issue is in the phone like i write earlier about this. The smartphone dont detect usb cable present or he doesnt switching a driver for the connecting. Thanks again for the reply.
Sure its not the problem of the cable?
Don't forget to hit thanks
It can't be problem with cable because very rarely works in while when i changing usb modes in settings phone. But, thanks i will try on another cable. My kernel is from CM9 stable in zip file, but on this kernel only will work CM9 or nothing else like ROMs based on the cyanogenmod for example CM10 or AOKP ? I, one day connect usb otg (host) cable to phone and charger. This cable had 2 inputs male but also i have converter usb (female-female). And only work mouse and the keyboard (without usb flash disks, drives, etc.). I would be grateful for the answer my question. Thanks.
Related
Cant connect to Kies as it says USB device not recognized, used to but not anymore, dont see this problem in the S2 thread, anyone?
Currently using Win7 64
Thx
Same thing happened to me. I just reinstalled making sure all other programs were closed and I haven't had the problem since.
Hope this helps.
Install Kies .
Reboot phone
Start Kies
Connect Let KIES find phone .
Turn KIES off from taskbar .
Turn USB debugging on phone connect USB mass storage mode and let windows find driver .
That do work try all the other posts same subject for an alternative .
jje
No go
Tried all of the above, still no go, could it be my micro usb port on the phone is busted? When i tried connecting as Mass storage it says usb cable is connected, pls remove cable.
cablesguy said:
Tried all of the above, still no go, could it be my micro usb port on the phone is busted? When i tried connecting as Mass storage it says usb cable is connected, pls remove cable.
Click to expand...
Click to collapse
No thats just incorrect user settings .
Remove cable go to settings Applications Turn on USB debugging .
And?or turn usb mass storage mode on via settings Wireless and network USB settings then connect cable .
jje
JJEgan said:
No thats just incorrect user settings .
Remove cable go to settings Applications Turn on USB debugging .
And?or turn usb mass storage mode on via settings Wireless and network USB settings then connect cable .
jje
Click to expand...
Click to collapse
Yup, I did. I removed cables and turned on USB debugging, and tried the mass storage mode, upon connecting it says cable connected and to remove.
I'm getting this problem once I'm in Download mode. It's worked before... why would it stop?
Any tips?
I have the same problem
I seem to have the same problem I connect my phone via USB and get a USB Device Not Recognized message but MTP application opens on the phone. This has only just happened I have had it working before since I had the phone on 2 computers and have tried to different cables now it does not work on either computer. If any one has had any luck I would love to know how you fixed it.
Samsung Galaxy S2 - USB Device not recognized.
Hey Guys,
I have the same problem. I've even tried going into "Recovery" Mode and then running odin.. Still no luck. It just does not recognize the phone.
I tried a different cable but still no luck.
Guys,
i had had the same problem until i started to use the original USB cable(came with the phone).
Have a good luck!
Kirby
Got the same usb problem, different pc's, driver, cables nothing works.
After three month of use no Kies Odin ore mass storage us....big problem
any news info on this? seems to be quite common, though I only get it with stock roms, custom roms dont seem to have this issue
Cables Guy; I'm trying to figure out if I'm having the same problem as you. Does your phone charge when plugged in? Because mine does not.
i think in your case it might be the usb port in the phone itself, if nothing that you plug works well.
I believe there is an issue with kies/MTP and windows drivers for the rest though.
For me my phone doesnt get detected o nmy onboard USB but it does on the usb3 pccard i have.
any good news to solve this problems?
i got the same problem and worst case is my phone cannot detect sim
I had the same problem.. I just switched back to the original cable that came with the phone & problem was solved..
Sent from my SGH-T989D using XDA App
cablesguy said:
Cant connect to Kies as it says USB device not recognized, used to but not anymore, dont see this problem in the S2 thread, anyone?
Currently using Win7 64
Thx
Click to expand...
Click to collapse
whats your phone kernel? and are u able to connect to pc as usb storage? or did u flash anything weird before?
