Related
i have a htc legend with Blayo's 0.8 rom.
for a couple of weeks all works perfect but suddenly one day when i connected the htc to pc with USB cable nothing happened, only started to charge the battery. in the past the phone used to show a menu for choosing what type of connection had to use, but now didn't show anything.
i tried to reinstall HTCSync and the SDK but nothing changes.
i also tried with different usb cables but nothing
it's my legend bricked??
try to change the default connection type in Settings - Connect to PC..
i tried too but nothing changes
Try file expert or alternative, they have samba built in so you can ftp to your phone
Sent from my Legend using xda premium
yeah i'm Software Data Cable to send and recive files from Legend but if i want to change the rom i can't do it because pc doesn't detect the legend in fastboot and can't enter to recovery
roomm said:
yeah i'm Software Data Cable to send and recive files from Legend but if i want to change the rom i can't do it because pc doesn't detect the legend in fastboot and can't enter to recovery
Click to expand...
Click to collapse
why use cable? It´s so stoneage use wifi, and swiFTP app on your mobile and filezilla ftp on your pc to transfer your files. Then cmw to flash a new rom, you don´t have to be plugged in with your pc for that
Software Data Cable is like swiFTP, i can access my sdcard with filezilla.
the problem is that when i try to access to recovery to flash a new rom a triangle with a red exclamation appears and i have to push recovery from pc. i think that i don't have the recovery installed in my legend or something like that. with Rom Manager doesn't work, the same thing :S
roomm said:
Software Data Cable is like swiFTP, i can access my sdcard with filezilla.
the problem is that when i try to access to recovery to flash a new rom a triangle with a red exclamation appears and i have to push recovery from pc. i think that i don't have the recovery installed in my legend or something like that. with Rom Manager doesn't work, the same thing :S
Click to expand...
Click to collapse
When you get the triangle, have you tried push the volume button up and powerbutton.. ? What does rom manager say, you have installed cmw recovery?
mmmm i will try it! thnx!
EDIT: when i push volume up and powerbutton says: E:Can't oen /cache/recovery/command at the bottom of the screen. in the top a recovery like menu appears with Reboot system, apply sdcard:update.zip, wipe data/factory reset and wipe cache partition :S
NOOB ANSWER TIME:
Dunno if this is correct, but hey, we all learn, eh?
Make sure you have the correct version of CWM as an update.zip in the root of your SD. Then when you press VOL UP + PWR, choose to apply sdcard:update.zip. You'll launch into recovery from there.
oh! thank you! i didn't know that! i can enter into recovery! i want another rom, any recommendation? ( CM7 no please ) i think installing a new rom could fix the problem with the usb!
awww, man. did you try searching first before posting your problem? your phone isn't bricked. what you have is what's called around here as 'usb brick'. now, go here and get bzzzzz...
mm i think i don't have usb brick, because when USB Brick occurs pc can detect the htc in fastboot but i can't so i can't do the steps to fix the problem :S
any idea?
it's possible that the usb connector is broken?
Maybe there are someting wrong with your hardware....You may need to find the Costomer Service....
Sent from my HTC Legend using xda premium
hi, need help rooting Alcatel t10 tab. i already tried both superoneclick and unlockroot but to no avail.
thanks
http://forum.xda-developers.com/showthread.php?t=1886460
Work for my Alcatel OT T10
:good:
unfortunately, it didn't. how did you do it?
after so many attempts, it finally did it. i have to unroot to root again. tnx
Root for Alcatel OT T10
Root for Alcatel T10
Thanks to Bin4ry
I did it with the official PC's with Windows XP
Here's what I did:
1. I downloaded the latest version of the script from the link: http://forum.xda-developers.com/showthr ...? T = 1886460
2. Unzip it to a folder on the desktop.
3. I connected the tablet via USB cable to the computer (of course before I checked if I check the settings / options programmer / debug through USB)
4. I waited for the computer to install the drivers, ADB ...
5. Run the script and follow the instructions. (4. Other - selected device and on tablet I chose recovery when asked)
6. During the operation, the tablet will reboot itself twice. (Do not be afraid of the dark screen during rooting).
7. The script will display when everything is ready.
For me it was over in about 5-10 minutes. And I have a tablet with root
I tested all sorts of programs everything is OK. No lags, no crashes.
