[Q] wcdma band - Optimus One, P500, V General

Hi everybody.
I purchased a unlocked gsm optimus t (t-mobile) in USA last week. Well, in my country we have a 850/1900 wcdma band (it seems the same at USA), but, i can´t conect to 3G network.
Searching for the phone specs, i find it the optimus t work in 1700/2100 network, it´s that correct??. If the answer is yes, it is possible to change wcdma frequency in this phone??.
Thanks for you help.
Pd: I read if i install a correct firmware for my country (Chile) is possible to change it.

I don't think so. There are 2 versions of the phone. I've bought mine in Chile, and no matter what ROM I use, I still can connect to the 3G network.
However, I think you should keep your phone and wait for Nextel or VTR networks to become operational, which will work on those bands.
You should see those 3G networks doing a network search on your mobile.
More info: http://www.mobileworldlive.com/maps/network.php?cid=2047&cname=Chile

Related

Network realted question. Please help!

Howzit guys,
I brought a HTC Aria in the USA on AT&T network. I came back to SA and rooted my phone put Android v2.2 on (phone came with v2.1) thinking that would unlock the phone, but it didn't. I ended up looking on the net for a website that I could get an unlock code for my phone. Long story short, I found one, paid for it and it worked. I'm using the phone on Vodacom no matter what I do I can't get 3G or HSDPA to work, only GPRS. HSDPA and 3G work fine in the states.
After doing some research I noticed that in the Mobile Network settings on the phone there is 3 options under Network Mode:
1. WCDMA only
2. GSM only
3.GSM / WCDMA auto
Now from what I've seen I need to use WCDMA to get the 3G / HSDPA to work, but when I select option 1. I don't get any signal and then phone eventually switches to GSM automatically. I was at work on the weekend helping a customer with her laptop and she had a 8•ta 3G modem, and 8•ta 3G modems are currently running off of MTN's network I was told this by an 8•ta technician and I noticed when connecting the modem it said something regarding WCDMA.
So now my question, if I change to MTN do you think I will be able to use 3G / HSDPA on my phone?
Any info regarding this will be greatly appreciated.
Thanks
The American version of the Aria uses different 3G frequencies (because that's what AT&T uses), so unfortunately your phone will not work with 3G in South Africa. There is a different version of the Aria (called Gratia in most regions) that is the exact same phone except it supports the correct 3G frequencies for your country, but there's nothing you can do with the phone you have now to make it work.

No 3G access on vodafone in India on my ATT SGS2

Hello All,
I am having issues connecting to the 3G network of Vodafone in India. My SGS2 is from AT&T and I was able to root it & unlock it and its works fine with the call and other stuff. I flashed the UnNamed v1.0.4 ROM and its been pretty stable.
But after activating my 3G service here, all I see is E with the 2 arrows. I researched online and saw that we need to change the CSC code. I looked up at the CSC code on my phone by dialing in *#272*<your IMEI># and its shows as ATT.
Can you please help me on how to change the CSC to INU (India Localisation) so that I can access the 3G network here.
Thanks
sammyguy said:
Hello All,
I am having issues connecting to the 3G network of Vodafone in India. My SGS2 is from AT&T and I was able to root it & unlock it and its works fine with the call and other stuff. I flashed the UnNamed v1.0.4 ROM and its been pretty stable.
But after activating my 3G service here, all I see is E with the 2 arrows. I researched online and saw that we need to change the CSC code. I looked up at the CSC code on my phone by dialing in *#272*<your IMEI># and its shows as ATT.
Can you please help me on how to change the CSC to INU (India Localisation) so that I can access the 3G network here.
Thanks
Click to expand...
Click to collapse
you probably just need to add your apn. Flash http://forum.xda-developers.com/showthread.php?t=1299705 its based on the international version so it might let you select your network.
First, make sure that Vodafone in India works in UMTS 850/1900/2100mhz bands. If they are using 900mhz band, this phone does not support it. As much as I know most European and Asian countries use either 900mhz or 2100mhz or both.
It could be frequency or any other issue but if you are looking to change your CSC then look up app "Samsung Galaxy S / S2 CSC" in the market and give it a try. Remember that your ROM has to support MultiCSC.
EDGE with data functioning is a clear sign of a band mismatch, not an APN issue.
Entropy512 said:
EDGE with data functioning is a clear sign of a band mismatch, not an APN issue.
Click to expand...
Click to collapse
+1
India is 2100mhz while the at&t sgsii is 850/1900 so 3g won't work. The t-mobile sgsii would work though, t-mobile's 3g frequency is 1700/2100.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
fone_fanatic said:
+1
India is 2100mhz while the at&t sgsii is 850/1900 so 3g won't work. The t-mobile sgsii would work though, t-mobile's 3g frequency is 1700/2100.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Click to expand...
Click to collapse
AT&T GS2 supports 850/1900/2100 3G bands. So, if the paticular carrier uses 900 for 3G, it won't work.
Or if it happens to use the 1700 MHz AWS band - but I don't know if any Indian carriers do.
Entropy512 said:
Or if it happens to use the 1700 MHz AWS band - but I don't know if any Indian carriers do.
Click to expand...
Click to collapse
1700 seems to be North America exclusive Rest of the world primarily use 900 and 2100 for 3G with Brazil and Austrialia also use 850 and 1900 in addition to 900 and 2100.

