Hi All
Just finished compiling the Original Samsung 4.1.2 test firmware for CWM flashing
No changes has been made at all except Root that has been added and everything being DEODEXED
Its being uploaded atm to my Google Drive account so it should be easier to download and I will post the link as soon as its up and shared.
Please be aware of the following:
1. This is completely stock with the stock kernel that has the brick bug in it SO DON'T FORMAT EMMC AFTER YOU INSTALL IT
2. It will remove CMW and CMW needs to be installed again with Mobile odin or Odin pc.
Installation should be as per any other CWM rom:
1. Copy to SD card
2. Wipe data/factory
3. Install from the SD
4. Clear Dalvic and reboot
If you want to move away from this rom follow the following steps just to be save:
1. Use mobile odin or Odin pc to install CMW
2. Flash any other kernel like Siyah or similar
3. Do a EMMC format - ONLY AFTER STEP 2. Please dont forget to flash a non brickbug kernel 1st
4. Install other rom as desired
Download Link:
http://forum.xda-developers.com/showthread.php?t=1998205
Thanks to LegendK for eventually finding the way
Additional Installs:
Philz Kernel removing Brick bug - Flash it through recovery mode
Philz Kernel removing Brick bug - Flash through Odin
Thanks PhilZ
Additional Notes:
After installing the Rom please install one of the "Additional Installs" kernels to remove the brick bug. Once done use Rom as usual
good job
toxicdust said:
Original Samsung 4.1.2 test firmware for CWM flashing
Click to expand...
Click to collapse
Much obliged, I'm super keen to try this new version, only drama I'm a bit n00b-ish when it comes to creating a CWM-flashable ZIP from what we can grab from SamFirmwares and I'd prefer to be able to hack the apk's and Media folder before I throw it into my i9100. Looking forward to getting hold of what you've cooked up...
ADD: Oh yeh, from what I've heard, the Philz-CWM6 kernel is supposed to be the best for this F/W, check out his thread...
Code:
http://forum.xda-developers.com/showthread.php?t=1877270
looks good!!!!
Hope you can repack it with the PhilZ kernel(no eMMC brick bug) if there is time! You would save a lot of n00bs breaking their device! Just my 2 cents!
Orr.Penn.18 said:
Hope you can repack it with the PhilZ kernel(no eMMC brick bug) if there is time! You would save a lot of n00bs breaking their device! Just my 2 cents!
Click to expand...
Click to collapse
+1000
Gesendet von meinem GT-I9100 mit Tapatalk 2
how did u make the zip?
when i pulled /system and kernel it gave me a boot loop
Well done and thank you! I'm DLing when its up!
awesome!!!!!!!!!!!!!!!!!!!!!!!!!
iamnotkurtcobain said:
+1000
Click to expand...
Click to collapse
+1001
Orr.Penn.18 said:
Hope you can repack it with the PhilZ kernel(no eMMC brick bug) if there is time! You would save a lot of n00bs breaking their device! Just my 2 cents!
Click to expand...
Click to collapse
but pls upload current version for ppl who really need it in shortest time.
Its up
Will repack with the Phillz kernel as well and replace once done
toxicdust said:
Its up
Will repack with the Phillz kernel as well and replace once done
Click to expand...
Click to collapse
“You need permission to access this item.
You are signed in as *************@gmail.com, but you don't have permission to access this item. You can request access from the owner or choose a different account. Learn more”
Same problem
Give me te permission PLEASE
al*****[email protected]
permission error .!!! plz fix it
@toxicdust Can you please also upload a 180DPI dialer and TWlauncher ?
Im sure everybody would LOVE that
Thanks a lot and great job
LOL ... sorry about that. Should be open now
Ok the Philz kernel works without problems that I can see atm.
Will repack with that as well for the noob friendly version.
Others can just install his kernel from recovery mode to be on the safe side
Philz kernel available from link below, and don't forget to say Thanks...
Code:
http://forum.xda-developers.com/showpost.php?p=31310650&postcount=1
djshotty said:
Philz kernel available from link below, and don't forget to say Thanks...
Code:
http://forum.xda-developers.com/showpost.php?p=31310650&postcount=1
Click to expand...
