[ROM] Deodexed XXMB2 without Preload - Galaxy Ace II Android Development

I leave here the JB 4.1.2 Leak in a Deodexed version. (For testing)
- Don't use Preload.
- It's a complete ROM , not only app and framework.
- Busybox
DISCLAIMER 1:
I am not responsible in ANY way if this bricks your phone/ goes into bootloop. You, and YOU ONLY, is responsible for what happened to your phone.
To avoid problems with system size, the ROM don't have some apps like chaton or music_hub . If you need to install some of them you can install those after.
I removed some ringtones too.
Because that , is important to build a good preload version.
Installation:
Copy zip to SD Card
Download and install CWM 6.0.2.8
Do a Backup (You can use it to restore data if you want to wipe data/factoryreset in this step)
Format system from CWM to have a fresh installation.
Install zip from CWM
[Optional] wipe cache/dalvik-cache
If you don't format data or wipe data/factory reset, you will have your previous phone but deodexed.
Reboot
Download
Version 2.1 : 22/02/2013 : http://d-h.st/nVS To have root after flash the ROM, flash root.zip from Shaaan
Version 2 : 19/02/2013 : http://d-h.st/OF8
Version 1 : http://d-h.st/2zE
Credits:
01. Shaaan: CWM and a lot of things
02. Frappeti Deodexed ROM in Galaxy Advance
03. Exelter : His deodexed ROM.
If you want to enable the Ripple Effect from Kirillos flash this zip:
http://d-h.st/UUr
Credits to Kirillos

cbolumar said:
I leave here the JB 4.1.2 Leak in a Deodexed version. (For testing)
- Don't use Preload.
- It's a complete ROM , not only data and framework.
- Busybox and root included.
Click to expand...
Click to collapse
-Complete ROM? can u specify that a little more than just (not only data and framework)
-Preload?
-What is the difference between this Rom and Estelter's one?

mojito0 said:
-Complete ROM? can u specify that a little more than just (not only app and framework)
-Preload?
-What is the difference between this Rom and Estelter's one?
Click to expand...
Click to collapse
This is a complete ROM : app, lib,etc,xbin,framework,.....build.prop,.. You have a new system and because that, you can use it as base to build a custom ROM.
Estelter change the app and framework directories to deodex apps and jars but you need flash the others system directories with odin before.
Preload is a specific area Sansung use like a extension of the system partition. In GB we don't use that area. I remove some apps from /system/app and the system partition size is enough . I don't need at the moment the preload partition.

Can I flash this zip from GB??

loof13 said:
Can I flash this zip from GB??
Click to expand...
Click to collapse
Not. You must use Odin the first time because :
- You need to change the partitions map to JB
- Flash the JB modem, kernel, baseband, CSC, etc.
This ROM is a complete /system . It is the part of the ROM we change in the custom ROMS.

Maybe not the smartest question, but...
Can i change vold.stab and framework-res.apk inside your pack, so that i want to have both effect right after ROM installation (vold.stab already switched, so there could be some mess if i don't change it before flashing of the rom)?

judas1977 said:
Maybe not the smartest question, but...
Can i change vold.stab and framework-res.apk inside your pack, so that i want to have both effect right after ROM installation (vold.stab already switched, so there could be some mess if i don't change it before flashing of the rom)?
Click to expand...
Click to collapse
Yes , no problem.

What about flash counter ? It will rise up after flash ?

AW: [ROM] Deodexed XXMB2 without Preload
michal_ag said:
What about flash counter ? It will rise up after flash ?
Click to expand...
Click to collapse
It raise up if you use odin.
But you can reset counter
Sent from my GT-I8160 using xda app-developers app

michal_ag said:
What about flash counter ? It will rise up after flash ?[/QUOTE
Non because you use odin with stock ROM. After you flash this ROM using CWM. Your counter remain 0.
Click to expand...
Click to collapse

when you insert the headphones the sound is played outside speaker.. please fix this bug

Odp: [ROM] Deodexed XXMB2 without Preload
I confirm audio routing issue. I just thought that my phone is broken. Good to know that's rom's bug
Wysyłane z mojego GT-I8160 za pomocą Tapatalk 2

BUG Found: Video Recording does not work. I can take pictures though.