Galaxy S2 HD LTE (SHV-e120s)

Hi guys
I recently got one of these shipped over to Australia. Now I've encountered a few network issues I'd like help to resolve.
1. I think the only HSDPA/UMTS bands available are only 900/2100MHz. That means I can't get access to Telstra's Next G Network as it runs on 850MHz. Unfortunately I can't get access to the service mode at all and I've also downloaded the network app from the android market to see if I can change the band that way, but that doesn't help either - the app just crashes. I guess there's not much I can do there.
2. According to all the sites I've seen about the specs for the phone - LTE bands supported are 800/1800/2600MHz. But I can't seem to get on Telstra's LTE in sydney. The phone assumes that even with a Telstra sim, I'm on roaming with SK Telecom and it states that 4G roaming is now available. The aforementioned network app is set to "GSM/WCDMA/LTE auto" - yet no LTE!
Perhaps I could flash to another ROM? but I'm not sure which would be applicable? The LG Nitro HD has the closest specs in my opinion. Any help would be greatly appreciated.
milkyways2 said:
Hi guys
I recently got one of these shipped over to Australia. Now I've encountered a few network issues I'd like help to resolve.
1. I think the only HSDPA/UMTS bands available are only 900/2100MHz. That means I can't get access to Telstra's Next G Network as it runs on 850MHz. Unfortunately I can't get access to the service mode at all and I've also downloaded the network app from the android market to see if I can change the band that way, but that doesn't help either - the app just crashes. I guess there's not much I can do there.
2. According to all the sites I've seen about the specs for the phone - LTE bands supported are 800/1800/2600MHz. But I can't seem to get on Telstra's LTE in sydney. The phone assumes that even with a Telstra sim, I'm on roaming with SK Telecom and it states that 4G roaming is now available. The aforementioned network app is set to "GSM/WCDMA/LTE auto" - yet no LTE!
Perhaps I could flash to another ROM? but I'm not sure which would be applicable? The LG Nitro HD has the closest specs in my opinion. Any help would be greatly appreciated.
Click to expand...
Click to collapse
1. usually, bands are hardware limited. Meaning if you don't receive a particular band, you probably won't ever be able to.
2. what bands does Telstra's LTE operate on? #1 applies here too. If the LTE antenna in the phone doesn't receive the frequency your operator is transmitting on, there's not much you can do.
And in your "Perhaps", why would you even consider flashing a ROM for a completely different phone to yours???? (unless you WANTED to end up with a paperweight)
EDIT: Look at this thread. Specifically what's in post 2, which reads "So it doesn't matter where you buy the phone from, it will work on Telstra unless you go buy the korean version or something." Just googling your model number (SHV-E120S), it looks like that IS a Korean version of the phone. The fact that you say it says something about roaming for SK Telecom (a South Korean carrier) seems to support that.
EDIT 2: a quick google for the SHV-E120S turns up this page, which says the phone is for networks voice GSM900, GSM1800, GSM1900, data (HSPA+) UMTS900, UMTS2100, and LTE frequencies LTE 800, LTE 1800, LTE 2600.
According to Telstra's wikipedia page, HSPA on Telstra is UMTS850 and UMTS2100, and LTE is LTE1800. So you won't get full support on all of Telstra's bands with that model of phone.
It looks like you'll prob be stuck with 3G nextwork if you use this phone in AUS.
Remember: DO NOT try to flash ROMs that is not for your phone. I've tried this one time and ended up hard-bricking my phone. NEVER DO THIS!
ctomgee said:
1. usually, bands are hardware limited. Meaning if you don't receive a particular band, you probably won't ever be able to.
EDIT 2: a quick google for the SHV-E120S turns up this page, which says the phone is for networks voice GSM900, GSM1800, GSM1900, data (HSPA+) UMTS900, UMTS2100, and LTE frequencies LTE 800, LTE 1800, LTE 2600.
According to Telstra's wikipedia page, HSPA on Telstra is UMTS850 and UMTS2100, and LTE is LTE1800. So you won't get full support on all of Telstra's bands with that model of phone.
Click to expand...
Click to collapse
Ive read a number of XDA sites where people flash and install new modems with different bands. Woudl it be possible to install a 850MHz modem into the above phone?
claud001 said:
Ive read a number of XDA sites where people flash and install new modems with different bands. Woudl it be possible to install a 850MHz modem into the above phone?
Click to expand...
Click to collapse
Um, no. No flash will ever address a hardware limitation.
SHV-E120S Network problem...
milkyways2 said:
Hi guys
I recently got one of these shipped over to Australia. Now I've encountered a few network issues I'd like help to resolve.
1. I think the only HSDPA/UMTS bands available are only 900/2100MHz. That means I can't get access to Telstra's Next G Network as it runs on 850MHz. Unfortunately I can't get access to the service mode at all and I've also downloaded the network app from the android market to see if I can change the band that way, but that doesn't help either - the app just crashes. I guess there's not much I can do there.
