Hi, i have a THL5000 with the following problem: usb connection to PC’s doesn’t work.
Although, charging from USB port works and USB OTG works.
But for some reason connecting the phone via usb cable to the pc won’t recognise the phone…
A sort history of phone mods and things I have done…
1. USB connection to pc worked fine with the original stock rom.
2. I rooted the phone with SP Flash Tools and installed a custom recovery and rom, again the USB connection to the PC worked just fine and everything else worked.
3. Afterwards I wanted to return to stock rom so I used SP Flash Tools and selected the option “Format All + Download”… everything went just fine, but when the phone rebooted the IMEI info were gone (rom working fine) and also I couldn’t connect via USB cable no more!
Charging the phone and USB OTG works fine, but I have tried connecting the phone to varius pc with varius os (linux, windows XP/Vista/7/10) but no PC recognizes the phone…
I have also tried downloading Android phone drivers to the PC’s but nothing, tried different usb cables and usb ports but nothing…
I have also tried using SP Flash Tools again but the pc doesn’t recognizes the phone so I’m stuck.
Any suggestions in fixing the mess I have made???
Related
This is a new issue, it used to work fine, but now, whenever I plug a USB cable into my phone and PC, nothing happens on the PC(No usb found sound) and the phone just shows that it is charging. I opened Device Manager and plugged the phone in and it did not refresh or find anything new. No Unknown Devices in DM either. Currently I am working with a Windows 7 x86 laptop.
Things I have tried:
-Different PC
-Different USB cable
-Factory Reset
-Uninstall/reinstalled HTC drivers
I dont know what the issue is, do I have a bad USB port? Any suggestions?
same problem
bump
Yeah, so i've read plenty of topics about USB problems, but none gave me the
anserw.
I'm running Villain ROM 3.0. I just cant connect my phone to the computer (Mac).
It work well before also after flashing Villain.
What i tried:
1. connecting my phone without usb debuging ->phone gives the sound and report in the notification bar : "MTP - initializing" then "USB Connected, MTP-connected" But it does not gives a connection with my mac.
2. Connecting my phone with usb debuging ->phone gives the sound, but nothing happens. nothing in the notification bar neither on the computer. It's strange becouse before it was making the same sound and giving me the info in the notification to connect.
3. I've also tried KIES air it works fine. i can see my phone content, but when im trying to send one file (130mb) there is no reaction to this.
Also some time ago i was able to get usb working by simply choosing usb debuging and restarting phone.
But now i have no acces to my storage
Please help
I have a similar problem.
When I connect my SGSII to my PC (with USB Debugging On) I see 2 Removable Drives in Windows' Explorer. If I click on either one I get the "Please Insert Disk". If I connect to the same USB with USB Debugging off, then Kies Starts but does not connect.
Now the weird bit, if I do the same thing in the next USB port, then everything works fine.
Going back to the first USB slot then the problem reappears.
The 2 USB slots are next to each other and go back to the same controller on the motherboard. I have removed Kies and reinstalled Kies. I have uninstalled all the drivers. I have even changed the USB cable. When I plug a USB External Hard Drive into either USB, it works fine.
Maybe the phone just likes the one connection per computer. I'll have to test that out in my work's PC.
Update:
managed to get a microUSB cable and tested it on my work's PC. Exact same situation. Both PCs run Windows XPpro.
Has anyone else noticed this?
Now, when you said that, i checked with my second usb por, and everything works fine .
So thanks for your help. One working with sgs2 usb port is enought for me
So the ota screwed up my phone. I was able to connect and intstall the stock eoh3 for xda the phone now starts up but I am unable to connect USB to root or flash any new rooms with Odin I can only connect Odin if the phone is booted up and debug and mock locations are on. If I pull the battery and put it in download mode it will not connect to the pc it just shows as an unknown device. I have reloaded drivers ect but not getting anywhere. Any ideas?
Try another cable if you have one, and try putting the drivers on another PC. For reasons I still haven't figured out, my home desktop PC quit connecting a couple of ROM's ago, and it won't even let me reinstall the drivers. I have a laptop that works fine (so I haven't gone into major troubleshooting) and my work PC also connects fine.
