hey guys i got myselft a tg01, but i get this error trying to flash it.
Ive tried both the SDDL+ and the short pin method to no avail.
i created a folder named PRG and it didnt workd then i created one mamed prg and still no go...
ive used 2 roms:
TG01WP_00_miROM4 ENGL WM Titanium
TG01WP_00_miROM4 ENG CleanRom RetroClassic
they both give me the error in the title, trying to flash an official english rom downloaded from toshiba website i get this error:
"SD downloading failed variant is invalid"
my ratio version is 5001.0102.57 and this phone is a german 02 phone, but simlock free...
please help me get around this one...
regards!
Hello,
Test with just the name "TG01WP_00.tsw" (no space, etc ...) with SDDL+ .
Sorry for my bad english
EVEALEX62 said:
Hello,
Test with just the name "TG01WP_00.tsw" (no space, etc ...) with SDDL+ .
Sorry for my bad english
Click to expand...
Click to collapse
hey!
already did, but ill try again, also i used 2 SD cards just in case...
btw your English is quite good actually...
EDIT: did not work, same error
and if you remane to "TG01WP_00.enc" for shortPin méthod ?
It's place like that at the root of the SD Card ?
SD\PRG\TG01WP_00.tsw
SD\SDDL+
yah i already did that but ill try again via SDDl+ and short pin, just a sec
Edit:
no good, same error...
Edit:
managed to update to 6.5 via the toshiba website my radio is now 5001.0102.76, had to choose german language or i got the variant error, but my goal is to leave the German rom..
can anyone help me?
Edit:
Problem solved, to use cooked roms i had to update to 6.5....
SD Downloading failed
Variation is invalid
the same problem with both solutions, please i need help.
what rom are you flashing FROM and what rom are you flashing TO ?
i think i can help you
Hi there,
I am new here and realize I first have to search the forum for the problem i encounter , I did that, could not find the exact problem.
One mentioned slow copying but it was resolved after someone advised him to use a 2.0 usb port.
But that's not the issue in my case
I installed latest paranoid android rom as the second rom in the dualboot option from siyah kernel.
I followed all the instructions to install it correctly.
When i connect phone to pc to copy file the pc hangs, that means, the program which is doing the copying hangs, (both total commander as well as windows file explorer) have to close it with task manager, then when I browse the phone I see the file i tried to copy is present with the original size, but its corrupted, its only size being reserved for the file.
It is not an usb port problem, because when i boot the phone to my first rom (simplistic disaster) i can copy files to the phone, and its fast.
anyone have this problem or know a solution i would be be grateful, because I like the rom, but if I cannot copy files to it it goes down the trunk.
yours sincerely
Ronald
Put out your microsd and connect it directly to pc, works fine? If not it's card issue. Format could help in this case.
Sent from my Sgs2 via Xda Premium. Helped? Click thanks button!
why do i have to retype the title?
socah said:
Put out your microsd and connect it directly to pc, works fine? If not it's card issue. Format could help in this case.
Sent from my Sgs2 via Xda Premium. Helped? Click thanks button!
Click to expand...
Click to collapse
Thanks for your response, I did not try that before allthough im pretty sure its not the solution, because if it were the case i would have the same problem with the other rom booted.
But to not make a fool out of myself i tried it anyway s, and like i anticipated: no problems with the sdcard, the problem also occurs when i copy to the internal sd card, so its most likely some combination of the paranoid android rom with other issues .
Hard to say anything wise... I would try to find answer in rom specific thread. Hope you will solve it. Good luck!
Sent from my Sgs2 via Xda Premium. Helped? Click thanks button!
socah said:
Hard to say anything wise... I would try to find answer in rom specific thread. Hope you will solve it. Good luck!
Sent from my Sgs2 via Xda Premium. Helped? Click thanks button!
Click to expand...
Click to collapse
Yeah, thats where I initially tried to ask the question, but since i am a newbie im am not allowed to post a question in a developper thread till i reach 10 posts , some weird rule
oldevil666 said:
Yeah, thats where I initially tried to ask the question, but since i am a newbie im am not allowed to post a question in a developper thread till i reach 10 posts , some weird rule
Click to expand...
Click to collapse
He said nothing of posting in the thread. He said you should try to find the answer in that thread.
The 10 post rule is there to (hopefully) prevent people from posting random threads in development fora. Doesn't seem to help much though.
Hello
First, excuse for my english. I'm french, and like you know, we are the worst of the world in foreign language (thanks google Trad).