2. According to all the sites I've seen about the specs for the phone - LTE bands supported are 800/1800/2600MHz. But I can't seem to get on Telstra's LTE in sydney. The phone assumes that even with a Telstra sim, I'm on roaming with SK Telecom and it states that 4G roaming is now available. The aforementioned network app is set to "GSM/WCDMA/LTE auto" - yet no LTE!
Perhaps I could flash to another ROM? but I'm not sure which would be applicable? The LG Nitro HD has the closest specs in my opinion. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Hello guys,
I am from Nepal. I have Samsung SHV-120S and when i was updating my phone phone went to dead boot mode. I did dead boot repair using riff JTAG and after flashing using 4.0.4 i am unable to use gsm only network cause i dont have hspda and above netoworks here. Any solution?
Inside of mobile networks there is just 2 option LTE Preferred and 3G Only... but i dont have 3G network and i dont know about lte network.
i had tried teamleader rom also but problem doesnt appears...
help somebody..
sim tower problem
ctomgee said:
1. usually, bands are hardware limited. Meaning if you don't receive a particular band, you probably won't ever be able to.
2. what bands does Telstra's LTE operate on? #1 applies here too. If the LTE antenna in the phone doesn't receive the frequency your operator is transmitting on, there's not much you can do.
And in your "Perhaps", why would you even consider flashing a ROM for a completely different phone to yours???? (unless you WANTED to end up with a paperweight)
EDIT: Look at this thread. Specifically what's in post 2, which reads "So it doesn't matter where you buy the phone from, it will work on Telstra unless you go buy the korean version or something." Just googling your model number (SHV-E120S), it looks like that IS a Korean version of the phone. The fact that you say it says something about roaming for SK Telecom (a South Korean carrier) seems to support that.
EDIT 2: a quick google for the SHV-E120S turns up this page, which says the phone is for networks voice GSM900, GSM1800, GSM1900, data (HSPA+) UMTS900, UMTS2100, and LTE frequencies LTE 800, LTE 1800, LTE 2600.
According to Telstra's wikipedia page, HSPA on Telstra is UMTS850 and UMTS2100, and LTE is LTE1800. So you won't get full support on all of Telstra's bands with that model of phone.
Click to expand...
Click to collapse
GALAXY S2 HD LTE SHV-120s
while I try to dial it says the message "not registered on network" and after some time it again gets connected to the network but during call 90% of the time it delivers problematic calling experience...
jak_roj said:
Hello guys,
I am from Nepal. I have Samsung SHV-120S and when i was updating my phone phone went to dead boot mode. I did dead boot repair using riff JTAG and after flashing using 4.0.4 i am unable to use gsm only network cause i dont have hspda and above netoworks here. Any solution?
Inside of mobile networks there is just 2 option LTE Preferred and 3G Only... but i dont have 3G network and i dont know about lte network.
i had tried teamleader rom also but problem doesnt appears...
help somebody..
Click to expand...
Click to collapse
I have the exactly same problem here, any idea guys?
med.bassia said:
I have the exactly same problem here, any idea guys?
Click to expand...
Click to collapse
hello guys,
i had the same problem using it in Albania and i find somewhere that you can access the hidden menu by entering at the dial pad the code: 319712358 pass:996412. then at "network settings" you can select GSM modes.
i'm still facing some problem with the calls but overall it's working.
hope it helps.
how could i activate or turn the 3g to 4g? im from PHI
---------- Post added at 07:09 AM ---------- Previous post was at 07:04 AM ----------
ggeku said:
hello guys,
i had the same problem using it in Albania and i find somewhere that you can access the hidden menu by entering at the dial pad the code: 319712358 pass:996412. then at "network settings" you can select GSM modes.
i'm still facing some problem with the calls but overall it's working.
hope it helps.
Click to expand...
Click to collapse
can't access this one. after typing the password. im stuck and nothing happen.
Jepss said:
how could i activate or turn the 3g to 4g? im from PHI
---------- Post added at 07:09 AM ---------- Previous post was at 07:04 AM ----------
can't access this one. after typing the password. im stuck and nothing happen.
Click to expand...
Click to collapse
if you are on JB (4.1.2) it should work or you can even try an app from google play "SKTHiddenMenu", practically does the same thing.
hmm does this unit has many problem??
i would like to root my phone but i still can't find the right apps to use
MrallSunday said:
hmm does this unit has many problem??
i would like to root my phone but i still can't find the right apps to use[/QU
me too i want to root my phone but i can't find the way too. even access the 4g i only access 3g.
Click to expand...
Click to collapse
ggeku said:
if you are on JB (4.1.2) it should work or you can even try an app from google play "SKTHiddenMenu", practically does the same thing.
Click to expand...
Click to collapse
yes im on JB 4.1.2. but i'd stuck on it. after i enter the password? it doesn't happen or it didnt went through. i already try to download the SKTHiddenMenu. when i tap the network it doesnt happen. why else can i do to activate the 4G on this phone?
oh im sorry maybe thats why it not work because im using shv e 120L not 120s im sorry.
so now do you know the password for shv e 120L or its the same with shv e 120s?

