hello, just installed this ROM and everything was fine, but want to use the camera found a bug, there is a continuous flashing, as if on and off the night mode, I hope you can correct, everything else is fine.
Greetings!
axyman said:
hello, just installed this ROM and everything was fine, but want to use the camera found a bug, there is a continuous flashing, as if on and off the night mode, I hope you can correct, everything else is fine.
Greetings!
Click to expand...
Click to collapse
estoy usando esta rom desde que aparecio y nunca he notado ese bug. La camara funciona perfecto para mi.
I'm using this rom since it appeared and I've never noticed this bug. The camera works great for me.
sera?
mmm... no se si sea un caso aislado, es como el bug con los botones de volumen al reproducir multimedia o juegos, en mi caso no se presenta en absoluto.
Probare con una ROM diferente, estoy penzando en Open Optimus, y si el bug persiste entonces sera problema de hardware.
Gracias por aportar tu experiencia
mmm ... if it is not an isolated case, is like the bug with the volume buttons when playing games or multimedia, in my case does not appear at all.
Proves another ROM, perhaps Open Optimus, and if the bug persists then be hardware problem.
Thank you for bringing your experience
prueba con reinstalar, se que es un poco tedioso pero respalda solos las apps con el titanium backup, luego en el menu recovery haz "wipe" de todos los datos, monta la sd y borra la carpeta android y data.
Ahora procede con flashear el zip con el rom y de esa forma no deberia aparecer el problema de la camara.
Pd: no he podido conseguir que el bug aparezca en mi p500, espero que con grabar de nuevo se solucione.
Pd2: lo de los botones de volumen mientras el telefono esta en landscape es un bug en froyo
This happens once in while on my phone too - also using Nessy #Hypnos. I think it's related to some changes operated in the kernel, because this behaviour was seen in some of the kernel versions of franciscofranco; DookMatt borrowed some of the improvements in his own kernel, along with this bug. Hopefully it will be fixed when Dook gets his phone back from servicing, if he decides to resume developing for our community.
using hypno#2 no problems :!
masteryx said:
This happens once in while on my phone too - also using Nessy #Hypnos. I think it's related to some changes operated in the kernel... Hopefully it will be fixed when Dook gets his phone back from servicing, if he decides to resume developing for our community.
Click to expand...
Click to collapse
I hope that Dook come back soon, Hypnos is very quick and smooth, I liked a lot, but still gives me the camera bug, and it happens even without touching the volume buttons, just flashes constantly.
I reinstalled and still the same problem, as you say could be a problem with the kernel.
I probe Hypnos & OpenOptimus (francokernel 13.1) and both give me the bug.
Devoid Franco (francokernel 13.1) and Lol 1.4.2 no problems, but I like Lol because I felt it more fluid.
Thanks for the help!
It's a shame not being able to express this in the corresponding post but apparently I have no authorization
Note: maybe could influence the launcher or the same Rom, probe OpenOptimus (francokernel 13.1) and gave me the camera bug, but Devoid Franco (francokernel 13.1) did not give me the bug.
..............................................................................................................................................
Espero que Dook vuelva pronto, Hypnos es muy rápido y suave, me gustó mucho, pero todavía me da el error de la cámara, y ocurre incluso sin tocar los botones de volumen, sólo parpadea constantemente.
He reinstalado y sigue siendo el mismo problema, como lo comentas puede haber un problema con el kernel.
Probe Hypnos y OpenOptimus (francokernel 13.1) y ambos me dan el error.
DevoidFranco (francokernel 13.1) y Lol 1.4.2 ningún problema, pero me gusta Lol porque se siente más fluido.
Gracias por la ayuda!
Es una pena no poder expresar esto en el post correspondiente, pero al parecer no tengo autorización
Nota: es posible que pudiera influir el launcher o el mismo Rom, probe OpenOptimus (francokernel 13.1) y me dio el bug de la cámara, pero DevoidFranco (francokernel 13.1) NO me lo dio.
There could be many factors that trigger this bug. For me, it stopped happening in the last 2 days and the camera worked ok... so it's hard to tell what combination of factors could be to blame. That's why I wrote in my previous post that it happened to me "once in a while". I only wanted to confirm the bug's presence in Nessy #Hypnos2, but whoever is reading this thread should be aware that it's not permanent and some other people are not experiencing this bug at all.
