Related
Hi,
I read up on the Omega v5.2 ROM and it looks very good. I just want to know from those who are already using it, how much better performance is it using the recommended version whcih I think is called the "Default" vs the stock firmware? It is that much smoother and better battery performance?
NocNoc9595 said:
Hi,
I read up on the Omega v5.2 ROM and it looks very good. I just want to know from those who are already using it, how much better performance is it using the recommended version whcih I think is called the "Default" vs the stock firmware? It is that much smoother and better battery performance?
Click to expand...
Click to collapse
No its far to early to be better by anything but a very small margin .
Battery performance is down to the user not the firmware .
jje
JJEgan said:
No its far to early to be better by anything but a very small margin .
Battery performance is down to the user not the firmware .
jje
Click to expand...
Click to collapse
Would you happen to know what apps are removed in the "Bloated Apps Removed version" of the ROM? I can't find the list of apps the developer removed.
NocNoc9595 said:
Would you happen to know what apps are removed in the "Bloated Apps Removed version" of the ROM? I can't find the list of apps the developer removed.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=26636429&postcount=166
Tried Omega 4.2 and 5.2 briefly. Both times it broke Navigon and the camera hung on me. Don't see any benefit of the Hyperx mod. 5.2 caused my phone to warm up noticably.
So you wouldn't recommend 5.2? Also, if I do decide to flash it, do I need to do a full wipe in CWM before I flash it or can I just flash it from stock in CWM?
NocNoc9595 said:
So you wouldn't recommend 5.2? Also, if I do decide to flash it, do I need to do a full wipe in CWM before I flash it or can I just flash it from stock in CWM?
Click to expand...
Click to collapse
Have you done ANY research in the main thread? I don't think so, as all of this is covered there, including instructions (theres even a video to walk you through it). Don't be lazy.
NocNoc9595 said:
So you wouldn't recommend 5.2? Also, if I do decide to flash it, do I need to do a full wipe in CWM before I flash it or can I just flash it from stock in CWM?
Click to expand...
Click to collapse
A full wipe is the recommend, because then you have a clean installation and you beware of strange failures.
An instruction how you should flash Omega ROM is in the development thread (4th post) --> Installation Guide
I don't know if your phone is rootet yet, if so skip the first step and start with booting in CWM recovery.
Had used Omega on my SGS II, now using Omega on SGS III since 3.0. Works great for me, no errors whatsoever.
Omega 5.2 is flawless ok but hyper x mod is useless. It creates noise in video recording. No need to use 30mbps bit rate but if in future 60fps recording come true it will be a charm!!
n70shan said:
Omega 5.2 is flawless ok but hyper x mod is useless. It creates noise in video recording. No need to use 30mbps bit rate but if in future 60fps recording come true it will be a charm!!
Click to expand...
Click to collapse
Do you know how to install the stock camera apk?
I downloaded the zip file from Omega files, extracted it,but I cannot install it.
saldawop said:
Do you know how to install the stock camera apk?
I downloaded the zip file from Omega files, extracted it,but I cannot install it.
Click to expand...
Click to collapse
You have to install it with CWM:
1. Reboot to Recovery (CWM-Menu)
2. Select the zip-File
3. Enjoy
Looking at the tutorial video where it shows Omega 3 being installed on a stock rom where it says "no wipe necessary"
Does the same apply to version 6 ? as my rom is stock & rooted, will all my apps/widgets be lost or recoverable with Titanium, this will be my first custom rom and its looking great, thanks for your patience
Shug69 said:
Tried Omega 4.2 and 5.2 briefly. Both times it broke Navigon and the camera hung on me. Don't see any benefit of the Hyperx mod. 5.2 caused my phone to warm up noticably.
Click to expand...
Click to collapse
i am running omega 5.2 and i assure you i dont have the problems you mentioned... did you do a full wipe install or you just flashed it without factory reset?
irishbogman said:
Looking at the tutorial video where it shows Omega 3 being installed on a stock rom where it says "no wipe necessary"
Does the same apply to version 6 ? as my rom is stock & rooted, will all my apps/widgets be lost or recoverable with Titanium, this will be my first custom rom and its looking great, thanks for your patience
Click to expand...
