hi, need help rooting Alcatel t10 tab. i already tried both superoneclick and unlockroot but to no avail.
thanks
http://forum.xda-developers.com/showthread.php?t=1886460
Work for my Alcatel OT T10
:good:
unfortunately, it didn't. how did you do it?
after so many attempts, it finally did it. i have to unroot to root again. tnx
Root for Alcatel OT T10
Root for Alcatel T10
Thanks to Bin4ry
I did it with the official PC's with Windows XP
Here's what I did:
1. I downloaded the latest version of the script from the link: http://forum.xda-developers.com/showthr ...? T = 1886460
2. Unzip it to a folder on the desktop.
3. I connected the tablet via USB cable to the computer (of course before I checked if I check the settings / options programmer / debug through USB)
4. I waited for the computer to install the drivers, ADB ...
5. Run the script and follow the instructions. (4. Other - selected device and on tablet I chose recovery when asked)
6. During the operation, the tablet will reboot itself twice. (Do not be afraid of the dark screen during rooting).
7. The script will display when everything is ready.
For me it was over in about 5-10 minutes. And I have a tablet with root
I tested all sorts of programs everything is OK. No lags, no crashes.
Success!
Sorry for my bad english
are you experiencing problems with time? such as time not updating when the screen is off?
kosio2002 said:
Root for Alcatel T10
Thanks to Bin4ry
I did it with the official PC's with Windows XP
Here's what I did:
1. I downloaded the latest version of the script from the link: http://forum.xda-developers.com/showthr ...? T = 1886460
2. Unzip it to a folder on the desktop.
3. I connected the tablet via USB cable to the computer (of course before I checked if I check the settings / options programmer / debug through USB)
4. I waited for the computer to install the drivers, ADB ...
5. Run the script and follow the instructions. (4. Other - selected device and on tablet I chose recovery when asked)
6. During the operation, the tablet will reboot itself twice. (Do not be afraid of the dark screen during rooting).
7. The script will display when everything is ready.
For me it was over in about 5-10 minutes. And I have a tablet with root
I tested all sorts of programs everything is OK. No lags, no crashes.
Success!
Sorry for my bad english
Click to expand...
Click to collapse
Hi,
I have a problem with point 4 "install the drivers, ADB"
I followed this guide
http://forums.acsyndicate.net/showt...LINUX-MAC-WINDOWS-Knives-amp-Forks-v-12-02-04
but does not work
the command "adb devices" respond with "device not found"
How do you install adb driver?
Thank you
How to install Android ADB/USB Drivers
http://www.youtube.com/watch?v=6IEdJZGQVI4
---------- Post added at 11:49 PM ---------- Previous post was at 11:44 PM ----------
maglev0730 said:
are you experiencing problems with time? such as time not updating when the screen is off?
Click to expand...
Click to collapse
For me there was no problem with the clock.
If you use an application, such as HD widgets, there is a setting in the options to save the battery, then when the tablet sleep, time does not change. Check it.
:good: Thank you so much. Works!!:laugh:
the link for the adb driver seems to be down. (
maglev0730 said:
the link for the adb driver seems to be down. (
Click to expand...
Click to collapse
http://www.batfish37.com/USB_ADB_Drivers/Thrive-USB-ADB-x86-x64-1.3.zip
kosio2002 said:
http://www.batfish37.com/USB_ADB_Drivers/Thrive-USB-ADB-x86-x64-1.3.zip
Click to expand...
Click to collapse
thanks a lot! youve been a great help
---------- Post added at 05:49 AM ---------- Previous post was at 05:18 AM ----------
will this work for 32 bit windows?
driver problem
i used the thrive driver. and it still dont detect my alcatel t10. what to do? help.
help
help, im installing chainfire3dpro on my rooted tablet then i accidentally checked the egl driver and tablet shuts down. now im stuck in a bootloop. i already tried the pinhole reset but no luck. i can't find the button combination to enter in the recovery to reset and wipe my data or tools to reset it. help me guys. im using alcatel tab t10
DMLRNDLL said:
help, im installing chainfire3dpro on my rooted tablet then i accidentally checked the egl driver and tablet shuts down. now im stuck in a bootloop. i already tried the pinhole reset but no luck. i can't find the button combination to enter in the recovery to reset and wipe my data or tools to reset it. help me guys. im using alcatel tab t10
Click to expand...
