Galaxy S 3G USA
My base band is KB5
My modem is KB1
I'm having a lot of problems with my phone starting up slowly, lagging out.. I have been trying to look up a better rom and modem.. Does anyone have any suggestions or links?
I'm ready to go back to stock... Any help would be awesome
You already seem to be on stock since you've listed no custom rom's name. In any case if you know how to go back to stock then do it regardless of what rom you'll be flashing then when you settle for one, flash it as usual.
Check my signature for a guide on going back to stock.
I suggest Trigger for stability... latest Cyanogen for play.
s15274n said:
Check my signature for a guide on going back to stock.
I suggest Trigger for stability... latest Cyanogen for play.
Click to expand...
Click to collapse
Thanks,
So If I run the JFD Rom and the pit it will bring me back to stock and after that is completed I can try and load up trigger or cyanogen basically MIUI is the newest 2.3.3?
I always take my sim and sd card out before I ever flash a new modem/rom ect..
Trigger 3.3 beta question
Can you flash trigger 3.3 beta with odin?
A link for install instructions would be great, I only know how to use odin..
My vibrant is back to stock and I would like to check out the trigger 3.3
Shinwrx said:
I always take my sim and sd card out before I ever flash a new modem/rom ect..
Click to expand...
Click to collapse
that made me chuckle
Shinwrx said:
Can you flash trigger 3.3 beta with odin?
A link for install instructions would be great, I only know how to use odin..
My vibrant is back to stock and I would like to check out the trigger 3.3
Click to expand...
Click to collapse
Trigger is 2.2 just flash in CwMRecovery.
- If I were you I'd just flash Trigger 3.2 as 3.3 is a beta release. You would probably be happier with 3.2 until 3.3 came out of its beta stage and Roman releases a public version here at XDA. Although the more testies the better!(LOL, thats what she said)Good luck!
You should go in the rom/developoment section and do some reading; you will find an unlimited amount of talented developers posting their AMAZING roms. But you should do some reading on each one because to each their own.
rooting clockwork flashing trigger
I root, Rom manager, boot to recovery, flash the rom, After the rom finishes I reboot and it takes me right back to recovery over and over wtf am i doing wrong? Any help would be great, Trying to load this trigger 3.3 and can't seem to get it done..
ahhh! Bootloop!LOL
(this is where a nandroid comes in handy) if you have one just restore it since you have access to recovery. I'm guessing you don't. Try:
in recovery choose "reinstall updates" then choose it again
if all else fails ODIN and start over. Good luck!
I odin'd the KB5+voodoo and it includes clockwork recovery. Flashed trigger 3.2 rom and I couldn't be happier Hope this helps somebody
Related
I am coming from one of team whiskeys 2.1 roms and I havent looked much into other roms since then about 2 months ago or so. I want to try going Froyo with Nero 3. I have Odin downloaded and kind of get how to use it and stuff. But when going from eclair to froyo everybody says to odin to stock.. Well which rom is the stock one and is it stock 2.1 I am supposed to odin back to or is it the 2.2 stock? and Is there any other steps I should follow after odin-ing back to "stock" I have downloaded much of what I needed and have been searching for a while And i remember seeing a post a long while ago on the steps i should follow but my search skills aren't the greatest. Thanks in advance for any help!
dev_man77 said:
I am coming from one of team whiskeys 2.1 roms and I havent looked much into other roms since then about 2 months ago or so. I want to try going Froyo with Nero 3. I have Odin downloaded and kind of get how to use it and stuff. But when going from eclair to froyo everybody says to odin to stock.. Well which rom is the stock one and is it stock 2.1 I am supposed to odin back to or is it the 2.2 stock? and Is there any other steps I should follow after odin-ing back to "stock" I have downloaded much of what I needed and have been searching for a while And i remember seeing a post a long while ago on the steps i should follow but my search skills aren't the greatest. Thanks in advance for any help!
Click to expand...
Click to collapse
If you are on Fusion 2.1, just use rom manager and install this using install from SD card option. You should be OK. If that does not help try ODIN.
Incase you are stuck and need to revert back to stock or want to take the long route just incase then use this file
Stock Rom
PIT File for ODIN
Thanks. I just tried it and everything seemed to have flashed over okay. I just didnt know if it was required to odin to stock first or not. Everything is working pretty good so far. gonna mess around with a few new kernels now.