I have the flashing/flickering when I'm overclocked, on stock speeds it works fine.
On mik's CM7 using his 6.5 version.
Mmm... overclock, eso podría ser... pero porque el mismo kernel funciona y no, en distintos rom? (Francokernel)
Sent from my LG-P500 using XDA App
axyman said:
Mmm... overclock, eso podría ser... pero porque el mismo kernel funciona y no, en distintos rom? (Francokernel)
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
axyman, even though some of us understand Spanish directly and others simply can use Google Translate to make sense of what you said, I have to remind you that on public boards English is mandatory.
Concerning your question, I have no answer since I am not a developer. Only the devs know what they changed that could reflect in the camera's behavior.
Ups! Sorry i forgot the translation in my last comment
Sent from my LG-P500 using XDA App
Flicker in camera appears in bright light and with overclocked CPU. In any kernels (tried a few, all have same bug). Bad bug, but can be much worse
I'm planning to flash hypnos 2. Does the rom has this bug?
Related
Amigos constructores de ROM
Soy un fanático de cambiar el ROM de mi ATT Fuze pero una de las aplicaciones más importantes para mí es el Voice Speed dial 1.2 ya que estoy trabajando contantemente como conductor y necesito mis manos libres. He notado que en algunos ROM, no importando el Bluetooth que utilice no se activa desde el auricular. Creo que al modificar los ROM podrían estar eliminando algo importante para esa función. He borrado varios ROM por ese detalle. He seguido las instrucciones que me han dado y aun así no funciona. Les agradecería que me ayudaran con este problema o si es posible y no es mucho pedir fabriquen los ROM con el Voice Speed Dial 1.2. Son unos Genios.
Gracias por hacer mi vida más placentera. Jejejeje.
Friends builders ROM
I'm a fan of changing the ROM of my ATT Fuze but one of the most important to me is the Voice Speed Dial 1.2 because I am continuously working as a driver and I need my hands free. I have noticed that some ROM, no matter who uses the Bluetooth is not activated from the handset. I believe that modifying the ROM may be removing something important for this role. I have deleted several ROM for this detail. I followed the instructions given to me and still does not work. Please help me with this problem or if it is possible and is not much to ask to produce the ROM Voice Speed Dial 1.2. They're geniuses.
Thanks for making my life more pleasant. Jejejeje.
English (Google Translator): Hi, Sorry but first of all. Do not speak English. : ( But I need the help of this great community of developers.
My problem is this, I have an Optimus One P500, brought android originally wanted to upgrade to 2.2.1 and 2.3.3. Check all the options of the forum and I decided to root using the method GingerBreak the rooteo runs without any apparent error, but to my surprise when you restart your phone is Emergency Mode (yellow screen), I thought instantly that I had bricked, remove the battery and left it like 10min, then place it back and turned on the computer, strangely lit correctly, did not show emergency mode. Again I thought it had already been solved, but when
you turn off the computer again returned to the screen yellow emergency mode, the strange thing is that by removing the battery 10min and starts back up if the right way.
But because it's annoying that every time you turn it off need to do
this (remove the battery and such) because I decided to follow the methods desbrickeo who are here in the forum, flashing a ROM format 2.3.3. Kdz smoothly , then do factory reset (wipe) the data necessary to eliminate the previous ROM and the phone lit correctly, but off and on again to find the screen yellow emergency mode again, no change, wait 10 minutes and starts normally.
The situation is tired and annoyed me, so I turn to you, help you regain normal operation.
Any suggestions or help will be welcome, please do not delete the post because it is in Spanish which really NOT write or speak English.
Best regards.
Buenas, primero que nada DISCULPAS pero. DON'T speak english.
Sin embargo estoy necesitando la ayuda de esta gran comunidad de desarrolladores.
Mi problema es el siguiente, tengo un Optimus One P500, originalmente traia android 2.2.1 y queria actualizarlo a 2.3.3. Revise todas las opciones del foro y me decidi a rootear usando el metodo GingerBreak, el rooteo se ejecuto sin ningun error aparente, pero para mi sorpresa cuando reinicie el telefono quedo en MODO EMERGENCIA (pantalla amarilla), pense instantaneamente que lo habia brickeado, quite la bateria y lo deje asi como 10min, luego la coloque de nuevo y encendi el equipo, cosa rara encendio de manera correcta, NO mostro el modo emergencia.
