StreakDroid 2.0.0 ( aka GingerStreak ) Release Post
Official StreakDroid Website:StreakDroid.comhttp://streakdroid.com
A FACTORY RESET WILL BE NEEDED TO ALLOW THIS TO BOOT CORRECTLY DUE TO THE NUMBER OF CHANGES, SO BACKUP IS RECOMMENDED
( Disclaimer : As before, this ROM is heavily updated and still being developed at a fairly rapid pace. Bugs are listed below.)
2.0 > OVERVIEW/SUMMARY OF INSTALLATION PROCESS
1.Download Streakdroid5-2.0.zip from the links below
2.Boot into StreakMod or Clockwork Recovery
3.Select Update from Zip File > Select Zip File From SD Card > StreakDroid5-2.0.zip
4.Wait for installation.
5.First Boot may take longer than a normal boot. Things are being installed, stuff is being generated. Patience.
6.Enjoy.
Most Recent Version: v2.0.0
Known Issues:
Superuser seems to possibly have issues, cant seem to pin it down yet but seems that updating superuser from market helps for some.
GPS and 720p video REQUIRE the engineering baseband and dsp below to be flashed in fastboot.
Graphics performance is not as great as id like, still working on that though
-----------------
Changelogs
-----------------
UPDATE 22/05/2011
Version 2.0.0 AKA GingerStreak
* Based off Android 2.3.3 Gingerbread
* Added basic streakdroid apps
* Added Swype Back
* NO Adv. installer in this build and wont be for release either
* Basic optimizations done, no overclock on kernel as its prebuilt and i dont have a useful source for it
* Video Enabled Google Talk added, works Fairly well but DONT try to switch cameras or it will crash (bug of gtalk not the build)
* Latest 2.3 Google Apps from 07/03/2011
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
also please feel free to donate to my work if you find it useful - any amount is appreciated
GBP Donate | USD Donate
Rom Download Links:
Primary Download Site: http://mirror2.streakdroid.com/StreakDroid5-2.0.zip
THIS BASEBAND UPDATE IS REQUIRED FOR GPS AND SOME OTHER THINGS TO FUNCTION PROPERLY
its an engineering modified baseband that works better for 2.3
Baseband File Download:
Primary Download Site: http://mirror2.streakdroid.com/amss.mbn
THIS DSP FILE MUST ALSO BE UPDATED DUE TO CHANGED LIBRARIES IN 2.3
http://mirror2.streakdroid.com/dsp1.mbn
flash this using the fastboot command fastboot -i 0x413c flash dsp1 dsp1.mbn
Thanks to:
Everyone for suggesting things they want adding
ALL the BETA testers who put up with multiple screwed up builds and multiple dell logo freezes to get this working, couldn of done it without you all
everyone else for just jumping in and helping each other, thats the true community sprit that makes me do this sort of dev for android and not some other mobile os.
everyone else who helped/is helping
ALL THE TESTERS DESERVE HUGE THANKS FOR THEIR HELP EVERYONE !!
Certain other people who help me out hacking libs and files together
also please feel free to donate to my work if you find it useful - any amount is appreciated
GBP Donate | USD Donate
Thanks bro your the man. Seems to be really stable the only issue I have noticed so far are the one that you haze allready stated
Sent from my Dell Streak using XDA Premium App
Awsome! Will try now !
Hey Steve,
What's the command line to flash the baseband?
Sent from The SuperStreak!
Hey Steve,
What's the command to flash the baseband?
Sent from The SuperStreak!
fastboot -i 0x413c flash amss amss.mbn
Thanks
Sent from The SuperStreak!
little confused about the order for this. from what i gather i should
1.install zip with clockwork
2.factory reset
3. flash new baseband
4. flash new dsp
5. enjoy
is that about right?
also is this a factory reset "dell screen" or a factory reset from clockwork?
yep baseband + dsp can go any order really
Just donated. Much thanks Steve.
Hum... your StreakDroid Logo booting non-stop ?
first boot takes ages, also try running a factory reset from first dell screen
@ dj steve One problem, phone doesn't recognize headphones, i.e music still playing after insrting headphones into streak
I don't know someone notices in this???
hi dj steve my quadrant score is 1494 flashed everything as u said is this about right for the score by the way i love ur work
sorry for noob question
Will the streak in the USA (unlocked,factory, no at&t ) I have to change the baseband?
if you only installed by clockwork without changing the baseband
All works well except Bluetooth Voice dial
Hey Steve,
Great job!!!
