I made a terrible mistake, I followed the instructions to update to MiniCM6 and forgot the 'Factory Reset' before restarting my phone.
Now the X11 mini keeps rebooting in loop, I cannot access xRecovery any more. When I withdraw the battery and plug the usb when pressing the back button, I can flash with FlashTool.exe again as I needed before to have the baseband 015.
I don't know what to to and cannot find any clue on the forum.
tomorrow will be a day without phone... back to the 80's
Someone knows what I could do?
(To be more precise I uploaded MiniCM7, not MiniCM6)
The software Sony PC companon told me that there is not version yet available for this model, very strange after warning me that all my data would be deleted I hoped a full restore (it also requires a start with the back button pressed)
Do a SEUS repair, install recovery through the flash tool and then go to the Mini PRO forum and download their ROMs because a Mini Pro cannot use a Mini (without the keyboard) ROM and visa versa.
Let this be a lesson to always follow the instructions... thats why they there...
Good luck!!
christophermaisch said:
Do a SEUS repair
Click to expand...
Click to collapse
I have been trying that from the beginning and it kept telling me
"there is no software available for your phone yet, please try again later" when I choose "repair" in the PC Compagnon. I never could find "repair" in the SEUS
christophermaisch said:
Good luck!!
Click to expand...
Click to collapse
thanks
According to the sony forum it seems I'm not the only one without repair option on SEUS and having "there is no software available for your phone yet, please try again later" on PC compagnon.
But non of the threads finish well...
I think Vodafone Australia didn't do their homework somehow... and Sony punishes their customers...
Read here
http://forum.xda-developers.com/showthread.php?t=1040149
Please use "Search" option, it's pretty nice one.
Regards,
D4.
D4rKn3sSyS said:
Read here
http://forum.xda-developers.com/showthread.php?t=1040149
Please use "Search" option, it's pretty nice one.
Regards,
D4.
Click to expand...
Click to collapse
I've spent hours using it... remember I have no phone anymore, it's a good motivation.
This whole thread that you link (thank you for trying) just say "launch SEUS". Basically, the first thing that I tried before writing here.
I though you use to have such problem and had your own way. But since the SEUS and PC Compagnon failed you seems as powerless as me
Even on the SE forum nobody know what to do when the "repair" is just not available.
There's a ROM for each provider, I guess Sony bugged on Vodafone Australia.
Then, Try this
http://forum.xda-developers.com/showthread.php?t=943643
If you can't fix your device with that thread, you should take it to Someone who knows how to do it, You can make more damage to your device, if you do something bad.
Hope it works for you.
Regards
D4rKn3sSyS said:
http://forum.xda-developers.com/showthread.php?t=943643
Click to expand...
Click to collapse
Thanks to this link I found a complete ROM from a UK X10 Mini.
Many thanks D4rKn3sSyS !!!!!! it's back to life
Phone came back to life after flashing stock SE rom using Flashtool. It's much better than SEUS
Related
I managed to root my mini pro. However, I tried to debrand it and the phone stopped functioning. The touchscreen will not respond (thus, it is stuck on the "Select language" page. I've noticed that the 2 big files in the Sony Update Service that was supposed to replaced, disappeared. Leading me to conclude that those files are deleted from the mini pro.
However, PC companion, PC suite does not seem to be able to fix/recognize the phone. I've spent over 4hrs searching and attempting to fix this to no avail. Please help.
Long shot here mate, but worth a try..
Hold Home key and the power key from a cold restart. See if it resets to default again..
Good luck I feel your pain!
redemption0327 said:
I managed to root my mini pro. However, I tried to debrand it and the phone stopped functioning. The touchscreen will not respond (thus, it is stuck on the "Select language" page. I've noticed that the 2 big files in the Sony Update Service that was supposed to replaced, disappeared. Leading me to conclude that those files are deleted from the mini pro.
However, PC companion, PC suite does not seem to be able to fix/recognize the phone. I've spent over 4hrs searching and attempting to fix this to no avail. Please help.
Click to expand...
Click to collapse
Try with "Update Service":you can download it from sony website...
Update Service will help, I also rooted my X10mini, after that I removed some apps and after reboot the device was frozen on bootanimation with no respond. I was recomended to use Update Service and it worked. It "reinstalled" whole device SW.