[Q] Samsung Galaxy S3 AT&T SGH-i747 3G not working in India

Hi,
Recently I happen to move to India from USA. I had Samsung Galaxy S3 - SGH i747 purchased in in US, which was under 2 year contract. I tried to call AT&T guys to give me unlock code but they didn't give me since my contract was not over.
I moved to India and tried to unlock my phone from local shop. I am able to make/receive calls now having these issues.
1. 3G is not working . When I see different available bands in my phone using *#2263#, it shows WCDMA 850, 900, 1700, 1900 and WCDMS IMT2000 under WCDMA band preferences. I am using Vodafone in India which runs on UMTS 2100. I visited Vodafone store couple of times but they are not able to help me. How do I get 2100 frequency in my phone ?
2. Currently I have set preference to run my phone on GSM Band so 2G is working. There are certain areas in my city where Vodafone 2G is also not working. In those areas, I don't receive any call even though I have very good network coverage. I tried switching off my mobile network in case I can receive calls but its of no help.
Request for your to resolve this. I am fed up with this nice working phone and need to purchase new one if these issues don't get resolved.
Thanks

Having problems getting 3G/4G to work on a LG L70 MetroPCS

Hello,
Last month my dad gave me as a gift a LG L70 bought from the US. I live in Romania and It was locked on MetroPCS, but I went to a local shop here in Romania and managed to unlock it. It works very nice and smooth, with one single problem: I can't manage to get the 3G/4G network to work on it. Everytime I open up the mobile data connection it remain stuck on 2G (showing E). Any ideas how I can get this to work?
The frequencies for the 3G network here in Romania, for my carrier are: 2100 and 900, but 900 is also used for the 2G network. The phone supports 900 Mhz and also the frequency for 4G, but both the 3G and the 4G won't work.
Many thanks!

Categories

Resources