[Q] Pc companion/update service for flashing? - XPERIA X10 Q&A, Help & Troubleshooting

do you need these programs before flashing for the first time cause i haven't been able to flash and i have been trying to for a couple days. p.s i live in the U.s

Yes,because i believe they install the drivers needed on your computer.
Sent from my X10a using XDA App

Better to have them to have the USB drivers installed.

Yes!
Not wise to use any other driver to flash your x10 besides the one that comes with PC companion, which by the way needs to be started and the phone must be connected to the computer at least once to be able to flash it, else you may end up with a broken driver that will a pain to remove/correct.

Related

[Q] I killed my phone!

After trying the azzuzu root method for fw2.3.3, I have royaly efed my phone up.
My phone is not recognized by the computer. After being on 2.3.3 it reverted me back to 2.1. Everytime I plug it up it tries to install drivers but then it says unrecognized device. It has done this on my PC and my girlfriends PC. I have tried PC companion, and flash tool and niether one of them recognize my phone! So I'm stuck with an unrooted x10i .435. Please someone help me!
vpllover said:
After trying the azzuzu root method for fw2.3.3, I have royaly efed my phone up.
My phone is not recognized by the computer. After being on 2.3.3 it reverted me back to 2.1. Everytime I plug it up it tries to install drivers but then it says unrecognized device. It has done this on my PC and my girlfriends PC. I have tried PC companion, and flash tool and niether one of them recognize my phone! So I'm stuck with an unrooted x10i .435. Please someone help me!
Click to expand...
Click to collapse
Reinstall the sony software?
Install latest SE adb driver for x10.
Sent from my X10i using XDA App
OP is a murderer.
sent from my stock gb not rooted and no add ons.
I've uninstalled, pc companion, seus, anything related 2 the phone, drivers u name it! I uninstall, restart pc, reinstall, and get the same unrecognized device error! Seems like the drivers that the phone is installing is ever up
Sent from my X10i using XDA Premium App
@OP
in short u are f****d.!
try rooting it with super one click or zroot(somethinng like that).
Yo.. let me explain something.
When i rooted and downgraded the kernel it used the old ADB drivers.
When i upgraded it required the new ADB drivers.
Maybe that is your issue.
flash the generic SE firmware with flashTool. It should work...
turn off phone - take out battery - press back key - insert usb - insert battery.
That should do the trick. Then Flashtool to stock
I probably have used this method 50 times the past 2 days trying to upgrade to GB. Always flashes ok but phone wont boot. Finally gave up and stayed with 2.1 and upgraded to MIUI. So it aint dead yet, just injured LOL
2 different computers won't recognize the phone, I can't flash with flashtool! It goes into flag mode but flashtooldoesnt recognize the phone. Somebody know how to manually install drivers?
Sent from my X10i using XDA Premium App
similar issue
i have a somewhat similar problem...i used azzuzu's method to downgrade the kernel for rooting..as it was said the phone got stuck on the sony ericsson logo and i tried to connect it according to the steps..but flashtool isnt recognising my phone anymore and busybox isnt being installed..now my phone never starts up and is always stuck at the sony ericsson logo..plz someone help sorry for posting this in your thread , feeling pretty helpless right now
Upload some pictures.

[BRICK][BOUNTY] Help me unbrick my X10a!