Click to collapse
SW Update via internal Flash or SD card
Before your tablet SW updating, you need to download SW package by access below link:
For Italy with HDMI：
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_403IT07_20120821_update_hdmi.rar
For EMEA Region without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120925_EMEA_CPT_update.rar
For LATAM Region without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120926_LATAM_CPT_update.rar
For Philippines without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120926_Philippines_CPT_update.rar
Then, you can take below steps to download SW of your tablet.
1. Copy SW with the name of “update.img” to the root directory of ISD card (on you PC with cardreader) and uncheck “Read-only” in the file’s property.
2. Insert SD in tablet... Reboot
giotzkie05 said:
i used the thrive driver. and it still dont detect my alcatel t10. what to do? help.
Click to expand...
Click to collapse
3. I connected the tablet via USB cable to the computer (of course before I checked if I check the settings / options programmer / debug through USB)
kosio2002 said:
SW Update via internal Flash or SD card
Before your tablet SW updating, you need to download SW package by access below link:
For Italy with HDMI：
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_403IT07_20120821_update_hdmi.rar
For EMEA Region without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120925_EMEA_CPT_update.rar
For LATAM Region without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120926_LATAM_CPT_update.rar
For Philippines without HDMI:
https://teleweb3.tcl-ta.com/TELEWEB/CPM/T10_V1.0.14_20120926_Philippines_CPT_update.rar
Then, you can take below steps to download SW of your tablet.
1. Copy SW with the name of “update.img” to the root directory of ISD card (on you PC with cardreader) and uncheck “Read-only” in the file’s property.
2. Insert SD in tablet... Reboot
Click to expand...
Click to collapse
i extracted the file, rename it to "update.img", i unchecked the read-only, put it to the root of sd card and reboot it and still no luck.. do you mean internal sd card? i cant copy it to the internal sd, only on external sdcard.. because i cant turn on my tablet. when i turn it on, the alcatel onetouch showed up then turns black and nothing happens. help please
DMLRNDLL said:
i extracted the file, rename it to "update.img", i unchecked the read-only, put it to the root of sd card and reboot it and still no luck.. do you mean internal sd card? i cant copy it to the internal sd, only on external sdcard.. because i cant turn on my tablet. when i turn it on, the alcatel onetouch showed up then turns black and nothing happens. help please
Click to expand...
Click to collapse
Reboot with pin. (Before you rename the file, you unzip it (winrar)? in my case the tablet will automatically detect update.img and display a dialog box to update the OS.)
kosio2002 said:
Reboot with pin. (Before you rename the file, you unzip it (winrar)? in my case the tablet will automatically detect update.img and display a dialog box to update the OS.)
Click to expand...
Click to collapse
yes, i unzip the file file first then rename it with update.zip then turn off my tab via pinhole then turn it on. no dialog showede up..
thank you! it works perfect
Related
i downloaded the Uruikdroid 1 to install my 3G USB dongle on Archos 101, but the operation failed, then i tried to remove this software and clean up my Archos to its default settings but i got stuck
every time i open my Archos shows me white screen with title: Archos A101IT Recovery
No
Reboot
Update Firmware
Repair System
Format System
i tried every choice but nothing happen, the same white screen
i tried to connect it to my PC with USB connection but nothing happened too :-((
plz help me , plz
Click on "update firmware" and plug the USB cable in, when you can access the storage, copy this file into the archos. http://update.archos.com/8/gen8/gen8_2.3.26/firmware_archos_android_gen8.aos
thx marclh very much , really u made my day
update failed
internalspirit said:
thx marclh very much , really u made my day
Click to expand...
Click to collapse
I tried this several times, when I copy and paste the update file into the 101it via usb cable to my laptop, nothing happens, how do I open the program file in order to paste the new update onto the tablet???
jeanuhlik said:
I tried this several times, when I copy and paste the update file into the 101it via usb cable to my laptop, nothing happens, how do I open the program file in order to paste the new update onto the tablet???
Click to expand...
Click to collapse
Try to redownload the firmware, corrupted file can be the cause of update failure. Also be sure to safely remove the device before starting the update.
You know how to get into recovery to update the firmware? Hold down the volume down button while starting your device. After a while a white screen should appear with your recovery menu. When that happens let go of the volume down button. Navigate with volume down-up and power to select.
divx118
Recently i've been seeing ALOT of queries about how to root the Softwiner EVB Android Tablet
I have one myself and found a way and have tried and successfully completed the process myself.