I had the same problem et I tried to solve it with SEUS but this software told me that my version is the last one and dont want to repare or install another one one my mini..(I can't see any button "repare" !)
Anyone have an idea ?
sorry for my poor english
Thanks for your suggestions. However, I managed to fix it using the Davinciteam software.
Well I guess that your solution is not free so if somebody found anything whcih could be usefull to me or anybody who can fall on this problem please tell us
bigbrother69 said:
Well I guess that your solution is not free so if somebody found anything whcih could be usefull to me or anybody who can fall on this problem please tell us
Click to expand...
Click to collapse
Without phone connected:
Open PC-Companion and press Start under Support zone. Then press start under Update (My version is Swedish so i am just guessing what yours might be.) You will get a small box where the options are Connect and Repair.
Try that.
No, I have an error like "sorry, we cant update your phone cant be recognized"
I already tried with software like omnius, seus, pc compagnon, sin reconstruction, an utility of root by Mogway where there is an button to repare some errors. Davinci software doesn't support x10 in the free version.
I'll go on to find a solution, tks for your help
bigbrother69 said:
No, I have an error like "sorry, we cant update your phone cant be recognized"
I already tried with software like omnius, seus, pc compagnon, sin reconstruction, an utility of root by Mogway where there is an button to repare some errors. Davinci software doesn't support x10 in the free version.
I'll go on to find a solution, tks for your help
Click to expand...
Click to collapse
But IS there a repairbutton ? I am wondering because otherwise you might not have the latest version of PC-Companion or something? Also , when doing repair i don't think it even checks what your phone is. You have to select it from a menu that pops up.
Yes, there is a button and i tried all the software in there last version.
When I press the button "repair", I see that the program load "update prtocol" or something like that (update service ?), then It's start the update and 2sec after an error appear in a box "We can't access to mobile phone" or smthg like that.
Apparently, no communication can be done in PC compagnon.
My drivers are ok, seus apparently recognize my phone (if he told me that I have the last version and tell me that he see my phone)
A little weird huh
Under pc compagnon there is a repare button yes.
The error appear to the point "update motor boot" (démarrage du moteur de mise à jour in french)
I dont find solution yet
redemption0327 said:
I managed to root my mini pro. However, I tried to debrand it and the phone stopped functioning. The touchscreen will not respond (thus, it is stuck on the "Select language" page. I've noticed that the 2 big files in the Sony Update Service that was supposed to replaced, disappeared. Leading me to conclude that those files are deleted from the mini pro.
However, PC companion, PC suite does not seem to be able to fix/recognize the phone. I've spent over 4hrs searching and attempting to fix this to no avail. Please help.
Click to expand...
Click to collapse
redemption0327 said:
Thanks for your suggestions. However, I managed to fix it using the Davinciteam software.
Click to expand...
Click to collapse
I also have some problem like you.. Can you give the explanation and tools (Davinciteam software) to fix it.. 'Cause i hopeless to fix it until i read this.
Use the latest Omnius, it supports x10 mini and mini pro flashing
oh sh... I paid to fix it and now there is a free solution, the world is really nasty
Well, if anyone can't fix it with Omnius, I can give some advice for DaVinci, but I really hope that I'll be the last one to use this soft (despite his efficacity).
I hope you unterstood me
what do u use to convert your firmware to work with omnius??
I have the same problem, stuck on "Sony Ericsson" screen at startup. I tried SEUS and PC Companion to no avail. How can I get Omnius, i cant seem to download it anywhere.
bingobadgo said:
I have the same problem, stuck on "Sony Ericsson" screen at startup. I tried SEUS and PC Companion to no avail. How can I get Omnius, i cant seem to download it anywhere.
Click to expand...
Click to collapse
http://rapidshare.com/files/413633738/Omnius_for_SE_v0.09.2518.zip.html
Make sure you register and enter your registration details into the app.
parksy152 said:
what do u use to convert your firmware to work with omnius??
Click to expand...
Click to collapse
You dont need to convert them..