So apparently no one on here wants to help me unbrick my X10a for free so now I am going to offer money, no specific dollar amount until someone can get it working again, even if it's only for a short period of time. The link to my original thread is linked above, whoever gets it working can request the amount they think it was worth spending their time. Good luck, for both of us. I have seen several others with this same problem, if they would like to join in the bounty for us, and future bricks, feel free to leave a post of PM me.
I only skimmed over your last thread so let me ask a few questions.
Flashtool doesn't work at all?
So what version flashtool do you have and has it worked previously?
Did you unlock your bootloader?
When you connect to flashtool do you keep the back button held the WHOLE time?
EDIT:
Read your thread. Looking at the flashtool screenshot it looks very similar to an error i was having at one point. Even tough i had the drivers installed they didn't want to play nice. I downloaded Flashtool 0.2.9.1 and reinstalled drivers. When in flash mode i seemed to HAVE to hold the back button down the whole time.
I have tried it both ways, to hold it the entire time, or until I get the error, and let go as soon as it starts flashing. Both have the same end result of the aborting of the flash. Also, I've uninstalled and reinstalled the drivers several times as well as used Gordon's reset usb ids everytime I try.
Dacian said:
I have tried it both ways, to hold it the entire time, or until I get the error, and let go as soon as it starts flashing. Both have the same end result of the aborting of the flash. Also, I've uninstalled and reinstalled the drivers several times as well as used Gordon's reset usb ids everytime I try.
Click to expand...
Click to collapse
Are you sure you have a stable connection with your data cable?!! (USB port and cable work fine, not lose or something!!)
Question: The Green Led (the light that comes "on" while you're in flash mode) goes off while you are flashing?
Sorry all, lost my isp for a bit. Yeah, I'm sure about the USB connection. I have gone as far as to taping it down to make sure it doesn't move. lol. And when flashing, the light does stay on but there have been times where the light goes off half way through despite not being moved since it initialized connection.
What where you running?? Did you try seus???
Sent from my Lauda X10a using XDA App
Okay i had your error message too a few times here is what i did i re installed the x10 drivers it was included in flashtool then i flashed stock 2.1 it worked like a charm !
Sent from my X10i using XDA Premium App
Try this:
1- uninstall pcc and seus
2- run some aplication to clean the registry of the computer.
3- install again pcc and seus
4- connect your phone and let PC to install the drivers automatically.
5- use flashtool to flash a firmware designed for you baseband. Try android 2.1 first to test it.
If it still doesn't work try to do all in a computer with another windows version. Sometimes Windows 7 give a little problem to install drivers.
One computer that has never been used for this is excellent because there is no conflicts between applications and drivers
Sent from my X10a using XDA App
Ensure firewall and antivirus disabled on pc .
Kieron
Sent from my X10_AOSP using xda premium
kieronw3 said:
Ensure firewall and antivirus disabled on pc .
Kieron
Sent from my X10_AOSP using xda premium
Click to expand...
Click to collapse
Also turn off UAC (user access control).
Don't know if this will help too but have the latest version of Java installed.
Similar problem
So did your X10 work?
I am having the following problem:
Mistakenly wiped everything using xrecovery, even system.
Now no computer recognizes device (10 different systems with XP, Vista, 7)
unable to boot into flash, stuck at SE logo,
already tried different versions of flashtool, tried all the drivers including gordon gate, android drivers, pcc and seus but device still not recognized
Now is my X10 bricked or what!
Any hope anybody?
phillip.in said:
So did your X10 work?
I am having the following problem:
Mistakenly wiped everything using xrecovery, even system.
Now no computer recognizes device (10 different systems with XP, Vista, 7)
unable to boot into flash, stuck at SE logo,
already tried different versions of flashtool, tried all the drivers including gordon gate, android drivers, pcc and seus but device still not recognized
Now is my X10 bricked or what!
Any hope anybody?
Click to expand...
Click to collapse
Reinstall Windows and then:
1. Download the latest PC Companion from SE site.
2. Install it on your PC then open the programm and choose the "update service" there.
3. Then you'll find there a phrase saying "repair phone".
4. Then only follow the instructions of PC Companion to repair your phone.
And ALWAYS, ALWAYS, ALWAYS read FAQs, Guides, and Tutorials.
Format PC and install SEUS and PC Comp....
Disable UAC in windows 7
Restart PC
Follow procedure for flashing,with Flashtool 0.2.9.1...
Wait for drivers to be installed (must have internet connection)
Use Stock 2.1 Firmware file first!
Run it As Administrator
Change USB Cable, take shorter one and plug in in the back of PC (directly on motherboard)...
I had already tried pcc but I tried again as you said.
Formatted new PC with windows 7, turned UAC off.
Downloaded new pcc and ran the program.
After hitting the update link it says to connect the usb cable but after connecting usb cable it does not install the drivers. It says to disconnect and reconnect if nothing happens for 30 seconds so I did that and upon connecting usb cable it says unable to connect to the phone. I think the phone repair link is after the phone is connected to pcc but I can't connect to pcc.
And how do I connect the usb cable directly to the motherboard? Do you mean to open my desktop cabinet and locate the usb port on the motherboard, disconnect the already connected back and frontpanel usb headers and then connect the usb cable to the usb header on the motherboard?
Also tried flashtool 0.2.9.1 but no success, keeps trying to connect but to no avail.
I tried SEUS awhile ago, it's in the original post. I have uninstalled the drivers and reinstalled them several times as well as uninstalling Windows drivers and only using Gordon's drivers and that did not work. I taped the back button down on the device but that still did not work. I'm at a loss...
About installing the drivers, how about this:
Download the standalone drivers: http://www.megaupload.com/?d=U2PY6QOR and read these instructions provided from SE Support:
First, it is important to install drivers properly.
Start with the SEMC drivers.
When X10 is connected to the computer you should use ADB for X10 not ADB that comes with Googles SDK since it is not compatible with X10, yet. Use ADB for X10 included in attatchment, and write adb devices.
If you get something like CBxxxxxxxx then ADB works with X10. To kill old ADB server you can use adb kill-server command.
Good luck
(Note: i found this info over the net, it's kinda old, May 2010 but may works, who knows!)
Another option to install the drivers is to download and install this software: http://www.mediafire.com/?pq0idzzyasmzui0 This is the Unlock Software provided from cellunlocker.net which i used to unlock my X10, it has the option to install the drivers for you on the software folders (in windows start menu).
Try again after installing these, specially the second option (Unlock Client), who knows, maybe you'll get lucky!
Hope this helps!
How bout this. Start fresh from another PC.
Sent from my Sensation using xda premium
I have updated everything, I have actually started fresh from my Laptop to see if it had something to do with my home PC but it does the same thing. As far as ADB goes, you cannot access ADB if the phone is net set to debugging mode, adb will not recognize the phone, even in flash mode.
Will you can try this it has worked for a few others and if it does work JUST the thanks button is good for me. And just Be Patient go slow and it will get fixed if it's not already. And after you get it working then you can update too what ever Rom you wont.
Have Fun
http://forum.xda-developers.com/showthread.php?p=13163598#post13163598
---------- Post added at 01:41 AM ---------- Previous post was at 01:10 AM ----------
Patricks_book said:
Will you can try this it has worked for a few others and if it does work JUST the thanks button is good for me. And just Be Patient go slow and it will get fixed if it's not already. And after you get it working then you can update too what ever Rom you wont.
Have Fun
http://forum.xda-developers.com/showthread.php?p=13163598#post13163598
Click to expand...
Click to collapse
Also when you've got that fix you can update an root 2.3.3 Stock rom here:
I used Z's way:
http://forum.xda-developers.com/showthread.php?t=1196421
Or you can use Doomlords way:
http://forum.xda-developers.com/showthread.php?t=1196808
Also baba_baba has a real good tread here:
http://forum.xda-developers.com/showthread.php?t=1209749
And please remember too Thank these Developers for their work with the THANKS button