If the same issue repeats on other PC's and cables, there may be something wrong with your mini USB port. I had to have mine replaced a few months back.
Hi help me. :crying:
I have installed CM9 stable. My phone is work only with charger. I am sure that's not problem with USB port, because only usb mode works if i go in options -> storage -> usb connection if i change from mass storage to MTP or PTP several times when in phone appears on the notification bar information about connection. It is temporary fix until i reconnect it. I also tried in CWM recovery and nothing happens likewise fastboot or flashmode and it is the same, only led is lightening. Nothing help like restoring backup from recovery. It can be caused by OTG USB modules ? How can i back to stock rom ? (I tried PC Companion and SEUS). I think something is wrong with usb modules in the phone (not Windows or PC, etc.). It is a option to flash kernel or rom without using PC? What can i do with that ? Please help me
Install all drivers for all devices/modes from flashtool (installation folder) -> drivers. Then try again
Otherwise reinstall or update PC Companion or Sony Update Service, they install some drivers, too. Or you try another PC :good:
I'm sorry but it's impossible to flash a kernel without your PC...
Sent from my Nexus 7 running Android 4.2.2
Ok, thanks for the advice. I am gonna try this, but how i should install drivers if nothing appears in the device manager in PC. Only what i see it is a called like „sony sa0102 adb interface" and only if i switching between usb modes in phone settings. Maybe the issue is in the phone like i write earlier about this. The smartphone dont detect usb cable present or he doesnt switching a driver for the connecting. Thanks again for the reply.
Sure its not the problem of the cable?
Don't forget to hit thanks
It can't be problem with cable because very rarely works in while when i changing usb modes in settings phone. But, thanks i will try on another cable. My kernel is from CM9 stable in zip file, but on this kernel only will work CM9 or nothing else like ROMs based on the cyanogenmod for example CM10 or AOKP ? I, one day connect usb otg (host) cable to phone and charger. This cable had 2 inputs male but also i have converter usb (female-female). And only work mouse and the keyboard (without usb flash disks, drives, etc.). I would be grateful for the answer my question. Thanks.
Hi all,
I tried to flash the latest TWRP but for some reasons it's messed up. Now I can't enter recovery mode and just wondering if there is a way to re-install it.
I tried to do it via Fastboot mode but my PC(windows 10) can't recognize the phone when in Fastboot mode. I tried several ways(e.g. reinstall USB driver, remove / install driver via device manager, etc.) but no luck.
Any help/suggestion is appreciated.
Try with the original cable. It will work for sure. I had almost the same issue, tried various drivers, etc. Once I've connected the phone with its original cable, it was recognized instantly.
Strange, other people say, the original cable is bad quality??
I would use a different cable but an usb port on the mainboard no a front usb port.
Also i do all the adb und fastboot stuff on a linux machine, it's less struggeling with drivers then.
The original cable still works though, I'm not so sure what bad quality can that be... And yes, I haven't used it in these 3 years more than half of the time. In the past year I was using a 3m Ugreen cable which didn't do the trick for drivers, still working well.
However, with some changes in the kernel or whatsoever, the original cable doesn't charge the phone anymore while connected to the computer, but it ensures a good data transfer.
PS: USB type-C is more complex and not standardized for all manufacturers, which is a bit surprising, but that's it.
eqt2010 said:
Hi all,
I tried to flash the latest TWRP but for some reasons it's messed up. Now I can't enter recovery mode and just wondering if there is a way to re-install it.
I tried to do it via Fastboot mode but my PC(windows 10) can't recognize the phone when in Fastboot mode. I tried several ways(e.g. reinstall USB driver, remove / install driver via device manager, etc.) but no luck.
Any help/suggestion is appreciated.
Click to expand...
Click to collapse
you need to format whole phone in oder to be recognized by pc.try first deleting all drivers for x2.go to windows in device manager,reboot pc and reconnect phone to pc by using usb type c cable
thank you for all the recommendations. I will try original cable and other PC using Linux and see if that works.
Update: My windows 10 PC installed the wrong driver when phone is in fastboot mode. Working fine now after deleting it from Device Manager and reinstalling.