This is an easy 6 step process. Basically this is what you do.
1. Back your tablet up, probably to your PC, laptop or whatever.
2. Factory reset it so everything is wiped, it should restart
3. It should be rooted after its restart!
4. Restore everything so you can get your apps back
5. Download a root check app from Google Play (it should confirm your device's root) or use SuperOneClick as a fake attempt to re-root your tablet, when it is about to start rooting your tablet a message should pop up saying that your device is already rooted
6. That's it! Have fun and buy a root beer or something
If this helped please click the "Thanks" button, i'll do the same if you just ask me, it's only one click and would mean a lot to me
if you need me for more Softwiner EVB information or information about any android devices (and blackberry devices but i don't know what will bring you here but just in case): follow me on Twitter and DM me @LordwinOfficial
Rooting nuclear softwinerevb
Not working for me. There is no superuser soft or icon after factory reset.
My Tablet is
Manufacturer: unknown
Model: SoftwinerEvb
Android Version: 4.1.1
Build ID: nuclear_evb-eng 4.1.1 JRO03C 20130504 test-keys
Board ID: nuclear
Chipset Platform: exDroid
I tried to root it using SRS Root software. It says that my tablet is root and have superuser icon.
But that superuser irself didn't have a root access.
Is there any ideas how to completely root it.
Thank you
mrlee2k said:
Not working for me. There is no superuser soft or icon after factory reset.
My Tablet is
Manufacturer: unknown
Model: SoftwinerEvb
Android Version: 4.1.1
Build ID: nuclear_evb-eng 4.1.1 JRO03C 20130504 test-keys
Board ID: nuclear
Chipset Platform: exDroid
I tried to root it using SRS Root software. It says that my tablet is root and have superuser icon.
But that superuser irself didn't have a root access.
Is there any ideas how to completely root it.
Thank you
Click to expand...
Click to collapse
Same here
Problem Solve
My problem solved.
I found out that SRSRoot software really did root my tablet. the problem is the Superuser.
So when I update superuser (apk and binary) from 3.0.3.2 to 3.1.1 manually using adb push, the Superuser
thing works fine.
I'm a ahppy man now....
Good luck tou you all
Cheers
[ROOT][GUIDE] How to root non-prerooted SoftwinerEvb Tablet
This is a Root Tool for Android 4.0/4.1 devices.
How to use it:
1. Download and install ADB Driver.
2.Restart your computer once adb driver is successfully installed.
3.Have your device charged to at least 50% to ensure no power interruptions.
4.Backup your device to your computer or external sdcard (I like My Backup app from the Play Store).
5.Download and extract Bin4ary Root Tool to a new folder on your computer.
6.Power on your device and enable USB debugging (Settings>Developer Options>USB debugging>OK).
7.Connect your device to your computer via MicroUSB to USB cable in MTP mode (option will appear in notification bar when you plug your device into your computer).
9.Your computer should automatically install drivers using the previously downloaded and installed adb driver. It may popup a install wizard; follow the wizards prompts. Let Windows update search for it. The computer may say it can't install MTP device; that's ok, click finish or cancel. Then another wizard will popup to install ADB device and will sucessfully install.
10.Double-click "RunMe.bat" (it may just say "RunMe") in the downloaded Root Tool you extracted to a new folder and follow all instructions you see on the application (for SoftwinerEvb tablet choose option 1 by pressing 1 key and then enter/return key on your keyboard).
I've succesfully rooted my SoftwinerEvb (4.1.1 JB) Tablet with it. I haven't flashed any custom recovery, rom, or kernel yet.
HAVE FUN!!
I'll try and answer any questions if I can.
ADB Driver universal
Do I need to worry about "unknown publisher"? Thank you.
How to use it:
1. Download and install ADB Driver.
2.Restart your computer once adb driver is successfully installed.
3.Have your device charged to at least 50% to ensure no power interruptions.
4.Backup your device to your computer or external sdcard (I like My Backup app from the Play Store).
5.Download and extract Bin4ary Root Tool to a new folder on your computer.
6.Power on your device and enable USB debugging (Settings>Developer Options>USB debugging>OK).
7.Connect your device to your computer via MicroUSB to USB cable in MTP mode (option will appear in notification bar when you plug your device into your computer).