De nuevo pense que ya se habia solucionado, pero al apagar de nuevo el equipo volvio a mostrar la pantalla amarilla en modo emergencia, lo raro es que quitando la bateria 10min y volviendolo a encender SI arranca de manera correcta.
Pero debido a que es MOLESTO que cada vez que lo apague deba hacer esto (quitar la bateria y tal) pues me decidi a seguir los metodos de desbrickeo que estan aqui en el foro, flashee una ROM 2.3.3 en formato .kdz sin inconvenientes, luego realice el reseteo de fabrica (wipe) necesario para eliminar los datos de la ROM anterior y el telefono encendio de manera correcta, pero nuevamente al apagarlo y encenderlo encontre la pantalla amarilla del modo emergencia de nuevo, sin cambios, espere 10min e inicia normalmente.
La situacion me tiene cansado y molesto, por eso acudo a ustedes, ayudenme a recuperar el funcionamiento NORMAL del equipo.
Cualquier sugerencia o ayuda sera MUY bien recibida, por favor no borren el post por estar en español que de verdad NO se escribir ni hablar ingles.
Saludos cordiales.
Forum rules
Speak English, or use Google Translate.
Google Translate :
Hi, Sorry but first of all. Do not speak English.
But I need the help of this great community of developers.
My problem is this, I have an Optimus One P500, brought android originally wanted to upgrade to 2.2.1 and 2.3.3. Check all the options of the forum and I decided to root using the method GingerBreak the rooteo runs without any apparent error, but to my surprise when you restart your phone is Emergency Mode (yellow screen), I thought instantly that I had bricked, remove the battery and left it like 10min, then place it back and turned on the computer, strangely lit correctly, did not show emergency mode.
Again I thought it had already been solved, but when you turn off the computer again returned to the screen yellow emergency mode, the strange thing is that by removing the battery 10min and starts back up if the right way.
But because it's annoying that every time you turn it off need to do this (remove the battery and such) because I decided to follow the methods desbrickeo who are here in the forum, flashing a ROM format 2.3.3. Kdz smoothly , then do factory reset (wipe) the data necessary to eliminate the previous ROM and the phone lit correctly, but off and on again to find the screen yellow emergency mode again, no change, wait 10 minutes and starts normally.
The situation is tired and annoyed me, so I turn to you, help you regain normal operation.
Any suggestions or help will be welcome, please do not delete the post because it is in Spanish which really NOT write or speak English.
Best regards.
Edit. Google Translator Post. Sorry. :S
try installing custom recovery?
Thundeg or ClockworkMod (from Rom Manager)? I already had installed from ROM ClockworkMod rootee manager when using GingerBreak, but the problem persisted, trying to thunderg? now I have the ROM 2.3.3 (Romanian) flashed as I said from kdz.
i think u have some problem in hardware....
make sure your phone dont have custom recovery and not rooted
go to lg service center.
juanitomigraña said:
English (Google Translator): Hi, Sorry but first of all. Do not speak English. : ( But I need the help of this great community of developers.
My problem is this, I have an Optimus One P500, brought android originally wanted to upgrade to 2.2.1 and 2.3.3. Check all the options of the forum and I decided to root using the method GingerBreak the rooteo runs without any apparent error, but to my surprise when you restart your phone is Emergency Mode (yellow screen), I thought instantly that I had bricked, remove the battery and left it like 10min, then place it back and turned on the computer, strangely lit correctly, did not show emergency mode. Again I thought it had already been solved, but when
you turn off the computer again returned to the screen yellow emergency mode, the strange thing is that by removing the battery 10min and starts back up if the right way.
But because it's annoying that every time you turn it off need to do
this (remove the battery and such) because I decided to follow the methods desbrickeo who are here in the forum, flashing a ROM format 2.3.3. Kdz smoothly , then do factory reset (wipe) the data necessary to eliminate the previous ROM and the phone lit correctly, but off and on again to find the screen yellow emergency mode again, no change, wait 10 minutes and starts normally.
The situation is tired and annoyed me, so I turn to you, help you regain normal operation.
Any suggestions or help will be welcome, please do not delete the post because it is in Spanish which really NOT write or speak English.
Best regards.
Buenas, primero que nada DISCULPAS pero. DON'T speak english.