LGE Drivers

Anyone have a solution for the ever recurring FOUND NEW HARDWARE?
I'm using windows vista.
already installed drivers for lgp500 but every time i connect the device via usb. my pc wont recognize it. and wont even automatically find the drivers even though i already install all the drivers needed.
Any workarounds?
* I want to change my base band but lgeblahblah wont seem to detect it.
help pls. i want to change my baseband but my pc wont recognize my phone
i had to re-install the lg drivers twice before it started working
one time my sdcard went bad
i assume you have usb debugging turned ON and are hitting "usb connect" when the drivers have updated the phone.
I went with Andy's phoenix rom, he coded in his rom modifications to fix that. Of course Bluetooth still is not working however I use earphones with mic integrated.
Sent from my LG-P500 using Much Love
if problem is still alive ...
Don't know if you've tried this, but if not:
1.) get LG PC Suite IV for P500, and install it.
2.) connect your phone to PC, and wait
3.) if LGE Modem installed, go to Device Manager, and set it to tilted or disabled.
( sorry, i'm hungarian, and using hungarian windows too, don't know how this option called on english or other language )
After that, if no other drivers was installed for your phone, should be detected, and installed now. Anyway when you update or downgrade firmware using kdz method, flashing will not start until you disable lge modem in device manager, and you will get only errors, so maybe it will help with installing drivers too. Method tried with GW620, GT540 (my last two phones) and P500 too.
I had issues with these drivers the first time I tried using them. I suggest going to LG Mobile Support, getting their software program, it will ask for your phone model and download all the necessary drivers. Don't have your phone connected, it tends to want to upgrade to the LG's latest ROM.