Click to collapse
Linked the correct ones to use in the OP so that ppl don't get confused with the so many he has and by accident install the wrong one.
Related
I have done these works :
1. Removed full battery notification
2. Installed supercurio kernel
3. Removed touchwiz launcher (replaced with the stock gingerbread of the nexus s 9020)
4. Removed all Samsung stuff (unuseful) except voice commands and dlna.
Now i would share this with all the comunity, but how i can do this ?
(i can't do a nandroid backup because clockworkmod isn't avaible).
Please, help me, this phone it's terrible with all samsung customization!
Think you should have posted this in Q&A
stoney73 said:
Think you should have posted this in Q&A
Click to expand...
Click to collapse
Thanks! I do this immediatly
kawa636r said:
Thanks! I do this immediatly
Click to expand...
Click to collapse
do you have the final product file in .zip format or .tar format ???
if its in the latter format, we can flash this file using ODIN as PDA......
otherwise i think its difficult without a custom recovery..... waiting for Supercurio .....
EDIT!!!:
As this post was written on the 9th of December 2011, now it becamed outdated.
At that time, this was the easieset way for root, DMCR, CWR.
Now there are easier ways to root your device.
There are newer roms, kernels that already contains the DMCR and CWR.
I do not have time to update the OP.
So please keep this in mind while you read this topic!
25.01.2012.
--------------------------------------------------------------------------------
As there are some people, who likes to use the original factory rom, not the cooked ones, I decided to put together a brief tutorial on how to get most out of these roms (only basic steps!).
Important: All below mentioned are valid only for the devices with unlocked bootloader and running the Generic Central Europe ST18i (Ray) 4.0.2.A.0.42 (Android 2.3.4). It may work with others as well, but I haven't tested.
Disclaimer: In case that you follow this tutorial, I do not take any responsability for damaging, bricking your devices. You are doing everything at your own responsability!
With all these thingies that I collected, you'll have a rooted device, capable of dual way call recording, having the cwm recovery and freed from bloatware.
First of all make sure you have all the necessary drivers installed on your PC!
What we need:
- the Generic Central Europe ST18i (Ray) 4.0.2.A.0.42 generic factory ROM (Thanks to Jozinek and SE): Download link
- Flashtool (thanks to Androxyde): Download link
- rooting kernel (thanks to DooMLoRD): Download link
- patched factory kernel that enables the dual mode recording (thanks to skvalex): Download link
- CWM recovery install software, (SE Extreme Tweak Installer, thanks to quangnhut123): Download link
How2:
1. In case that you do not have the 4.0.2.A.0.42 rom on your device, flash it with Flashtool.
2. Boot your device, make the basic settings (language, wifi, gmail, so on...). Make sure you allow USB debugging mode in Settings/Applications/Development and to allow Unknown sources as well.
3. Switch off your device.
4. Switch it on in fastboot mode (pres and hold vol up while you connect to the usb). The BLUE led should light.
5. Flash the rooting kernel.
6. Reboot your device, check you should have superuser installed (your wifi doesn't work now, it is normal).
7. Switch off your device.
8. Switch it on in fastboot mode (pres and hold vol up while you connect to the usb). The BLUE led should light.
9. Flash the patched factory kernel that enables the dual mode recording.
10.Reboot your device, update superuser and # if needed (your wifi should be working now).
Congrats, now you have a rooted stock rom having the dual mode call recording enabled.
In order to enjoy this function, you'll need a recording software that uses this method, like: Download link
In case that you want cwm recovery as well, follow these steps:
11. Connect your switched on device, to your PC.
12. Run the SE_Extreme_Tweak_Installer and from its option window, select "CWM For Xperia Neo/ARC/ARC-S/Play/Pro/Ray", than press install. Wait till finishes.
13. In case that "Auto Reboot" was ticked, the device will reboot, otherway reboot manually your device.
Now you have CWM recovery installed as well. To use it, you should press and hold the VOL down button when you see the "SonyEriccson" logo while booting the device.
And of course now, in addition, you can get rid of the bloatware (list of junkies that can be safely removed from the device, the links are for ARC devices, but can be applied to RAY as well): Here or Here
The rooting procedure and the cwm recmode installation can be done in a lot of different ways as well. In my oppinion, this way, as explained above, is the easiest one(till now...).