Version 2
I left version 2 in the first post. I think it resolve both bugs.

cbolumar said:
I left version 2 in the first post. I think it resolve both bugs.
Click to expand...
Click to collapse
yep the bugs are resolved but now the rom aren't rooted, and after flash the root by shaan supersu doesn't work.. are u any ideas?

slade9220 said:
yep the bugs are resolved but now the rom aren't rooted, and after flash the root by shaan supersu doesn't work.. are u any ideas?
Click to expand...
Click to collapse
OK , yesterday i didn't have time to fix it. I hope to fix it today.

R: [ROM] Deodexed XXMB2 without Preload
cbolumar said:
OK , yesterday i didn't have time to fix it. I hope to fix it today.
Click to expand...
Click to collapse
I ceck with adb and in the system/xbin the file 'su' is missing.. i hope this can help you, thanks for your work!
Inviato dal mio GT-I8160 con Tapatalk 2

Version 2.1 uploading . To have root flash the ROM and after flash the root.zip from Shaaan.
I had a lot of problems with the root access. I don't know the reason.

cbolumar said:
Version 2.1 uploading . To have root flash the ROM and after flash the root.zip from Shaaan.
I had a lot of problems with the root access. I don't know the reason.
Click to expand...
Click to collapse
check updater-script

cbolumar said:
Version 2.1 uploading . To have root flash the ROM and after flash the root.zip from Shaaan.
I had a lot of problems with the root access. I don't know the reason.
Click to expand...
Click to collapse
Put the root files in the rom. But you need to set the correct permissions if you want it to work.
Sent from my Galaxy Ace 2 i8160

Related

Paranoid Android v2

Do not download! Currently I'm having some issues with FXP146 and my port isn't booting. Till I fix the problem,please enjoy your FXP146 by FXP team.
For UNLOCKED BOOTLOADER only!!
Instruction
Download the ROM here: http://www.mediafire.com/?g21re4tk7698xc2
Flash the ROM via Recovery
Flash Gapps here http://goo.im/gapps/gapps-ics-20120429-signed.zip
Wipe
Reboot,Enjoy
*If your statusbar is gone after the first reboot: longpress Powerbutton > Toggle Statusbar
If you want to Activate Tablet mode go to Settings > Paranoid Settings > Enable tablet UI
Please,no MIRROR for my ROM
Flash it at you own risk!
Changelog
JellyBean Flavored
Speed Improvement
New SU binary updated (via flashable zip)
New Fonts
Highlights
FXP146 base
Paranoid settings
Common Problems that user had :
1.error 7 ( I don't have the problem?) : extracted the rom.zip you download,flash the boot.img via fastboot.
2. Wifi issue (I never had the problem) : Do a full wipe after flashing the ROM.
3. fonts are too small : configure it by going into Settings>System>Font Size.
4. Wifi turned off when screen is off : (CM9 bug)
5. Apps like Viber doesn't work : Flash Gapps Again,go into Panaroid Settings>enable hybrid mode>list of apps google Play store>set it to default ui and default dpi,and finally,clear app data.
6. SuperUser issues : flash this after the ROM : http://www.mediafire.com/?n9z1i98lv1b1vzl thanks to XDA user Irseq
Bugs
Same as FXP146 (youtube video,camera,etc)
Everything else works
Don't forget to hit the thanks button..
Huge thanks to FXP
reserved
also reserved
This is awesome
I simply LOVE LOVE Paranoid Android, one of the best Custom ROMs ever!
Just google this. Looks AWESOME!!!!!
cant wait man.. cant wait... just this morning i saw it in XPU thread and was really jealous.... now we will have paranoida for our sola too.. thats great
So will there be an actual ROM? What's the use of opening an empty thread?
tinnef said:
So will there be an actual ROM? What's the use of opening an empty thread?
Click to expand...
Click to collapse
The port is completed
Now I have to maintain 3 devices,just so you know
Wait...That's an JB rom for Sola ?!
Charlus97 said:
Wait...That's an JB rom for Sola ?!
Click to expand...
Click to collapse
Mate, its based on FXP 146 which is still ICS, there is no JB for Sola yet.
Camera and Bluetooth working properly?
Sent from my MT27i using xda premium
Screenshot please
Is it OK to get stuck soooooooo long (more than 25 minutes) in bootanimation? ( I guess not )
My Experiments:
I just flashed it with it's own cwm (from boot.img in .zip file) it installed probably.
I installed gaaps and ok again.
when i was about to restart it says root access maybe lost would you mind to fix it?
I enter yes ... stuck
I flash again and enter no ... stuck
flash only rom but not gaaps ... stuck
BTW: I did wipe in every sections! to make sure it's cleen
looks like bootloop is in this rom
sijav said:
Is it OK to get stuck soooooooo long (more than 25 minutes) in bootanimation? ( I guess not )
My Experiments:
I just flashed it with it's own cwm (from boot.img in .zip file) it installed probably.
I installed gaaps and ok again.
when i was about to restart it says root access maybe lost would you mind to fix it?
I enter yes ... stuck
I flash again and enter no ... stuck
flash only rom but not gaaps ... stuck
BTW: I did wipe in every sections! to make sure it's cleen
looks like bootloop is in this rom
Click to expand...
Click to collapse
+1
sijav said:
looks like bootloop is in this rom
Click to expand...
Click to collapse
Same problem here.
The attached part of my logcat seems to be the recurring bit.
THANKS!!!
brendow96 said:
THANKS!!!
Click to expand...
Click to collapse
Did you manage to get it boot?
No
Do we need to flash boot.img of CM9 ? (I know that he rom isn't working for now)
Charlus97 said:
Do we need to flash boot.img of CM9 ? (I know that he rom isn't working for now)
Click to expand...
Click to collapse
yes of course
Send from my MayuSola (まゆそら)