Success!
Sorry for my bad english
are you experiencing problems with time? such as time not updating when the screen is off?
kosio2002 said:
Root for Alcatel T10
Thanks to Bin4ry
I did it with the official PC's with Windows XP
Here's what I did:
1. I downloaded the latest version of the script from the link: http://forum.xda-developers.com/showthr ...? T = 1886460
2. Unzip it to a folder on the desktop.
3. I connected the tablet via USB cable to the computer (of course before I checked if I check the settings / options programmer / debug through USB)
4. I waited for the computer to install the drivers, ADB ...
5. Run the script and follow the instructions. (4. Other - selected device and on tablet I chose recovery when asked)
6. During the operation, the tablet will reboot itself twice. (Do not be afraid of the dark screen during rooting).
7. The script will display when everything is ready.
For me it was over in about 5-10 minutes. And I have a tablet with root
I tested all sorts of programs everything is OK. No lags, no crashes.
Success!
Sorry for my bad english
Click to expand...
Click to collapse
Hi,
I have a problem with point 4 "install the drivers, ADB"
I followed this guide
http://forums.acsyndicate.net/showt...LINUX-MAC-WINDOWS-Knives-amp-Forks-v-12-02-04
but does not work
the command "adb devices" respond with "device not found"
How do you install adb driver?
Thank you
How to install Android ADB/USB Drivers
http://www.youtube.com/watch?v=6IEdJZGQVI4
---------- Post added at 11:49 PM ---------- Previous post was at 11:44 PM ----------
maglev0730 said:
are you experiencing problems with time? such as time not updating when the screen is off?
Click to expand...
Click to collapse
For me there was no problem with the clock.
If you use an application, such as HD widgets, there is a setting in the options to save the battery, then when the tablet sleep, time does not change. Check it.
:good: Thank you so much. Works!!:laugh:
the link for the adb driver seems to be down. (
maglev0730 said:
the link for the adb driver seems to be down. (
Click to expand...
Click to collapse
http://www.batfish37.com/USB_ADB_Drivers/Thrive-USB-ADB-x86-x64-1.3.zip
kosio2002 said:
http://www.batfish37.com/USB_ADB_Drivers/Thrive-USB-ADB-x86-x64-1.3.zip
Click to expand...
Click to collapse
thanks a lot! youve been a great help
---------- Post added at 05:49 AM ---------- Previous post was at 05:18 AM ----------
will this work for 32 bit windows?
driver problem
i used the thrive driver. and it still dont detect my alcatel t10. what to do? help.
help
help, im installing chainfire3dpro on my rooted tablet then i accidentally checked the egl driver and tablet shuts down. now im stuck in a bootloop. i already tried the pinhole reset but no luck. i can't find the button combination to enter in the recovery to reset and wipe my data or tools to reset it. help me guys. im using alcatel tab t10
DMLRNDLL said:
help, im installing chainfire3dpro on my rooted tablet then i accidentally checked the egl driver and tablet shuts down. now im stuck in a bootloop. i already tried the pinhole reset but no luck. i can't find the button combination to enter in the recovery to reset and wipe my data or tools to reset it. help me guys. im using alcatel tab t10
Click to expand...
Click to collapse
SW Update via internal Flash or SD card
Before your tablet SW updating, you need to download SW package by access below link:
For Italy with HDMI：
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_403IT07_20120821_update_hdmi.rar
For EMEA Region without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120925_EMEA_CPT_update.rar
For LATAM Region without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120926_LATAM_CPT_update.rar
For Philippines without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120926_Philippines_CPT_update.rar
Then, you can take below steps to download SW of your tablet.
1. Copy SW with the name of “update.img” to the root directory of ISD card (on you PC with cardreader) and uncheck “Read-only” in the file’s property.
2. Insert SD in tablet... Reboot
giotzkie05 said:
i used the thrive driver. and it still dont detect my alcatel t10. what to do? help.
Click to expand...