Click to collapse
As per all Omega no wipe necessary . Wipe only if you hit problems .
jje
Hi All
Just finished compiling the Original Samsung 4.1.2 test firmware for CWM flashing
No changes has been made at all except Root that has been added and everything being DEODEXED
Its being uploaded atm to my Google Drive account so it should be easier to download and I will post the link as soon as its up and shared.
Please be aware of the following:
1. This is completely stock with the stock kernel that has the brick bug in it SO DON'T FORMAT EMMC AFTER YOU INSTALL IT
2. It will remove CMW and CMW needs to be installed again with Mobile odin or Odin pc.
Installation should be as per any other CWM rom:
1. Copy to SD card
2. Wipe data/factory
3. Install from the SD
4. Clear Dalvic and reboot
If you want to move away from this rom follow the following steps just to be save:
1. Use mobile odin or Odin pc to install CMW
2. Flash any other kernel like Siyah or similar
3. Do a EMMC format - ONLY AFTER STEP 2. Please dont forget to flash a non brickbug kernel 1st
4. Install other rom as desired
Download Link:
http://forum.xda-developers.com/showthread.php?t=1998205
Thanks to LegendK for eventually finding the way
Additional Installs:
Philz Kernel removing Brick bug - Flash it through recovery mode
Philz Kernel removing Brick bug - Flash through Odin
Thanks PhilZ
Additional Notes:
After installing the Rom please install one of the "Additional Installs" kernels to remove the brick bug. Once done use Rom as usual
good job
toxicdust said:
Original Samsung 4.1.2 test firmware for CWM flashing
Click to expand...
Click to collapse
Much obliged, I'm super keen to try this new version, only drama I'm a bit n00b-ish when it comes to creating a CWM-flashable ZIP from what we can grab from SamFirmwares and I'd prefer to be able to hack the apk's and Media folder before I throw it into my i9100. Looking forward to getting hold of what you've cooked up...
ADD: Oh yeh, from what I've heard, the Philz-CWM6 kernel is supposed to be the best for this F/W, check out his thread...
Code:
http://forum.xda-developers.com/showthread.php?t=1877270
looks good!!!!
Hope you can repack it with the PhilZ kernel(no eMMC brick bug) if there is time! You would save a lot of n00bs breaking their device! Just my 2 cents!
Orr.Penn.18 said:
Hope you can repack it with the PhilZ kernel(no eMMC brick bug) if there is time! You would save a lot of n00bs breaking their device! Just my 2 cents!
Click to expand...
Click to collapse
+1000
Gesendet von meinem GT-I9100 mit Tapatalk 2
how did u make the zip?
when i pulled /system and kernel it gave me a boot loop
Well done and thank you! I'm DLing when its up!
awesome!!!!!!!!!!!!!!!!!!!!!!!!!
iamnotkurtcobain said:
+1000
Click to expand...
Click to collapse
+1001
Orr.Penn.18 said:
Hope you can repack it with the PhilZ kernel(no eMMC brick bug) if there is time! You would save a lot of n00bs breaking their device! Just my 2 cents!
Click to expand...
Click to collapse
but pls upload current version for ppl who really need it in shortest time.
Its up
Will repack with the Phillz kernel as well and replace once done
toxicdust said:
Its up
Will repack with the Phillz kernel as well and replace once done
Click to expand...
Click to collapse
“You need permission to access this item.
You are signed in as *************@gmail.com, but you don't have permission to access this item. You can request access from the owner or choose a different account. Learn more”
Same problem
Give me te permission PLEASE
al*****[email protected]
permission error .!!! plz fix it
@toxicdust Can you please also upload a 180DPI dialer and TWlauncher ?
Im sure everybody would LOVE that
Thanks a lot and great job
LOL ... sorry about that. Should be open now
Ok the Philz kernel works without problems that I can see atm.
Will repack with that as well for the noob friendly version.
Others can just install his kernel from recovery mode to be on the safe side
Philz kernel available from link below, and don't forget to say Thanks...
Code:
http://forum.xda-developers.com/showpost.php?p=31310650&postcount=1
djshotty said:
Philz kernel available from link below, and don't forget to say Thanks...
Code:
http://forum.xda-developers.com/showpost.php?p=31310650&postcount=1
Click to expand...
Click to collapse
Linked the correct ones to use in the OP so that ppl don't get confused with the so many he has and by accident install the wrong one.