Two, thanks to this ROM, she's great, the best Rom i test since i've my SGII.
So, I'm here because i've a problem (surprised?). When i copy my music Folder (4,5Go), I've a first error message who tell that a sing have a wrong format (MP3). It's not really a problem, because I can ignore it and let the copy continue. But after that, I've a second error message for another file. This time, the message tell me that the phone not respond (sorry, I try to translate Win7, in french: "le périphérique ne répond plus") and i have to stop all the copy or ignore this file. If I ignore, I've the same problem for the following files, and all my folders are empty.
This problem appear with or not the debug mode.
Can you help me? Sorry if the question have been already ask, i've search all this afternoon (I live in Reunion Island, actually it's 5:00pm) and i don't find any answer.
Thanks a lot.
Schmeu
Schmeu said:
Hello
First, excuse for my english. I'm french, and like you know, we are the worst of the world in foreign language (thanks google Trad).
Two, thanks to this ROM, she's great, the best Rom i test since i've my SGII.
So, I'm here because i've a problem (surprised?). When i copy my music Folder (4,5Go), I've a first error message who tell that a sing have a wrong format (MP3). It's not really a problem, because I can ignore it and let the copy continue. But after that, I've a second error message for another file. This time, the message tell me that the phone not respond (sorry, I try to translate Win7, in french: "le périphérique ne répond plus") and i have to stop all the copy or ignore this file. If I ignore, I've the same problem for the following files, and all my folders are empty.
This problem appear with or not the debug mode.
Can you help me? Sorry if the question have been already ask, i've search all this afternoon (I live in Reunion Island, actually it's 5:00pm) and i don't find any answer.
Thanks a lot.
Schmeu
Click to expand...
Click to collapse
The problem you're having is normal at least for now, and I've experienced it many times.
These are my observations and how I've solved the issue in different occasions:
Observations:
- this issue occur randomly
- it's more common if your computer has been hibernated too many times without rebooting
- it's also common if an app on your phone is also trying to access your storage simultaneously.
Solutions:
- stop the copying process, and reconnect your device to the pc.
- reboot your Pc
- copy your files via Wi-Fi using apps - reboot to recovery, connect your phone to your Pc and mount your device as usb (under mount option in recovery) and copy your files.
Note:
-The solutions listed above are not dependent on each other, and one of them will sure get the job done till mass storage mode is fixed in the Rom.
Swyped from my Samsung Galaxy SII
Thanks you very much. I try this tomorrow and i'll tell you if it's works :good:
Schmeu said:
Thanks you very much. I try this tomorrow and i'll tell you if it's works :good:
Click to expand...
Click to collapse
Ok.
Swyped from my Samsung Galaxy SII
Hello,
I try to connect my Gs this morning like you tell me. But it doesn't work.
Firts, i boot my PC after a good night. I re-boot my phone and after that i connect it to my PC.
The same error appear at the begining of the copy.
So, i try to mount my USB storage (i've no Wify to my job so i can't test this solution). The PC detect my phone (it was in the peripheral equipment, but the SD doesn't appear in the explorer.
I'll try to change the kernel, i would like to flash Siyah. If i'm lucky, maybe it will work. Which siyah's version is compatible with PARANOID. I maybe understand there a problem the beta6.
Schmeu said:
Hello,
I try to connect my Gs this morning like you tell me. But it doesn't work.
Firts, i boot my PC after a good night. I re-boot my phone and after that i connect it to my PC.
The same error appear at the begining of the copy.
So, i try to mount my USB storage (i've no Wify to my job so i can't test this solution). The PC detect my phone (it was in the peripheral equipment, but the SD doesn't appear in the explorer.
I'll try to change the kernel, i would like to flash Siyah. If i'm lucky, maybe it will work. Which siyah's version is compatible with PARANOID. I maybe understand there a problem the beta6.
Click to expand...
Click to collapse
Sorry for not clarifying the kernel part.
I use Siyah and mounting usb in recovery works perfectly well.
Siyah 3.5.2 and above are compatible but I always recommend 4.0.1
Swyped from my Samsung Galaxy SII
No problem, thanks you. i'll flash Syiah this week
At home, i try to transfert files with airdroid apk and it works but this soft not allow to transfert several selected files or folders.
Thanks you again for your help.
Hello,
Just to tell you about my problem. With Siyah I could copy all my folders in Recovery mode. I hope the problem will be resolverd with the next PA's version.