Cant seem to get clockwork mod recovery to work
Any suggestions on how to get back into the clockwork mod recovery so i can install from zips again?
dev_man77 said:
Any suggestions on how to get back into the clockwork mod recovery so i can install from zips again?
Click to expand...
Click to collapse
Install Rom Manager from Market, Make sure you have Busy Box & Super user app. Launch rom Manager, Select Clockwork Recovery, Select your device from pop up window. Select Reboot to Clockwork Recovery menu. Phone will restart, select reinstall packages it will restart again and take you into Clockwork menu.
Tried this twice and it keeps taking me back to the stock recovery mode... Dont know why.
*edit*
Had to reinstall packages twice and it finally worked. Everything is gravy. Gonna see if the SuperIO kernel is better than the stock+Voodoo5...
I have looked and read, looked and read and I was unable to find an answer to my question that I have about flashing a custom rom on my rooted vibrant 2.2 KA6.
Everything that I have read says to Odin back to 2.1 and then use superoneclick. However I did follow the tutorial to root my vibrant running Froyo 2.2 KA6 with success after replacing the data cable for my computer to recognize my Vibrant. I have confirmed that I have root, I have tried the root apps and everything is good to go.
My question is can I flash a custom rom on my rooted Vibrant on Froyo 2.2 KA6. I want to flash Trigger 3.2 because I have heard awesome reviews about it. I already have a nandroid backup and a custom backup. Is there anything that I need or need to do before I proceed? I have been reading the tutorials and the flashing guides and I'm ready to go, I just want to be sure I can flash on rooted stock KA6.-Thanks
Sorry if this has been answered already I was unable to find the thread.
Ummmmmm im not sure but since u have froyo in your phone u just need to root your phone and then install the custom rom you want... i'd suggest u to flash trigger and for you to root ypur phone you'd need tp download AIO VIBRANT TOOL BAR.. if you're using a computer you should see it at the very top on the APPS AND THEMES section omce you download it run the program and once the tool bar appears.. theres goin to be alot of options...they are in order so you wont get confused so in this case you'd need to go to step #5 i think wich is ROOTE YOUR PHONE im not sure what it really says but it says something about rooting your phone BUT MAKE SURE THAT YOU HAVE YOUR FONE IN DEBUGGING MODE and once you do it its goin to take you to the android recovery menu and in the tool bar it shows u the steps... if you need more help and i'll guide you....
Sent from my GT-I9000 using XDA Premium App
Just use z4root, then get rom manager, install cwm and flash away
Sent from my GT-I9000 using XDA Premium App
Since you're rooted, all you need is to get into clockwork recovery and flash the rom. Have you downloaded rom manager and installed cwm?
I just rooted yesterday for the first time. I was on t mob stock KB5 . I used Odin to go back to stock Eclair , and than downloaded update.zip and used Astro File Manager from market to move the update.zip to sdcard. Than I flashed TRIGGER 3.2 and it is all good . I feel like I discoverd America.
My point is that you need CLEAN INSTALL, if you wanna run Trigger smooth..
Lagunas11, DEFINITIONOFREAL, thanks for the info but I already have root and Im ready to flash. I just wanted to be sure that I could flash a custom rom over rooted stock froyo 2.2 KA6.
jRiot68 yes I already have rom manager and cwm installed, I already have a custom backup and Im ready to flash, what I meant by my question was if I could flash over my rooted 2.2 KA6. Im ready to flash trigger 3.2! Thanks for answering my question.
Roundel77 are u sure I have to odin I was hoping I didnt have to will trigger not run right if I dont?
I want to flash trigger tonite! If I have to odin can I stay on root froyo 2.2 KA 6 and odin or do I need to unroot then odin back to 2.1 then root so I can flash?I would like to know so I can flash tonite thanks.
Sent from my SGH-T959 using XDA App
If you can run CWM, then you can flash.
no odin needed.
Although I'm not sure how you can use it since the 3e recovery won't let you unpack the update.zip file.
If not, then you have to odin.
laylovj cwm has been working flawlessly I know what you mean about the 3e however the tutorial I followed allowed me to root froyo 2.2 KA6 and it also allowed me to modify the 3e to 2e. I am able to run cwm and have been able create a nandroid backup. So thank you for the response I will be flashing trigger 3.2 tonight. I will report the results later.
