Hi,
I have managed to get S-Off and sucessfully installed cyanogen mod 7.0.3 Stable
ROM...
Now can any one tell whats next
1----which radio to flash as i am experiencing bad signals for wify and data connection/ operator.
2---- how to overclock the cpu? is it by flashing Kernels
which one to use?
1: Radio available here:
http://forum.xda-developers.com/showpost.php?p=12530566&postcount=1
2: OC Settings available under Settings > Cyanogenmod Settings > CPU Settimgs. There's no need to install additional kernels / apps.
Related
I flashed my phone with cyanogen 7.2 yesterday(it was running stock gingerbread 2.3.3) and lost network access. Everything else works fine ony there is no network reception. I have tried resetting the phone, flashed another rom (icslunar) but still no luck.Pls Help
Okey man, i will play Sherlock Holmes. So:
I wondering that you didn't read FAQ, Guides etc.... like me ;p
But also i think that you are NOT as tricky as me so,
if cyanogem 7.2 is a next version of 7.1 (which has OLD BASEBAND) it seems like 7.2 is for OLD BASEBAND TOO.
What is more you have some ways to fix it:
1. Install patch from mik_os from his 7.1 CM thread.
2. Flash old baseband because stock GB in LG i equiped with new one. >>CLICK<<
3. Flash rom for NEW BASEBAND like Nitrgen - it has very very good performace.
You choose, I suggesting
I am in very good mood today - chrismas ;p
Press thanks if you want..
Cheers
Ok got my network back by restoring previous baseband but data still is not working!
Ok, here's your problem.
When you upgraded to 2.3.3 stock gingerbread, you eliminated the possibility of any ROM based on the old baseband for .32 and limited your options to ROMs supporting the NEW baseband, .35.
If you want to switch to the old baseband so you can use those ROMs I suggest you use this guide but be VERY CAREFUL.
As for your data problem, go to Settings--> Wireless and Networks-->Mobile Networks--> AccesPointNames and check. If it's empty, you should call your service provider and ask them for your GPRS/EDGE settings.
Hi,
Sorry if the question has already been asked.
I wonder whether it is possible to select only one band on ICS Passion 13.1 version.
It used to be possible on Froyo ROMs but secret codes do not seem to be compatible with ICS.
I would like to be able to only select 1700 (well known issue with devices working on Wind/Mobilicity)
What would be the options: flash a different ROM, radios ? Else ?
Thanks everyone,
Anyone, please ?
Is there an option to select the band of your choice on ICS Passion ROM other than entering *#*#INFO#*#* ?
Thanks,
I am currently running Resurrection Remix ics v1.7 with thoravukk kernal 2.48. I am looking to update to Resurrection Remix ics v1.8.1. I also want to flash the latest thoravukk kernal and the tablet mod as well. After i install v1.8.1 should i install the kernal first then mod or the other way around. I also have my phone undervolted so do i need to set the voltage back to the orginal settings as well?
normally Kernel can be flashed either before or after flashing the MOD, no difference.
still better to ask the dev of the MOD, whether the MOD required a specific Kernel first or not?.
Your undervolt setting will be automaticaly reset when you flash the Kernel, no problem you can set it again after flashing the Kernel.
Hi All,
I recently upgraded my Atrix to custom ROM MIUI V 2.4.27 for the Atrix and I have noticed that it lists under the "About Phone" section Dual Core 1.5Ghz.
Now I'd like to know which Kernel you guys would recommend I load?
This build of MIUI is running ICS 4.0.4 and I already have SetCPU installed but without the right kernel it won't let me go past 1GHz.
Cheers.
I have sorted myself out with the right Kernel from Jokersax.
As the MIUI is based on CM9, I went to the following page:
[ sorry can't post outside links... google jokersax cm9 atrix instead
And installed the cm9 1.3 v4 kernel under the "cwm flashables" section.
I did this by saving the zip to the SD card.
Rebooting into recovery mode, and then clearing the CACHE and DALVIK CACHE followed by flashing it to the desired kernel.
If you're going to try this, also put in the 1.0 V4 kernel onto the SD card at the same time as when you're copying the 1.3 v4 Kernel just incase the 1.3 kernel isn't stable.
If it isn't, you can simply reboot into recovery mode and reflash to the 1.0 kernel.
This thread can now be closed but may be useful for others searching for similar information.
What clock speed are you running at?
Hi Alex,
I'm running at 1.3GHZ all day no problems. Been running 1.3 now for over 48hours and battery life is good and no glitches / random reboots.
Under SetCPU it is set to range between 216MHZ and 1300MHZ.
I'm now using Kernel "Atrix-CM9-Kernel-025b-ext4-1.45GHz" which I have been running for about 24hrs and it is stable after countless benchmarks I have thrown at it.
This is with the CM9 MIUI 2.4.27 build I'm running.
Love it.
I went to download the revolution rom at http://forum.xda-developers.com/gal...m-android-revolution-hd-52-0-android-t1797334
The question is,is it possible to overclock/underclock? do i need other kernel for clocking to happen? did under/overclocking stuff comes with the rom.
Flash different kernal like boeffla download the boeffla config app from website in there you can underclock or over clock as well but here's a warning clocking is dangerous don't go above 1600