9.Your computer should automatically install drivers using the previously downloaded and installed adb driver. It may popup a install wizard; follow the wizards prompts. Let Windows update search for it. The computer may say it can't install MTP device; that's ok, click finish or cancel. Then another wizard will popup to install ADB device and will sucessfully install.
10.Double-click "RunMe.bat" (it may just say "RunMe") in the downloaded Root Tool you extracted to a new folder and follow all instructions you see on the application (for SoftwinerEvb tablet choose option 1 by pressing 1 key and then enter/return key on your keyboard).
I've succesfully rooted my SoftwinerEvb (4.1.1 JB) Tablet with it. I haven't flashed any custom recovery, rom, or kernel yet.
HAVE FUN!!
I'll try and answer any questions if I can.[/QUOTE]
No you don't.
Sent from my SAMSUNG-SGH-I317 using xda premium
Custom Recovery
Is there a custom recovery for the softwinerevb yet? I have one that came with 4.1 this tablet needs a downgrade bad. Very slow. Not happy wit it at all so far. I have root using Bin4ry method. It worked very well. The bad thing is that the creator has posted the file on a site that never lets you download it. You can find it other places tho.
Kingroot worked as well
Sent from my Nexus 5X using XDA-Developers mobile app
This is a Root Tool for Android 4.0/4.1 devices.
How to use it:
1. Download and install ADB Driver.
2.Restart your computer once adb driver is successfully installed.
3.Have your device charged to at least 50% to ensure no power interruptions.
4.Backup your device to your computer or external sdcard (I like My Backup app from the Play Store).
5.Download and extract Bin4ary Root Tool to a new folder on your computer.
6.Power on your device and enable USB debugging (Settings>Developer Options>USB debugging>OK).
7.Connect your device to your computer via MicroUSB to USB cable in MTP mode (option will appear in notification bar when you plug your device into your computer).
9.Your computer should automatically install drivers using the previously downloaded and installed adb driver. It may popup a install wizard; follow the wizards prompts. Let Windows update search for it. The computer may say it can't install MTP device; that's ok, click finish or cancel. Then another wizard will popup to install ADB device and will sucessfully install.
10.Double-click "RunMe.bat" (it may just say "RunMe") in the downloaded Root Tool you extracted to a new folder and follow all instructions you see on the application (for SoftwinerEvb tablet choose option 1 by pressing 1 key and then enter/return key on your keyboard).
I've succesfully rooted my SoftwinerEvb (4.1.1 JB) Tablet with it. I haven't flashed any custom recovery, rom, or kernel yet.
HAVE FUN!!
I'll try and answer any questions if I can.
Does this work for yely kernel on softwinerevb 4.0.4
south956 said:
Does this work for yely kernel on softwinerevb 4.0.4
Click to expand...
Click to collapse
Can you please tell me how to reset an android tablet stuck through sdk? The key combination does not work.
Phone.apk
Hello to all! I have some problem with softwinerevb 13. Can't use 3g modem after deleting Phone.apk . So needed Phone.apk version 4.0.3. Please someone upload there that apk .ps.sorry for bad english ok
Thank you!
It works for me! :laugh:
Thanks it worked,
Had some trouble with drivers,
Had to use samsung usb driver to get the device recoginsed
worked after that :good::good::good:
Hello All,
I have a car mirror that has a 5inch screen running SoftwinerCvr Android 4.0.4.
The above instructions helped to root this device, I choose option #5
Thanks
Been looking and still looking, how can I flash a custom recovery?
Which one should be used?
T.I.A.
Play store
How to install the Google Play Store on it please ? It doesn't work with a simple apk :/
[HELP] Bootloop after flashing: recovery-clockwork-6.0.3.1-p4.zip -> NOOB!!!!
I`ve just tried everything related to this issue on this forum!!
Before the bootloop i had access to the adb and fastboot features by usb debbugging (sdk manager) and stock recovery, etc...
With the Bootloop, now i can´t access to the stock recovery with the 1001 combinations of the buttons, removing the battery, pressing the volume button and then connect to the pc via usb, adb reboot, and so on and so on.... nothing works!!
The pc only recognizes via usb the Tab (1 second) asking for MT65xxPreloader, like a bootlooping asking for this controller. I´ve installed this controller and the bootloop remains - 1 second each boot...