Just zip up the following files for the App.zip and make sure the naming convention is as below:
crashlog_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
amss_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
fota0_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
fota1_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
kernel_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
cache_S1-SW-LIVE-3EDC-0001-S1-PARTITION-WITH-SPARE.sin
And the same again for the following files for the FSP.zip:
amss_fs_robyn_BC18_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
userdata_S1-SW-LIVE-3EDC-0001-S1-PARTITION-WITH-SPARE.sin
system_S1-SW-LIVE-3EDC-0001-S1-PARTITION-WITH-SPARE.sin
update.xml
simlock.ta
Or alternatively download the firmware from Omnius website.
MarylandCookie said:
http://rapidshare.com/files/413633738/Omnius_for_SE_v0.09.2518.zip.html
Make sure you register and enter your registration details into the app.
You dont need to convert them..
Just zip up the following files for the App.zip and make sure the naming convention is as below:
crashlog_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
amss_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
fota0_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
fota1_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
kernel_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
cache_S1-SW-LIVE-3EDC-0001-S1-PARTITION-WITH-SPARE.sin
And the same again for the following files for the FSP.zip:
amss_fs_robyn_BC18_S1-SW-LIVE-3EDC-0001-S1-PARTITION.sin
userdata_S1-SW-LIVE-3EDC-0001-S1-PARTITION-WITH-SPARE.sin
system_S1-SW-LIVE-3EDC-0001-S1-PARTITION-WITH-SPARE.sin
update.xml
simlock.ta
Or alternatively download the firmware from Omnius website.
Click to expand...
Click to collapse
On the Omnius site there are no flash files for the x10 mini pro U20i only the mini E10i. Do you know anywhere I can get the U20i generic uk software to flash my phone using omnius.
zodiac100 said:
On the Omnius site there are no flash files for the x10 mini pro U20i only the mini E10i. Do you know anywhere I can get the U20i generic uk software to flash my phone using omnius.
Click to expand...
Click to collapse
They do have them, you have to register for access to downloads and activate your account. I have just checked
I have tried to install 1.6 over 2.1 like in the instructions from x10 blog but something went wrong and now my phone wont turn on. The screen just lights up but nothig appears. Please help me fix it
soldiers33 said:
I have tried to install 1.6 over 2.1 like in the instructions from x10 blog but something went wrong and now my phone wont turn on. The screen just lights up but nothig appears. Please help me fix it
Click to expand...
Click to collapse
Repair using SEUS.
it wont work. just says I already have latest software
Even if you have "the lastest software installed" you can reinstall it.
soldiers33 said:
I have tried to install 1.6 over 2.1 like in the instructions from x10 blog but something went wrong and now my phone wont turn on. The screen just lights up but nothig appears. Please help me fix it
Click to expand...
Click to collapse
The new flash tool 0.2.5, will flash both 1.6 and 2.1. It works a little different, you will need to read through 1st.
ive tried the new flash tool and the old. neither work. The old one flashes but same problem but new one wont even let me select the firmware to flash so i cant even try it out properly. and sues just lets me exit it doesnt let me repair like usual
soldiers33 said:
ive tried the new flash tool and the old. neither work. The old one flashes but same problem but new one wont even let me select the firmware to flash so i cant even try it out properly. and sues just lets me exit it doesnt let me repair like usual
Click to expand...
Click to collapse
1. Try PC companion.
2. Read this guide.
You need to create the ftf file from the sin files, under advanced see bundle creation.
Read the how to.
pc companion wont work as I need to have usb storage but my phone wont even turn on. I have created the ftf files and now flashing, hopefuly it works.
still the same . could it be that the cable got disconnected half way through the process? sorry i forgot to mention this. My brother pulled it out. am i doomed?
soldiers33 said:
still the same . could it be that the cable got disconnected half way through the process? sorry i forgot to mention this. My brother pulled it out. am i doomed?
Click to expand...
Click to collapse
No you are not doomed. Calm down
1. Repair using SEUS (even if it says you have the latest software, reinstall it)
2. If that does not work, try PC companion.
3. If that does not work then use the flash tool. You can use the old version if the new one is not working out for you.
Before you do all of the above, take out the battery and wait 10 seconds. Then, reinstall the battery and try the SEUS. Good luck!
the thing is sues wont letme repair it just says exit. Normally you can repair but now it just says exit.
soldiers33 said:
the thing is sues wont letme repair it just says exit. Normally you can repair but now it just says exit.
Click to expand...
Click to collapse
OK. Then try the older version of the flash tool. You can find it here.