Sent from my SGH-T959 using XDA App
Just reporting back to inform you guys that I flashed trigger 3.2 last night and everything worked perfectly! I should have done this a long time ago! Trigger is working very well no problems to report.
I now want to flash some themes any suggestions? I really like the splash of color theme but was unable to determine wether or not it is capitiable with trigger 3.2. I also want to flash a new kernel so that I can overclock where can I get one for froyo 2.2?
U might wanna try the new bullet kernel it should go hand in hand with trigger I don't have a thread but just type bullet. It'll come up. It works great with my 2.2 froyo kb1 on skriller. An it runs real. stable at 1.42ghz. Proper oc values r shown with the bullet thread. Its good procedure to follow but amazing results on speed tests! !!!!!!!!
Glad everything worked well with Trigger flash . Maybe wanna try this theme: THEME] Vibrant HD v1.3- Trigger/Bionix-V
Thanks antdogg I'm researching now I will be flashing tonite or tomorrow. Will posting the results later tomorrow.
roundel77 thanks for the suggestion I will be looking into that tonight I will post results later tomorrow.
likely same here
Deleted and open as another post
I have tried for the past 4 hours to install the AOSP MIUI ROM. I have tried a newer recovery, a mtd kernel. No luck. I install the rom in CWM 2.5, but it boot loops at that point and states that the sd card can not be mounted. It then counts down to 20 and resets over and over. Can anyone shed light and provide steps?
Well the first thing I would do for yourself is to Odin back to stock using the 2.2 pit file as well as odining the stock 2.2 ROM. Make sure you repartition as well so that everything is formatted!!! This will solve SO many issues and give prospective forum members a place to start with your problems you are having.
2.2 Pit file - http://download180.mediafire.com/09z...atlas_v2.2.pit
2.2 stock froyo - http://www1279.megaupload.com/files/...EL.tar.md5.tar
I am going to assume you have odin and not link a download simply for the fact that if you have read ANYTHING pertaining to CM7 or MIUI in our forums you should be well aware of how to use it.
After wiping you will need to flash the modem you want via odin. They are located in the sticky in the dev thread.
After this you will need to flash the CWM that is located in the CM7 or MIUI threads themselves.
here is a link : cwm3_fixed_for_cm7-ODIN.tar
Use odin to flash it, then simply flash the AOSP package of your choice from the their respective threads here in the forums.
TedLWJR said:
I have tried for the past 4 hours to install the AOSP MIUI ROM. I have tried a newer recovery, a mtd kernel. No luck. I install the rom in CWM 2.5, but it boot loops at that point and states that the sd card can not be mounted. It then counts down to 20 and resets over and over. Can anyone shed light and provide steps?
Click to expand...
Click to collapse
Also worth noting that I missed in the first post. You mentioned CWM 2.5....sadly this will not work nor will it work with any other CWM floating around. The ONLY way currently to flash it is with the CWM I linked above. These are from JT and fixed to work with the AOSP ROMs.
from JT himself
*** The recoveries attached below are ONLY to be flashed on a BML ROM, ie: touchwiz based ROM or earlier, non-MTD CMx ROM. DO NOT FLASH THEM IF YOU ARE CURRENTLY ON CM7 OR MIUI MTD ROMS! ***
Click to expand...
Click to collapse
Thank you, I tried to use the new recovery provided by JT, alas it did not work for MIUI, I will try again tomorrow when spirits are higher, I usually start from DL09 and OTA my way back to ED04, Do i have to stay on EB01 or can i use ED04, and yes i am familiar with odin. Thanks again my friend.
TedLWJR said:
Thank you, I tried to use the new recovery provided by JT, alas it did not work for MIUI, I will try again tomorrow when spirits are higher, I usually start from DL09 and OTA my way back to ED04, Do i have to stay on EB01 or can i use ED04, and yes i am familiar with odin. Thanks again my friend.
Click to expand...
Click to collapse
Don't quote me.... It shouldn't matter (EB01, ED01, ED04...etc) All that is needed is the updated recovery to run the package install. The package will format your filesystem so your version should not matter. If you are referring to the modem... its your preference. I am on EC01 but last time I was on like ED04 or something...
Might also try flashing CM7 first, booting in, then flashing MIUI since they use the same BML format.