Hi xda'ers,
I ported mods of Disaster ROM v10 which is created by Mirko ddd to Korea Galaxy S2 Official Firmware, KKJMB2 / KSJMB2
Mirko ddd's Disaster ROM (latest v10)
http://forum.xda-developers.com/showthread.php?t=1498017
This rom is for SHW-M250K/S only.
Don't flashing on GT-I9100 or another model.
If you used ICS or JB none-Samsung Offical,
you must upgrade your device to Samsung Offical JB Firmware by using Kies or Odin before flashing this.
MUST BE NEEDED:
External SD card
(As the partition is changed, you can't use 'choose zip from internal sdcard' option.)
NOW, the latest version is V3, and supports Mirko's Disaster ROM Control
V3 Change log.
MB2 Rebase
2 ROM for M250K/S
Added Multiwindow Quicksetting button (replace notification)
Removed NATE button in dialer
Added S.Suggest app
SuperSu 1.20
Build info.
Fully deodexed app & framework
Zipaligned
Rooted with supersu 1.20
Busybox added
Stock kernal
Stock radio
Mods.
Almost all of Disaster ROM v10
(DPI beta is hidden from display setting.)
Adds.
Translated strings
Enabled change id of caller in sms
Fixed media scanner issue
Multiwindow all apps
Kweather widget
GS3's wallpaper
...
Patch for 200DPI User [optional]
DPI 200 build.prop
Multi DPI Playstore by MyLifeRocks10
http://forum.xda-developers.com/showthread.php?t=1839871
AOSP Browser (stock browser doesn't work on custom dpi.)
Multi DPI Stock apps (Dialer, Calculator, Music widget)
200 DPI Stock apps (Touchwiz, Weather widget, Camera, Flashbar, Video)
Multi and 200 DPI Stock apps were modified as analyzing MyLifeRocks10's MOD.
http://forum.xda-developers.com/showthread.php?t=2003734
Instruction.
1. Put the zip into External SD card.
2. Boot into CWM Recovery. (by using temporary CWM or kernal which includes
recovery based on CWM)
3. Select 'install zip from sdcard'.
4. Select 'choose zip from sdcard'. (Don't press 'internal sdcard'! It makes your
storage broken.)
5. Flash 'SHW-M250K/S_MB2_DisasterMOD_ROM_V3.zip'.
Downloads.
SHW-M250K
Download from Dev-host
SHW-M250S
Download from Dev-host
Credits:
Mirko ddd for Disaster ROM
mythrandyr for Multiwindow
MyLifeRocks10 for Non Standard DPI Stock apps
shoman94 for Potential Media Scanner Fix
Great job!
Thanks for porting it to Korean SGS2 models
five stars, a thank and i m developing an app to control disaster rom and this one
Good work - is compatible with M250K?
Here is a link of thread that I wrote on Korea user forum, MATCL
http://matcl.com/?m=bbs&bid=imbeded&uid=145343
Mirko ddd said:
five stars, a thank and i m developing an app to control disaster rom and this one
Click to expand...
Click to collapse
Thank you so much.
I am so glad to introuce your awesome rom to people in my country.
You have developed a greatness, I really appreciate that.
Probably these people too.
Heard the news about developing of the control app, they gonna be insane!
batt said:
Good work - is compatible with M250K?
Click to expand...
Click to collapse
Not sure,
maybe works except for mms.
jarari2 said:
Great job!
Thanks for porting it to Korean SGS2 models
Click to expand...
Click to collapse
Good morning,
I could not make this without your tutorial and advices.
Thanks to you. Always.
Re: [ROM][SHW-M250S][MB1] DisasterMOD ROM
Thanks phyb ㅋ
Sent from my GT-I9100 using xda premium
Hi aslak89,
Thank you for the port.
Currently I am running Stock 4.0.3 on a i9100 which is a converted SHW-M250S.
Just to confirm, please comment on the below steps if my understanding is correct.
Now, for me to install your updated ROM,
First I should flash Jelly Bean KSJMB1 for M250S (my converted i9100 back to M250S using a Korean M250S JB PIT file [with a different partition size than the regular M250S PIT file] and by using Odin.
Then, install your SHW-M250S_MB1_DisasterMOD_ROM_V2.zip using CWM? (If I flash the stock JB KSJMB1, How will I be able to get the temporary CWM?) (Or should I check for a pre-rooted JB KSJMB1?)