Does it also say install? If so, press that button. If that doesn't work install PC Companion and try that method.
thank you very much everyone for the help. Its finally working. I used the flash unbrick and its fixed im so happy i thought that my money went down the drain.
soldiers33 said:
thank you very much everyone for the help. Its finally working. I used the flash unbrick and its fixed im so happy i thought that my money went down the drain.
Click to expand...
Click to collapse
Glad it's sorted out. Take deep breaths now and enjoy your phone!
I brick my phone x10 mini and it's now stuck in SE white written name. I searched in forum and I found few solutions. I try flash tool and we succeeded to re-flash , but still not working. There has been no change, the phone remains stuck . (sorry for my english , but I don't speak very good english)
TNX in advanced !
Install SEUS on your PC/Laptop.
Switch off your phone and hold the back key whilst you insert your usb cable, the SEUS should reckognise your phone after you have accepted their T&C's and ready to reflash... It should work..
Warning: You will lose all your data what is stored on your phone memory.
tnx very much. work perfect !
awpboss said:
tnx very much. work perfect !
Click to expand...
Click to collapse
A pleasure to have helped you out!
There needs to be someway this is reinforced to everyone - Brick = SEUS.
Praise the internets for giving us this community.
Seus lol so easy but asked so much SEUS lol
TimmyHate said:
There needs to be someway this is reinforced to everyone - Brick = SEUS.
Praise the internets for giving us this community.
Click to expand...
Click to collapse
sent from this midget x10 mini pro using cm7.2.3.3 14.5
Can you give me the link for downloading SEUS that support X10 mini
Hi im have the same problem
But when im follow the steps to flash mode SEUS tellme its the latest version already in your Phone, and continue stuck in SE white logo
Please helpme to reflash if its posible im can go directly for gingerbread? 2.3.5 CM?
Thanks
sectorzero said:
Hi im have the same problem
But when im follow the steps to flash mode SEUS tellme its the latest version already in your Phone, and continue stuck in SE white logo
Please helpme to reflash if its posible im can go directly for gingerbread? 2.3.5 CM?
Thanks
Click to expand...
Click to collapse
Even with "ur phone is up to date" you r able to click on Repair button, that solves all your problems.
NOOB question!
albanezi said:
Install SEUS on your PC/Laptop.
Switch off your phone and hold the back key whilst you insert your usb cable, the SEUS should reckognise your phone after you have accepted their T&C's and ready to reflash... It should work..
Warning: You will lose all your data what is stored on your phone memory.
Click to expand...
Click to collapse
I guess I'm a total noob here, but how do you turn the phone off when it's stuck on the SE logo screen? I mean pressing and holding the power button doesn't do anything....
velo25 said:
I guess I'm a total noob here, but how do you turn the phone off when it's stuck on the SE logo screen? I mean pressing and holding the power button doesn't do anything....
Click to expand...
Click to collapse
Taking out the battery will put it off
In defense of the noobs around here i can't find the repair button n'or does SEUS give me the Install Anyway option. Have the latest SEUS and now i'm trying an older one hope it works, but for precaution can anybody post a link to an alternative flashing tool ? Much appreciated.
Hi! I have no idea now what to do, so I decided to ask here. I'm already very depressed because I can not find a complete solution
When I installed the CyanogenMod 7 phone will not boot. Is suspended at startup (logo CyanogenMod) and nothing more I can do I have read many manuals, but none has not helped me. Apparently you need to do recovery (?), But when I try to run this menu, nothing happens and the system tries to run. At first I thought it was enough to wait, but even after several hours, nothing moved, and the phone became useless Can I do something about it? Is there anyone here who can I explain it as simply? And please do not refer me to other instructions, because it can not much.
It would be good if the aid was in the Polish language, but of course also happy to get help in English
neXt___ said:
Hi! I have no idea now what to do, so I decided to ask here. I'm already very depressed because I can not find a complete solution
When I installed the CyanogenMod 7 phone will not boot. Is suspended at startup (logo CyanogenMod) and nothing more I can do I have read many manuals, but none has not helped me. Apparently you need to do recovery (?), But when I try to run this menu, nothing happens and the system tries to run. At first I thought it was enough to wait, but even after several hours, nothing moved, and the phone became useless Can I do something about it? Is there anyone here who can I explain it as simply? And please do not refer me to other instructions, because it can not much.