Click to collapse
3. I connected the tablet via USB cable to the computer (of course before I checked if I check the settings / options programmer / debug through USB)
kosio2002 said:
SW Update via internal Flash or SD card
Before your tablet SW updating, you need to download SW package by access below link:
For Italy with HDMI：
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_403IT07_20120821_update_hdmi.rar
For EMEA Region without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120925_EMEA_CPT_update.rar
For LATAM Region without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120926_LATAM_CPT_update.rar
For Philippines without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120926_Philippines_CPT_update.rar
Then, you can take below steps to download SW of your tablet.
1. Copy SW with the name of “update.img” to the root directory of ISD card (on you PC with cardreader) and uncheck “Read-only” in the file’s property.
2. Insert SD in tablet... Reboot
Click to expand...
Click to collapse
i extracted the file, rename it to "update.img", i unchecked the read-only, put it to the root of sd card and reboot it and still no luck.. do you mean internal sd card? i cant copy it to the internal sd, only on external sdcard.. because i cant turn on my tablet. when i turn it on, the alcatel onetouch showed up then turns black and nothing happens. help please
DMLRNDLL said:
i extracted the file, rename it to "update.img", i unchecked the read-only, put it to the root of sd card and reboot it and still no luck.. do you mean internal sd card? i cant copy it to the internal sd, only on external sdcard.. because i cant turn on my tablet. when i turn it on, the alcatel onetouch showed up then turns black and nothing happens. help please
Click to expand...
Click to collapse
Reboot with pin. (Before you rename the file, you unzip it (winrar)? in my case the tablet will automatically detect update.img and display a dialog box to update the OS.)
kosio2002 said:
Reboot with pin. (Before you rename the file, you unzip it (winrar)? in my case the tablet will automatically detect update.img and display a dialog box to update the OS.)
Click to expand...
Click to collapse
yes, i unzip the file file first then rename it with update.zip then turn off my tab via pinhole then turn it on. no dialog showede up..
thank you! it works perfect
Hi All,
Need some help. My Samsung S3 mini i2800L was flashed with the wrong firmware in an attempt to upgrade to Jellybean 4.2.2 using odin and it failed . It remained in download mode and I did a battery pull ,now the phone is absolutely dead. Black Screen for all the following:Recovery Mode and Download Mode .The phone wont power on at all. The only sign of life , is when I plugged into my girl friend's Toshiba laptop via usb cable and it searched and installed the drivers.In addition Windows makes a sound when the device is plugged in and unplugged, but is not being recognized by Kies or Odin. I also tried a USB JIG with no success.
Is there any debrick file that I can use for to place on my SD card and attempt to boot from SD, or is JTAG the only option left?
yes!!! you can UNBrick it!!!
OK ... good news for you is it can still be read by the comp when connected (prompts by audio signal) ... it wont take more than 2 min to unbrick your phone... tell me have if you have a stock ROM available for your device?
unbrick Samsung galaxy s3 mini
omkarfrozen said:
OK ... good news for you is it can still be read by the comp when connected (prompts by audio signal) ... it wont take more than 2 min to unbrick your phone... tell me have if you have a stock ROM available for your device?
Click to expand...
Click to collapse
Yes I have downloaded a stock ROM from the internet that can be used. My phone is unlocked so I just downloaded a open firmware , please guide me on the steps required and thanks for responding BTW.
Leon bernard said:
Yes I have downloaded a stock ROM from the internet that can be used. My phone is unlocked so I just downloaded a open firmware , please guide me on the steps required and thanks for responding BTW.
Click to expand...
Click to collapse
have you downloaded SP flash tool along with it??? if not then search for that tool on needrom website... now turn off your phone by removing the battery... now open the SP flash tool and select the Scatter-Loading file present in your stock ROM folder... now click download button... then quickly connect your phone via USB... wait for 5 min ... you will get a message box with green circle and you are done!!! use your phone as you used to earlier...
will try it
omkarfrozen said:
have you downloaded SP flash tool along with it??? if not then search for that tool on needrom website... now turn off your phone by removing the battery... now open the SP flash tool and select the Scatter-Loading file present in your stock ROM folder... now click download button... then quickly connect your phone via USB... wait for 5 min ... you will get a message box with green circle and you are done!!! use your phone as you used to earlier...