Could you please post the rooted version link if you have?
I am downloading the file from https://hotfile.com/dl/194281908/deb93f2/M250SKSJMB1_ROOT.ZIP.html and hope it will be a rooted version.
Could you please be a little elaborative in your steps for such scenarios? (cases the user has converted M250S to i9100)
Also does this has any fix to remove the 80 character SMS limitation, dialer issues, and other usability issues like extremly off-compass and GPS and very low vibration issues?
I believe the vibration, compass and gps should be fixed by moving to JB KSJMB1, but I just wanted to know about the SMS issue and dialer issue. Atleast if the SMS is fixed, I can live with the dialer!!!
Thanks for all the hardwork and I am willing to move back to M250S because of the above mentioned issues! I just hate the low vibration becoz most of the time, the phone will be on vibration mode due to my nature of work!!!
Sorry for asking too many questions and dumping them in a single post, but I have nobody to ask but you about the modified rom for M250S!! Not many seem to be knowledgeable about it too!!
Re: [ROM][SHW-M250S][MB1] DisasterMOD ROM V2
foosaa said:
Hi aslak89,
Thank you for the port.
Currently I am running Stock 4.0.3 on a i9100 which is a converted SHW-M250S.
Just to confirm, please comment on the below steps if my understanding is correct.
Now, for me to install your updated ROM,
First I should flash Jelly Bean KSJMB1 for M250S (my converted i9100 back to M250S using a Korean M250S JB PIT file [with a different partition size than the regular M250S PIT file] and by using Odin.
Then, install your SHW-M250S_MB1_DisasterMOD_ROM_V2.zip using CWM? (If I flash the stock JB KSJMB1, How will I be able to get the temporary CWM?) (Or should I check for a pre-rooted JB KSJMB1?)
Could you please post the rooted version link if you have?
I am downloading the file from https://hotfile.com/dl/194281908/deb93f2/M250SKSJMB1_ROOT.ZIP.html and hope it will be a rooted version.
Could you please be a little elaborative in your steps for such scenarios? (cases the user has converted M250S to i9100)
Also does this has any fix to remove the 80 character SMS limitation, dialer issues, and other usability issues like extremly off-compass and GPS and very low vibration issues?
I believe the vibration, compass and gps should be fixed by moving to JB KSJMB1, but I just wanted to know about the SMS issue and dialer issue. Atleast if the SMS is fixed, I can live with the dialer!!!
Thanks for all the hardwork and I am willing to move back to M250S because of the above mentioned issues! I just hate the low vibration becoz most of the time, the phone will be on vibration mode due to my nature of work!!!
Sorry for asking too many questions and dumping them in a single post, but I have nobody to ask but you about the modified rom for M250S!! Not many seem to be knowledgeable about it too!!
Click to expand...
Click to collapse
Yes. That's correct. Just flash the firmware with pit file through Odin, and flash this rom through CWM. But, it isn't necessary to use rooted firmware because it simply overwrites the whole system partition.(and this rom is rooted)
You can download temporary CWM from clockworkmod.com, and you may flash it through stock recovery to use it(external sdcard needed!)
I was using XXLSJ(GT-I9100 JB leaked) before flashing this rom, and there wasn't any problem except that the internal sdcard was wiped out.
For some bugs(?) you mentioned, I never had any of these problems, so I can't answer for them. Sorry
Sent from my Nexus 7 using XDA Premium HD app
Thank you so much!!
I have updated the JB ROM and I have installed the SHW-M250S_MB1_DisasterMOD_ROM_V2.zip with a temporary CWM!
But still the SMS limit is only 80 characters, but all other issues seem to be fixed. GPS and Compass are working as expected.
Could you please tell me if I have to install the UPDATE_DisasterMOD_V2.zip too after installing the above ROM update?
Also, is there any system level fix for the 80 character sms limitation with Disaster ROM update? I know I can install another application to handle SMS, but some banking apps do not work in India due to the 80 Character limitation!
Thanks for everything!!
jarari2 said:
Yes. That's correct. Just flash the firmware with pit file through Odin, and flash this rom through CWM. But, it isn't necessary to use rooted firmware because it simply overwrites the whole system partition.(and this rom is rooted)
You can download temporary CWM from clockworkmod.com, and you may flash it through stock recovery to use it(external sdcard needed!)