It would be good if the aid was in the Polish language, but of course also happy to get help in English
Click to expand...
Click to collapse
first of all,
which phone do you have ? (mini or minipro ? )
which rom did you flashed?
which kernel are you using?
then, i'll see if i can help you
PS : dev forum isn't the right place to ask...
post in the "Q&A" forum from now on, pleaseeeeeee
buddy, please post these questions in the Q&A forum....you are spamming the development thread.
as of your problem, u can do two things,
a) use SEUS and reinstall 2.1update 1 from SE (click support zone, click phone software update and then click "repair phone" and re-root your cell from start
b)use the x10 flasher tool from xda,download the E10i_2.1.1.A.O.6_Generic.zip from the net, extract contents and copy them to the firmware folder of the x10 flashing tool....connect your phone in flash mode when asked and your done
gimme a Thanks if this helps you
achyut said:
buddy, please post these questions in the Q&A forum....you are spamming the development thread.
as of your problem, u can do two things,
a) use SEUS and reinstall 2.1update 1 from SE (click support zone, click phone software update and then click "repair phone" and re-root your cell from start
b)use the x10 flasher tool from xda,download the E10i_2.1.1.A.O.6_Generic.zip from the net, extract contents and copy them to the firmware folder of the x10 flashing tool....connect your phone in flash mode when asked and your done
gimme a Thanks if this helps you
Click to expand...
Click to collapse
....
if he just tried to flash miniCM7-2.1.1 with a stock kernel he just needs to unlock his bootloader, and then flash nAa's kernel and then reflash (no need to start from SEUS many problems can be solved without SEUS)
I'm sorry, probably not I noticed a good place to put questions :/
I have x10 mini pro
Cyanogenmod 7(?) I'm very noob in this topic.
Just as in the above question ^ ^
@achyut
SEUS does not work, I can not connect the phone with him
neXt___ said:
I'm sorry, probably not I noticed a good place to put questions :/
Click to expand...
Click to collapse
here you are in the MINI dev thread... not PRO.
the Q&A for both phones is here
so wrong place, wrong phone
...
could you to link the rom you are using?
You' ve probably flashed the 7.1.0/7.1.1 without follow all the required steps... I agree with friend that told you to unlock the boot loader, then install nobody'satall custom kernel and then reflash the rom! Also once i had the same problem... It caused because i didn't have made wipe/factory data reset! i pressed the power off button and the central key together in order to stop looping and reboot the phone...
I have to wait until someone moves on, or start a new topic in the right place? Once again, sorry
Probably the "use" the latest version of CyanogenMod. CM v10.
What should I do?
neXt___ said:
I'm sorry, probably not I noticed a good place to put questions :/
I have x10 mini pro
Cyanogenmod 7(?) I'm very noob in this topic.
Just as in the above question ^ ^
@achyut
SEUS does not work, I can not connect the phone with him
Click to expand...
Click to collapse
first , take out the battery . Then plug it back . open SEUS and choose mini pro .
after than press the back button and plug usb into ur phone . ( don power on ur phone in the process and don release the back button before SEUS telling u so ) .
after ur phone is detected juz install the stock 2.1 rom .
I need to flash my X10 Mini, but I can't find the firmware for It anywhere with a working link. Anyone that still have the file and willing to share?
There are only plenty of links to sites that are down
I tried to install MiniCM7-2.1.9-robyn on the phone and then afterwards it just won't start anymore, so i need to flash it and then use SEUS to restore it.
UPDATE!
I found everything and fixed everything I needed by just flashing It with a stock kernel.
Just use the Repair option in Pc Companion.
Here
leajian said:
Just use the Repair option in Pc Companion.
Click to expand...
Click to collapse
wont work because I can't even get into the menus, I turn it on and It gets stuck on a screen with little backlight, but no SE logo
TrissyGE said:
Here
Click to expand...
Click to collapse
I'm not looking for how to do It..... Read the question before you post. I appreciate you trying to help, but at least understand what the question Is first.
I'm looking for the firmware for the flashtool so I can flash my device (.ftf file)
They guides that teaches you how to fix a bricked phone got links to megaupload (that got shutdown not long ago) and multiupload (also got shutdown) for the firmware I'm looking for.