Click to expand...
Click to collapse
Wow. Im going to try this when I reach home from work today, I will let you know if it works. Thanks a million
how to access scatter loading file
Leon bernard said:
Wow. Im going to try this when I reach home from work today, I will let you know if it works. Thanks a million
Click to expand...
Click to collapse
Hi ,
So I have the stock rom but its in md.5 format so I cant access the directories. Is their anyway I can convert it so I can access the scatter loading file ?
omkarfrozen said:
have you downloaded SP flash tool along with it??? if not then search for that tool on needrom website... now turn off your phone by removing the battery... now open the SP flash tool and select the Scatter-Loading file present in your stock ROM folder... now click download button... then quickly connect your phone via USB... wait for 5 min ... you will get a message box with green circle and you are done!!! use your phone as you used to earlier...
Click to expand...
Click to collapse
Hi ,
So I have the stock rom but its in md.5 format so I cant access the directories. Is their anyway I can convert it so I can access the scatter loading file ?
Leon bernard said:
Hi ,
So I have the stock rom but its in md.5 format so I cant access the directories. Is their anyway I can convert it so I can access the scatter loading file ?
Click to expand...
Click to collapse
OK if you have stock ROM in md5 then follow these steps
1) copy the md5 file on desktop
2. Download Odin 3.07
3. Switch off your phone and boot Galaxy S3 Mini I8200L into Download
Mode by pressing and holding the Volume Down+Home+Power buttons
(long press until the boot screen appear), now press Volume Up key to
proceed to Download Mode .IN CASE IT doesn't WORK TRY EVERY COMBINATION SO AS TO ACHIEVE 6TH STEP... IF NOTHING WORKS THEN JUST CONNECT THE PHONE WITHOUT PRESSING ANY COMBINATIONS...
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe
file as an administrator (Right click on the .exe file and click on Run as
administrator)
5. Now connect your Galaxy S3 Mini I8200L to your computer via USB
cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at
ID:COM section and “Added!” text at the message box. This means your
device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are
checked.
8. Now, extract the downloaded firmware .zip file, you’ll find a firmware file
with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with
.tar.md5 extension (The firmware file look something like:
I8200LXXDLJ5_I8200LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few
moments.
11. Once completed, you would see “PASS!” message in ID:COM port having
green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish.
omkarfrozen said:
OK if you have stock ROM in md5 then follow these steps
1) copy the md5 file on desktop
2. Download Odin 3.07
3. Switch off your phone and boot Galaxy S3 Mini I8200L into Download
Mode by pressing and holding the Volume Down+Home+Power buttons
(long press until the boot screen appear), now press Volume Up key to
proceed to Download Mode .IN CASE IT doesn't WORK TRY EVERY COMBINATION SO AS TO ACHIEVE 6TH STEP... IF NOTHING WORKS THEN JUST CONNECT THE PHONE WITHOUT PRESSING ANY COMBINATIONS...
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe
file as an administrator (Right click on the .exe file and click on Run as
administrator)
5. Now connect your Galaxy S3 Mini I8200L to your computer via USB
cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at
ID:COM section and “Added!” text at the message box. This means your
device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are
checked.
8. Now, extract the downloaded firmware .zip file, you’ll find a firmware file
with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with
.tar.md5 extension (The firmware file look something like:
I8200LXXDLJ5_I8200LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few
moments.
11. Once completed, you would see “PASS!” message in ID:COM port having
green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish.
Click to expand...
Click to collapse
Sigh , unfortunately odin is not detecting my phone at all. Remember that the phone is completely dead, which means it cant power on or go any mode . I think the SP Flash tool would work but I need the scatter file
Leon bernard said:
Sigh , unfortunately odin is not detecting my phone at all. Remember that the phone is completely dead, which means it cant power on or go any mode . I think the SP Flash tool would work but I need the scatter file
Click to expand...
Click to collapse
Download Samsung mobile drivers... Because you had said your friends laptopts prompts when you connect your mobile to his laptop. So remember 1thñg your phone is not completely dead yet. try if flash ROM from his laptop
omkarfrozen said:
Download Samsung mobile drivers... Because you had said your friends laptopts prompts when you connect your mobile to his laptop. So remember 1thñg your phone is not completely dead yet. try if flash ROM from his laptop
Click to expand...
