X10 Mini Dualtouch - My Wild Theory.... - Sony Ericsson XPERIA X10 Mini

I think multi-touch would be possible on your x10mini but at a small cost, I have a theory that if you buy a second hand mini pro screen from ebay (maybe not possible) and hard mod it and change it with the x10mini screen.... It would be possible to go on SEUS install the X10 Mini Pro stock launcher and maybe, just maybe you could ADB Shell through that way. In theory it sounds like it work, however you would need a lot of skill and knowledge to be able to do it.
I have once accidently flashed the X10mini stock market on my x10 mini pro and it worked just fine.
Maybe some of the devs and mods here could give their opinion about my noob idea.
Happy days.

lets keep it an theory...
well on paper it is possible
but to do it it is a job that is much to hard to accomplish

owain94 said:
lets keep it an theory...
well on paper it is possible
but to do it it is a job that is much to hard to accomplish
Click to expand...
Click to collapse
Really hard, different hardware controllers. Im Electronical Engineering Student

I did think about this... you can actually buy an x10 pro digitizer in ebay, and it is not very expnsive... but it comes fixed to the x10 pro case, and i don't think it fits in an x10 mini, just by looking at it of course.
??? Sent from my X10 Mini using XDA Premium App ???

I did think about this... you can actually buy an x10 pro digitizer in ebay, and it is not very expnsive... but it comes fixed to the x10 pro case, and i don't think it fits in an x10 mini, just by looking at it of course.
??? Sent from my X10 Mini using XDA Premium App ???
Click to expand...
Click to collapse
Problem would be that the connection to the digitizer is different. I2c vs. Serial uart. Next thing would be kernel for mini is not compiled with cypress chip to begin with. It would be vague to say the module would be enough to do the job. That leads to next major problem, custom kernel would most likely be needed
Sent from my U20i using XDA Premium App

Anyone managed to unload the x10mini kernal?

D4rKn3sSyS said:
Really hard, different hardware controllers. Im Electronical Engineering Student
Click to expand...
Click to collapse
dude stare in sun or something...
and keep away of football field.. new lines are just been made.. hard?!
if connectors are the same and if wires got to the same point and if amss is support for new display then it is possible...

slade87 said:
Problem would be that the connection to the digitizer is different. I2c vs. Serial uart. Next thing would be kernel for mini is not compiled with cypress chip to begin with. It would be vague to say the module would be enough to do the job. That leads to next major problem, custom kernel would most likely be needed
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
Well, like slade said the connector is different, and the kernel poses a problem too.. maybe someone could try the fake DT like on the big x10? (Im not complaining, I have the mini pro )

Chumby_666 said:
dude stare in sun or something...
and keep away of football field.. new lines are just been made.. hard?!
if connectors are the same and if wires got to the same point and if amss is support for new display then it is possible...
Click to expand...
Click to collapse
If you just put that, they can have the same pins, but how do you know the voltages, and data distribution it's the same?, i mean you can do that and got a nice short circuit due different pins distribution, and then see your display getting damaged.. sorry english is not my native language, idk if you got what i mean, make that is like try to put a amd processor on intel motherboard , After doing that it's needed to know, what it's the distribution of voltages, and if they're the same, yeah we can do it!

By doing so you risk killing the X10 Mini. And the money you paid for it and the screen of the Mini Pro, could have been used to purchase a Pro =P
And Again: Sorry for my too bad english....

Haaley said:
By doing so you risk killing the X10 Mini. And the money you paid for it and the screen of the Mini Pro, could have been used to purchase a Pro =P
And Again: Sorry for my too bad english....
Click to expand...
Click to collapse
Yes, that's really the best idea, sell your mini, and buy a pro, if you want DT... easier!

D4rKn3sSyS said:
Yes, that's really the best idea, sell your mini, and buy a pro, if you want DT... easier!
Click to expand...
Click to collapse
Yeah! A Colombian Coffee to celebrate.
You want owain??? Oh sorry, i forgot completely, you can't

Haaley said:
Yeah! A Colombian Coffee to celebrate.
You want owain??? Oh sorry, i forgot completely, you can't
Click to expand...
Click to collapse
hahaha Lol, lets drink colombian and brazilian coffe .. not you owain

Maybe if we add columbian coffe to the x10mini digitizer? It might work....

albanezi said:
Maybe if we add columbian coffe to the x10mini digitizer? It might work....
Click to expand...
Click to collapse
Yeah it might work. We'll give you the honor of be the first to try =D
Colombian & Brazilian Coffees rullez!