[4.1.2][CWM]Stock Samsung Rom[Deodexed][Root]

Hi All
Just finished compiling the Original Samsung 4.1.2 test firmware for CWM flashing
No changes has been made at all except Root that has been added and everything being DEODEXED
Its being uploaded atm to my Google Drive account so it should be easier to download and I will post the link as soon as its up and shared.
Please be aware of the following:
1. This is completely stock with the stock kernel that has the brick bug in it SO DON'T FORMAT EMMC AFTER YOU INSTALL IT
2. It will remove CMW and CMW needs to be installed again with Mobile odin or Odin pc.
Installation should be as per any other CWM rom:
1. Copy to SD card
2. Wipe data/factory
3. Install from the SD
4. Clear Dalvic and reboot
If you want to move away from this rom follow the following steps just to be save:
1. Use mobile odin or Odin pc to install CMW
2. Flash any other kernel like Siyah or similar
3. Do a EMMC format - ONLY AFTER STEP 2. Please dont forget to flash a non brickbug kernel 1st
4. Install other rom as desired
Download Link:
http://forum.xda-developers.com/showthread.php?t=1998205
Thanks to LegendK for eventually finding the way
Additional Installs:
Philz Kernel removing Brick bug - Flash it through recovery mode
Philz Kernel removing Brick bug - Flash through Odin
Thanks PhilZ
Additional Notes:
After installing the Rom please install one of the "Additional Installs" kernels to remove the brick bug. Once done use Rom as usual
good job
toxicdust said:
Original Samsung 4.1.2 test firmware for CWM flashing
Click to expand...
Click to collapse
Much obliged, I'm super keen to try this new version, only drama I'm a bit n00b-ish when it comes to creating a CWM-flashable ZIP from what we can grab from SamFirmwares and I'd prefer to be able to hack the apk's and Media folder before I throw it into my i9100. Looking forward to getting hold of what you've cooked up...
ADD: Oh yeh, from what I've heard, the Philz-CWM6 kernel is supposed to be the best for this F/W, check out his thread...
Code:
http://forum.xda-developers.com/showthread.php?t=1877270
looks good!!!!
Hope you can repack it with the PhilZ kernel(no eMMC brick bug) if there is time! You would save a lot of n00bs breaking their device! Just my 2 cents!
Orr.Penn.18 said:
Hope you can repack it with the PhilZ kernel(no eMMC brick bug) if there is time! You would save a lot of n00bs breaking their device! Just my 2 cents!
Click to expand...
Click to collapse
+1000
Gesendet von meinem GT-I9100 mit Tapatalk 2
how did u make the zip?
when i pulled /system and kernel it gave me a boot loop
Well done and thank you! I'm DLing when its up!
awesome!!!!!!!!!!!!!!!!!!!!!!!!!
iamnotkurtcobain said:
+1000
Click to expand...
Click to collapse
+1001
Orr.Penn.18 said:
Hope you can repack it with the PhilZ kernel(no eMMC brick bug) if there is time! You would save a lot of n00bs breaking their device! Just my 2 cents!
Click to expand...
Click to collapse
but pls upload current version for ppl who really need it in shortest time.
Its up
Will repack with the Phillz kernel as well and replace once done
toxicdust said:
Its up
Will repack with the Phillz kernel as well and replace once done
Click to expand...
Click to collapse
“You need permission to access this item.
You are signed in as *************@gmail.com, but you don't have permission to access this item. You can request access from the owner or choose a different account. Learn more”
Same problem
Give me te permission PLEASE
al*****[email protected]
permission error .!!! plz fix it
@toxicdust Can you please also upload a 180DPI dialer and TWlauncher ?
Im sure everybody would LOVE that
Thanks a lot and great job
LOL ... sorry about that. Should be open now
Ok the Philz kernel works without problems that I can see atm.
Will repack with that as well for the noob friendly version.
Others can just install his kernel from recovery mode to be on the safe side
Philz kernel available from link below, and don't forget to say Thanks...
Code:
http://forum.xda-developers.com/showpost.php?p=31310650&postcount=1
djshotty said:
Philz kernel available from link below, and don't forget to say Thanks...
Code:
http://forum.xda-developers.com/showpost.php?p=31310650&postcount=1
Click to expand...
Click to collapse
Linked the correct ones to use in the OP so that ppl don't get confused with the so many he has and by accident install the wrong one.