Still no dice, I'm sick of trying this, I have Odined back to 2.2 around 10 times already. A good write-up is definitely necessary.
What kernal are you loading with ED04, etc.. before trying CM7?
Stock as i think i read that the rom includes a kernel, should i try a MTD kernel and then flash CM7/MIUI?
No, I was just making sure you weren't loading any voodoo kernals.
When I had issues loading MIUI, I went all the way back to the DI01 all in one rom (odin) then DL09, then CWM Fix all (3.x), then MIUI. Load the rom before you load the MIUI cwr.
I'm having major problems too. I've tried about every method to get onto CM7, but I either end up with boot loops or get stuck on the GalaxyS/CM7 boot screen for a long time (over 30 minutes).
I've started from almost every platform (stock back to DI01, comrom, evil, ....)
Used JT's cwm and still no go. I've rebuild my partitions in both odin and heimdall, I don't know what else to try myself.
I've gotten to the same place with the Galaxy S and Cyanogen screen, help is appreciated.
Sent from my SCH-I500 using XDA Premium App
im in teh same situation. ive tried doing everything i can find and i NEED miui on my phone.
haha seriously any additional help would be appreciated
hi,
I am sorry if this is a dumb question. But i have failed several attempts while shifting to ICS (RC 5 by team-nyx). Every time when i install ROM & kernel via CWM and boot the device (vibrant t959) it freezes on the screen with VIBRANT and SAMSUNG displaying WHITE on BLACK back ground.
i have gone back to JFD and tried several times BUT same result.
I was on froyo 2.2 (build UVKB5) updated via kies and did it but no luck. I followed wiki.cyanogenmod.com/wiki/Samsung_Vibrant:_Full_Update_Guide and did starting from No. 03 --
downloaded Cmenard's Kernel with the ClockworkMod Recovery 2.5
Heimdall Suite 1.3.2 for windows
AND upto No. 9 under Windows ONLY: section
the CWM installs as it says (A blue transfer bar will appear on the phone showing the kernel being transferred. The device will reboot automatically. )
after that i cleared factory, cache and dalvik cache.
then I select install Zip from SD card and chose the ROM (which is from team-nyx.com/index.php/releases).
after 3% it says rebooting and vibrant shuts down and reboots.. when after I clicked the combo (vol+vol-power) to enter the CWM its not there.. so I reinstall using [heimdall flash --kernel zImage] command in PC's cmd. then after i redid the same to select from SD and then ROM installed ok.
then I selected the kerenel which was taken by same source and installation went normal..
after I select reboot from CWM it reboots and hangs on vibrant screen.
I cannot figure OUT WHAT IM doing WRONG..
Please HELP ME..!!!
thank you for your time
I am moving to 2.2 via kies after going back to stock JFD. then i will root my vibrant. after that i will install ROM manager from market. THEN i will try to FLASH to ICS RC 5 + kernel from nyx TEAM.
I dont know what is wrong.. please HELP
From what you told us it sounds right. Have you tried a different ICS rom? Give ICS slim a try. When you Odin back did you checked re-partition?
Sent from my SGH-T959 using Tapatalk 2
You should try flashing the Gingerbread bootloaders using Odin after you flash back to stock. Those bootloaders can run a Froyo ROM as well as ICS so it wouldn't hurt to do either way. After you flash the bootloader then try flashing the ROM.
And try a different ROM like iwillkillyou suggested. Slim is good, but ICZen is very solid if you're tipping your toes into ICS.
iwillkillyou said:
From what you told us it sounds right. Have you tried a different ICS rom? Give ICS slim a try. When you Odin back did you checked re-partition?
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
hi,
thank you for the reply. No i havent tried a different ROM. yes I checked repartiton when ODin Y this is happening.. I have Flashed this ROM once.. but then when someone calls me they cudnt hear me clearly.. when i initiate the call its ok.. so I moved back to JFD..:/
kaiser_bun said:
You should try flashing the Gingerbread bootloaders using Odin after you flash back to stock. Those bootloaders can run a Froyo ROM as well as ICS so it wouldn't hurt to do either way. After you flash the bootloader then try flashing the ROM.
And try a different ROM like iwillkillyou suggested. Slim is good, but ICZen is very solid if you're tipping your toes into ICS.
Click to expand...