If you can't turn the phone on, then flashtool won't help you. You have to able to turn the phone on to get to download mode for flashtool, or Pc Companion, or SEUS to do their thing.
If your phone doesn't turn on, you've got a hard brick. Which is bad.
Sent from my U20i using xda premium
Ticklefish said:
If you can't turn the phone on, then flashtool won't help you. You have to able to turn the phone on to get to download mode for flashtool, or Pc Companion, or SEUS to do their thing.
If your phone doesn't turn on, you've got a hard brick. Which is bad.
Sent from my U20i using xda premium
Click to expand...
Click to collapse
No, it can be a hard brick, he didn't do anything to put his device in danger (from what he claims).
He just needs a stock .ftf file for mini, which I was planning to do in the past, but did only for the pro... I am sorry my friend... There is only one solution -to make the ftf file yourself, which is something very confusing and you are going to need another mini to do this. But don't get your hopes down, it is possible, at least...
leajian said:
No, it can be a hard brick, he didn't do anything to put his device in danger (from what he claims).
He just needs a stock .ftf file for mini, which I was planning to do in the past, but did only for the pro... I am sorry my friend... There is only one solution -to make the ftf file yourself, which is something very confusing and you are going to need another mini to do this. But don't get your hopes down, it is possible, at least...
Click to expand...
Click to collapse
The phone it self comes to a point where there is some light on the screen, but i can't see the SE Logo anymore. I can charge the phone without problem from what it looks.
If I can get hold of another mini how can I make the ftf?
What did I do to achive this problem??
I tried to install MiniCM7-2.1.9-robyn and it ended with a phone that got stuck during boot. Then I got to a guide where someone said "Hardreset the device and use SEUS", but SEUS always says that my phone has the latest software.
TazBaz said:
The phone it self comes to a point where there is some light on the screen, but i can't see the SE Logo anymore. I can charge the phone without problem from what it looks.
If I can get hold of another mini how can I make the ftf?
What did I do to achive this problem??
I tried to install MiniCM7-2.1.9-robyn and it ended with a phone that got stuck during boot. Then I got to a guide where someone said "Hardreset the device and use SEUS", but SEUS always says that my phone has the latest software.
Click to expand...
Click to collapse
As far as SEUS is concerned, you DO have the latest software. It just doesn't realise that what you have doesn't work. Select the option to reinstall the software.
Sent from my U20i using xda premium
Ticklefish said:
As far as SEUS is concerned, you DO have the latest software. It just doesn't realise that what you have doesn't work. Select the option to reinstall the software.
Sent from my U20i using xda premium
Click to expand...
Click to collapse
Only one problem here, I don't have the option to reinstall the software at all after it says that I already have the latest software.
Can it be that the option is no longer there depending on SEUS version?
TazBaz said:
Only one problem here, I don't have the option to reinstall the software at all after it says that I already have the latest software.
Can it be that the option is no longer there depending on SEUS version?
Click to expand...
Click to collapse
There is a repair option in PC Companion, see it, please! The repair option on PC Companion is Support Zone --> Update --> Repair.
BTW, to hard reset :
1. Turn the phone off
2. Press the POWER button
3. Press and hold home key aprox 3 seconds
4. The hard reset is starting.
Hello there!!! I had the same problem just yesterday and I was about to get crazy in order to solve it...and then I found this post which was definately useful!!!! Just follow every single step and it will get back to work...btw I still can't flash the nAa-11 kernel with flashtool...it keeps on saying error and the flashing doesn't work
http://forum.xda-developers.com/showpost.php?p=20251565&postcount=8
leajian said:
There is a repair option in PC Companion, see it, please! The repair option on PC Companion is Support Zone --> Update --> Repair.
BTW, to hard reset :
1. Turn the phone off
2. Press the POWER button
3. Press and hold home key aprox 3 seconds
4. The hard reset is starting.
Click to expand...
Click to collapse
I will try that thanks, but you need to hard reset before the repair with PC Companion?
I managed to find the stock kernel so now I'm starting the device, but I get a SE logo and then It shuts off.
One problem when I try to repair on step 2 (prepare step) I get a error unable to start or phone update update components. (the pc companions is installed with the newest version)