UPDATE: Here is a very well optimized OC kernel with dual mode call recording (thanks to aire)
That's it. Good luck!
Hope you'll enjoy it.
If you like the tut, just hit the Thanks button!
Is doomlord's kernel necessary for the next steps? If not, isn't it much easier using the zegrush exploit?
Bazonga said:
Is doomlord's kernel necessary for the next steps? If not, isn't it much easier using the zegrush exploit?
Click to expand...
Click to collapse
Well, as I've mentioned : " The rooting procedure and the cwm recmode installation can be done in a lot of different ways..."
If you follow my tutorial you'll succeed 100%.
And of course there are other solutions that work 100% as well.
It is up to you to decide whichone will you follow
seatone said:
Well, as I've mentioned : " The rooting procedure and the cwm recmode installation can be done in a lot of different ways..."
If you follow my tutorial you'll succeed 100%.
And of course there are other solutions that work 100% as well.
It is up to you to decide whichone will you follow
Click to expand...
Click to collapse
Yeah I've read that, so it isn't necessary to use Doomlords kernel in order tu use the patched kernel and CWM?
Also, is there a way to combine the dual mode recording kernel with this one: http://forum.xda-developers.com/showthread.php?t=1322610 ?
Just want to confirm as it's better to be safe. This allows me to install custom roms after right?
TsunKit said:
Just want to confirm as it's better to be safe. This allows me to install custom roms after right?
Click to expand...
Click to collapse
Yes if your rom is flashable with ClockworkMod recovery, and of course is for our phone.
TsunKit said:
Just want to confirm as it's better to be safe. This allows me to install custom roms after right?
Click to expand...
Click to collapse
In case that the custom rom you want to use is flashable through cwr method, than the answer is yes (these roms are in .zip format).
aragog53 said:
No, it allows you to use "root asking" applications, such as Titanium Backup, Root Explorer etc...
....
Click to expand...
Click to collapse
Read more carefuly the tut before saying something... just my two cents...peace.
- patched factory kernel that enables the dual mode recording (thanks to skvalex)
Hi Seatone, Where is the source for above patched factory kernel?? Is it by you? Can you point me to the link address? Thank you.
Is there a kernel for overclocking, because mugetsu kills wifi :-(
Sent from my ST18i using XDA App
Neat! Been waiting for this. Thanks a lot bro! Just one thing - Can someone explain to me what does this mean:
10. ...update superuser and # if needed...
Click to expand...
Click to collapse
OC kernel
crownless said:
Is there a kernel for overclocking, because mugetsu kills wifi :-(
Sent from my ST18i using XDA App
Click to expand...
Click to collapse
Well, yes (thanks to aire): http://www.mediafire.com/?5sb60pipjxw9dgl
Try it and if it works for you as well, I'll insert it in the OP.
Томица said:
Neat! Been waiting for this. Thanks a lot bro! Just one thing - Can someone explain to me what does this mean:
Click to expand...
Click to collapse
You're welcome!
You'll probably be prompted to update superuser (actual version 3.0.7(41) and superuser binary (#) (actual version 3.0.3.2).
Ignore.
sent from my MIUI powered C64
seatone said:
Well, yes (thanks to aire): http://www.mediafire.com/?5sb60pipjxw9dgl
Try it and if it works for you as well, I'll insert it in the OP.
Click to expand...
Click to collapse
Is this kernel contain both overclock and call recording patch? or just overclock?
jackchua65 said:
Is this kernel contain both overclock and call recording patch? or just overclock?
Click to expand...
Click to collapse
It contains both. And it's a very well optimized kernel.
Its ok I now have recovery!!!!
Theme's for stock getting built later !!!!
Thanks
Going make some themes
sent from my gorgeus Xperia Ray
seatone said:
It contains both. And it's a very well optimized kernel.
Click to expand...
Click to collapse
Thanks for the posting.
I try to find the detail about this kernel, end up is in 4pda which all in Russia.
Is this the latest kernel from aire? I saw it got at least 5 or 6 update for the kernel.