Click to collapse
thank you for the reply.. I jz finished Updating to 2.2 via kies..ok I will flash Gingerbread bootloaders using Odin. I will try I think it wont be necessary to ROOT the vibrant..to Flash Bootloaders.. I am going to Flash the ICS ROM via ROM manager (after rooting via SuperOneclick root2.3.3)..
haarsh said:
thank you for the reply.. I jz finished Updating to 2.2 via kies..ok I will flash Gingerbread bootloaders using Odin. I will try I think it wont be necessary to ROOT the vibrant..to Flash Bootloaders.. I am going to Flash the ICS ROM via ROM manager (after rooting via SuperOneclick root2.3.3)..
Click to expand...
Click to collapse
Just so that you know, everytime you are using Kies, you are running the risk of hardbricking your device. It is notorius for that and in fact someone last week got HBricked with it.
I don't use ROM Manager and probably won't as long as I have a Vibrant. All you need to do is go back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall PAckages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Also for more detailed instructions, se my ICS install giude also in my signature.
Woodrube said:
Just so that you know, everytime you are using Kies, you are running the risk of hardbricking your device. It is notorius for that and in fact someone last week got HBricked with it.
I don't use ROM Manager and probably won't as long as I have a Vibrant. All you need to do is go back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall PAckages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Also for more detailed instructions, se my ICS install giude also in my signature.
Click to expand...
Click to collapse
Thank you for the links.. I downloaded and place CWR inside SD. Without kies can we install official releases via Odin.. is there any way.. im sorry if that is a stupid question
No stupid questions. That is why we are here. I am pretty sure there is a flashable 2.2 stock floating aroung here. I personally don't have it though. Custom 2.2's are at this point tweaked so completely out, that they will blow the doors off any 2.2 stock ROM out there. I usggest Moped_Ryder's ROMs and Fishman's Bionix-redux ROMs. Quality, fast and stable. Not ICS, but everything works and no fear of the dreaded Encryption Bug.
PM incoming btw.
Woodrube said:
No stupid questions. That is why we are here. I am pretty sure there is a flashable 2.2 stock floating aroung here. I personally don't have it though. Custom 2.2's are at this point tweaked so completely out, that they will blow the doors off any 2.2 stock ROM out there. I usggest Moped_Ryder's ROMs and Fishman's Bionix-redux ROMs. Quality, fast and stable. Not ICS, but everything works and no fear of the dreaded Encryption Bug.
PM incoming btw.
Click to expand...
Click to collapse
thank you. btw can we Flash to 2.2 via CWM .. directly selecting the ROM from SD .. without Odin
If you can find it, you should be able to. Just put on your card and flash away, taking care to wipe accordingly.
A note on flow though:
2.1, 2.2 -can go into and out of any 2.2 there is laterally.
2.3-4.0 -will need to Odin to stock before going back to a 2.2 ROM. Can move laterally from 4.0 to 4.0 though.
(i.e DO NOT try to restore a 2.2 nandroid or flash a 2.2 ROM when you are on an ICS variant. the /system is completely changed and reformatted. You need to Odin to get it back.)
Moped Ryder uploaded a semi tweaked version of the stock 2.2 build. It's a zip that you can just flash using CWR:
http://forum.xda-developers.com/showthread.php?t=1674519
It comes rooted with busybox and some other goodies, but it's the stock kernel and whatnot. I'd highly recommend Fishman's Bionix-V Mod or Moped Ryder's Slim_Ryder ROMs if you're going to be on Froyo though. They're both great, but I went with Fishman's latest Bionix Mod since I couldn't get bluetooth to work on Moped Ryder's ROM. Which is really unfortunate because I loved Moped Ryder's otherwise.
And you don't have to Odin back to stock if you're just bouncing around Froyo or Eclair builds; only if you're coming from Gingerbread or ICS (2.3 or 4.0).
Keep us updated. I'm curious to see what worked. It's probably the gingerbread loaders. But, who knows.
Sent from my SGH-T959 using Tapatalk 2
Is your Samsung Vibrant (T959) Rooted.?
iwillkillyou said:
Keep us updated. I'm curious to see what worked. It's probably the gingerbread loaders. But, who knows.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
hi.. I tried again with flashing semaphore kernel through Odin installed CWM version higher than 2.5 to install ICS RC5 by nyx --sorry i need that soo badly so didnt checked anything else ..