Flashed rom, flashed baseband, flashed dsp1, factory reset.
All was working great except Blutoooth Voice dial force closes.
Nandroided back to 1.9.0 for now.
The baseband aftrer the nandroid restore is the new baseband ending in EVT3_GB_-US.
All is working though. What baseband is this based on? I was running 351 with no problems.
gonna try this now! Thanks steve. Can you PLEASEEEEEEE make a way to have the home menu and back buttons stay lit up?
still on boot up screen... 25 minutes
Factory Reset via Clockwork or Dell Menu
yeah i just did that a couple of min ago
Related
CyanogenMod is a free, community built distribution of Android 2.3 (Gingerbread) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* The CM team is not responsible for bricked devices, dead SD cards,
* thermonuclear war, you getting fired because the alarm app failed, or anything whatsoever.
* Please do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is an AOSP-based build with extra contributions from many people which you can use without any type of Google applications. I found a link from some other project that can be used to restore the Google parts, which can be found below or elsewhere in the thread. I've still included the various hardware-specific code, which seems to be slowly being open-sourced anyway.
Visit the CHANGELOG for a full list of changes and features!
All source code is available at the CyanogenMod Github!
If you'd like to to contribute to CyanogenMod, checkout our Gerrit instance.
INSTRUCTIONS:
- First time flashing CM 7 (or coming from another ROM)?
1. Unlock/root your device - http://forum.xda-developers.com/showthread.php?t=754020
2. Do a Nandroid backup!
3. Update your radio if necessary (use the latest posted by ChiefzReloaded)
4. WIPE
5. Install the ROM
5. Optionally install the Google Addon
- Upgrading from earlier CM7?
1. Do a Nandroid Backup!
2. Install the ROM (your Google apps will be backed up automatically)
HOW TO REPORT BUGS OR PROBLEMS?
- Was it a hard reboot? Get me the file "/proc/last_kmsg".
- Was it a soft reboot or a "boot loop"? Run "adb logcat" and get me the full output.
- Pastebin links preferred
- Please use the issue tracker whenever possible!
Please visit the CyanogenMod Wiki for step-by-step installation walkthroughs and tons of other useful information.
The preferred method of installation is via ROM Manager, or you can head over to the CM Forums for manual downloads.
Thank you to EVERYONE involved in helping with testing, coding, debugging and documenting! Enjoy!
Only thing I've noticed with the last 3 builds, including RC1, is that the CPU locks onto the max set frequency, but it could be a result of my at least 30+ nowipe flashes of nightlies from build 1 to now if the issue remains after wiping and flashing I'll report it on the issue tracker.
Thank you, it has been amazing watching your team build the nightlys for this. The ability to modify CPU without an additional app should win this rom an award as far as I am concerned. Once again thank you for the years of work your team has put into these roms on all devices.
Regards,
AMAZING EVERYTHING IS WORKING INCLUDEING WIFI !!! Ty For all you work.
Sent from my T-Mobile myTouch 3G Slide using XDA App
hoping that this has the fix 19 had for wifi
Virus1x said:
hoping that this has the fix 19 had for wifi
Click to expand...
Click to collapse
It should be based off of the latest source, which would mean that it includes all previous bugfixes and additions/modifications from the nightly builds. It should be working smoothly, although I still have to test to see if the max frequency locking issue is still there or not. It was in build 40 of the nightlies, but I'm going to wipe and flash RC1 and see if it still happens.
Thank you ...Amazing Work.
MusicMan374 said:
Only thing I've noticed with the last 3 builds, including RC1, is that the CPU locks onto the max set frequency, but it could be a result of my at least 30+ nowipe flashes of nightlies from build 1 to now if the issue remains after wiping and flashing I'll report it on the issue tracker.
Click to expand...
Click to collapse
Yeah, the RC1 build has the fix. Unfortunately the new librpc didn't play nice with our hacks for the proprietary GPS on the Slide.
Is the boot.img already modified for darktremor a2sd? I'd like to use that. Thanks!
In on 1st page!
Good Job Cyanogen
Smartass Cyanogen Kernel haha
Only Cyanogen can code better than Chucknorris
Wait the stock cyanogen kernel has a smartass governor? Well then there was absolutely no point to me installing miguel's smartass kernel oh well. I'll flash system back over itself with the mtd boot patcher and call it good, after restoring titanium.