Anyone can help me to solve this dead brick? Is is not possible make a startup disk via sd card like exists for windows, for example??
Without PC connection i don't see the solution.....
Thanks in advance!!
You will need to use mtk software to enter meta mode.
Sent from my A1-810 using XDA Premium HD app
KieranFoot said:
You will need to use mtk software to enter meta mode.
Sent from my A1-810 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks for your answer!
My device can´t still enable to enter in meta mode. I tried MT6573, MT6577, MT6589 VCom driver, the SP Flash tool doesn´t locate the DA path for the function download scatter loading file.....
I followed this tutorial: http://forum.xda-developers.com/showthread.php?t=2206421&nocache=1, for windows Vista. It seems the controller is installed, but the SP flash tool or MTK tool doesn´t recognize my iconia A1-810.... I loaded the *.txt file: MT6577_Android_scatter_emmc.txt and marked all options ans appears a error: FLASHTOOL ERROR: S_FTHND_FILE-IS-NOT-LOADED-YET (5007)
I disconected the battery and when i connect usb to pc the driver apppear for 1 second with the Mediatek Preloader vcom controller and enter in loop again... appear and disappear on the PC Device Manager.....
I´m completely lost.. can you suggest something?
Thanks
flashtool error image attached
check it maybe will help, good luck !
I bought my Acer A1-810 it’s 2,5 months (from amazon). And few days ago I decided to root it. 1 hour later i realized that was not a really good idea, because i did not know much things about, and it was not as easy as I thought. and voila as a result : bootloop !
I tried different roms, different update.zips but got allways the same error : ” check.partition.size=[__PROP_UNDEFINED__] ”
I was desperate…I was at the point of resend it to Acer for repair. But last try was successful, I did it, I did !!! And there is how !
1. go to acer web page --->support--->drivers and manuels
2. choose your model acer a1-810
3. As my divece was bought in usa, my FW upgrade is AV052.RV26RC06.PA.CUS1 (in O.S ), download it !
4.when it’s done, you should unzip and should get update.zip separately.
5. Put update.zip on SD card
6.Put SD card in your device.
For next steps see the manuel of update
Hi,
I installed Lenovo P780 VibeUI 2.0 version: VIBEUI_V2.0_1512_DEV_P780 and gapps-kk-20150404-minimal-edition-signed.zip.
Then I installed Google Calendar from Play Store. Unfortunately it doesn't sync. If I go to settings/accounts/google there is no "google calendar data" option to choose.
marekjarosz said:
Hi,
I installed Lenovo P780 VibeUI 2.0 version: VIBEUI_V2.0_1512_DEV_P780 and gapps-kk-20150404-minimal-edition-signed.zip.
Then I installed Google Calendar from Play Store. Unfortunately it doesn't sync. If I go to settings/accounts/google there is no "google calendar data" option to choose.
Click to expand...
Click to collapse
Try to install full gapps pack.
Sent from my Lenovo P780
stympy said:
Try to install full gapps pack.
Click to expand...
Click to collapse
Any recommended source?
marekjarosz said:
Any recommended source?
Click to expand...
Click to collapse
Try the pack from cyanogen.
Sent from my SMT TAB 704DC
stympy said:
Try the pack from cyanogen.
Click to expand...
Click to collapse
Unfortunately I used [GApps][4.4.2][AROMA]_Aroma_Installer_GApps-v1.5.2 and didn't wipe data before/after. After rebooting the phone got "Lenovo launcher stopped, must be closed". After swithching the phone off and on end up with an infinite bootloop.
I rebooted the phone into recovery mode and wiped data, cache and dalvik and tried to reinstall VIBEUI_V2.0_1512_DEV_P780. After the first launch there is only a chinese text (I guess it might be some error, after clicking the button the same error apears again and again).
I tried to flash a custom revovery (as I end up with a Lenovo-Recovery with nothing to do) with a Flash Tool V5.13.52.200 as described in other thread but after clicking "download" and connecting the phone nothing happens (phone shows red light and a battery charge screen). The phone is recognized by the PC (Win 7) as even after turning the phone on again it is possible to upload files to the SD card using windows explorer.
marekjarosz said:
Unfortunately I used [GApps][4.4.2][AROMA]_Aroma_Installer_GApps-v1.5.2 and didn't wipe data before/after. After rebooting the phone got "Lenovo launcher stopped, must be closed". After swithching the phone off and on end up with an infinite bootloop.