I was using XXLSJ(GT-I9100 JB leaked) before flashing this rom, and there wasn't any problem except that the internal sdcard was wiped out.
For some bugs(?) you mentioned, I never had any of these problems, so I can't answer for them. Sorry
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
foosaa said:
Thank you so much!!
I have updated the JB ROM and I have installed the SHW-M250S_MB1_DisasterMOD_ROM_V2.zip with a temporary CWM!
But still the SMS limit is only 80 characters, but all other issues seem to be fixed. GPS and Compass are working as expected.
Could you please tell me if I have to install the UPDATE_DisasterMOD_V2.zip too after installing the above ROM update?
Also, is there any system level fix for the 80 character sms limitation with Disaster ROM update? I know I can install another application to handle SMS, but some banking apps do not work in India due to the 80 Character limitation!
Thanks for everything!!
Click to expand...
Click to collapse
can you please give me the pit file of jb shw-m250s
Mastermind_hassan said:
can you please give me the pit file of jb shw-m250s
Click to expand...
Click to collapse
The pit file is there in the JB link available here
I have added it to this message as too!!
Download and let me know if it is fine!
Please this is only for M250SKSJMB1 (for M250S from SKT). I hope you have the correct version or you can download it from the above hotfile link here! or from the above link!
Re: [ROM][SHW-M250S][MB1] DisasterMOD ROM V2
Well guys it's been updated to v3 based on MB2. Check this out on Matcl
Sent from my SHW-M250K using xda premium
CallUp said:
Well guys it's been updated to v3 based on MB2. Check this out on Matcl
Sent from my SHW-M250K using xda premium
Click to expand...
Click to collapse
Can it be flashed on MB1? I have MB1 and do not have the links for a rooted MB2!! Please let me know if it can be flashed on MB1 or if you
have the links for a rooted MB2 version for M250S!!!
Many Thanks!!
Re: [ROM][SHW-M250S][MB1] DisasterMOD ROM V2
foosaa said:
Can it be flashed on MB1? I have MB1 and do not have the links for a rooted MB2!! Please let me know if it can be flashed on MB1 or if you
have the links for a rooted MB2 version for M250S!!!
Many Thanks!!
Click to expand...
Click to collapse
It can be flashed directly from MB1 using either CWM or Tegrak Recovery. In case of me, I used Tegrak Recovery for flashing the updated one. It seems like u haven't noticed that you can both root ur device and flash the rom using a kernel from Tegrak which is recently updated to MB2 based.
Sent from my SHW-M250K using xda premium
Thank you guys..
now the latest version is V3
and post updated.
I didnt care about my post, should do.
I will keep it up
Sent from my SHW-M250S using XDA Premium HD app
aslak89 said:
This rom is for SHW-M250K/S only.
Don't flashing on GT-I9100 or another model.
Click to expand...
Click to collapse
why plz ??
Shw-250s No Lock Screen Or Power Menu???
Shw-250s No Lock Screen Or Power Menu I try Root browse imei "keystr" rwxrwxrwx Still Not Work..... Help AnyOne...
This is a Deodexed Version Of the newest JellyBean 4.1.2 N5110UEDMD1
Kinda Bored and Noticed you guys have nothing to flash so figured id help out a bit
I currently dont have the tablet but plan on getting one soon, please let me know how it goes it should be perfect
Features:
Rooted
insecure boot.img
BusyBox
Zipaligned
Deodexed
Init.d support
adb as root
Bash
Nano
Download: http://www.androidfilehost.com/?fid=22926241640220009
md5: b5a83f9c4aecc2fee0f2bdf4784a7223
Disclaimer: nothing has been edited this is a full stock rom that you would expect to get from samsung just rooted and deodexed for easy modability,themability
Thanks to:
SamMobile - for the basefirmware package
Dsixda - for the kitchen used to deodex
ChainFire - for superSU
Reserved
Flashed the Deodexed Rom and it is very smooth. Thanks. Count this to the fund: 21043458XK800762A
rfb813 said:
Flashed the Deodexed Rom and it is very smooth. Thanks. Count this to the fund: 21043458XK800762A
Click to expand...