The other thing which is more interesting is in 4pda, they have this ROM REPACK4PDA, which I can't download as well.
jackchua65 said:
Thanks for the posting.
I try to find the detail about this kernel, end up is in 4pda which all in Russia.
Is this the latest kernel from aire? I saw it got at least 5 or 6 update for the kernel.
The other thing which is more interesting is in 4pda, they have this ROM REPACK4PDA, which I can't download as well.
Click to expand...
Click to collapse
Added aire's latest kernel to the OP. Thank you aire!
About the REPACK4PDA rom: As its name says it's for 4pda...I suppose...
The rom itself is great (made by aire), it's what I use (slightly modified by me) and I'm 100% satisfied with it.
Alhough I do not speak Russian, as I've understood from their homepage, they are preparing to release the rom on xda as well. So, patiance (it will be a nice rom), or try to download it from their site.
Hey seatone,
Installed the kernel from OP. Phone works smoother now. I tried to find the downloadlink for the repack4pda rom, but failed. The place where the link is, remains blank. Guess I'd have to register at 4pda to get it. Could you tell me what the major differences compared to a rooted and bloatware removed stock SE rom with batterymod and transparent status bar (as i have now) are?
Thanks,
I leave here the JB 4.1.2 Leak in a Deodexed version. (For testing)
- Don't use Preload.
- It's a complete ROM , not only app and framework.
- Busybox
DISCLAIMER 1:
I am not responsible in ANY way if this bricks your phone/ goes into bootloop. You, and YOU ONLY, is responsible for what happened to your phone.
To avoid problems with system size, the ROM don't have some apps like chaton or music_hub . If you need to install some of them you can install those after.
I removed some ringtones too.
Because that , is important to build a good preload version.
Installation:
Copy zip to SD Card
Download and install CWM 6.0.2.8
Do a Backup (You can use it to restore data if you want to wipe data/factoryreset in this step)
Format system from CWM to have a fresh installation.
Install zip from CWM
[Optional] wipe cache/dalvik-cache
If you don't format data or wipe data/factory reset, you will have your previous phone but deodexed.
Reboot
Download
Version 2.1 : 22/02/2013 : http://d-h.st/nVS To have root after flash the ROM, flash root.zip from Shaaan
Version 2 : 19/02/2013 : http://d-h.st/OF8
Version 1 : http://d-h.st/2zE
Credits:
01. Shaaan: CWM and a lot of things
02. Frappeti Deodexed ROM in Galaxy Advance
03. Exelter : His deodexed ROM.
If you want to enable the Ripple Effect from Kirillos flash this zip:
http://d-h.st/UUr
Credits to Kirillos
cbolumar said:
I leave here the JB 4.1.2 Leak in a Deodexed version. (For testing)
- Don't use Preload.
- It's a complete ROM , not only data and framework.
- Busybox and root included.
Click to expand...
Click to collapse
-Complete ROM? can u specify that a little more than just (not only data and framework)
-Preload?
-What is the difference between this Rom and Estelter's one?
mojito0 said:
-Complete ROM? can u specify that a little more than just (not only app and framework)
-Preload?
-What is the difference between this Rom and Estelter's one?
Click to expand...
Click to collapse
This is a complete ROM : app, lib,etc,xbin,framework,.....build.prop,.. You have a new system and because that, you can use it as base to build a custom ROM.
Estelter change the app and framework directories to deodex apps and jars but you need flash the others system directories with odin before.
Preload is a specific area Sansung use like a extension of the system partition. In GB we don't use that area. I remove some apps from /system/app and the system partition size is enough . I don't need at the moment the preload partition.
Can I flash this zip from GB??
loof13 said:
Can I flash this zip from GB??
Click to expand...
Click to collapse
Not. You must use Odin the first time because :
- You need to change the partitions map to JB
- Flash the JB modem, kernel, baseband, CSC, etc.
This ROM is a complete /system . It is the part of the ROM we change in the custom ROMS.
Maybe not the smartest question, but...
Can i change vold.stab and framework-res.apk inside your pack, so that i want to have both effect right after ROM installation (vold.stab already switched, so there could be some mess if i don't change it before flashing of the rom)?
judas1977 said:
Maybe not the smartest question, but...