@that time I was on vibrant 2.2 UVKB5 (stock)
NOT rooted
I didnt had so called
bootloaders
Click to expand...
Click to collapse
(i dunno what it means though--have to search )
BUT it didnt worked for me instead freezes at Vibrant start-up screen. So i Couldnt switch back to CWM. I Odin back to JFD with repartition clicked and my vibrant was locked (network lock). Finally, I got it cleared by application named Galaxy_S Unlock by Helroz from the market.
Now I am at the very beginning again. I am now on 2.1 JFD. I dont know WHY this happening to me .. :crying:
gonna try again with GB bootloaders.. BUT Im sick of failing and going back to 2.1 (my friends who are having captivate had no problem)
Speedy5150 said:
Is your Samsung Vibrant (T959) Rooted.?
Click to expand...
Click to collapse
At the time i was trying it was NOT rooted.. But now i have it rooted because i needed to unlock the network . which happened me for the very first time after flashing back to JFD using Odin..
Thank you guys for the links and thoughts on 2.2 ROMs.. I am not that expert . Thats why i was updating to 2.2 via KIES -- which is not a good idea as it seems with the ability 2 brick the device. I am going to get Bionix-V FishmanMod V4 FULL and install as http://forum.xda-developers.com/showthread.php?t=1441976 says..
It says Boot into clockwork recovery and i think i found something to do that in this thread http://forum.xda-developers.com/showthread.php?t=734164
I have to get ROM manager from market and go through it..
BUT Im damn upset with the RC5 ICS update by nyx being unable to installed into my device.. I will try with GB bootloaders flashed ..
If you are going to go with Fish's ROM, then all you need to do is Odin back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall Packages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Fish also has a Odin package that you can flash his ROM through Odin and not have to deal with CWR.
ROM Manager is no longer supporting 2.1, so if you do go back to JFD, then it will be hard to get RM. It is out there somewhere but really all you need is the Update.zip from above to do it. I suggest that you stay on Fish's ROM for awhile and read about ICS installs and all the little things that are involved. If you do flash Fish's ROM, you don't need to mess with the bootloaders.
Btw, aside from Kies, messing with Bootloaders is one of the sure fire ways to hardbrick your device. It only takes seconds to flash them, but do it wrong and, well you know.
Good luck and ask if you have any.
Woodrube said:
If you are going to go with Fish's ROM, then all you need to do is Odin back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall Packages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Fish also has a Odin package that you can flash his ROM through Odin and not have to deal with CWR.
ROM Manager is no longer supporting 2.1, so if you do go back to JFD, then it will be hard to get RM. It is out there somewhere but really all you need is the Update.zip from above to do it. I suggest that you stay on Fish's ROM for awhile and read about ICS installs and all the little things that are involved. If you do flash Fish's ROM, you don't need to mess with the bootloaders.
Btw, aside from Kies, messing with Bootloaders is one of the sure fire ways to hardbrick your device. It only takes seconds to flash them, but do it wrong and, well you know.
Good luck and ask if you have any.
Click to expand...
Click to collapse
thanks alot for the info brother.. some guys told me STUPID.. but YOU guys are awesome.. I am a newbie to this flashing and stuff.. but learned a lot from XDA . Thanks again for the reply. now I have stock 2.1 with ROOT . (rooted cuz i had to unlock the vibrant). I will flash to Fish's 2.2 ROM soon. BTW may i ask you after moving to Fish's ROM and later if i need to move to ICS still can I do it without messing with Bootloaders..
Thank you
That is what we are here for in the Q&A/General sections.
Regaring your question about Gingerbread bootloaders being needed:::Yes and No.
Gingerbread bootloaders were required in the infancy of ICS ROMs bc they prevented what is called "Rainbows" in your clockwork where you couldn't see anything. The options were there but you just couldn't see them. Then as ICS evolved, the need for GB bl's lessened and now you don't need them at all.
But...There's always a but...Gingerbread bl's are recommended by most of the devs for ICS builds because they seem to work better with the custom recoveries that come with some of the kernels. There is more to it but in short, GB bl's are not required but recommended.
If you go to my ICS install guide, in the middle pages and more again at the end, Yosup (highly respected user) and I have a detailed conversation about bootloaders and their installation. Once he got over the fear and did it, he was hooked and flashing ICS ROMs weekly if not more. It is a very informative section of that thread.