Click to collapse
great news i was hoping it would be good the only thing i was worried about was the update binary file but sense we have the same partitions as the note 10.1 i used a known working one and apparently all is good GREAT NEWS!! and ps thanks a bunch
This is what I am talking about flashing now
Edit: Works perfect thanks cant wait for you to get this device Mr Beanstown106
Can international version (N5100) flash this? Will I lost the 3g ability or it does not matter?
Thanks
rfb813 said:
Flashed the Deodexed Rom and it is very smooth. Thanks. Count this to the fund: 21043458XK800762A
Click to expand...
Click to collapse
Can you share your exact setup and what you did to be successful? Twrp? Cwm? Thank you!!
Sent from my GT-N5110 using Tapatalk HD
shaoran_ojo said:
Can international version (N5100) flash this? Will I lost the 3g ability or it does not matter?
Thanks
Click to expand...
Click to collapse
WILL LOOSE 3g i will make a n 5100 version roday
itd be easier if u dump partitioni ask itin general
Sorry for asking here, can someone upload:
framework/framework-res.apk
usr (folder)
vendor (folder)
build.prop
bin/sdcard; rild
etc/vold.fstab
desantim said:
Can you share your exact setup and what you did to be successful? Twrp? Cwm? Thank you!!
Sent from my GT-N5110 using Tapatalk HD
Click to expand...
Click to collapse
I Flashed CWM 5110 Ex#4 with Odin on my Note with auto reboot off. Rebooted into Recovery to check that I had CWM, I did and then rebooted. CWM asked if I wanted to make this my permanent recovery. I said yes. Note then rebooted. I installed Goo Manager so I could easily reboot into Recovery. Did a nandroid backup of my Note's Rom for safety, downloaded the zip file and saved it to my external sdcard (you could use your internal memory) and flashed it. Worked perfectly. I did have to reformat my 64gb sdcard to Fat32 for CWM to recognize it.
desantim said:
Can you share your exact setup and what you did to be successful? Twrp? Cwm? Thank you!!
Sent from my GT-N5110 using Tapatalk HD
Click to expand...
Click to collapse
Flashed with emwno CWM #4 port http://forum.xda-developers.com/showthread.php?t=2244252
Made a backup first wipe and flash there is no progress bar at least it doesn't work properly n CWM so you just have to wait.
emwno said:
Sorry for asking here, can someone upload:
framework/framework-res.apk
usr (folder)
vendor (folder)
build.prop
bin/sdcard; rild
etc/vold.fstab
Click to expand...
Click to collapse
Emwro, here are the files from the Deodexed Rom you asked for:
https://www.dropbox.com/sh/bnxyel2l6t9lm56/X-0cOX2ZFA
beanstown106 said:
WILL LOOSE 3g i will make a n 5100 version roday
itd be easier if u dump partitioni ask itin general
Click to expand...
Click to collapse
Done, hope that help and thanks for your work
shaoran_ojo said:
Done, hope that help and thanks for your work
Click to expand...
Click to collapse
thanks will do the 5100 version when i get home from dinner
Do I need to wipe everything or just cache ?
Nanaki666 said:
Do I need to wipe everything or just cache ?
Click to expand...
Click to collapse
I just wiped cache and dalvik cache and installed.
worked fine
beanstown106 said:
thanks will do the 5100 version when i get home from dinner
Click to expand...
Click to collapse
Yeah N5100 version is much more interesting, because 8 " is portable with 330 g
rfb813 said:
I just wiped cache and dalvik cache and installed.
worked fine
Click to expand...
Click to collapse
did the same just now, working well!
Just as an aside, if you do flash this, some of the prepackaged samsung apps will detect root and will exit upon trying to run them. I dont use those apps anyway, but if you do its just a forewarning
beanstown106 said:
great news i was hoping it would be good the only thing i was worried about was the update binary file but sense we have the same partitions as the note 10.1 i used a known working one and apparently all is good GREAT NEWS!! and ps thanks a bunch
Click to expand...
Click to collapse
One of the best Roms for the S3 was developed by enewman. He started out with the base Rom like you provided and then did a cookbook approach where he provided zippable Mods for things like 4 way reboot, battery icons, etc. This allow you to flash and modify the rom to your choosing. He later developed his own Rom, the Devils Reject. But the initial effort was successful in giving us the ability to modify our Rom. Any chance we can get something like this started until you have the opportunity to develop you own Rom?