★ [Rom][N5110-DMD1][4.1.2] Stock Root Deodex [04/27/13]★

This is a Deodexed Version Of the newest JellyBean 4.1.2 N5110UEDMD1
Kinda Bored and Noticed you guys have nothing to flash so figured id help out a bit
I currently dont have the tablet but plan on getting one soon, please let me know how it goes it should be perfect
Features:
Rooted
insecure boot.img
BusyBox
Zipaligned
Deodexed
Init.d support
adb as root
Bash
Nano
Download: http://www.androidfilehost.com/?fid=22926241640220009
md5: b5a83f9c4aecc2fee0f2bdf4784a7223
Disclaimer: nothing has been edited this is a full stock rom that you would expect to get from samsung just rooted and deodexed for easy modability,themability
Thanks to:
SamMobile - for the basefirmware package
Dsixda - for the kitchen used to deodex
ChainFire - for superSU
Reserved
Flashed the Deodexed Rom and it is very smooth. Thanks. Count this to the fund: 21043458XK800762A
rfb813 said:
Flashed the Deodexed Rom and it is very smooth. Thanks. Count this to the fund: 21043458XK800762A
Click to expand...
Click to collapse
great news i was hoping it would be good the only thing i was worried about was the update binary file but sense we have the same partitions as the note 10.1 i used a known working one and apparently all is good GREAT NEWS!! and ps thanks a bunch
This is what I am talking about flashing now
Edit: Works perfect thanks cant wait for you to get this device Mr Beanstown106
Can international version (N5100) flash this? Will I lost the 3g ability or it does not matter?
Thanks
rfb813 said:
Flashed the Deodexed Rom and it is very smooth. Thanks. Count this to the fund: 21043458XK800762A
Click to expand...
Click to collapse
Can you share your exact setup and what you did to be successful? Twrp? Cwm? Thank you!!
Sent from my GT-N5110 using Tapatalk HD
shaoran_ojo said:
Can international version (N5100) flash this? Will I lost the 3g ability or it does not matter?
Thanks
Click to expand...
Click to collapse
WILL LOOSE 3g i will make a n 5100 version roday
itd be easier if u dump partitioni ask itin general
Sorry for asking here, can someone upload:
framework/framework-res.apk
usr (folder)
vendor (folder)
build.prop
bin/sdcard; rild
etc/vold.fstab
desantim said:
Can you share your exact setup and what you did to be successful? Twrp? Cwm? Thank you!!
Sent from my GT-N5110 using Tapatalk HD
Click to expand...
Click to collapse
I Flashed CWM 5110 Ex#4 with Odin on my Note with auto reboot off. Rebooted into Recovery to check that I had CWM, I did and then rebooted. CWM asked if I wanted to make this my permanent recovery. I said yes. Note then rebooted. I installed Goo Manager so I could easily reboot into Recovery. Did a nandroid backup of my Note's Rom for safety, downloaded the zip file and saved it to my external sdcard (you could use your internal memory) and flashed it. Worked perfectly. I did have to reformat my 64gb sdcard to Fat32 for CWM to recognize it.
desantim said:
Can you share your exact setup and what you did to be successful? Twrp? Cwm? Thank you!!
Sent from my GT-N5110 using Tapatalk HD
Click to expand...
Click to collapse
Flashed with emwno CWM #4 port http://forum.xda-developers.com/showthread.php?t=2244252
Made a backup first wipe and flash there is no progress bar at least it doesn't work properly n CWM so you just have to wait.
emwno said:
Sorry for asking here, can someone upload:
framework/framework-res.apk
usr (folder)
vendor (folder)
build.prop
bin/sdcard; rild
etc/vold.fstab
Click to expand...
Click to collapse
Emwro, here are the files from the Deodexed Rom you asked for:
https://www.dropbox.com/sh/bnxyel2l6t9lm56/X-0cOX2ZFA
beanstown106 said:
WILL LOOSE 3g i will make a n 5100 version roday
itd be easier if u dump partitioni ask itin general
Click to expand...
Click to collapse
Done, hope that help and thanks for your work
shaoran_ojo said:
Done, hope that help and thanks for your work
Click to expand...
Click to collapse
thanks will do the 5100 version when i get home from dinner
Do I need to wipe everything or just cache ?
Nanaki666 said:
Do I need to wipe everything or just cache ?
Click to expand...
Click to collapse
I just wiped cache and dalvik cache and installed.
worked fine
beanstown106 said:
thanks will do the 5100 version when i get home from dinner
Click to expand...
Click to collapse
Yeah N5100 version is much more interesting, because 8 " is portable with 330 g
rfb813 said:
I just wiped cache and dalvik cache and installed.
worked fine
Click to expand...
Click to collapse
did the same just now, working well!
Just as an aside, if you do flash this, some of the prepackaged samsung apps will detect root and will exit upon trying to run them. I dont use those apps anyway, but if you do its just a forewarning
beanstown106 said:
great news i was hoping it would be good the only thing i was worried about was the update binary file but sense we have the same partitions as the note 10.1 i used a known working one and apparently all is good GREAT NEWS!! and ps thanks a bunch
Click to expand...
Click to collapse
One of the best Roms for the S3 was developed by enewman. He started out with the base Rom like you provided and then did a cookbook approach where he provided zippable Mods for things like 4 way reboot, battery icons, etc. This allow you to flash and modify the rom to your choosing. He later developed his own Rom, the Devils Reject. But the initial effort was successful in giving us the ability to modify our Rom. Any chance we can get something like this started until you have the opportunity to develop you own Rom?
Anyone noticed samsung is going backwards with this firmware with regards to auto brightness slider?
JKAY DELUXE [I9300 JB 4.1.2]