Click to collapse
Ok so update: I downloaded Keis and installed all drivers. I recognized now that the phone is connecting as EMEI on PC. I clicked on it uninstall the drivers and re install it , but ODIN nor Keis still does not recognize phone , only computer recognizes phone as EMEI. Let me know your views.
Leon bernard said:
Ok so update: I downloaded Keis and installed all drivers. I recognized now that the phone is connecting as EMEI on PC. I clicked on it uninstall the drivers and re install it , but ODIN nor Keis still does not recognize phone , only computer recognizes phone as EMEI. Let me know your views.
Click to expand...
Click to collapse
get your Samsung usb drivers from here developer.samsung .com /board/download.do?bdId=0000000700&attachId=0000000001 (remove the spaces in between). give me some time so that I can find scatter file for your phone.
omkarfrozen said:
get your Samsung usb drivers from here developer.samsung .com /board/download.do?bdId=0000000700&attachId=0000000001 (remove the spaces in between). give me some time so that I can find scatter file for your phone.
Click to expand...
Click to collapse
drivers downloaded and installed. I await the scatter file. thanks for your efforts .
Leon bernard said:
Hi All,
Need some help. My Samsung S3 mini i2800L was flashed with the wrong firmware in an attempt to upgrade to Jellybean 4.2.2 using odin and it failed . It remained in download mode and I did a battery pull ,now the phone is absolutely dead. Black Screen for all the following:Recovery Mode and Download Mode .The phone wont power on at all. The only sign of life , is when I plugged into my girl friend's Toshiba laptop via usb cable and it searched and installed the drivers.In addition Windows makes a sound when the device is plugged in and unplugged, but is not being recognized by Kies or Odin. I also tried a USB JIG with no success.
Is there any debrick file that I can use for to place on my SD card and attempt to boot from SD, or is JTAG the only option left?
Click to expand...
Click to collapse
follow this brick
Help me too
Leon bernard said:
drivers downloaded and installed. I await the scatter file. thanks for your efforts .
Click to expand...
Click to collapse
I got the exact same issue.. my phone is samsung galaxy s3 mini. i will be very happy if you would also find the scatter file (although i still have no idea what is that) for my phone too, while i google it. i'm newbie, i'm not really sure what to find.. help me.. :crying:
tebegaya said:
I got the exact same issue.. my phone is samsung galaxy s3 mini. i will be very happy if you would also find the scatter file (although i still have no idea what is that) for my phone too, while i google it. i'm newbie, i'm not really sure what to find.. help me.. :crying:
Click to expand...
Click to collapse
Hey guys am using samsung s3 mini GT I8190, i recently flashed cyanogenmode 5.1.1 on my device, it was working fine but i decided to do a nandroid back up and in the process my phone died. it cannot power on or go to downloading mode. When i connect to my laptop there is a sound that its connected but then it disconnects help please..
omkarfrozen said:
OK if you have stock ROM in md5 then follow these steps
1) copy the md5 file on desktop
2. Download Odin 3.07
3. Switch off your phone and boot Galaxy S3 Mini I8200L into Download
Mode by pressing and holding the Volume Down+Home+Power buttons
(long press until the boot screen appear), now press Volume Up key to
proceed to Download Mode .IN CASE IT doesn't WORK TRY EVERY COMBINATION SO AS TO ACHIEVE 6TH STEP... IF NOTHING WORKS THEN JUST CONNECT THE PHONE WITHOUT PRESSING ANY COMBINATIONS...
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe
file as an administrator (Right click on the .exe file and click on Run as
administrator)
5. Now connect your Galaxy S3 Mini I8200L to your computer via USB
cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at
ID:COM section and “Added!” text at the message box. This means your
device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are
checked.
8. Now, extract the downloaded firmware .zip file, you’ll find a firmware file
with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with
.tar.md5 extension (The firmware file look something like:
I8200LXXDLJ5_I8200LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few
moments.
11. Once completed, you would see “PASS!” message in ID:COM port having
green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish.