I rebooted the phone into recovery mode and wiped data, cache and dalvik and tried to reinstall VIBEUI_V2.0_1512_DEV_P780. After the first launch there is only a chinese text (I guess it might be some error, after clicking the button the same error apears again and again).
I tried to flash a custom revovery (as I end up with a Lenovo-Recovery with nothing to do) with a Flash Tool V5.13.52.200 as described in other thread but after clicking "download" and connecting the phone nothing happens (phone shows red light and a battery charge screen). The phone is recognized by the PC (Win 7) as even after turning the phone on again it is possible to upload files to the SD card using windows explorer.
Click to expand...
Click to collapse
Hi. Try to reflash using SP Flash Tool v5 from my post Rooting Tutorial for KK.
I use ONLY those tools. Tested and modified for P780.
Sent from my Lenovo P780
stympy said:
Hi. Try to reflash using SP Flash Tool v5 from my post Rooting Tutorial for KK.
I use ONLY those tools. Tested and modified for P780.
Click to expand...
Click to collapse
I used exactly those tools, but with a results described below:
I tried to flash a custom revovery (as I end up with a Lenovo-Recovery with nothing to do) with a Flash Tool V5.13.52.200 as described in other thread but after clicking "download" and connecting the phone nothing happens (phone shows red light and a battery charge screen).
Click to expand...
Click to collapse
marekjarosz said:
I used exactly those tools, but with a results described below:
Click to expand...
Click to collapse
seems to me that your phone is no longer detected by your computer !
se this:
1. go to device manager
2. with device manager window open plug your phone
3. in device manager in Ports tab something like MTK 65XX... will appear for 1 or 2 secconds
Tell me if this is going on !
stympy said:
seems to me that your phone is no longer detected by your computer !
se this:
1. go to device manager
2. with device manager window open plug your phone
3. in device manager in Ports tab something like MTK 65XX... will appear for 1 or 2 secconds
Tell me if this is going on !
Click to expand...
Click to collapse
My device is detected by my computer as I am able to copy files to SD card using windows explorer. I plug the phone and I see "Lenovo P780" in My Computer, then I open it and get access to internal memory and SD card.
BUT - I do not see it in the Device Manager at all... Maybe I will try to do it on the other Windows computer?
marekjarosz said:
My device is detected by my computer as I am able to copy files to SD card using windows explorer. I plug the phone and I see "Lenovo P780" in My Computer, then I open it and get access to internal memory and SD card.
BUT - I do not see it in the Device Manager at all... Maybe I will try to do it on the other Windows computer?
Click to expand...
Click to collapse
Try what i told you with the phone powered off!
The computer must have windows XP or windows 7!
Good Luck.
stympy said:
seems to me that your phone is no longer detected by your computer !
se this:
1. go to device manager
2. with device manager window open plug your phone
3. in device manager in Ports tab something like MTK 65XX... will appear for 1 or 2 secconds
Tell me if this is going on !
Click to expand...
Click to collapse
After connecting switched-off phone to the USB port MT65xx Preloader appears in the Device Manger for 1-2 seconds.
marekjarosz said:
After connecting switched-off phone to the USB port MT65xx Preloader appears in the Device Manger for 1-2 seconds.
Click to expand...
Click to collapse
Hi. You are lucky. Your phone is detected by your computer !
All you have to do is to flash a custom recovery TWRP CN Version.
After this you could download your firmware again and put it on sd card ! reboot to recovery wipe and reflash your firmware !
stympy said:
Hi. You are lucky. Your phone is detected by your computer !
All you have to do is to flash a custom recovery TWRP CN Version.
After this you could download your firmware again and put it on sd card ! reboot to recovery wipe and reflash your firmware !
Click to expand...
Click to collapse
Thanks for your reply, but as I wrote before I don't really know how to achieve it as it is not possible to do it using Flash Tool
marekjarosz said:
Thanks for your reply, but as I wrote before I don't really know how to achieve it as it is not possible to do it using Flash Tool
Click to expand...
Click to collapse
If you want i can help you. All you need is a connection by team viewer.
Sent from my Lenovo P780
I used [TUT] Instructions MTK6577 USB VCOM Driver Installation to install a proper driver and was able to flash a custom ROM to make it work as suppose to and was able to do the rest without any problems.
Thank you