Sin embargo estoy necesitando la ayuda de esta gran comunidad de desarrolladores.
Mi problema es el siguiente, tengo un Optimus One P500, originalmente traia android 2.2.1 y queria actualizarlo a 2.3.3. Revise todas las opciones del foro y me decidi a rootear usando el metodo GingerBreak, el rooteo se ejecuto sin ningun error aparente, pero para mi sorpresa cuando reinicie el telefono quedo en MODO EMERGENCIA (pantalla amarilla), pense instantaneamente que lo habia brickeado, quite la bateria y lo deje asi como 10min, luego la coloque de nuevo y encendi el equipo, cosa rara encendio de manera correcta, NO mostro el modo emergencia.
De nuevo pense que ya se habia solucionado, pero al apagar de nuevo el equipo volvio a mostrar la pantalla amarilla en modo emergencia, lo raro es que quitando la bateria 10min y volviendolo a encender SI arranca de manera correcta.
Pero debido a que es MOLESTO que cada vez que lo apague deba hacer esto (quitar la bateria y tal) pues me decidi a seguir los metodos de desbrickeo que estan aqui en el foro, flashee una ROM 2.3.3 en formato .kdz sin inconvenientes, luego realice el reseteo de fabrica (wipe) necesario para eliminar los datos de la ROM anterior y el telefono encendio de manera correcta, pero nuevamente al apagarlo y encenderlo encontre la pantalla amarilla del modo emergencia de nuevo, sin cambios, espere 10min e inicia normalmente.
La situacion me tiene cansado y molesto, por eso acudo a ustedes, ayudenme a recuperar el funcionamiento NORMAL del equipo.
Cualquier sugerencia o ayuda sera MUY bien recibida, por favor no borren el post por estar en español que de verdad NO se escribir ni hablar ingles.
Saludos cordiales.
Click to expand...
Click to collapse
Hi ,writing in simple English as possible for you to understand ..
I had/have this same problem ..meaning the phone when restarted would go into emergency mode ..like always after it being earlier connected to pc.
well after doing all sorts of bells and whistles ,I found out that the culprit is sd-card due to improper partitioning etc.. and just replacing the sd-card solves this highly irritating problem .. Hope this helps ya !
Thanks for your answers. The solution to bring it to technical service is the one used, I have flashed from "kdz" the official ROM from my operator, without root and no custom recovery. Tomorrow I'm taking, how sad is having these problems with a team of good behavior like this. A greeting.
Hello, first of all send my warmest greetings to all.
Well, currently on my X10 with unlocked bootloader ROM I'm running the "WolfXperia v7b6" with "v06-1113 DooMKernel" and as I'm not completely satisfied with the performance of my team, sometimes I'm noticing some lag and disconnects wifi only occasionally (eye, flash and wifi modules from recovery), is therefore that I am in search of a ROM and a kernel that offer a great experience I use my X10.
I am a big fan of overclocking, so I want a kernel that allows me to do this, but I am connected to wifi most of the day and I agree that this disconnect in the middle of a download, then I lose the job.
The ROM that seeks not matter if it's based on the official ROM 2.3.3 from Sony Ericsson, or is a AOSP (as CM7 or MIUI), but if I need to work quite well, has no important bugs that the camera captures to its maximum resolution, 720p video without lag, wifi and functional data correctly, etc, etc, etc.
Maybe if you ask for much, but that with such good cooks must be some good combination of ROM and kernel that is almost 100% effective, so I turn to you.
I hope good recommendations and any other input you may have.
PS: Sorry for my bad English (Google translation)
--------------------------------------------------------------------------------------------------------------------------------
Spanish: Hola, primero que nada envio mi mas cordial saludos a todos.
Bien, actualmente en mi x10i con Bootloader desbloqueado estoy corriendo la ROM "WolfXperia v7b6" con el "DooMKernel v06-1113" y pues no estoy totalmente satisfecho con el desempeño de mi equipo, a veces sigo notando algo de lag y el wifi se desconecta solo de vez en cuando (ojo, ya flashee los modulos wifi desde recovery), es por lo tanto que me encuentro en la busqueda de una ROM y un KERNEL que me ofrezcan una gran experiencia de uso de mi x10i.
Soy un gran amante del OverClock, por lo tanto deseo un kernel que me permita realizar esto, pero tambien estoy conectado al wifi gran parte del dia y no me conviene que este se desconecte en medio de una descarga, pues pierdo el trabajo.