Glad to hear the CPU issues were resolved, I can confirm, no more issues I guess I didn't have to wipe after all, but it was probably about time to anyway haha. And holy damn my signature is out of date.
I'm heartbroken..
guess I'm stuck on Nightly 19.
Rc1 looked so slick..
Well guess that sucks..
All of us with the CM6 WIFI error had working wifi with Nightly build 19 and RC1 broke it again..
thank-god for a backup..
PLEASE Cyanogen Fix the WIFI error for CM7.. I don't have 3G I depend on WIFI
Virus1x said:
I'm heartbroken..
guess I'm stuck on Nightly 19.
Rc1 looked so slick..
Well guess that sucks..
All of us with the CM6 WIFI error had working wifi with Nightly build 19 and RC1 broke it again..
thank-god for a backup..
PLEASE Cyanogen Fix the WIFI error for CM7.. I don't have 3G I depend on WIFI
Click to expand...
Click to collapse
This should work on CM7: http://forum.xda-developers.com/showthread.php?t=896963
also, does the boot.img have a2sd enabled?
pettigrew95 said:
This should work on CM7: http://forum.xda-developers.com/showthread.php?t=896963
also, does the boot.img have a2sd enabled?
Click to expand...
Click to collapse
everyone claims it breaks it but I'l try..
Virus1x said:
everyone claims it breaks it but I'l try..
Click to expand...
Click to collapse
That wifi fix worked beatifully for me
boot loop
Are you guys getting a boot loop??
I wiped, installed the rom, than the google addon. It gets to the sign in page but when I press on the android it boots back up to the boot animation.
whoisloon said:
Are you guys getting a boot loop??
I wiped, installed the rom, than the google addon. It gets to the sign in page but when I press on the android it boots back up to the boot animation.
Click to expand...
Click to collapse
Did you do a full wipe?
pettigrew95 said:
Did you do a full wipe?
Click to expand...
Click to collapse
Yea, I did a full wipe, Wiped system, boot, cache, and etc
whoisloon said:
Yea, I did a full wipe, Wiped system, boot, cache, and etc
Click to expand...
Click to collapse
Hmmm, I'm not sure then, sorry man.
pettigrew95 said:
that wifi fix worked beatifully for me
Click to expand...
Click to collapse
on cm7 rc1?
CyanogenMod is a free, community built distribution of Android 2.3.7 (Gingerbread) which greatly extends the capabilities of your phone.
This is a release candidate, but you should find it stable for everyday use.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Visit the CHANGELOG for a full list of changes and features!
All source code is available at the CyanogenMod Github! If you'd like to to contribute to CyanogenMod, checkout our Gerrit instance.
INSTRUCTIONS:
- First time flashing CM 7 to your phone (or coming from another ROM)?
1. Unlock/root your device and install Clockwork Recovery 3 via ROM Manager
2. Do a Nandroid backup!
3. WIPE
4. Install the ROM
5. Optionally install the Google Addon
- Upgrading from an earlier CM?
1. Do a Nandroid Backup!
2. Install the ROM (your Google apps will be backed up automatically)
HOW TO REPORT BUGS OR PROBLEMS?
- Was it a hard reboot? Get me the file "/proc/last_kmsg".
- Was it a soft reboot or a "boot loop"? Run "adb logcat" and get me the full output.
- Pastebin links preferred
- Please use the issue tracker whenever possible!
Please visit the CyanogenMod Wiki for step-by-step installation walkthroughs and tons of other useful information.
The preferred method of installation is via ROM Manager, or you can head over to the CM Forums for manual downloads.
Thank you to EVERYONE involved in helping with testing, coding, debugging and documenting! Enjoy!
Thank you, Sir!
Quick question, I ran through the change log, has the call delay being resolved in this build?
I accidentally hit post when I was kanging your post. Sorry boss.
Yup,
Both call delay and the wonk were fixed
S_Dot said:
Thank you, Sir!
Quick question, I ran through the change log, has the call delay being resolved in this build?
Click to expand...
Click to collapse
Please use thanks button instead of creating new post just to thanks OP.
Where did 7.1 RC go?
Has it been pulled?
EDIT: Sorry was in the wrong cyanogen forum....
link: http://download.cyanogenmod.com/get/update-cm-7.1.0-RC1-N1-signed.zip
imfloflo said:
Please use thanks button instead of creating new post just to thanks OP.