Haaley said:
Yeah it might work. We'll give you the honor of be the first to try =D
Colombian & Brazilian Coffees rullez!
Click to expand...
Click to collapse
I have a Mini Pro, seems like my patience to wait for the pro version has paid off these days.

Related

Bootloader

Is it possible to crack?
Like any other phone, but devs are playing with the big x10. The way to crack will be similiar. You have just to wait.
Sent from my E10i using XDA App
The bootloaders in our xperia X10 mini/mini pro and in X10 (big brother) are just the same. The devs are trying to crack the X10's bootloader. I hope they'll do that.
Send from my Xperia X10 mini using XDA premium app
Can ny1 plz tell me the Use of boot loader,,,,,,,,,,,,,,
Sorry for ma bad English
lavier said:
Can ny1 plz tell me the Use of boot loader,,,,,,,,,,,,,,
Sorry for ma bad English
Click to expand...
Click to collapse
As of now we can only use ROM's which are based on SE's crappy ROM. When/If the bootloader is cracked, we can start making custom kernels.
hi there
what exactly can change with custom kernel ?
regards
Oh, come on, not this thread again.... search with the search bar people!! It's there for something!
Sent from my X10mini
Lol, was just gonna say t same thing
loger8 said:
Oh, come on, not this thread again.... search with the search bar people!! It's there for something!
Sent from my X10mini
Click to expand...
Click to collapse
Sent from my X10mini using XDA App
X10 big brother now cracked
Sent from my X10i using XDA App
anders260 said:
X10 big brother now cracked
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Unless it's another April fool's.
VZAMaZ said:
Unless it's another April fool's.
Click to expand...
Click to collapse
It isn't. Today it's second of April, and zdzihu still persists. Anyone has any idea how much it is to port this to Mini? Looking forward to it!
/Daniel
OMFG! Glorious times are here! The bootloader of our big X10 has been bypassed!

[Q] x10 mini digitizer

Can't we buy the x10 mini pro digitizer and replace it with our x10 mini one, so we could then install the DT drivers for the x10 mini pro and have DT on our minis??(just curious)
Alexx237 said:
Can't we buy the x10 mini pro digitizer and replace it with our x10 mini one, so we could then install the DT drivers for the x10 mini pro and have DT on our minis??(just curious)
Click to expand...
Click to collapse
I believe no, because if you can succesfully replace it, there is no way to work, due to very different hw on the mini, ie: the soc of the dgtzr of the pro works only with the screen of pro so it is almost impossible afaik....
Alexx237 said:
Can't we buy the x10 mini pro digitizer and replace it with our x10 mini one, so we could then install the DT drivers for the x10 mini pro and have DT on our minis??(just curious)
Click to expand...
Click to collapse
Ours can still have DT if someone unloads the Touch driver, mods it and successfully loads it back.
Theshawty said:
Ours can still have DT if someone unloads the Touch driver, mods it and successfully loads it back.
Click to expand...
Click to collapse
this has already been done by doixanh. I dont know what else you want.
slade87 said:
this has already been done by doixanh. I dont know what else you want.
Click to expand...
Click to collapse
We haven't got real DT yet.
Theshawty said:
We haven't got real DT yet.
Click to expand...
Click to collapse
Do you even understand what slade said just now?
u still with the idea of custom kernel are u?
unbelievable...
riesan said:
u still with the idea of custom kernel are u? unbelievable...
Click to expand...
Click to collapse
Learn proper English before trying to argue with me.
Theshawty said:
Learn proper English before trying to argue with me.
Click to expand...
Click to collapse
so? i still understand what you are saying anyway... if you don't understand it's your bad....
i like the simple msgs of short sentence and you can't do anything bout it...
HA!
riesan said:
so? i still understand what you are saying anyway... if you don't understand it's your bad....
i like the simple msgs of short sentence and you can't do anything bout it...
HA!
Click to expand...
Click to collapse
What on earth are you trying to say? I need a translator from gibberish to English? No, I didn't fully understand what be meant but all I know is that we don't have real DT yet.
Theshawty, you CAN'T HAVE real dual/multitouch as on X10/X10 mp, because your screen DON'T SUPPORT IT, don't you read doixanh post?, so let it die like flash player , Im sorry
Regards,
D4.
we cannot have REAL DT indeed, that's why I put this post.
at first we were led to believe it supported DT because we thought the mini had a ClearPad 2000 (I think.. correct me if I'm wrong) which supports DT at max, turns out, our mini has ClearPad 1000 which is only for mono touch(or whatever it is called).
[Info from doixanh's post]
**** Sony Ericsson and their piece of **** phones. Too bad I cannot afford a better one...
It's easy to understand, he's jealous to x10mp guys
doixanh said:
It's easy to understand, he's jealous to x10mp guys
Click to expand...
Click to collapse
Both yes and no. I'm jealous that you have DT but I do hate hardware keyboards in phones.
Theshawty said:
Both yes and no. I'm jealous that you have DT but I do hate hardware keyboards in phones.
Click to expand...
Click to collapse
Pfff that was a terrible counterattack!! try a better one!! hardware keyboards + android = over 9000
??? Sent from my X10 Mini using XDA Premium App ???
If this happens to MP sure we won't believe it too....
at least mini has gesture pinch zoom....
be thankful to the DEV work so hard and trying to make this happen
it already make it better then a default SE without any of This
I agree, but DT wouldn't hurt would it? (I know we can't have any, I'm just saying..)
at the end, seriously, do we really need the dual touch support with this kind of little phone?
Termodonte said:
at the end, seriously, do we really need the dual touch support with this kind of little phone?
Click to expand...
Click to collapse
Yeah we do. For RPG games and such
Theshawty said:
Yeah we do. For RPG games and such
Click to expand...
Click to collapse
How? All the devs said that the mini DONT suport real dt, have you made any module that enables dt on mini? Or you have any other proof?