La ROM que busco NO importa si es basada en la ROM oficial 2.3.3 de Sony Ericsson, o si es una AOSP (como CM7 o MIUI), pero si necesito que funcione bastante bien, que no tenga BUGs importantes, que la camara capture a su maxima resolucion, video a 720p sin lag, wifi y datos correctamente funcionales, etc, etc, etc.
Tal vez pido mucho si, pero se que con tan buenos cocineros debe existir alguna buena combinacion de ROM y Kernel que sea casi un 100% efectiva, por eso recurro a ustedes.
Espero buenas recomendaciones y cualquier otro aporte que quieran realizar.
PS: Perdonen mi mal ingles (traduccion de google)
Hi there, I'm downloading files on 500MB without disconnections, maybe you have a bad WiFi connection? Also stock (or stock based ROMs) are the most stable ROMs. I don't have any issues that you mentioned on stock rom. (I'm using doomkernel for unlocked bootloaders, full overclock)
hi juanito! well.. actually im using the rom dixperia 4 full and doomlord v6 and i dont have any important bugs! it's pretty awesome! i recomend you this rom!
Sent from my X10i using xda premium
I recommend you this ROM: http://forum.xda-developers.com/showthread.php?t=1384147
This is the first ROM I am satisfied with. No major bugs(maybe that camera zoom isn't working, but I don't care ) but the rest works perfectly for me.
LzVebz said:
Hi there, I'm downloading files on 500MB without disconnections, maybe you have a bad WiFi connection? Also stock (or stock based ROMs) are the most stable ROMs. I don't have any issues that you mentioned on stock rom. (I'm using doomkernel for unlocked bootloaders, full overclock)
Click to expand...
Click to collapse
What happens is that also has several phones with wifi connection and none of them suffers sudden disconnection, plus x10 the same as stock ROM had never suffered 2.3.3, I think this has happened since DoomKernel flashing v6-1113, or custion ROM, but things could be mine.
Spanish: LO que pasa es que también poseo varios teléfonos con conexión wifi y ninguno de ellos sufre desconexion repentina, ademas el mismo x10 cuando tenia la ROM stock 2.3.3 nunca las sufrió, me parece que esto sucede desde el flasheo de DoomKernel v6-1113, o de la ROM en custion, aunque podrían ser cosas mias.
machrio said:
hi juanito! well.. actually im using the rom dixperia 4 full and doomlord v6 and i dont have any important bugs! it's pretty awesome! i recomend you this rom!
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Hmmm, the'm watching and it looks pretty good. How will performance? Do you have many lags in the launcher? It would be much to ask you to tell me the results in some benchmarks as quadrant and antutu! The desire to have a reference.
Spanish: Uhmmm, la estoy observando y se ve bastante bien. ¿Como va en rendimiento? ¿Tiene muchos lags en el launcher? Seria mucho pedirte que me dijeras los resultados en algunos benchmarks como quadrant y antutu! Los deseo para tener una referencia.
Andro_Joker said:
I recommend you this ROM: http://forum.xda-developers.com/showthread.php?t=1384147
This is the first ROM I am satisfied with. No major bugs(maybe that camera zoom isn't working, but I don't care ) but the rest works perfectly for me.
Click to expand...
Click to collapse
The camera's zoom seems irrelevant, as the other bugs mentioned Oodie, I see that is a good option also, how much RAM is available to the user? As I ask the previous partner, much as I would put the results with some benchmarks such as quadrant and antutu! Please.
Spanish: Lo del zoom de la cámara me parece irrelevante, al igual que los otros bugs que menciona Oodie, veo que es una buena opción también, ¿cuanta RAM queda disponible para el usuario? Al igual que le pido al compañero anterior, seria mucho que me colocaras los resultados con algunos benchmarks como quadrant y antutu! Por favor.
Thread Move...
PD: Sorry for double post, but it is necesary.
I think 278mb RAM is avaible That is what the ROM is showing me.
I am doing well on oodies prime 7 miui. All that doesn't work is the camera zoom, and that's trivial. I use doomkernel v6 for unlocked bootloaders.
Good battery life or overclock to the max, all stable for me right now.