Click to expand...
Click to collapse
button thanks dont show with me o.0
BTW: i have a problem with Skype app, when i try login, my phone force reboot 2 times then everything work fine... anyone have it??? :|
Can accommodate the 7.1 720p video?
YAY!! thanks!!
Rotation issue
I've upgraded from 7.0.3 to 7.1RC1 and am noticing an issue. Twice now (within 3 hours), I've had the rotation lock to landscape only. It rotates between top/down landscape but won't go into portrait mode (except in apps that are locked to Portrait like LauncherPro). A reboot fixes it but it's quite annoying.
I did not wipe when I upgraded (other than Dalvik cache). Has anyone else had this issue?
Waiting for so long,and finally...
Thank you cyanogen !
Upgrade from 7.0.3 without a full wipe,
and working just fine so far!
Anksta said:
I've upgraded from 7.0.3 to 7.1RC1 and am noticing an issue. Twice now (within 3 hours), I've had the rotation lock to landscape only. It rotates between top/down landscape but won't go into portrait mode (except in apps that are locked to Portrait like LauncherPro). A reboot fixes it but it's quite annoying.
I did not wipe when I upgraded (other than Dalvik cache). Has anyone else had this issue?
Click to expand...
Click to collapse
You should probably do a full wipe coming from 7.0.3 -> 7.1RC1
edit: actually, probably NOT http://twitter.com/#!/cyanogen/statuses/85214357763530753 "yes, you can upgrade from 7.0 (or a nightly build) without a wipe."
zok-star said:
YAY!! thanks!!
Click to expand...
Click to collapse
tonyeva said:
Waiting for so long,
and finally...
Thank you cyanogen !
Click to expand...
Click to collapse
The thread is 1 page long and a moderator asked you in big bold red letters not to do this. Stop.
Anksta said:
I've upgraded from 7.0.3 to 7.1RC1 and am noticing an issue. Twice now (within 3 hours), I've had the rotation lock to landscape only. It rotates between top/down landscape but won't go into portrait mode (except in apps that are locked to Portrait like LauncherPro). A reboot fixes it but it's quite annoying.
I did not wipe when I upgraded (other than Dalvik cache). Has anyone else had this issue?
Click to expand...
Click to collapse
Check the '0 Degree' box in prefs
i'm surprised to find that a tiny UI glitch exists all the way down to CM7 RC1...
http://code.google.com/p/cyanogenmo...on Model Network Owner Summary Stars Priority
Anyone confirms?
as always... cm is great........
but i guess the speaker volume is decreased from froyo cm 6.x
is that already in the bug list?
hi guys... I come from Cyano 7.0.3.. I did full wipe before flashing this Stable 7.1 but I'm experiencing a bug which I had also in Nightlies.. My wifi disconnects randomly and then connects again after awhile.. why? what should I do to fix this issue?
gnlcp said:
hi guys... I come from Cyano 7.0.3.. I did full wipe before flashing this Stable 7.1 but I'm experiencing a bug which I had also in Nightlies.. My wifi disconnects randomly and then connects again after awhile.. why? what should I do to fix this issue?
Click to expand...
Click to collapse
I remember some say setting Wi-Fi Sleep Policy to "Never" will make things better
You may try
(my memory may be wrong though )
momomok said:
I remember some say setting Wi-Fi Sleep Policy to "Never" will make things better
You may try
(my memory may be wrong though )
Click to expand...
Click to collapse
Thanks for your advice, but I've already set "Never".. No improvment
gnlcp said:
Thanks for your advice, but I've already set "Never".. No improvment
Click to expand...
Click to collapse
what radio version are you on?
haksam said:
what radio version are you on?
Click to expand...
Click to collapse
32.41.00.32u_5.08.00.04
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (Kit Kat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Working:
Assuming everything.
Not Working:
Data is wonky.
Installation Instructions
Coming From Stock:
Download latest CM10.1 Nightly from here, CM11 ROM and 4.4.2 GApps zips from below and copy to sdcard.