Can i change vold.stab and framework-res.apk inside your pack, so that i want to have both effect right after ROM installation (vold.stab already switched, so there could be some mess if i don't change it before flashing of the rom)?
Click to expand...
Click to collapse
Yes , no problem.
What about flash counter ? It will rise up after flash ?
AW: [ROM] Deodexed XXMB2 without Preload
michal_ag said:
What about flash counter ? It will rise up after flash ?
Click to expand...
Click to collapse
It raise up if you use odin.
But you can reset counter
Sent from my GT-I8160 using xda app-developers app
michal_ag said:
What about flash counter ? It will rise up after flash ?[/QUOTE
Non because you use odin with stock ROM. After you flash this ROM using CWM. Your counter remain 0.
Click to expand...
Click to collapse
when you insert the headphones the sound is played outside speaker.. please fix this bug
Odp: [ROM] Deodexed XXMB2 without Preload
I confirm audio routing issue. I just thought that my phone is broken. Good to know that's rom's bug
Wysyłane z mojego GT-I8160 za pomocą Tapatalk 2
BUG Found: Video Recording does not work. I can take pictures though.
Version 2
I left version 2 in the first post. I think it resolve both bugs.
cbolumar said:
I left version 2 in the first post. I think it resolve both bugs.
Click to expand...
Click to collapse
yep the bugs are resolved but now the rom aren't rooted, and after flash the root by shaan supersu doesn't work.. are u any ideas?
slade9220 said:
yep the bugs are resolved but now the rom aren't rooted, and after flash the root by shaan supersu doesn't work.. are u any ideas?
Click to expand...
Click to collapse
OK , yesterday i didn't have time to fix it. I hope to fix it today.
R: [ROM] Deodexed XXMB2 without Preload
cbolumar said:
OK , yesterday i didn't have time to fix it. I hope to fix it today.
Click to expand...
Click to collapse
I ceck with adb and in the system/xbin the file 'su' is missing.. i hope this can help you, thanks for your work!
Inviato dal mio GT-I8160 con Tapatalk 2
Version 2.1 uploading . To have root flash the ROM and after flash the root.zip from Shaaan.
I had a lot of problems with the root access. I don't know the reason.
cbolumar said:
Version 2.1 uploading . To have root flash the ROM and after flash the root.zip from Shaaan.
I had a lot of problems with the root access. I don't know the reason.
Click to expand...
Click to collapse
check updater-script
cbolumar said:
Version 2.1 uploading . To have root flash the ROM and after flash the root.zip from Shaaan.
I had a lot of problems with the root access. I don't know the reason.
Click to expand...
Click to collapse
Put the root files in the rom. But you need to set the correct permissions if you want it to work.
Sent from my Galaxy Ace 2 i8160
This is a Deodexed Version Of the newest JellyBean 4.1.2 N5110UEDMD1
Kinda Bored and Noticed you guys have nothing to flash so figured id help out a bit
I currently dont have the tablet but plan on getting one soon, please let me know how it goes it should be perfect
Features:
Rooted
insecure boot.img
BusyBox
Zipaligned
Deodexed
Init.d support
adb as root
Bash
Nano
Download: http://www.androidfilehost.com/?fid=22926241640220009
md5: b5a83f9c4aecc2fee0f2bdf4784a7223
Disclaimer: nothing has been edited this is a full stock rom that you would expect to get from samsung just rooted and deodexed for easy modability,themability
Thanks to:
SamMobile - for the basefirmware package
Dsixda - for the kitchen used to deodex
ChainFire - for superSU
Reserved
Flashed the Deodexed Rom and it is very smooth. Thanks. Count this to the fund: 21043458XK800762A
rfb813 said:
Flashed the Deodexed Rom and it is very smooth. Thanks. Count this to the fund: 21043458XK800762A
Click to expand...
Click to collapse
great news i was hoping it would be good the only thing i was worried about was the update binary file but sense we have the same partitions as the note 10.1 i used a known working one and apparently all is good GREAT NEWS!! and ps thanks a bunch
This is what I am talking about flashing now
Edit: Works perfect thanks cant wait for you to get this device Mr Beanstown106
Can international version (N5100) flash this? Will I lost the 3g ability or it does not matter?