[ROM][L3] ParsLand-gb-e400 * v1.0 [Stock,lite,fast...]

the first gingerbread rom with persian/arabic support released first version with v10S baseband (2.3.6)
whats inside in v3.0
deleted so many apps / widget / live wallpaper = u can download all of them from optional section
based on v10S
overclock/tun/swap for kernel
sdmerge / 1gb free
rtl support
tts support
remove statuses bar music widget
slimed as possible (just 100 mg)
g-apps included
deodex
zipaligned
root
expanded power menu
crt animation
over scroll glow
use default font
use ics icon
lg ui2 theme
use holo launcher instead of default one
use middle east keyboard
include file manager
Click to expand...
Click to collapse
changelog
v1.0
first release
v2.0
change baseband to v10m
delete eu language
delete tts
update google play to 4.1.6
fix supersu problem
fix rtl in web
v3.0
change baseband to v10s
update google play to 4.1.10
add expanded power menu
some change in theme
Click to expand...
Click to collapse
optional
for restore deleted apps,flash this from cwm
for use eu keyboard,flash this from cwm
Click to expand...
Click to collapse
how to install ROM
flash official rom
flash official CWM
download costum rom and put them on ur memory card
go to cwm
wipe data /cache/dlvk cache
then go to this address
install zip from sdcard/chose zip from sdcard/and select it
enjoy the rom
Click to expand...
Click to collapse
DOWNLOAD
ParsLand-gb-e400 * v1.0
thanks to
gellmar for sdmerge
yayakuya for tut of removing music statusbar
Click to expand...
Click to collapse
saved............
optional package will upload in some hours
Has eu languages support your rom?
diego88it said:
Has eu languages support your rom?
Click to expand...
Click to collapse
its based on v10q
so it has ue languages
I get damaged sd card after flashing your rom, i think its from sdmerge, and i cant flash any other rom since it wont see the internal sd.
Any help pls ?
corsair2k said:
I get damaged sd card after flashing your rom, i think its from sdmerge, and i cant flash any other rom since it wont see the internal sd.
Any help pls ?
Click to expand...
Click to collapse
READ carefully first post about how to install rom
how to install ROM
flash official rom
flash official CWM
download costum rom and put them on ur memory card
go to cwm
wipe data /cache/dlvk cache
then go to this address
install zip from sdcard/chose zip from sdcard/and select it
Click to expand...
Click to collapse
So you have no ideea, i am not a newbie in flashing roms, i think your merge script is poorly implemented .
Anyway, i had to revert to stock with kdz, and lost my vcf save. I felt like hitting you with a hammer for not pointing unreversable stuff.
corsair2k said:
So you have no ideea, i am not a newbie in flashing roms, i think your merge script is poorly implemented .
Anyway, i had to revert to stock with kdz, and lost my vcf save. I felt like hitting you with a hammer for not pointing unreversable stuff.
Click to expand...
Click to collapse
if u arent newbie,u should know that...
if u installed sdmerge before,you should flash official rom at first (for erase it) & then going to flash new rom
where is the v2 sir
and could u please upload the file to other site?
tia
v3 man ??