Reboot to recovery
Make a backup of current ROM setup and Data YOUR DATA WILL BE WIPED
Flash CM10.1 zip
Flash CM11 zip. Follow next step carefully
You will get a partition layout error. Flash CM11 zip again
Zip install will fail with set_metadata_recursive: some changes failed
Reboot recovery from advanced menu. Notice recovery version CWM-based Recovery 6.0.6.4
Wipe Data/Factory Reset
Flash CM11 zip one last time
Flash GApps
Reboot
Coming From CM10.1:
Download CM11 ROM and 4.4.2 GApps zips from below and copy to sdcard.
Reboot to recovery
Make a backup of current ROM setup and Data YOUR DATA WILL BE WIPED
Flash CM11 zip. Follow next step carefully
You will get a partition layout error. Flash CM11 zip again
Zip install will fail with set_metadata_recursive: some changes failed
Reboot recovery from advanced menu. Notice recovery version CWM-based Recovery 6.0.6.4
Wipe Data/Factory Reset
Flash CM11 zip one last time
Flash GApps
Reboot
ROM Download:
CyanogenMod 11.0 2/20/14
md5: e832432b4268255b63d5507c8a639e99
CyanogenMod 11.0 1/9/14
md5: 7c937708189ba0112d6882d724a3a695
CyanogenMod 11.0 1/4/14
md5: b7df574c383a58fac360f5dc962c69c
GApps:
PA 4.4.2 Modular Mini GApps
ROM take a bit to boot. Be patient.
Credit to:
CyanogenMod
TeamHacksung
jt1134
Disclaimer: I will more than likely not be supporting this very actively. Just posting this to get it out there.
Also, I have not tested installation with TWRP, nor do I have the desire to. I have only tested with the convoluted CWM debacle listed above.
Enjoy!
TWRP Install Instructions:
nm3210 said:
boot into TWRP, clear cache, install this new CM11 1/4, reboot recovery, install CM11 1/4 again, install new gapps 4.4.2, reboot.
Click to expand...
Click to collapse
Changelog:
repo sync'd upstream changes.
merged FascinateRIL class from https://github.com/TeamRegular/andr...mmit/6678964eac6a9443adc85ef34dad0c2e76f30d58
times_infinity said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (Kit Kat), which is designed to increase performance and reliability over stock Android for your device.
ROM take a bit to boot. Be patient.
Credit to:
CyanogenMod
TeamHacksung
jt1134
Disclaimer: I will more than likely not be supporting this very actively. Just posting this to get it out there.
Also, I have not tested installation with TWRP, nor do I have the desire to. I have only tested with the convoluted CWM debacle listed above.
Enjoy!
Click to expand...
Click to collapse
... WOW that has come out of nowhere!!! :victory:
Thank you Mr. Infinity
We haven't seen you really around here in ages,,, but VERY much appreciated!!!!
.
Uneventful update from CM11 12/06 with TWRP, everything works well even without formating my data! It did replace TWRP with CWM 6.0.4.6, but whatever. My successful steps were as follows: boot into TWRP, clear cache, install this new CM11 1/4, reboot recovery, install CM11 1/4 again, install new gapps 4.4.2, reboot. 3G/Wifi work. Have not tested MMS, but I assume it works like it did on previous CM11 builds.
Transparency is disabled by default now (for everyone who's curious) because in the build.prop the "ro.config.low_ram" option is set to "true". You can set it to false to get transparency (and anything else that gets flagged as low-ram) back.
nm3210 said:
Uneventful update from CM11 12/06 with TWRP, everything works well even without formating my data! It did replace TWRP with CWM 6.0.4.6, but whatever. My successful steps were as follows: boot into TWRP, clear cache, install this new CM11 1/4, reboot recovery, install CM11 1/4 again, install new gapps 4.4.2, reboot. 3G/Wifi work. Have not tested MMS, but I assume it works like it did on previous CM11 builds.
Transparency is disabled by default now (for everyone who's curious) because in the build.prop the "ro.config.low_ram" option is set to "true". You can set it to false to get transparency (and anything else that gets flagged as low-ram) back.
Click to expand...
Click to collapse
Can't wait to play with this! This may actually make me update to kitkat on my fascinate! Thank you sir!
whoa I haven't seen you in a long time. welcome back and whoa cm11.
you thinking of making these official?
Sent from my SCH-I500 using xda app-developers app
Unfortunately data is borked and cycles on and off. I first dirty flashed and then did a complete wipe and no difference.
kb8no said:
Unfortunately data is borked and cycles on and off. I first dirty flashed and then did a complete wipe and no difference.
Click to expand...