Hello, at the start i wanted to install some new ICS rom for my Vibrant..i try to root it with one click and i couldn't do that coz i had froyo(2.2update)..so i read some forums and found solution in odin...i used that to turn back to stock eclair where i rooted the phone ...but the problem is that now i can't install any application on the device(i need ROM manager)..i get to android market and ,click on application but nothing is happening, no download at all...than i try to use android injection with apks that i found on the net , but nothing, i always get INSTALL_FAILED_OLDER_SDK...so now i am stuck i have: fimware version-2.1 update 1,baseband T959UVJFD, kernel 2.6.29 can you tall me should i do?? thx
Read the guide in my signature on how to install ICS ROMs. It has an update.zip that you can use for CWR.
ROM manager no longer supports 2.1 (Eclair), so that is why you can't see it in the market.
Download the clockwork mod recovery file (update.zip) and save it to the internal storage on the phone. Then reboot into recovery and install packages. Might have to do it twice. Then you'll be in CWM recovery. Install from from there.
Sent from my SGH-T959 using XDA
The AIO Vibrant toolbox might be something you need to look at. you can find it here http://forum.xda-developers.com/showthread.php?t=954509
guide
i followed your guide...flashed CM7, than i try to flash Euphoria RM2.1(ICS) and flashing is starting all ok , than after 30 secs i see message 'Random offset 0x302' and it's not going forward with flashing,i pulled out battery and try 2 more times,and there is always the same problem, i'm on CM7 now(and i don't have google play what should i do? can you recoommand me some good and stable gingerbread ROM for Vibrant(if i goona be unable to install ICS Rom) thx
Woodrube said:
Read the guide in my signature on how to install ICS ROMs. It has an update.zip that you can use for CWR.
ROM manager no longer supports 2.1 (Eclair), so that is why you can't see it in the market.
Click to expand...
Click to collapse
FWIW, and this is not a knock on Team Passion (they do excellent work but few updates), but Euphoria is somewhat outdated. There are plenty of ICS ROMs out there that are more up-to-date and when ICS went from 4.0.3 to 4.0.4 there were significant code changes that were done. I suggest ICZen, or Slim or CM9.
But if you want to stay on Euphoria (AOKP based), this is from my guide:
If you get the RANDOM OFFSET error.
Don't freak out. This is an ICS security feature (as posted in Passion's FAQ post). All you have to do is pull your battery and boot back into recovery and reflash ICS over itself (just like you did with the initial CM7 bootloop) and it should push through. You may need to do this multiple times. I have read of people having to do it up to 5x. YMMV though.
Click to expand...
Click to collapse
Edit:
***----> I am having all kinds of trouble with my browser today at work, so if I don't respond right quick, that is why. But I'll get back to you or some others out there can help.
stack
man, now i am completly stack, i try to flash slim ics, found the file for vibrant, but it culdn't flash , in the middle it just stoped..and phone is just rebooting it self when i enter cw mod i can't install any other ROM from internal sd, it says no files found ffs now i can't even use phone, i need help emergently
Woodrube said:
FWIW, and this is not a knock on Team Passion (they do excellent work but few updates), but Euphoria is somewhat outdated. There are plenty of ICS ROMs out there that are more up-to-date and when ICS went from 4.0.3 to 4.0.4 there were significant code changes that were done. I suggest ICZen, or Slim or CM9.
But if you want to stay on Euphoria (AOKP based), this is from my guide:
Edit:
***----> I am having all kinds of trouble with my browser today at work, so if I don't respond right quick, that is why. But I'll get back to you or some others out there can help.
Click to expand...
Click to collapse
I suggest you Odin immediately. I fear that the next screen you will see is the Encryption Unsuccessful screen. Make sure you hit repartition in Odin though since you reformatted your system from RFS/Ext4 to MTD when you went to CM7.
odin
ok i get into odin , marked repartiton but is sais fail ??? what should i do now?
Woodrube said:
I suggest you Odin immediately. I fear that the next screen you will see is the Encryption Unsuccessful screen. Make sure you hit repartition in Odin though since you reformatted your system from RFS/Ext4 to MTD when you went to CM7.
Click to expand...
Click to collapse
If you do get past all of these, but this is unlikely for a normal flash, get either Iczen or chimera.
Sent from my SGH-T959 using xda app-developers app