Sent from my X10i using XDA App
Yesterday flashing DiXperia 4, I wanted to try to see that such a performance. The full version and gaming also note that the gamming this very lack of things that I use the Sony Ericsson UI, so I decided to try for a few days the full.
I notice that no longer has a smooth behavior when I install the applications I use daily (normal things, the market). The home becomes something heavy and begins to be lag.
Another thing I liked was that the notification bar is transparent, so I play to make a small change in SystemUI.apk images to so leave it as wanted. : P
Well proves for one more day and if I finish I will change to convince another of the ROMs that I recommended.
By the way, try to flash the kernel DooMKernel v6 full overclock and my cel never boot, does this mean that it is NOT compatible with this version? I had to return to the v6-1113 version.
One more question, there is no development of ICS for the X10 more advanced than this: http://forum.xda-developers.com/showthread.php?t=1407278?
Well, is that for the Desire and the SGS i9000 (other smartphones I own) and there are some very functional, which only lacks the camera and USB (in addition to clear improvements in speed) in the case of Desire and RC1 for SGS.
-----------------------------------------------------------------------------------------------------------------------
Spanish: Ayer flashee DiXperia 4, queria probarla a ver que tal el rendimiento. La version full y la gaming tambien, note que la gamming esta muy falta de cosas que yo utilizo del SonyEricsson UI, asi que decidi probar por algunos dias la full.
Noto que deja de tener un comportamiento suave cuando instalo las aplicaciones que uso a diario (cosas normales, del market). El hogar se vuelve algo pesado y comienza a tenerse lag.
Otra cosa que no me gusto fue que la barra de notificaciones es transparente, por lo tanto me toco realizar un pequeño cambio en las imagenes de SystemUI.apk, para asi dejarla como queria.
Bueno probare por un dia mas y si no me termina de convencer cambiare a otra de las ROMs que me recomendaron.
Por cierto, intente flashear el kernel DooMKernel v6 full overclock y mi cel nunca booteo, quiere decir esto que NO es compatible con esta version? Tuve que volver a la version v6-1113.
Una pregunta mas, no existe ningun desarrollo de ICS para el X10 mas avanzado que este: http://forum.xda-developers.com/showthread.php?t=1407278 ?
Pues es que para el Desire y el SGS i9000 (otros smartphones que poseo) ya existen unas muy funcionales, donde solo falta la camara y el USB (ademas claro de mejoras en velocidad) en el caso del desire y RC1 para el SGS.
Greetings,
I've used of course stock, Wolfbreak up to v7, T.E.A.M. to v3, back to Wolf, then to DonutHD, to currently Oodie Prime 7. Wolf's seems to be the best basic version to oc with decent quadrant scores. TEAM is a great ui and user modified, good quad scores. Donut was by far the highest quad score, almost double of any other rom I tried. Prime 7 is fast, completely different ui. Great quad scores and features from miui that make using the device easier. As with any rom, read everything about it before you start, and always backup.
I don't want to bother the community with another thread about the same topic so i'll ask here, i'm getting a x10 this january and i don't like the SE default UI, and i've seen it, and to me it looks very laggy so i want you all to recommend the best custom rom for my requirements:
1. Fluid, fast almost no lag (good RAM usage)! Fluid multitouch, pinch to zoom etc.
2. Stable
3. No mayor bugs and offcourse that almost everything works
4. Good battery life
5. Good for soft gamming (most 2d games and some 3d)
And offcourse the kernel you prefer and why
--------------------------- ------------- ---------
Perdon juanito por tomar tu post jeje pero es una inquietud muy parecida a la tuya asi que me parecio mejor aprovechar tu post que crear uno nuevo
Vaizen said:
I don't want to bother the community with another thread about the same topic so i'll ask here, i'm getting a x10 this january and i don't like the SE default UI, and i've seen it, and to me it looks very laggy so i want you all to recommend the best custom rom for my requirements:
1. Fluid, fast almost no lag (good RAM usage)! Fluid multitouch, pinch to zoom etc.
2. Stable
3. No mayor bugs and offcourse that almost everything works
4. Good battery life
5. Good for soft gamming (most 2d games and some 3d)
And offcourse the kernel you prefer and why
--------------------------- ------------- ---------
Perdon juanito por tomar tu post jeje pero es una inquietud muy parecida a la tuya asi que me parecio mejor aprovechar tu post que crear uno nuevo
Click to expand...