Click to collapse
Yeah a day later I agree. You can quick toggle it to get it to work for a few minutes but it's not very consistent. Also, maybe it's the new WhisperPush or something, but I couldn't send or receive MMS at all. When receiving MMS, I would get a notification (both my SMS Popup and an actual notification) but there was no message in MMS.apk and it definitely never downloaded anything.
hi
whats the difference between this one and the the 12/06 cm 11.0 ? anyone know cause i coudnt get it to load i bricked twice.....thanks foor your hard work though nice...
hutchjim said:
whats the difference between this one and the the 12/06 cm 11.0 ? anyone know cause i coudnt get it to load i bricked twice.....thanks foor your hard work though nice...
Click to expand...
Click to collapse
This one is a smoother and if data was fixed I think it would be great. Data drops drove me off this in hours. No problems flashing. Maybe you got a bad download.
12/6 was rougher and data drop plagued as well so not a DD.
12/6 was all good for me. I used it for almost a month without a hitch. Data worked fine too for me. Just the urge of flashing something new took over and I tried DU5 but was put off by random reboots. So switched to cm 11 1/04. Happy with it till date. Off course data is flaky but will live with it until it's rectified.
Sent from my SCH-I500 using Tapatalk
new build is up guys.
hopefully it fixes data.
Enjoy!
Running this latest build without any tweaks since yesterday. Data is stable and so is the ROM. Great work. Thanks. :thumbup::thumbup::beer:
Sent from my SCH-I500 using Tapatalk
great work!
lots of updates going through for the device on BBQlog so still curious why the Fascinate isn't officially being updated anymore?
trajik78 said:
great work!
lots of updates going through for the device on BBQlog so still curious why the Fascinate isn't officially being updated anymore?
Click to expand...
Click to collapse
jt1134, the official CM maintainer for the fascinate and a couple other devices (OG Tab 7 CDMA i think), has either retired the fascinate or isn't on TeamDouche anymore.
the performance setting and ART not stick ~
A-L31 said:
the performance setting and ART not stick ~
Click to expand...
Click to collapse
You might try chainfires supersu
perf settings seem buggy though. even on du
Don't know in art..
hhp_211 said:
You might try chainfires supersu
perf settings seem buggy though. even on du
Don't know in art..
Click to expand...
Click to collapse
sorry, i just found out. i use xposed frameworks. after uninstall it everything i described above is false.
ART Working (takes time to boot, i almost inpatient i think i'm on bootloop :victory: )
Performance Stick at boot ~ :silly:
A-L31 said:
sorry, i just found out. i use xposed frameworks. after uninstall it everything i described above is false.
ART Working (takes time to boot, i almost inpatient i think i'm on bootloop :victory: )
Performance Stick at boot ~ :silly:
Click to expand...
Click to collapse
Good to know, thanks for the update
i can't install app to sd card.
when i restore with TiBu it stuck. when i'm download from app store it says Couldn't install on USB storage or SD Card.
is it something to do with ART or the ROM?
what i'm trying to install / restore is whatsapp wallpaper. it goes automatically to SD
anyone?
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Jmz A3UL Kernel
Instructions:
Download Zip
Flash zip in recovery
Profit
Download
Features:
Disable Write Protection
Many Many more to come
Changelog:
8-14-14
v1
----------------------------------------
First Release
Kernel Source: https://github.com/jmztaylor/android_kernel_htc_a3ul
Downloading now. You are the man!!
Edit: tested and working. Running Xposed modules now! Awesome!
Ey thanx JMZ!
The long awaited kernel!
But.
When I use the kernel I can not mount the external SD card anymore.
I can mount it in recovery, but not in Android.
I tested it on two seperate ROMs (the stock and the AT&T version) and both went bad after I installed the kernel.
The SD card isn't mounted at startup and when I try to mount it in Settings -> Storage it just tries to mount for a few seconds and stops trying.
Do you, or anyone, know how to fix this?
Anyone else who had this problem?
...and anyone got a backup of a stock european ROM of the Desire 610? ....kinda forgot to make one.
Cheers,
D.
DulinDuskhawk said:
Ey thanx JMZ!
The long awaited kernel!
But.
When I use the kernel I can not mount the external SD card anymore.
I can mount it in recovery, but not in Android.
I tested it on two seperate ROMs (the stock and the AT&T version) and both went bad after I installed the kernel.