Anyone noticed samsung is going backwards with this firmware with regards to auto brightness slider?
JKAY DELUXE [I9300 JB 4.1.2]
This is a completely 100% stock rom built from the P5200XXUAMK8 base. It's in flashable zip format, but there is absolutely no tweaking done to this rom; its primary purpose is as a base for anyone wanting to build a mod rom for the P5200 3G, as well as being there for anyone who wants to return stock without odin.
As it is 100% stock it's fully bloated, odexed, and non-rooted. You can attain root by flashing root.zip (not included in this post, but it's in the main forum) thus, if you have any complaints, bring them to Samsung, not me. Flashing instructions and download link below.
Edit: I've now also posted a deodexed + rooted build. See download link below. No other changes have been made to this version besides deodex/root.
Flashing instructions:
-Full wipe (factory reset in twrp)
-flash ROM
-reboot, let sit for about 10 minutes
-You're now 100% stock. Enjoy!
Download link:
100% stock
Rooted/Deodexed
Thanks a bunch, this will save me somewhere down the road !
Thanks a bunch, this will save me somewhere down the road ! :good:
I just opened my Tab 3, 10.1 Build JDQ39.P520UEUAMK1.
So the P5200XXUAMK8 is newer?
serendipityguy said:
Thanks a bunch, this will save me somewhere down the road ! :good:
I just opened my Tab 3, 10.1 Build JDQ39.P520UEUAMK1.
So the P5200XXUAMK8 is newer?
Click to expand...
Click to collapse
I think it's just a region difference, will work just fine on your tab though, there's no difference in the internals
Just changed hosts to mediafire due to reports of problems with mega
just added a deodexed / rooted build. No other changes have been made to the second build
I have fc on galery and camera what can i do to fix them ?
Sent from my GT-P5200 using XDA Premium HD app
Lump800 said:
I have fc on galery and camera what can i do to fix them ?
Sent from my GT-P5200 using XDA Premium HD app
Click to expand...
Click to collapse
Flash stock Rom via Odin only this fix this Problem ... Have the same Problem
Sent from GT-I9305 CM11 20140131-NIGHTLY + Agni PureCM v2.6c
And after that I can flash directly the file from above?! To get rot and deodexed?
Sent from my GT-I9305 using XDA Premium 4 mobile app
Yes ... Don't forget to flash twrp ... Odin flash the stock recovery with the Firmware
Sent from GT-I9305 CM11 20140131-NIGHTLY + Agni PureCM v2.6c
Would you please make a mirror maybe at mega? I think mediafire sucks really hard. Just visit it without adblick and you know why
Max4000 said:
Would you please make a mirror maybe at mega? I think mediafire sucks really hard. Just visit it without adblick and you know why
Click to expand...
Click to collapse
hmm, strange. I have a mediafire pro account, the downloads should be direct links. Gonna contact mediafire about it
Restl3ss said:
hmm, strange. I have a mediafire pro account, the downloads should be direct links. Gonna contact mediafire about it
Click to expand...
Click to collapse
hi guys
just a question
deodexed version is flashable by recovery or by odin?
thanks in advance
I have boot loop on p5200 but i don't know what was wrong I downloaded a stock rom i flashed it with odin and it was all good but the tab keeps rebooting on samsung logo
tried to flash twr and do all the wipes but still rebooting i can access normally download and recovery mode
if i flashed ur rom will it fix this?
saba7o0o said:
I have boot loop on p5200 but i don't know what was wrong I downloaded a stock rom i flashed it with odin and it was all good but the tab keeps rebooting on samsung logo
tried to flash twr and do all the wipes but still rebooting i can access normally download and recovery mode
if i flashed ur rom will it fix this?
Click to expand...
Click to collapse
check the recovery that you are using...
where is the md5 file i downloaded the stock.zip and cant find it
Newby question
Hello, is this the correct download for unrooting my tab 3?
I have a cwg mod installed and cannot get my firmware updated by samsung software
it wont update from the tab also.
greetings wolfgang
It seems i cant download the file from the link here rapid gator net/ file /72cb51702f19de71ac6ce8dbdcfcc611
semms like it is to big to be downloaded in the free time slot...
bootloop after flashing , boots reaches galaxy tab logo then reboots again
Same here! bootloop after flashing.
TWRP 2.8.7.1