Next updated stock DEODEXED Rom J727PVPS3ARA1 Galaxy J727P

Disclaimer I am not responsible for your phone bricking or anything else this rom flashes best from stock firmware do not flash this Rom from lineage 14.1 without restoring your backup an reinstalling firmware it will not work right ! Read all instructions before starting THANK YOU !!!!
Galaxy J727P
This is a updated Deodexed Rom made from the Latest firmware files J727PVPS3ARA1 build I Deodexed it added tweaks an added xposed framework an app this was made using ASSAYYED KItchen hope everyone likes it !
https://mega.nz/#!mFsE0bxa!pyEk_n4QhSxBUxAIdtX-Zc83B71kTioXTYWfeo3t-Xc
Install with the twrp of your choice I'm using twrp 3.2.1-1 now !
1 wipe data factory reset wipe system
2 flash zip
3 wipe cashe an dalvilk cashe
4 reboot give it about 5 min to boot
5 If it stop in setup pull Battery an reboot it will be fine .
6 when you are finished setting up go into xposed app an update framework if you like xposed !
6.2 If you don't want xposed go into xposed app an uninstall framework then go into Root explorer system app xposed apk an Delete apk !
7 Enjoy !!
Here is my Build with ADB enabled an encriptoin in kernel disabled same install as #1
This is a Rooted Deodexed an Tweaked with ADB enabled encrypt an DM verity Disabled for you out there that don't like Xposed same install process as the others hope you like it !!
An yes in all of these Builds knox has bin removed an security log agent too ! enjoy
Build #3 just a little lighter then the RDAV Build so enjoy !
https://mega.nz/#!rcsXCJKB!gsjdknb7A-73BfLAqWV9Ai7phxwjUURYxY3_VHA7TB8
An a big thanks out to RS.85243 for the link for the new firmware
https://www.androidfilehost.com/?w=files&flid=244089
An yes anyone that would like to use any of my Builds for a themed Rom or anyone that want to build an use my Rom as a base you have my Blessing !!
Here is a return to stock Rooted twrp flashable Rom for you if you want it !
https://mega.nz/#!3ZEFXCiY!MInpkXNZnjaPHU9hztfbVvyZskwZLk_AtNI-_sXqid4
same install an will stop in stepup just pull an replace battery an reboot !
Link to twrp
https://twrp.me/samsung/samsunggalaxyj72017qcomsprint.html
peter couniaz said:
Galaxy J727P
This is a updated Deodexed Rom made from the Latest firmware files J727PVPS3ARA1 build I Deodexed it added tweaks an added xposed framework an app this was made using ASSAYYED KItchen hope everyone likes it !
https://mega.nz/#!bB1GTRxK!QKJWri0Y4glfW1R7Qu9zdl2YJCemEPJK1NFddK2qhAI
Install with the twrp of your choice I'm using twrp 3.2.1-1 now !
1 wipe data factory reset wipe system
2 flash zip
3 wipe cashe an dalvilk cashe
4 reboot give it about 5 min to boot
5 If it stop in setup pull Battery an reboot it will be fine .
6 when you are finished setting up go into xposed app an update framework if you like xposed !
6.2 If you don't want xposed go into xposed app an uninstall framework then go into Root explorer system app xposed apk an Delete apk !
7 Enjoy !!
An a big thanks out to RS.85243 for the link for the new firmware
https://www.androidfilehost.com/?w=files&flid=244089
Click to expand...
Click to collapse
Now who is this Rom for ?
Sent from my SM-J727P using Tapatalk
Galaxy J727P
Bee101 said:
Now who is this Rom for ?
Sent from my SM-J727P using Tapatalk
Click to expand...
Click to collapse
This is for the J727P new firmware update just made a Quick DEODEXED ROM with add ADB AN REMOVE ENCRYPTION SUFF Done !
New firmware is in bottom link !
peter couniaz said:
This is for the J727P new firmware update just made a Quick DEODEXED ROM with add ADB AN REMOVE ENCRYPTION SUFF Done !
New firmware is in bottom link !
Click to expand...
Click to collapse
Take your time...no rush on my part...what is new with update...I ok with the last build.
Sent from my SM-J727P using Tapatalk
Galaxy J727P
Bee101 said:
Take your time...no rush on my part...what is new with update...I ok with the last build.
Sent from my SM-J727P using Tapatalk
Click to expand...
Click to collapse
Will do it's all good !!
virgin mobile Galaxy J727P
Bee101 said:
Take your time...no rush on my part...what is new with update...I ok with the last build.
Sent from my SM-J727P using Tapatalk
Click to expand...
Click to collapse