Kies problem

I downloaded kies of samsung website connected my phone up by usb very easy but recently there has been a update on kies and now i have a problem connecting my phone upto kies or when it does connect its hard to keep the connection between the phone and computer.. I have reinstalled the drivers and everything like it says in troubleshoot but dont know what my next step is.. If anyone can help that wud be great
Sent from my GT-I9100 using xda premium
SteveO588 said:
I downloaded kies of samsung website connected my phone up by usb very easy but recently there has been a update on kies and now i have a problem connecting my phone upto kies or when it does connect its hard to keep the connection between the phone and computer.. I have reinstalled the drivers and everything like it says in troubleshoot but dont know what my next step is.. If anyone can help that wud be great
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Does your phone connect normally via USB to the computer ? completely uninstall and re-install via a fresh download of KIES. Clear your Temp, %Temp% and prefetch folders. Check if the cable is faulty or not. One of these is bound to help you.
I have tried reinstalling keis and done everything i can think of but nothing seems to help. Before the update of kies my phone used to be able to connect via usb like normal ever since the update its all gone to pot
Sent from my GT-I9100 using xda premium
First of all, I must say that KIES is one of the worst pieces of software I have ever seen. It is buggy and you must hope it will work eventually.
I got one successful with my old phone (galaxy 551) after updating via ODIN first to the correct firmware for my country.
But with my current Galaxy S2 I had to go to the repair center who used ODIN to get the right version on my phone.
I now have made KIES work on my windows 7 machine. I had to install the UK version (not the country version) and used the connection problem wizard to reinstall the drivers. Now it says I have the current version of my firmware.
To go back to your problem. It would help if you post which OS you are on and which version of the firmware you have currently installed ?
Also have you USB error detection off in the settings of your Galaxy S2 ?

[Q] USB device not recognised

When I plugin my Lumia 920 to a Win8 64bit PC I get an error 'USB device not recognised'. I've tried the following but with no luck:
- Changed the USB cable
- Tried a different USB port including one on the back
- Used a different PC (Win8 32bit & OSX on a MBP)
- Restarted the phone whilst connected
- Checked for Updates with the phone connected (both on phone and PC)
- Removed the 'Upperfilters' registry entry
- Installed the Windows Phone 8 app (both desktop and metro)
- Installed the Nokia PC Suite
- Reinstalled Windows
- Reset the phone (Factory restore)
The phone seems to charge ok via USB but never connects. It doesn't even appear in Device Manager so there's no drivers for me to remove and/or update. The EventLog says 'PnPDriverNotFound'. Anyone got an idea of what could be wrong?
@MrJamesMoore
Is your phone a true Lumia in the respect that it has a factory ROM and is not a developer model or other? Sounds to me like the PC is not able to identify the phone as a Lumia and does not know what it actually is and therefore does not know what driver to load for it.
Hmmm, this is interesting...
U might want to try installing Nokia Care Suit. After instllation complete go to the installation folder, and head to the Drivers directory. U have several drivers there, install everything, and then try to connect it.
Solarenemy68 said:
Is your phone a true Lumia in the respect that it has a factory ROM and is not a developer model or other? Sounds to me like the PC is not able to identify the phone as a Lumia and does not know what it actually is and therefore does not know what driver to load for it.
Click to expand...
Click to collapse
Yes that's what I was thinking. It was a promotional phone so maybe it's not a factory ROM? Is there a way to check? I guess more importantly, is there a way to install a factory ROM on it? I'm located in Australia if that matters. Everything else about the phone works great but not being able to transfer my full res videos off it is a pain.
Thanks for the reply!
@MrJamesMoore
miodrage said:
Hmmm, this is interesting...
U might want to try installing Nokia Care Suit. After instllation complete go to the installation folder, and head to the Drivers directory. U have several drivers there, install everything, and then try to connect it.
Click to expand...
Click to collapse
That didn't work either but thanks for the suggestion. Even with all the drivers installed the PC (and Care Suite) still can't see the phone; still get the USB not recognised error
Without being able to connect in anyway I guess it's impossible to flash the phone any put another ROM on?
Hmmpfff...
It is not a developer phone because they didn't have GSM radio in them, WiFi only. So that is out of the question.
I have one more suggestion, and if that fails, I would suggest u go to Nokia directly and ask what to do, maybe even a replacement.
So, try to find some1 with Win7 on his/her PC, and try to connect the phone. If that goes as it should,u can install win7 on ur PC and have a dual boot machine.
To check the info about ur phone u would have to connect it to Nokia Care Suit, however, that is not an option ATM.

Categories

Resources