Thanks
rfb813 said:
Flashed the Deodexed Rom and it is very smooth. Thanks. Count this to the fund: 21043458XK800762A
Click to expand...
Click to collapse
Can you share your exact setup and what you did to be successful? Twrp? Cwm? Thank you!!
Sent from my GT-N5110 using Tapatalk HD
shaoran_ojo said:
Can international version (N5100) flash this? Will I lost the 3g ability or it does not matter?
Thanks
Click to expand...
Click to collapse
WILL LOOSE 3g i will make a n 5100 version roday
itd be easier if u dump partitioni ask itin general
Sorry for asking here, can someone upload:
framework/framework-res.apk
usr (folder)
vendor (folder)
build.prop
bin/sdcard; rild
etc/vold.fstab
desantim said:
Can you share your exact setup and what you did to be successful? Twrp? Cwm? Thank you!!
Sent from my GT-N5110 using Tapatalk HD
Click to expand...
Click to collapse
I Flashed CWM 5110 Ex#4 with Odin on my Note with auto reboot off. Rebooted into Recovery to check that I had CWM, I did and then rebooted. CWM asked if I wanted to make this my permanent recovery. I said yes. Note then rebooted. I installed Goo Manager so I could easily reboot into Recovery. Did a nandroid backup of my Note's Rom for safety, downloaded the zip file and saved it to my external sdcard (you could use your internal memory) and flashed it. Worked perfectly. I did have to reformat my 64gb sdcard to Fat32 for CWM to recognize it.
desantim said:
Can you share your exact setup and what you did to be successful? Twrp? Cwm? Thank you!!
Sent from my GT-N5110 using Tapatalk HD
Click to expand...
Click to collapse
Flashed with emwno CWM #4 port http://forum.xda-developers.com/showthread.php?t=2244252
Made a backup first wipe and flash there is no progress bar at least it doesn't work properly n CWM so you just have to wait.
emwno said:
Sorry for asking here, can someone upload:
framework/framework-res.apk
usr (folder)
vendor (folder)
build.prop
bin/sdcard; rild
etc/vold.fstab
Click to expand...
Click to collapse
Emwro, here are the files from the Deodexed Rom you asked for:
https://www.dropbox.com/sh/bnxyel2l6t9lm56/X-0cOX2ZFA
beanstown106 said:
WILL LOOSE 3g i will make a n 5100 version roday
itd be easier if u dump partitioni ask itin general
Click to expand...
Click to collapse
Done, hope that help and thanks for your work
shaoran_ojo said:
Done, hope that help and thanks for your work
Click to expand...
Click to collapse
thanks will do the 5100 version when i get home from dinner
Do I need to wipe everything or just cache ?
Nanaki666 said:
Do I need to wipe everything or just cache ?
Click to expand...
Click to collapse
I just wiped cache and dalvik cache and installed.
worked fine
beanstown106 said:
thanks will do the 5100 version when i get home from dinner
Click to expand...
Click to collapse
Yeah N5100 version is much more interesting, because 8 " is portable with 330 g
rfb813 said:
I just wiped cache and dalvik cache and installed.
worked fine
Click to expand...
Click to collapse
did the same just now, working well!
Just as an aside, if you do flash this, some of the prepackaged samsung apps will detect root and will exit upon trying to run them. I dont use those apps anyway, but if you do its just a forewarning
beanstown106 said:
great news i was hoping it would be good the only thing i was worried about was the update binary file but sense we have the same partitions as the note 10.1 i used a known working one and apparently all is good GREAT NEWS!! and ps thanks a bunch
Click to expand...
Click to collapse
One of the best Roms for the S3 was developed by enewman. He started out with the base Rom like you provided and then did a cookbook approach where he provided zippable Mods for things like 4 way reboot, battery icons, etc. This allow you to flash and modify the rom to your choosing. He later developed his own Rom, the Devils Reject. But the initial effort was successful in giving us the ability to modify our Rom. Any chance we can get something like this started until you have the opportunity to develop you own Rom?
Anyone noticed samsung is going backwards with this firmware with regards to auto brightness slider?