[Q] Multitouch

Hi, I've just question. Who is currently making on multitouch drivers?? Is here somebody?
xdomx said:
Hi, I've just question. Who is currently making on multitouch drivers?? Is here somebody?
Click to expand...
Click to collapse
I'm sure there is
Who knows, zdzihu might be on dormant making the drivers already.
Sad thing is, now we have gingerbread and basically everything final, lots of developers are leaving us, the X10 is OLD...
We would just have to wait---
i am also waiting for multi touch!
Prodigy said:
Sad thing is, now we have gingerbread and basically everything final, lots of developers are leaving us, the X10 is OLD...
We would just have to wait---
Click to expand...
Click to collapse
Exactly, I hope that MT will come earlier than I will thinking about to buy new phone
Check this if youll still dont have Dual Touch
Dual Touch for Flashtool
Not going to happen.. Sorry to ruin the dream
donmarquis said:
Check this if youll still dont have Dual Touch
Dual Touch for Flashtool
Click to expand...
Click to collapse
Of course I have dualtouch.... I am talking about multitouch not dualtouch..
---------- Post added at 01:39 AM ---------- Previous post was at 01:35 AM ----------
scoobysnacks said:
Not going to happen.. Sorry to ruin the dream
Click to expand...
Click to collapse
and how you know it? maybe it will
scoobysnacks said:
Not going to happen.. Sorry to ruin the dream
Click to expand...
Click to collapse
True but is it because of the screen or its because writing the drivers are too hard ?
Sent from my X10i using XDA Premium App
shahkam said:
True but is it because of the screen or its because writing the drivers are too hard ?
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
Well firstly no one knows for sure if it can do multi touch...
If theoretically we did, the drivers would probably take years to write from scratch.
scoobysnacks said:
Well firstly no one knows for sure if it can do multi touch...
If theoretically we did, the drivers would probably take years to write from scratch.
Click to expand...
Click to collapse
I think they can rewrite existing drivers (from neo, arc etc), but it's still hard.. so, will see if yes or not
xdomx said:
I think they can rewrite existing drivers (from neo, arc etc), but it's still hard.. so, will see if yes or not
Click to expand...
Click to collapse
No they can't...
Those phones have completely different hardware.
It doesn't work like that
scoobysnacks said:
No they can't...
Those phones have completely different hardware.
It doesn't work like that
Click to expand...
Click to collapse
yes, those phones have completely different HW but I think that MT drivers will be a LITTLE bit similar, so they can use something from that drivers and adjust it for our HW
xdomx said:
yes, those phones have completely different HW but I think that MT drivers will be a LITTLE bit similar, so they can use something from that drivers and adjust it for our HW
Click to expand...
Click to collapse
Why ask a question if you know the answer lol...
you already know more than me.
Sent from my X10i using Tapatalk
xdomx said:
yes, those phones have completely different HW but I think that MT drivers will be a LITTLE bit similar, so they can use something from that drivers and adjust it for our HW
Click to expand...
Click to collapse
It doesn't work like that at all....
Since you know all though obviously, go ahead and try lol
Prodigy said:
Why ask a question if you know the answer lol...
you already know more than me.
Sent from my X10i using Tapatalk
Click to expand...
Click to collapse
my question was, if somebody working on MT drivers.. btw I don't know more than you it was just my thinking
---------- Post added at 03:03 AM ---------- Previous post was at 02:43 AM ----------
scoobysnacks said:
It doesn't work like that at all....
Since you know all though obviously, go ahead and try lol
Click to expand...
Click to collapse
I'm not developer omg.....
xdomx said:
my question was, if somebody working on MT drivers.. btw I don't know more than you it was just my thinking
---------- Post added at 03:03 AM ---------- Previous post was at 02:43 AM ----------
I'm not developer omg.....
Click to expand...
Click to collapse
Obviously not, or you'd know how wrong what you're saying is
The X10 will never have multitouch. Every thing that touches our screen is given an x- and y-coordinate, and our screen is just capable of combining one x and one y. The dualtouch hack can be used because we don't mind if one x- coordinate is used in combination with the wrong y; we don' t need that for movements like pinch zoom. Try twisting south to north with two fingers in google maps and you'll know what I mean; when your fingers cross each other at a horizontal or vertical axis, your rotation movement will be inverted
Sent from my X10i using XDA Premium App
scoobysnacks said:
Obviously not, or you'd know how wrong what you're saying is
Click to expand...
Click to collapse
ok, sorry..
junkiejake said:
The X10 will never have multitouch. Every thing that touches our screen is given an x- and y-coordinate, and our screen is just capable of combining one x and one y. The dualtouch hack can be used because we don't mind if one x- coordinate is used in combination with the wrong y; we don' t need that for movements like pinch zoom. Try twisting south to north with two fingers in google maps and you'll know what I mean; when your fingers cross each other at a horizontal or vertical axis, your rotation movement will be inverted
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
Me and Z believe that this is due to the drivers in the MT chip.
junkiejake said:
The X10 will never have multitouch. Every thing that touches our screen is given an x- and y-coordinate, and our screen is just capable of combining one x and one y. The dualtouch hack can be used because we don't mind if one x- coordinate is used in combination with the wrong y; we don' t need that for movements like pinch zoom. Try twisting south to north with two fingers in google maps and you'll know what I mean; when your fingers cross each other at a horizontal or vertical axis, your rotation movement will be inverted
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
yes, I approximately know how dualtouch works.. but MT is not impossible with right drivers that someone has to do.. and I believe that our HW can support MT