Click to collapse
For me there is no problem, it is best to resolve the concerns of many.
Well, I'm currently testing ThGo2 v13c (beta) and I really quite impressive fluidity that keeps the ROM even with all the applications I use daily. 4 DiXperia use it a couple of days but had a bug with the application "infinity edge" (contacts) and also becomes excessively slow to install all my applications.
I have not yet decided to try a ROM without SEMC interface, but may soon do so, I like 2 or 3 I've seen here.
i use ewjet for locked bootloader with dooms kernel v6 full overclocked version been fine for me even dungeon hunter is smooth gameplay
huzi7868 said:
i use ewjet for locked bootloader with dooms kernel v6 full overclocked version been fine for me even dungeon hunter is smooth gameplay
Click to expand...
Click to collapse
I also saw, but not completely convinced me. I am currently testing the DonutHD and this great, why change? For problems with ThGo2 v13c (Beta) + DooMKernel v6-1113.
Change the kernel to a stock version but slightly modified by DoomLoRD and so far everything is going great, anything I say.
Hello. I have tried to install 7.1.2 in my Neo with his corresponding kernel and it starts loop boot. I proved 7.2.0 with the same kernel of 7.1.2, and it had many problems with wifi, many cuts. I have installed FXP 103 7.2.0 in my Xperia Neo, with his correspondent kernel, and all good works. Just now I am with FXP 103 with his correspondent kernel, but it has two problems: The program chamber is constant in functioning, for what it was consuming many battery. I eliminated it, but even this way, there consumes more battery than the kernel of 7.1.0 or that the original one (I have the processor to 650mhz ondemand). I wanted to put the kernel of CM 7.1.2 in FXP 7.2.0 ROM, but with the cuts of the wifi it is impossible. Has it solution? PD: sorry for my english, but I'm Spanish
Well, I was usin' FXP0103 'til 1 hour ago, haha.
I'm using Night Elfs' kernel, http://forum.xda-developers.com/showpost.php?p=21175200&postcount=54; just flash it via fastboot and flash the zip with wifi modules from CWM. the only known bug it's wifi tethering. Better drain battery, CWM-mod (doom), you can even backup your sd-ext with this!
español:
Hasta hace un rato estuve usando FXP0103, te recomiendo el kernel de Night Elf, que en principio salió para la ROM de Achotjan, pero flashealo con FXP0103, y los módulos del wifi y pista, tiene mejor duración la batería, y el CWM-mod es el de doom, también hace backup de sd-ext si usas, etc. Cualquier cosa, avisa Igualmente, por si tal, hazte un backup antes de flashear los módulos del wifi, no vaya a ser que no te convenza o algo :\
Thank you very much! I flashed the kernel with his modules wifi. At the moment with the FXP103 it is OK, it of the battery, it will be necessary to wait. The problem that I have in the FXP103 is that the app of the camera is in functioning all the time, and consumes many battery like that. If uninstall the app of chamber goes better, but I do not have camera. Already it will comment that such this new kernel.
Español: que eso...se me da mejor xD
Muchas gracias!yo he flasheado el kernel con sus modulos wifi. De momento con la FXP103 va bien, el problema con batería,habrá que esperar. El problema que tengo en la FXP103 es que la app de la cámara está en funcionamiento todo el tiempo, y consume mucha batería asi. Si desinstalo la app de camara va mejor,pero no tengo camara. Ya comentare que tal este nuevo kernel.
Camera "always" in "background"? Weird... Maybe it's just other app which is using your camera or something...
español: ¿La camára ejecutándose todo el rato? Qué raro... Quizá es solo otra app que necesita la cámara y tal, porque a mí nada, solo se ejecuta cuando la uso, obviamente.. xD
I have erased the program camera that comes with the rom and works well. Before, in consumption of battery shows camera and a major percentage(+ 30%) that the screen and that the inactive device. I tried with another app for the camera but the same thing happens. It seems that she remains opened and I must erase the app..And I have used the camera only to prove it
español: He borrado el programa camera que viene con la rom y funciona bien. Antes,en consumo de batería ponia camara y un porcentaje mayor que la pantalla y que el dispositivo inactivo. Probé con otra app para la camara,pero pasa lo mismo. Parece que se queda abierta y debo borrar la app...y en realidad la camara solo la he usado para probar si funcionaba
EDITO: esperare aver cuanto me dura la bateria ahora,con el oficial 4-5 dias,a ver con este...pero vamos,el problema de la camara me trae...loco
I see that FXP104 is released. Can I update my FXP103 to FXP104 without losing my configuration?