JKAY DELUXE [I9300 JB 4.1.2]
This is a completely 100% stock rom built from the P5200XXUAMK8 base. It's in flashable zip format, but there is absolutely no tweaking done to this rom; its primary purpose is as a base for anyone wanting to build a mod rom for the P5200 3G, as well as being there for anyone who wants to return stock without odin.
As it is 100% stock it's fully bloated, odexed, and non-rooted. You can attain root by flashing root.zip (not included in this post, but it's in the main forum) thus, if you have any complaints, bring them to Samsung, not me. Flashing instructions and download link below.
Edit: I've now also posted a deodexed + rooted build. See download link below. No other changes have been made to this version besides deodex/root.
Flashing instructions:
-Full wipe (factory reset in twrp)
-flash ROM
-reboot, let sit for about 10 minutes
-You're now 100% stock. Enjoy!
Download link:
100% stock
Rooted/Deodexed
Thanks a bunch, this will save me somewhere down the road !
Thanks a bunch, this will save me somewhere down the road ! :good:
I just opened my Tab 3, 10.1 Build JDQ39.P520UEUAMK1.
So the P5200XXUAMK8 is newer?
serendipityguy said:
Thanks a bunch, this will save me somewhere down the road ! :good:
I just opened my Tab 3, 10.1 Build JDQ39.P520UEUAMK1.
So the P5200XXUAMK8 is newer?
Click to expand...
Click to collapse
I think it's just a region difference, will work just fine on your tab though, there's no difference in the internals
Just changed hosts to mediafire due to reports of problems with mega
just added a deodexed / rooted build. No other changes have been made to the second build
I have fc on galery and camera what can i do to fix them ?
Sent from my GT-P5200 using XDA Premium HD app
Lump800 said:
I have fc on galery and camera what can i do to fix them ?
Sent from my GT-P5200 using XDA Premium HD app
Click to expand...
Click to collapse
Flash stock Rom via Odin only this fix this Problem ... Have the same Problem
Sent from GT-I9305 CM11 20140131-NIGHTLY + Agni PureCM v2.6c
And after that I can flash directly the file from above?! To get rot and deodexed?
Sent from my GT-I9305 using XDA Premium 4 mobile app
Yes ... Don't forget to flash twrp ... Odin flash the stock recovery with the Firmware
Sent from GT-I9305 CM11 20140131-NIGHTLY + Agni PureCM v2.6c
Would you please make a mirror maybe at mega? I think mediafire sucks really hard. Just visit it without adblick and you know why
Max4000 said:
Would you please make a mirror maybe at mega? I think mediafire sucks really hard. Just visit it without adblick and you know why
Click to expand...
Click to collapse
hmm, strange. I have a mediafire pro account, the downloads should be direct links. Gonna contact mediafire about it
Restl3ss said:
hmm, strange. I have a mediafire pro account, the downloads should be direct links. Gonna contact mediafire about it
Click to expand...
Click to collapse
hi guys
just a question
deodexed version is flashable by recovery or by odin?
thanks in advance
I have boot loop on p5200 but i don't know what was wrong I downloaded a stock rom i flashed it with odin and it was all good but the tab keeps rebooting on samsung logo
tried to flash twr and do all the wipes but still rebooting i can access normally download and recovery mode
if i flashed ur rom will it fix this?
saba7o0o said:
I have boot loop on p5200 but i don't know what was wrong I downloaded a stock rom i flashed it with odin and it was all good but the tab keeps rebooting on samsung logo
tried to flash twr and do all the wipes but still rebooting i can access normally download and recovery mode
if i flashed ur rom will it fix this?
Click to expand...
Click to collapse
check the recovery that you are using...
where is the md5 file i downloaded the stock.zip and cant find it
Newby question
Hello, is this the correct download for unrooting my tab 3?
I have a cwg mod installed and cannot get my firmware updated by samsung software
it wont update from the tab also.
greetings wolfgang
It seems i cant download the file from the link here rapid gator net/ file /72cb51702f19de71ac6ce8dbdcfcc611
semms like it is to big to be downloaded in the free time slot...
bootloop after flashing , boots reaches galaxy tab logo then reboots again
Same here! bootloop after flashing.
TWRP 2.8.7.1