Click to expand...
Click to collapse
Hello, i need some help. I have tried all but always shows faild...i even use a recovery.tar and the bar goes all the way to the end but when the procces its almost finish it shows FAIL.
What can i do?
I do have the firmwarew file and it does not work, thx
Hi all,
I am in desperate need of ya'llz help! Recently I followed the following instructions to the dot:
http://forum.xda-developers.com/showthread.php?t=2703774
in order to get root on 10.4.1.B.0.109. I ended up, like the author of the thread, in the so called bootloop. Tried everything and eventually managed to get out and restored to root 4.1.2. Thats where I am now.
The tablet works fine, however i am unable to connect to my pc with USB and also unable to charge via the charger. The tab is not detected in my computer, nor PC companion. Mass storage mode nor media mode work. I tried swapping cables, same.
The only thing I am able to get working through USB is charging when the tab is powered off, which means that the USB port is not broken.
I was thinking that updating would fix the problem, so I tried updating directly from the System update in the tab. It downloads 109, then restarts to install it, comes back with: "Could not install"!
Now my tab is not detected on my PC when its on, what to do ? How to update/Fix the USB problem!?
Any help is greatly appreciated!
Update
Ok I realized that the plugged cable only makes the red LED on the left light up, and when i click the power button, I see the battery picture in the display. Showing half charged. But the actual charge is not increasing.
Unplugging the USB, turns off the LED!
Help!
No ideas anyone? It charges from dead till medium. But no USB connection to the PC is possible! Cant update
centinel_x said:
No ideas anyone? It charges from dead till medium. But no USB connection to the PC is possible! Cant update
Click to expand...
Click to collapse
put your sd card in an adapter, put that in your pc and copy a zip with a full rom on it, put it back in your tablet and install the rom? Or try a different usb cable, maybe it's broken
centinel_x said:
No ideas anyone? It charges from dead till medium. But no USB connection to the PC is possible! Cant update
Click to expand...
Click to collapse
hold power + Vol+ to reset device and after that try to connect to pc to flash in flashtool.
Thanx
Hi guys,
thanks for the replies. Ive tried those already. Ive tried all different types of roms. The problem is that you need a restore image such as dual recovery on the tablet. Its rooted but there is not way to install a recovery image on it, without using a computer. And since it wont connect to the PC, no way..
:/
Hi all,
I'm in a complete head spin so I'm hoping someone here could shed some light on an issue I'm facing.
As the title says, I currently have a Buzz TV XPL 3000 android box. I'm trying to flash "Aidan's Android TV Custom Rom" onto it. But no matter what I try to do, I simply cannot get the Buzz TV box to interact with my Windows 10 PC.
I have 2 different male-to-male USB cables that I've tried plugging into the box and into my PC, but there is no link between them. The PC nor the Android box don't acknowledge any kind of connection. I know a lot of people will probably say that my cables aren't data cables, but I've actually used one of them previously to flash another Android device.
Whenever I plug the USB cables into my Android box and PC, the ONLY thing that happens, is the PC powers up the Android box. I've tried turning on USB debugging tools from the developer menu, but nothing. The PC doesn't even make a sound when I plug the cable in and there is nothing listed under device manager. Nothing appears on USB Burning Tools under devices.. Just nothing.
I've tried plugging in the USB cable, while holding down the reset button (located on the bottom of the box), but all that does is power on the Android box and load into "Android Recover". Still nothing detected on USB Burning Tools and still no acknowledgement from the PC that a USB device has been connected.
The options I get in the Android Recovery menu are:
Reboot System Now
Apply Update From EXT
Apply Update From Data
Wipe Data/Factory Reset
Wipe Cache Partition
Burn Keys
I've tried selecting "Apply Update From EXT" and manually selecting the .img file. But it says it cannot verify the signature.
I'm literally out of ideas. Can anyone who knows what they're doing please help me!
TheOneIsBack said:
Hi all,
I'm in a complete head spin so I'm hoping someone here could shed some light on an issue I'm facing.
As the title says, I currently have a Buzz TV XPL 3000 android box. I'm trying to flash "Aidan's Android TV Custom Rom" onto it. But no matter what I try to do, I simply cannot get the Buzz TV box to interact with my Windows 10 PC.