port Xperia S music mod for Neo to mini pro

Could anyone plz port this for mini pro?
I know work is going on here to port xperia s music player for mini pro, but this looks more like a cosmetic mod.
The mod for neo also has functional elements like clearbass, surround in equalizer, option to edit tag etc.
Be patient, and that which involves around 79% will be good for you too.
Ok. I'l wait
I doubt we will fix the technical part, for example equalizer and parts that need to be edited with smali. If you could found someone who could do this, we'd be glad to team up.
Theonewithideas said:
I doubt we will fix the technical part, for example equalizer and parts that need to be edited with smali. If you could found someone who could do this, we'd be glad to team up.
Click to expand...
Click to collapse
Hope someone who could help you guys with it reads this post
it stuck in 79,5%. no progress at all.
rambg2 said:
it stuck in 79,5%. no progress at all.
Click to expand...
Click to collapse
I'm sure they are trying their best to make some progress.
rambg2 said:
it stuck in 79,5%. no progress at all.
Click to expand...
Click to collapse
Well, there's no factor that determines the exact percent...
And life's busy, I have to study a lot, finishing primary school in June etc. Otherwise I'd probably work more on it.
And we don't know how to edit smali.
yhu guys really did great job.........
Theonewithideas said:
Well, there's no factor that determines the exact percent...
And life's busy, I have to study a lot, finishing primary school in June etc. Otherwise I'd probably work more on it.
And we don't know how to edit smali.
Click to expand...
Click to collapse
Dude, you're in primary school??
That's for people ages 4-11! You sure?
Sent from my ST15i using XDA
ani55 said:
Dude, you're in primary school??
That's for people ages 4-11! You sure?
Sent from my ST15i using XDA
Click to expand...
Click to collapse
Going little off-topic...
Education is different between countries. Our primary school is from 7-15 .