one last Build for this Firmware is up in OP for you that don't like Xposed Rom #3 Just put it up today 1/30/2018 . Hope you like it !!
peter couniaz said:
Galaxy J727P
This is a updated Deodexed Rom made from the Latest firmware files J727PVPS3ARA1 build I Deodexed it added tweaks an added xposed framework an app this was made using ASSAYYED KItchen hope everyone likes it !
Build # 1
https://mega.nz/#!bB1GTRxK!QKJWri0Y4glfW1R7Qu9zdl2YJCemEPJK1NFddK2qhAI
Install with the twrp of your choice I'm using twrp 3.2.1-1 now !
1 wipe data factory reset wipe system
2 flash zip
3 wipe cashe an dalvilk cashe
4 reboot give it about 5 min to boot
5 If it stop in setup pull Battery an reboot it will be fine .
6 when you are finished setting up go into xposed app an update framework if you like xposed !
6.2 If you don't want xposed go into xposed app an uninstall framework then go into Root explorer system app xposed apk an Delete apk !
7 Enjoy !!
Here is my Build with ADB enabled an encriptoin in kernel disabled same install as #1
Build # 2
https://mega.nz/#!mFsE0bxa!pyEk_n4QhSxBUxAIdtX-Zc83B71kTioXTYWfeo3t-Xc
Build #3
https://mega.nz/#!mVNTBT4K!Oa519-9wCqRndfj0JTkwNU1jS2zdw4whRKhdOZytRAs
This is a Rooted Deodexed an Tweaked with ADB enabled encrypt an DM verity Disabled for you out there that don't like Xposed same install process as the others hope you like it !!
An a big thanks out to RS.85243 for the link for the new firmware
https://www.androidfilehost.com/?w=files&flid=244089
Click to expand...
Click to collapse
This is exactly what I wanted, thank you. Just bought this phone, havnt had a deodexed rom since I had an s3 running wicked x bare bones deodexed on 4.4.2. Any other plans?
Hey whats the md5 on #3 deodex build. I have it downloaded and ready to go just need to check integrity.
Galaxy J727P
n00b-xda-disciple said:
Hey whats the md5 on #3 deodex build. I have it downloaded and ready to go just need to check integrity.
Click to expand...
Click to collapse
It all good that's my faverit #3 build should work fine but it's a flushable ZIP for twrp md5 are tar file for Odin you flash the AP BL CP an csc files threw odin if you want to go back to stock unRooted ! Thay are the latest firmware files in the bottom link ! If that's what you asking !
Need stock firmware for j727p
I did the stupidest thing. I was having a problem with adb devices unauthorize , I update udev rules ,usb on . Still did not work....so a turn usb debugging off and dev. options off then reboot. You geuss it phone will noy boot....ftp lock. Are you familar with this problem... I am guessing I still can boot to recovery ? will check that but I need stock firmware files please.
Galaxy J727P
lamike said:
I did the stupidest thing. I was having a problem with adb devices unauthorize , I update udev rules ,usb on . Still did not work....so a turn usb debugging off and dev. options off then reboot. You geuss it phone will noy boot....ftp lock. Are you familar with this problem... I am guessing I still can boot to recovery ? will check that but I need stock firmware files please.
Click to expand...
Click to collapse
Stock firmware file are in first post at the bottom ! Where I thanked the person for posting them !
Download the AP ,BL ,.CP AN CSC files an flash threw Odin ! Good luck ! If you still can boot twrp that mite be your best beat ! I just don't know ! Try flashing my #3 should turn debugging back on !
peter couniaz said:
Galaxy J727P
An a big thanks out to RS.85243 for the link for the new firmware
https://www.androidfilehost.com/?w=files&flid=244089
Click to expand...
Click to collapse
Just to be clear, is this a link for the un-rooted, completely stock rom? I went ahead and grabbed a copy of the files from the site, but I just want to be sure of what this is in case I need to flash a bare stock rom- a different "stock" rom I found was labeled for virgin mobile, but seemed to be for t-mobile or some other carrier (wouldn't recognize my sprint/vm sim to use data, but texting still worked fine)