Hello everybody,
I know there are thousands of threads like this, but none of them gives me a solution. If I try to connect my SG2 (Stock ROM) with an USB cable, I get a really annoying message all the time. (Screenshot: http://www.techiesguide.com/wp-content/uploads/2011/10/USB-device-not-recognized-1.gif) It's still charging. When I try to install the drivers, I get an error message too. It tries to install drivers through Windows Updates, which doesn't work. Maybe Samsung's old drivers will work... Does someone have them?
My USB port just work. I can use everything else with it. The cable also works, and I've tried several cables. USB Debugging is enabled on my phone.
Things I already tried:
-Install drivers through download mode
-Cleaning up the USB port
-Different USB ports and cables
-Reinstalling drivers/Samsung Kies
-Removing the battery
-Install drivers w/o SIM and SD card
-Manually install drivers
-Soft factory reset
-Samsung Kies' troubleshooting
-USB Mass Storage
I hope somebody knows a solution for this.
Thanks in advance,
DroidHackz
DroidHackz said:
Hello everybody,
I know there are thousands of threads like this, but none of them gives me a solution. If I try to connect my SG2 (Stock ROM) with an USB cable, I get a really annoying message all the time. (Screenshot: http://www.techiesguide.com/wp-content/uploads/2011/10/USB-device-not-recognized-1.gif) It's still charging. When I try to install the drivers, I get an error message too. It tries to install drivers through Windows Updates, which doesn't work. Maybe Samsung's old drivers will work... Does someone have them?
My USB port just work. I can use everything else with it. The cable also works, and I've tried several cables. USB Debugging is enabled on my phone.
Things I already tried:
-Install drivers through download mode
-Cleaning up the USB port
-Different USB ports and cables
-Reinstalling drivers/Samsung Kies
-Removing the battery
-Install drivers w/o SIM and SD card
-Manually install drivers
-Soft factory reset
-Samsung Kies' troubleshooting
-USB Mass Storage
I hope somebody knows a solution for this.
Thanks in advance,
DroidHackz
Click to expand...
Click to collapse
Same problem for me, I think my Micro USB Port is broken (I'm pretty sure). Just replace it for ~10$ and you'll be fine
sadekmefti said:
Same problem for me, I think my Micro USB Port is broken (I'm pretty sure). Just replace it for ~10$ and you'll be fine
Click to expand...
Click to collapse
Okay, I'll use another device, and if that one works I can confirm you're right and find a solution for it.
EDIT: You're right. Where can I get one?
Help need ASAP...
Yes..i also facing the same problem. I'm using Sentinel Rom with siyah kernel, my phone is not booting up it..shows a battery charging icon that's charging. i have tried all the possibilities that mentioned above , but no use..its says usb not recognized and also not able to go to Recovery mode or Download Mode using the hardware keys..but USB jig works , i was able to go to download mode but PC doesn't detect it odin. So not able to flash the kernel\ROM...
The phone was working till last moment , but when i restarted this problem came.
Can anyone suggest a solution..?
Post above mine; 'Odin won't work' gets covered here all the time. Search.
Solved
Saravanashines said:
Yes..i also facing the same problem. I'm using Sentinel Rom with siyah kernel, my phone is not booting up it..shows a battery charging icon that's charging. i have tried all the possibilities that mentioned above , but no use..its says usb not recognized and also not able to go to Recovery mode or Download Mode using the hardware keys..but USB jig works , i was able to go to download mode but PC doesn't detect it odin. So not able to flash the kernel\ROM...
The phone was working till last moment , but when i restarted this problem came.
Can anyone suggest a solution..?
Click to expand...
Click to collapse
SOLVED :
Ok..i found whats the problem..the problem with my micro usb port ,which was not detecting. I connected my phone with different USB in my home PC and it detected , i went to Download mode using USB jig and flashed with new rom and its fixed. Thanks for the Help. I still have problem in my phone , if i connect my phone to any pc, phone gets rebooted. Hope i will find a solution for it.
:victory:
Hi, i have a THL5000 with the following problem: usb connection to PC’s doesn’t work.
Although, charging from USB port works and USB OTG works.