I have 2 different male-to-male USB cables that I've tried plugging into the box and into my PC, but there is no link between them. The PC nor the Android box don't acknowledge any kind of connection. I know a lot of people will probably say that my cables aren't data cables, but I've actually used one of them previously to flash another Android device.
Whenever I plug the USB cables into my Android box and PC, the ONLY thing that happens, is the PC powers up the Android box. I've tried turning on USB debugging tools from the developer menu, but nothing. The PC doesn't even make a sound when I plug the cable in and there is nothing listed under device manager. Nothing appears on USB Burning Tools under devices.. Just nothing.
I've tried plugging in the USB cable, while holding down the reset button (located on the bottom of the box), but all that does is power on the Android box and load into "Android Recover". Still nothing detected on USB Burning Tools and still no acknowledgement from the PC that a USB device has been connected.
The options I get in the Android Recovery menu are:
Reboot System Now
Apply Update From EXT
Apply Update From Data
Wipe Data/Factory Reset
Wipe Cache Partition
Burn Keys
I've tried selecting "Apply Update From EXT" and manually selecting the .img file. But it says it cannot verify the signature.
I'm literally out of ideas. Can anyone who knows what they're doing please help me!
Click to expand...
Click to collapse
Hi, You Might Have To Try And Figure Out Mask rom Mode To Force your Device To Be Detected By USB Burn Tool If Using The Reset Button is Unsuccessful, Look For Mask rom Mode Information, You Can Upload Pictures Of Both Sides Of Your Logic Board we can try and figure it out
aidanmacgregor said:
Hi, You Might Have To Try And Figure Out Mask rom Mode To Force your Device To Be Detected By USB Burn Tool If Using The Reset Button is Unsuccessful, Look For Mask rom Mode Information, You Can Upload Pictures Of Both Sides Of Your Logic Board we can try and figure it out
Click to expand...
Click to collapse
Hey man,
Thanks for taking the time to reply.
I managed to get it working. Decided to give it another shot this morning and for some reason, first time around it worked. USB Burning Tool instantly picked the box up, installed perfectly and now I have it up and running!! It definitely seems a lot more snappier than my last firmware.
I do have a question though. With the previous stock firmware, my TV would pick the Android box up with a HDR signal. It no longer does this now. Is that to be expected with this rom or is there something I need to do?
Sir
TheOneIsBack said:
Hi all,
I'm in a complete head spin so I'm hoping someone here could shed some light on an issue I'm facing.
As the title says, I currently have a Buzz TV XPL 3000 android box. I'm trying to flash "Aidan's Android TV Custom Rom" onto it. But no matter what I try to do, I simply cannot get the Buzz TV box to interact with my Windows 10 PC.
I have 2 different male-to-male USB cables that I've tried plugging into the box and into my PC, but there is no link between them. The PC nor the Android box don't acknowledge any kind of connection. I know a lot of people will probably say that my cables aren't data cables, but I've actually used one of them previously to flash another Android device.
Whenever I plug the USB cables into my Android box and PC, the ONLY thing that happens, is the PC powers up the Android box. I've tried turning on USB debugging tools from the developer menu, but nothing. The PC doesn't even make a sound when I plug the cable in and there is nothing listed under device manager. Nothing appears on USB Burning Tools under devices.. Just nothing.
I've tried plugging in the USB cable, while holding down the reset button (located on the bottom of the box), but all that does is power on the Android box and load into "Android Recover". Still nothing detected on USB Burning Tools and still no acknowledgement from the PC that a USB device has been connected.
The options I get in the Android Recovery menu are:
Reboot System Now
Apply Update From EXT
Apply Update From Data
Wipe Data/Factory Reset
Wipe Cache Partition
Burn Keys
I've tried selecting "Apply Update From EXT" and manually selecting the .img file. But it says it cannot verify the signature.
I'm literally out of ideas. Can anyone who knows what they're doing please help me!
Click to expand...
Click to collapse
i just bought this buzz tv box. can you guide me ? Like how to root? Which is the best rom? Best apps ? Adaway etc?