Also- somewhat unrelated to that link but related to this post, I flashed the #3 rom and it flashed/booted successfully but it's stuck in the initial setup at "just a sec..." or what I assume is looking for updates- regardless of if I'm using wifi or data. Is there some way around this? It's been sitting there for several minutes...I've tried the home button and sliding the notification bar down but neither worked
Galaxy J727P
mehpersonguy0 said:
Just to be clear, is this a link for the un-rooted, completely stock rom? I went ahead and grabbed a copy of the files from the site, but I just want to be sure of what this is in case I need to flash a bare stock rom- a different "stock" rom I found was labeled for virgin mobile, but seemed to be for t-mobile or some other carrier (wouldn't recognize my sprint/vm sim to use data, but texting still worked fine)
Also- somewhat unrelated to that link but related to this post, I flashed the #3 rom and it flashed/booted successfully but it's stuck in the initial setup at "just a sec..." or what I assume is looking for updates- regardless of if I'm using wifi or data. Is there some way around this? It's been sitting there for several minutes...I've tried the home button and sliding the notification bar down but neither worked
Click to expand...
Click to collapse
Yes it is it is the stock firmware !!! #3 when it stop setup PULL battery an reboot it will be fine this is all in my first post !! All you had to do was follow the instructions in my post !!
peter couniaz said:
Yes it is it is the stock firmware !!! #3 when it stop setup PULL battery an reboot it will be fine this is all in my first post !! All you had to do was follow the instructions in my post !!
Click to expand...
Click to collapse
I fixed it, rebooting didn't help- I had to pull the sim card to get through the setup (with wifi turned off) then re-insert the sim after getting past that point
virgin mobile Galaxy J727P
mehpersonguy0 said:
I fixed it, rebooting didn't help- I had to pull the sim card to get through the setup (with wifi turned off) then re-insert the sim after getting past that point
Click to expand...
Click to collapse
Did you flash my Rom after Running lineage 14.1 if so that was your problem this works best if flashed from stock firmware !!!!!
QUOTE=peter couniaz;75472627]It all good that's my faverit #3 build should work fine but it's a flushable ZIP for twrp md5 are tar file for Odin you flash the AP BL CP an csc files threw odin if you want to go back to stock unRooted ! Thay are the latest firmware files in the bottom link ! If that's what you asking ![/QUOTE]
I was talking about the integrity of the download. Sometimes files get corrupted during download and after file transfers. It's the only sure way to tell if you have the same exact files you were trying to get. I use md5 checker to double check. If it's the same, flash away. If it's different, the file needs to be redownloaded. I guess I'm just spoiled by @bilgerryan , he provided an md5 for every Rom Build he posted. It's all good though. I'll backup and try it out. Cheers.
This is what md5 checker says it is.
Galaxy J727P
n00b-xda-disciple said:
This is what md5 checker says it is.
Click to expand...
Click to collapse
Ok got you that's new for me thanks !
An here is something that you mite like !
https://forum.xda-developers.com/ga...pp-touchwiz-oreo-beta-stock-launcher-t3702023
Go to mirror link an download launcher rename it TouchWizHome_2016C.apk replace you original with this an set permissions to rw-r--r-- using Rootexplorer an reboot double chick it two times before reboot !
Thank you for you hard work on this device! Without your time and skill set honestly we were at a stand still in till you saved the day. Your rooted/deodexed Roms have worked each time I used them....
Just want to personal say THANK YOU for your development and hard work on this device! Please keep at it...
Flashed and working great sir, thank you for the deodexed tweaked rom. There is still knox remnants in the build but it's completely disabled notheless; I went ahead and cleaned it up.
I'm really impressed with the added build prop tweaks. Saved me a lot of time, I was going to put a bunch of those on there after I flashed.
My only question is, did you try them all out or is there a chance some don't work? Great job man, I recommend #3 download for sure.

Categories

Resources