The SD card isn't mounted at startup and when I try to munt it in Settings -> Storage it just tries to mount for a few seconds and stops trying.
Do you, or anyone, know how to fix this?
Anyone else who had this problem?
...and anyone got a backup of a stock european ROM of the Desire 610? ....kinda forgot to make one.
Cheers,
D.
Click to expand...
Click to collapse
Your sdcard is most likely exFAT. This one doesn't have the support for it. I will be releasing an update soon that will fix that issue
Can I install kernel on international desire 610.
boyan3010 said:
Can I install kernel on international desire 610.
Click to expand...
Click to collapse
Yes.
thanks
Does this kernel work with the US AT&T version of the Desire 610?
Thx.
Yes, I'm using it now.
Kernel v1 flashed just fine to my AT&T HTC Desire 610.
Problem now is that WiFi will not enable - it tries to turn on, but ultimately does not ever show as enabled.
Is there a particular firmware or firmware update that needs to go with this kernel?
Thx.
Clear your cache and dalvik cache in recovery and it should work.
I did a clear cache and clear dalvik prior to existing recovery after the kernel flash... But I will do again and see if that helps.
Thx
Clear them before flash and don't clear after lol. If that doesn't work, try clearing after also. One or the other works, had the same issue.
ClearD said:
Clear them before flash and don't clear after lol. If that doesn't work, try clearing after also. One or the other works, had the same issue.
Click to expand...
Click to collapse
I've tried both clear, flash, reboot... And clear, flash, clear, reboot... Wifi will not enable in either case.
Thoughts?
Sounds to me like a module issue, but I'm not sure how to solve it
I might be havin same problem. I flashed the kernel then cleared dalvik. Phone rebooted fine, WiFi connected then the phone died. It wouldnt boot. I hooked it to pc then rebooted recovery. Good thing I had a backup.
I did this because this whole time I've been rooted but without jmz. Didn't even know till someone told me where to check. I'm hoping there's a fix.
Are you guys at&t or international versions? I might have the updated boot image and modules for the 1.50 at&t update for you shortly
ClearD said:
Are you guys at&t or international versions? I might have the updated boot image and modules for the 1.50 at&t update for you shortly
Click to expand...
Click to collapse
I am AT&T... Phone was a prepackaged gophone unit which I then rooted
Gophone may make a difference
ClearD said:
Gophone may make a difference
Click to expand...
Click to collapse
What difference would it make ClearD? I also have a gophone...would this b the reason why the wifi doesn't work?
#include <std_disclaimer.h>
/*
* Your warranty is void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
Download: Link
- Works
Everything so far
- Doesn't work
You tell me
Source: https://github.com/Galaxya50
CLEAN FLASH :
Download the latest build and GApps
Reboot to recovery (has to be a custom recovery. TWRP, OrageFox, etc.)
Make a backup of ur data (Not Necessary)
Wipe Cache, Dalvik, System, Data (wiping internal storage is not necesary)
Flash the latest build
Flash Gapps
Reboot
DIRTY FLASH (may cause bugs. not recommended):
Download the latest build
Reboot to recovery
Flash the latest build
Flash Gapps
Wipe Cache
Reboot
Builder: Me
Awesome work !
Keep it up
Battery saving is amazing
rezabahramnezhad said:
Battery saving is amazing
Click to expand...
Click to collapse
Please add fod animations
rezabahramnezhad said:
Please add fod animations
Click to expand...
Click to collapse
will try if i have time
which gapps can i use on this rom? flamegapps and mindthegapps didnt work
TedFin said:
which gapps can i use on this rom? flamegapps and mindthegapps didnt work
Click to expand...
Click to collapse
try nikgapps
Scorpionkm469 said:
try nikgapps
Click to expand...
Click to collapse
it worked, thanks!
Scorpionkm469 said:
Download: Link
- Works
Everything so far
- Doesn't work
You tell me
Source: https://github.com/Galaxya50
CLEAN FLASH :
Download the latest build and GApps
Reboot to recovery (has to be a custom recovery. TWRP, OrageFox, etc.)
Make a backup of ur data (Not Necessary)
Wipe Cache, Dalvik, System, Data (wiping internal storage is not necesary)
Flash the latest build
Flash Gapps
Reboot
DIRTY FLASH (may cause bugs. not recommended):
Download the latest build
Reboot to recovery
Flash the latest build
Flash Gapps
Wipe Cache
Reboot
Builder: Me
Click to expand...
