When I plug my phone into my Mac via USB I get a "Modem detected" message come up and an item appear in my Network Settings panel. Does anyone know the number, account name and password I need to connect via o2?
*99#
Will get on my mac pro later and check, think that will do it for you. Will change this later if I'm wrong
Great thanks mate
dabeeeenster said:
Great thanks mate
Click to expand...
Click to collapse
or you could try *99# and post back if it works
lol good point will get some work done then try it out
No that doesn't work. Just tries to connect then fails. If I put the phone in USB tether mode the network device disappears from the Network Panel.
You using correct user and pass? o2web and password I think
Sent from my GT-I9100 using XDA Premium App
no that doesn't work either
Usb debug mode?
Sent from my GT-I9100 using XDA Premium App
Yes I have that enabled
Will have a go myself on macbook pro, gimme 20 or so
Sent from my GT-I9100 using XDA Premium App
Appears 2.3 doesnt like osx, linux and win7 are ok, if you go to tethering and press help, says the same thing I will have a play later
Sent from my GT-I9100 using XDA Premium App
Related
Is there any way to assign a fixed ip instead of getting it by dhcp? I looked into wireless/advanced like in galaxy s2 but no luck.
Thank you
Sent from my GT-I9100 using XDA App
Yes there is but its almost hidden. You have to touch and hold which ever wifi network you want to access. A menu will popup with the option to Modify network config.
If you tell us the make and model of your router I'm sure someone will walk you through the process. I have my tab on a fixed IP as well.
Sent from my SGH-T959 using XDA App
Thank you, it was holding the wifi network.
I wanted to set it in my tablet, not via router. I already know how to assign it with router. Thank you anyway.
Sent from my GT-I9100 using XDA App
I am sorry to start a new a thread but for more than 2 hours trying to do this and no luck.
I have an X10a that for some reason is stuck on the Sony Ericsson logo anyway i have been trying to flash it using x10 flash tool but every time i get to where it says press back button and connect usb it just wont work it does not recognize its connected i have Win7 64 BIT. PLEASE HELP
Please help
Try taking the battery out hold back button plug in cable then put battery back in
Sent from my X10i using XDA Premium App
Tried no luck
There is an option under help i think that is called check driver or similar. Only if every driver is installed it works. If not make sure that you installed the driver from the driver dir. Also unpack the three archives, cause there are the hsusb driver.
Next time use the right section!
Sent from my X10 using xda premium
punkkeks said:
There is an option under help i think that is called check driver or similar. Only if every driver is installed it works. If not make sure that you installed the driver from the driver sir. Also unpack the three archives cause there are the hsusb driver.
Next time use the right section!
Sent from my X10 using xda premium
Click to expand...
Click to collapse
Where i cant and dont know where the help option?
OH I SEE CLICKED ON IT NOTHING HAPPENED
Then search it! There is an option in flashtool that will check your drivers. I wont make everything for you. If you don't know what you are doing, leave it!
Make a screenshot
Sent from my X10 using xda premium
punkkeks said:
Then search it! There is an option in flashtool that will check your drivers. I wont make everything for you. If you don't know what you are doing, leave it!
Make a screenshot
Sent from my X10 using xda premium
Click to expand...
Click to collapse
I did nothing happened i use to know how to do this and did it so much times before but after my COMA things haven't been easy.
Thank u for the advice i am not asking you to do everything for me
Alright. You plug in your device in flash mode and then click check drivers quick before the mode ends. Three lines should appear.
Also you have to check under your device manager if there are 3 semc devices. Make screenies and then we will se
Sent from my X10 using xda premium
punkkeks said:
Alright. You plug in your device in flash mode and then click check drivers quick before the mode ends. Three lines should appear.
Also you have to check under your device manager if there are 3 semc devices. Make screenies and then we will se
Sent from my X10 using xda premium
Click to expand...
Click to collapse
Thank you Sir but under device manager i dont have of the semc devices
I'm not a sir I'm just a guy from Germany. If you plug in your device, do you hear the plug sound from windows?
Sent from my X10 using xda premium
punkkeks said:
I'm not a sir I'm just a guy from Germany. If you plug in your device, do you hear the plug sound from windows?
Sent from my X10 using xda premium
Click to expand...
Click to collapse
No i dont i believe the issue is a USB driver
Bad. Try another USB port and if windows asks use the driver from the archives
Sent from my X10 using xda premium
punkkeks said:
Bad. Try another USB port and if windows asks use the driver from the archives
Sent from my X10 using xda premium
Click to expand...
Click to collapse
I did i even tried another PC
Use another USB cable and make sure that your USB port from your device is alright
Sent from my X10 using xda premium
punkkeks said:
Use another USB cable and make sure that your USB port from your device is alright
Sent from my X10 using xda premium
Click to expand...
Click to collapse
OK thanks.
Thank you very much man i appreciate it its flashing now all i had to do is change the usb cable
That's Murphy's law have fun
Sent from my X10 using xda premium
Why my phone doesnt show any notification when i connect usb.
I cant connect my sd card storage to pc, because there maybe a phone problem.