What is the latest cm 7.2 fixes for me?
Please any reply?
If you wanna keep using night-elf kernel, you need to reflash the wifi modules after install the update. If you wanna try the FXP kernel, just flash the kernel with fastboot, and the zip from recovery. Also, just flash the ZIP and then in clockworkmod>Advanced>Wipe Dalvik Cache, then reboot. You don't lose any data.
español: Si quieres seguir usando el kernel de night-elf, tienes que reflashear los módulos wifi tras instalar la actualización; si quieres probar el kernel de FXP, no hacen falta esos módulos del de night-elf.
El proceso de actualización es: flashear el ZIP del update, luego como recomendación en clockworkmod>Advanced>Wipe Dalvik Cache. Y ya lo tienes. No pierdes los datos de aplicaciones ni nada. Igualmente, para mayor tranquilidad, quizá haz un backup antes.
Thanks. I flash the update and all OK. But battery downs 1% 1hour inactive with night-elf kernel + fxp103.
EDIT: Solved. I have flashed FXP104 with night-elf kernel and 2% battery 8h inactive.
Thanks
Glad to hear it.
Enviado desde mi MT15i usando Tapatalk
Sorry For my Bad english but I have the Lg p708 (8Mp Camera)
and I need to know if there is any custom rom, or some form of installing Cwm
Or if they have a compatible Kernel Swap
Sorry if this is not right place to ask
i have the celphone rooted
If anyone speaks Spanish please answer me
thx:angel:
ni modo mano
BetaTesterMx said:
Sorry For my Bad english but I have the Lg p708 (8Mp Camera)
and I need to know if there is any custom rom, or some form of installing Cwm
Or if they have a compatible Kernel Swap
Sorry if this is not right place to ask
i have the celphone rooted
If anyone speaks Spanish please answer me
thx:angel:
Click to expand...
Click to collapse
Estamos en la mismas compañero, mi mujer tiene este mismo teléfono pero desde hace 3 meses no encontramos nada para el. A duras penas he podido hacerlo root, hasta donde se no existe ni una versión compatible de CWM para este modelo. En htcmania encontré una rom, pero no es totalmente compatible con el p708 pues la cámara falla, no la he probado, pero prefiero esperar y no correr riesgos. Hay 3 versiones de la serie L7, el p703, p705 y p708. Así que aguas.
Si llegas a saber de alguna rom, me avisas.
Saludos desde los Altos de Chiapas
Did somebody find a ROM for the P708?
__________________________________________________
Encontraron algun ROM para el P708?
Recien instale CM10 en la p708 de mi esposa, pero la camara no funciona, sabe alguno de ustedes si puedo instalar el APK de la camara original???
I just install CM10 on my wife's P708, but the camera does not work, any of you know if I can install the APK from the original camera???
jamorenom said:
Recien instale CM10 en la p708 de mi esposa, pero la camara no funciona, sabe alguno de ustedes si puedo instalar el APK de la camara original???
I just install CM10 on my wife's P708, but the camera does not work, any of you know if I can install the APK from the original camera???
Click to expand...
Click to collapse
Yo lo intenté con Titanium Backup, hice un respaldo de la cámara y galería pero no se restauraban en CM10 así que sólo queda esperar un ROM ya hecha para nuestro teléfono. :/
I tried it with Titanium Backup, I made a backup of both the camera and gallery apps but they don't restore on CM10 so we will have to wait for a ROM exclusively for our phone. :/
Still no camera?
Is there still no way to get the camera working on P708?
The stock ROM is slugish, I haven't installed CM10 on it yet because of the camera.
___________________________________________________________________________________________________________
Aun no hay manera de tener una cámara funcional en el P708?
El ROM original es muy lento y no he instalado CM10 debido a la falta de cámara.
detesto said:
Is there still no way to get the camera working on P708?
The stock ROM is slugish, I haven't installed CM10 on it yet because of the camera.
___________________________________________________________________________________________________________
Aun no hay manera de tener una cámara funcional en el P708?
El ROM original es muy lento y no he instalado CM10 debido a la falta de cámara.
Click to expand...
Click to collapse
Still waiting bro...