Click to collapse
Can I flash it on my Samsung A505f device?
Shuvops said:
Can I flash it on my Samsung A505f device?
Click to expand...
Click to collapse
yes
Please help. My a50 is bugging out every time I turn it on the screen just dims and dims until the screen is just off. The touch screen works because I can turn on the flashlight etc but I can't see anything on the screen, I'm using crdroid 8.9
It's happened twice already. If I let it go on stand by with NO activity for a few hours it will then start working again and that's a pretty big inconvenience when it stops working
This hasn't happened any other time with other ROMs than crdroid
And I really dont wanna switch ROMs either before I get my other phone fixed because this is a rom I like
This always happens when I restart the phone. Not always when I restart it but sometimes
Like now when I let it stay off the night not on the charger in the morning (now) it started working again
TedFin said:
Please help. My a50 is bugging out every time I turn it on the screen just dims and dims until the screen is just off. The touch screen works because I can turn on the flashlight etc but I can't see anything on the screen, I'm using crdroid 8.9
It's happened twice already. If I let it go on stand by with NO activity for a few hours it will then start working again and that's a pretty big inconvenience when it stops working
This hasn't happened any other time with other ROMs than crdroid
And I really dont wanna switch ROMs either before I get my other phone fixed because this is a rom I like
This always happens when I restart the phone. Not always when I restart it but sometimes
Like now when I let it stay off the night not on the charger in the morning (now) it started working again
Click to expand...
Click to collapse
huh, thats strange, might be hardware but im not 100% sure since u said its not happening on other roms. i havent had any issues with crd in these few weeks that ive been using it. can you try LOS19.1 that i built and see if it happens with it as well? u can comment on that post if it does
Hi.
This is a great rom, all features that I want from pixel and battery nearly identical to stock.
I think this is known issue, but Bluetooth audio,as in calls via headset,are NOT working. I went into telegram groups but couldn't find any working solution,I already tried to disable wifi but still not working. Could you please offer any advice or at least put it in known bugs?
Thanks.
keymanjg said:
Hi.
This is a great rom, all features that I want from pixel and battery nearly identical to stock.
I think this is known issue, but Bluetooth audio,as in calls via headset,are NOT working. I went into telegram groups but couldn't find any working solution,I already tried to disable wifi but still not working. Could you please offer any advice or at least put it in known bugs?
Thanks.
Click to expand...
Click to collapse
cant say, i didnt try bluetooth but ik its not working on some roms. dunno a fix to it, ill ask around and try to find a fix for bt calls not working. thx for pointing it out
Do I have to install Android 12 stock firmware on A505f before installing this?
If so then where can I find it?
cir.s72 said:
Do I have to install Android 12 stock firmware on A505f before installing this?
If so then where can I find it?
Click to expand...
Click to collapse
there isnt stock firmware a12 for a505. and no, u can just flash it as usual
Works great thanks
just a reminder that crdroid version 8.10 is available
crDroid.net - crDroid 8.10 released and crDroid 9 updates
October 2022 security patches merged and crDroid 9 development progress
crdroid.net
I have a wifi problem. When I try to connect to my private wifi it instantly just turns off wifi. Mobile Data works without problems. I dont know if I did anything wrong, I also did the advanced wipe in orangefox recovery(which comes with magisk). Then I installed the rom and nikgapps core + androidauto addon (nikgapps-SL android12.1). And then rebooted to recovery -> and rom started successfully.
I always used the stock rom with root so I cant really tell whats the issue here.
Model: SM-A505FN
Also thanks for your effort to make this rom work
EDIT: I did the same steps but this time I booted to system instead of recovery and it worked.
RequestFX said:
I have a wifi problem. When I try to connect to my private wifi it instantly just turns off wifi. Mobile Data works without problems. I dont know if I did anything wrong, I also did the advanced wipe in orangefox recovery(which comes with magisk). Then I installed the rom and nikgapps core + androidauto addon (nikgapps-SL android12.1). And then rebooted to recovery -> and rom started successfully.
I always used the stock rom with root so I cant really tell whats the issue here.
Model: SM-A505FN
Also thanks for your effort to make this rom work
EDIT: I did the same steps but this time I booted to system instead of recovery and it worked.
Click to expand...
Click to collapse
i experienced some wifi issues as well, dont know whats causing it but usually a reboot fixes it