Slade87 IS BACK! QWAHAHAHAHA!

slade is back.. he is active on nAa's JB thread
I didnt think anybody would remember me anymore
Thanks for all the welcome backs!
Man, you've been immortalized in the S2 paranoid android thread by D4. I've used your roms since froyo so I remember you been here for almost 2 years but I'm moving 8th of october
X10man
Sent from my U20i using xda premium
Never seen Slade87 , but wil also memorise him. He creates fixes for the nAa JB rom so fast that i am wonder of he is anytime sleeping .
thomas15v said:
Never seen Slade87 , but wil also memorise him. He creates fixes for the nAa JB rom so fast that i am wonder of he is anytime sleeping .
Click to expand...
Click to collapse
This guy doesn't sleep. He's a cluster of every single xperia phone ever made. THAT'S why he's so goddamn awesome. He had the first public ics for the mimmi. Everything was broken but he still did it
X10man
Sent from my U20i using xda premium
GREAT! welcome back slade, good to hear from you again. I hope anything went well while you were gone? :thumbup:
CM7&KernelbyNaA/XDA Premium
Great to have you back SLADE...................best developer in the forum
slade87 said:
I didnt think anybody would remember me anymore
Thanks for all the welcome backs!
Click to expand...
Click to collapse
there are a lot of ppl that still remember the old days, and all the devs, that have put his grain in this mobile phone.
The only way I remember slade87 is his GinTonic. Probably the fully working GB rom which I've used back then. Any chance that you'll develop new stuff/fixes for our phones?
Tom.K said:
Any chance that you'll develop new stuff/fixes for our phones?
Click to expand...
Click to collapse
I'll continue to fix the JB version of nAa MiniCM10, we decided today its best to put efforts together. Everything i find i'll send him and most likely post on the forums, if its conveniant enough, as hotfixes.
slade87 said:
I didnt think anybody would remember me anymore
Thanks for all the welcome backs!
Click to expand...
Click to collapse
How anybody could forget you? You are the best developer on x10 mini pro in history! I remember when you created one of first custom-kernel for our phone, it was amazing.
I hope that you will resume work on the GinTonic and/or ZombiePanic.
You are great, you know ? I think that older user of x10MP agree with me.
slade87 said:
I didnt think anybody would remember me anymore
Thanks for all the welcome backs!
Click to expand...
Click to collapse
i remember you,i used almost all your roms(each and every version) from froyo to ics
slade87 said:
I didnt think anybody would remember me anymore
Thanks for all the welcome backs!
Click to expand...
Click to collapse
We do remember you! Your name is in the golden history of our mini!!!! We can never forgot your efforts!
Even though I don't know you personally but your comming back gives me an intense deep pleasure in my heart!
Thank u slade87
—----—-------—--⅞
Back to MiniCM7!!!
slade87 said:
I didnt think anybody would remember me anymore
Thanks for all the welcome backs!
Click to expand...
Click to collapse
Yes i remember you all time my first custom kernel was zombiepanic With gintonic.SE thank you
Sent from my Sony Tablet S using xda premium
Hey Slade, I hope you make a work in the GB Roms... !
These are mores stable for our devices!!
I remember you always slade
Ive always watched your youtube video for ICS hahahaha
icerebro said:
Hey Slade, I hope you make a work in the GB Roms... !
These are mores stable for our devices!!
Click to expand...
Click to collapse
+1 on this!
those were the days, when gintonic+zombiepanic ruled our minis
Ha ha, this looks like some cult of personality growing here. But seriously, we have to give credit where credit is due for sure. I just came back from holiday where I kept myself offline deliberately only to get very pleasantly surprised now by two things - miniCM10 up and Slade back - unbelievable! Welcome and keep up the great work guys.
drfr said:
Ha ha, this looks like some cult of personality growing here. But seriously, we have to give credit where credit is due for sure. I just came back from holiday where I kept myself offline deliberately only to get very pleasantly surprised now by two things - miniCM10 up and Slade back - unbelievable! Welcome and keep up the great work guys.
Click to expand...
Click to collapse
Not only that, you will have stock apps for GB from Xperia S with SDE (working very good).
drfr said:
Ha ha, this looks like some cult of personality growing here. But seriously, we have to give credit where credit is due for sure. I just came back from holiday where I kept myself offline deliberately only to get very pleasantly surprised now by two things - miniCM10 up and Slade back - unbelievable! Welcome and keep up the great work guys.
Click to expand...
Click to collapse
woah! drfr welcome back also
you still did not apply for RC status

Categories

Resources