Sent from my MT15i using XDA Premium App
Since when?
In MTP mode or MSC mode?
Since i reflashed custom system files, but i reflashed to stock again, but it doesnt work.
Maybe something in system?
Phone showing that he chargeing, but usb promt doesnt showing in statusbar.
Sent from my MT15i using XDA Premium App
Oh, sorry for bad english.
Sent from my MT15i using XDA Premium App
When I plug the USB cable into the XPERIA NEO phone and then into the PC the Mount option in
the notifications never shows up. The usb cable
is fine because it does charge and the drive icon
shows up in the PC, however, when I click on
the drive it says please connect the drive. If I
pull down the notification bar it isn't recognizing
the usb as being plugged in / doesn't provide the
option to mount / unmount the device. If I go
into application settings and then development i
can select the usb debugging and when i
connect there it brings up the popup that asks if
you want to allow or not, if I select yes it does
say usb debugging connected, but again,
nothing shows up in the notification bar to
actually mount the device to the computer. The
phone was reset to "factory settings" already
and there's nothing on it apart from what came
with it right now. How do I get to mount it to
the PC and get the mount notification back in
the notifications drop down??
settings->Sony Ericsson->Connectivity:
check what is set under "USB connection mode", and if it's set "Mass storage mode(MSC)" check if you marked "Auto connect on MSC"
Hm, but even then you should get a message in notification bar
Nothing helps..
My sd card working in other phone, in same usb port with same usb wire.
Sent from my MT15i using XDA Premium App
And have you tried to connect your phone to other PC?
Yap, i tried connect my phone to other pc.
Sent from my MT15i using XDA Premium App
Did you install the Ubuntu App by any chance ?
I did and same yay broke lol
Sent from my MT15i using Tapatalk
kormatoes said:
I did and same yay broke lol
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
Managed to fix it ??
Keep trying to use FlastTool
Required me to try like 25-30 time :O
Try different Data cables :/
Or do a factory Reset in CWM, it will get rid of the ububtu apps and drivers
Ok, all story
I installed custom zip, who broke my phone.
Reflashed phone to 2.3.3 with flashtool
Connected usb to pc, sd card working great.
I restored my backup 2.3.4 via cwm.
And thats all, usb doesnt work.
That cwm backup i made long time ago.
Sent from my MT15i using XDA Premium App
Clear everything (factory reset) and reflash "properly"... backing up or restoring an OS or ROM is not a great idea, integrity wise.
Agreed, since your USB working now, flash a clean firmware
Ok, i try this
Sent from my MT15i using XDA Premium App
Doesnt help
Sent from my MT15i using XDA Premium App
Why did'nt it work ??
Use flashtool
Yep, iam useing flashtool
Sent from my MT15i using XDA Premium App
Every time i connect my galaxy player 4.0 (US) i connect it to use as storage mass and it disconnects alot and i have to reboot phone so it wont disconnect again anyone know why this happens and how to fix it??
Sent from my GT-I9000 using XDA
Need help on this
Sent from my GT-I9000 using XDA
I had that prob. when i did hold it in my hand, so just dont touch it. It worked for me.
Remember if your new to this you have connection settings under "Wireless and Network"
Try to use Airdroid, it's on the Market.
sindrefs said:
I had that prob. when i did hold it in my hand, so just dont touch it. It worked for me.
Remember if your new to this you have connection settings under "Wireless and Network"
Click to expand...
Click to collapse
I leave it alone and i have it on storage but it still happens
Sent from my GT-I9000 using XDA
SirRhor said:
Try to use Airdroid, it's on the Market.
Click to expand...
Click to collapse
Thanks but i dont want "over the air sync" i want to use the usb
Sent from my GT-I9000 using XDA
Hi. I'm sorry if this is in the wrong place.
I have an Archos 70 xenon tablet (uk) It's an ex display model and the demo mode is on there.
I've tried holding volume up and power and I can get to recovery. But im unable to select anything while in recovery.
Tried to connect it to laptop but my pic can't see it obviously. I also tried downloading the firmware from archos website and putting it on a micro sd. But this also does nothing as it's on demo mode.
Any help/advice please?
Nobody?
Sent from my SM-G920F using XDA Free mobile app
Forgot to add. I can't enable usb debuging.
Has this thing any hope?
Sent from my SM-G920F using XDA Free mobile app
bigmadpete said:
Forgot to add. I can't enable usb debuging.
Has this thing any hope?
Sent from my SM-G920F using XDA Free mobile app
Click to expand...
Click to collapse
usually this is resolved by an OTA update. Have you tried that?
sotosgolf said:
usually this is resolved by an OTA update. Have you tried that?
Click to expand...
Click to collapse
Hi, I had no luck with it I'm afraid, see another 2 with the same problem.
bigmadpete said:
Forgot to add. I can't enable usb debuging.
Has this thing any hope?
Sent from my SM-G920F using XDA Free mobile app
Click to expand...
Click to collapse
if you can access the settings, go to security, and look if Demo is checked on, on administators.
Dont know if it would work but try to open the phone app and dial *#7780#*#* and see what happens. Its Supposed to factory reset the phone.