But for some reason connecting the phone via usb cable to the pc won’t recognise the phone…
A sort history of phone mods and things I have done…
1. USB connection to pc worked fine with the original stock rom.
2. I rooted the phone with SP Flash Tools and installed a custom recovery and rom, again the USB connection to the PC worked just fine and everything else worked.
3. Afterwards I wanted to return to stock rom so I used SP Flash Tools and selected the option “Format All + Download”… everything went just fine, but when the phone rebooted the IMEI info were gone (rom working fine) and also I couldn’t connect via USB cable no more!
Charging the phone and USB OTG works fine, but I have tried connecting the phone to varius pc with varius os (linux, windows XP/Vista/7/10) but no PC recognizes the phone…
I have also tried downloading Android phone drivers to the PC’s but nothing, tried different usb cables and usb ports but nothing…
I have also tried using SP Flash Tools again but the pc doesn’t recognizes the phone so I’m stuck.
Any suggestions in fixing the mess I have made???
Greetings fellows,i need some help here
My Redmi runs with the Latest Bule Mokee Rom.
Now i have a big problem with the MTP connection...
I'm using Win 10 x64 Pro on my Pc and just cant get Mtp to work.
Already tried out disabling Usb debugging,switching to Ptp mode (Can access internal Dcim folders etc) and back to Mtp but it wont work,Mass Storage works too tough.
In MTP Mode i even see Redmi2 in my Device Manager,but it seems the driver or whatever is broken.
After some google searches i found Drivers,did a Clean install and removed old stuff with Usb deviewer,still no success.
Sorry for my horrible english,but i hope someone can help :fingers-crossed:
Have a try: use another USB cable, sometimes, it happens.
Are you using the original USB cable that came with the phone?
oldslowdiver said:
Have a try: use another USB cable, sometimes, it happens.
Click to expand...
Click to collapse
I just tried the Original Cable,still the same problem,already plugged it in a other Usb port too.
Right now i have the RMN2 of a friend connected (Stock rom) and it just tries to install drivers.
So it's not Rom or Device related,guess my Win 10 ****ed up some drivers.
Hi all,
I tried to flash the latest TWRP but for some reasons it's messed up. Now I can't enter recovery mode and just wondering if there is a way to re-install it.
I tried to do it via Fastboot mode but my PC(windows 10) can't recognize the phone when in Fastboot mode. I tried several ways(e.g. reinstall USB driver, remove / install driver via device manager, etc.) but no luck.
Any help/suggestion is appreciated.
Try with the original cable. It will work for sure. I had almost the same issue, tried various drivers, etc. Once I've connected the phone with its original cable, it was recognized instantly.
Strange, other people say, the original cable is bad quality??
I would use a different cable but an usb port on the mainboard no a front usb port.
Also i do all the adb und fastboot stuff on a linux machine, it's less struggeling with drivers then.
The original cable still works though, I'm not so sure what bad quality can that be... And yes, I haven't used it in these 3 years more than half of the time. In the past year I was using a 3m Ugreen cable which didn't do the trick for drivers, still working well.
However, with some changes in the kernel or whatsoever, the original cable doesn't charge the phone anymore while connected to the computer, but it ensures a good data transfer.
PS: USB type-C is more complex and not standardized for all manufacturers, which is a bit surprising, but that's it.
eqt2010 said:
Hi all,
I tried to flash the latest TWRP but for some reasons it's messed up. Now I can't enter recovery mode and just wondering if there is a way to re-install it.
I tried to do it via Fastboot mode but my PC(windows 10) can't recognize the phone when in Fastboot mode. I tried several ways(e.g. reinstall USB driver, remove / install driver via device manager, etc.) but no luck.
Any help/suggestion is appreciated.
Click to expand...
Click to collapse
you need to format whole phone in oder to be recognized by pc.try first deleting all drivers for x2.go to windows in device manager,reboot pc and reconnect phone to pc by using usb type c cable
thank you for all the recommendations. I will try original cable and other PC using Linux and see if that works.
Update: My windows 10 PC installed the wrong driver when phone is in fastboot mode. Working fine now after deleting it from Device Manager and reinstalling.