Thanks again.
Schmeu said:
Hello,
Just to tell you about my problem. With Siyah I could copy all my folders in Recovery mode. I hope the problem will be resolverd with the next PA's version.
Thanks again.
Click to expand...
Click to collapse
Visit the first link in my signature, let's continue discussions there so as to help others
Swyped from my Samsung Galaxy SII
Jokesy said:
The problem you're having is normal at least for now, and I've experienced it many times.
These are my observations and how I've solved the issue in different occasions:
Observations:
- this issue occur randomly
- it's more common if your computer has been hibernated too many times without rebooting
- it's also common if an app on your phone is also trying to access your storage simultaneously.
Solutions:
- stop the copying process, and reconnect your device to the pc.
- reboot your Pc
- copy your files via Wi-Fi using apps - reboot to recovery, connect your phone to your Pc and mount your device as usb (under mount option in recovery) and copy your files.
Note:
-The solutions listed above are not dependent on each other, and one of them will sure get the job done till mass storage mode is fixed in the Rom.
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
SO i read now its a common problem with the rom , i did not find that information yet, I now using the cynogenmod 9 from july because i was hoping to solve the mass storgage issue and guess what, the same problem, so now i know its not paranoid android related but a cynogen mod issue.
I actually have a new problem since i have a new adsl modem, cyanogen mod does not have a wps option to connect to a wifi router, the modem i have wont connect with any android device the regulary way by typing the wep password wich worked fine with other devices like ps3,TV and a laptop, we have 3 android devices (2x s2 and 1x 10.1 tablet) and all only can connect with the wps option wich unfortunally is missing in cyanogen mod
But I dont see this as a rom problem, only as a missing feature.
Hi All,
I have had a look around the net & forums but no joy.
I have an Archos 80 Cobalt (G9) and flashed Cynogen Mod 10.1 from XDA - the page address is
http://forum.xda-developers.com/showthread.php?t=2519781
Its the release from oma7144. since flashing this, i dont like it theres seems to be too many little things that bug me, cant play some games, battery indicator dosent work, to name a few.
Im trying to find out haow to flash the stock firmware back onto device and was wondering if anyone can help me?
I have downloaded the firmware direct from Archos but not sure how to flash it onto device, I have tried placing file into root of internal memory for auto detect but this dosen't work??
any help would be appericated
Regards
Richard
Archos 80 revert to stock firmware
hardingrj said:
Hi All,
I have had a look around the net & forums but no joy.
I have an Archos 80 Cobalt (G9) and flashed Cynogen Mod 10.1 from XDA - the page address is
http://forum.xda-developers.com/showthread.php?t=2519781
Its the release from oma7144. since flashing this, i dont like it theres seems to be too many little things that bug me, cant play some games, battery indicator dosent work, to name a few.
Im trying to find out haow to flash the stock firmware back onto device and was wondering if anyone can help me?
I have downloaded the firmware direct from Archos but not sure how to flash it onto device, I have tried placing file into root of internal memory for auto detect but this dosen't work??
any help would be appericated
Regards
Richard
Click to expand...
Click to collapse
Google is your friend:
a) You can visit the Archos Website, google Archos, then try the support pages which have instructions and link to flash image download: http://www.archos.com/gb/support/support_tech/updates_fwm.html
b) Better rom to use if you want like stock experience is here: http://www.arctablet.com/blog/forum...stom-firmware-with-root-from-update-20130329/ which is link to download kasty-cobalt80-40-20130202-rooted.zip containing all the files you need to flash a stock image with a few tweaks (Google Play, Screen flicker, YouTube and sleep issues fixed and it is rooted)
I'm trying to repair my touch screen of a tablet Yarvik TAB465EUK and I think I can get it with the "visturev3_compatibility_1.2.x.zip" file.
I searched by google and I have a lot of problems because it is a very old file.
Please, could someone send me this file?
Thank you so much for everything.
EmilioBcn said:
I'm trying to repair my touch screen of a tablet Yarvik TAB465EUK and I think I can get it with the "visturev3_compatibility_1.2.x.zip" file.
I searched by google and I have a lot of problems because it is a very old file.
Please, could someone send me this file?
Thank you so much for everything.
Click to expand...
Click to collapse
Bump. I have an old Allwinner a10 too. Tried caches of android file host and everything too. If someone has this ZIP lying in their PC's, it would be a huge deal. Could make this tablet into a google home or something.