I am sorry to start a new a thread but for more than 2 hours trying to do this and no luck.
I have an X10a that for some reason is stuck on the Sony Ericsson logo anyway i have been trying to flash it using x10 flash tool but every time i get to where it says press back button and connect usb it just wont work it does not recognize its connected i have Win7 64 BIT. PLEASE HELP
Please help
Try taking the battery out hold back button plug in cable then put battery back in
Sent from my X10i using XDA Premium App
Tried no luck
There is an option under help i think that is called check driver or similar. Only if every driver is installed it works. If not make sure that you installed the driver from the driver dir. Also unpack the three archives, cause there are the hsusb driver.
Next time use the right section!
Sent from my X10 using xda premium
punkkeks said:
There is an option under help i think that is called check driver or similar. Only if every driver is installed it works. If not make sure that you installed the driver from the driver sir. Also unpack the three archives cause there are the hsusb driver.
Next time use the right section!
Sent from my X10 using xda premium
Click to expand...
Click to collapse
Where i cant and dont know where the help option?
OH I SEE CLICKED ON IT NOTHING HAPPENED
Then search it! There is an option in flashtool that will check your drivers. I wont make everything for you. If you don't know what you are doing, leave it!
Make a screenshot
Sent from my X10 using xda premium
punkkeks said:
Then search it! There is an option in flashtool that will check your drivers. I wont make everything for you. If you don't know what you are doing, leave it!
Make a screenshot
Sent from my X10 using xda premium
Click to expand...
Click to collapse
I did nothing happened i use to know how to do this and did it so much times before but after my COMA things haven't been easy.
Thank u for the advice i am not asking you to do everything for me
Alright. You plug in your device in flash mode and then click check drivers quick before the mode ends. Three lines should appear.
Also you have to check under your device manager if there are 3 semc devices. Make screenies and then we will se
Sent from my X10 using xda premium
punkkeks said:
Alright. You plug in your device in flash mode and then click check drivers quick before the mode ends. Three lines should appear.
Also you have to check under your device manager if there are 3 semc devices. Make screenies and then we will se
Sent from my X10 using xda premium
Click to expand...
Click to collapse
Thank you Sir but under device manager i dont have of the semc devices
I'm not a sir I'm just a guy from Germany. If you plug in your device, do you hear the plug sound from windows?
Sent from my X10 using xda premium
punkkeks said:
I'm not a sir I'm just a guy from Germany. If you plug in your device, do you hear the plug sound from windows?
Sent from my X10 using xda premium
Click to expand...
Click to collapse
No i dont i believe the issue is a USB driver
Bad. Try another USB port and if windows asks use the driver from the archives
Sent from my X10 using xda premium
punkkeks said:
Bad. Try another USB port and if windows asks use the driver from the archives
Sent from my X10 using xda premium
Click to expand...
Click to collapse
I did i even tried another PC
Use another USB cable and make sure that your USB port from your device is alright
Sent from my X10 using xda premium
punkkeks said:
Use another USB cable and make sure that your USB port from your device is alright
Sent from my X10 using xda premium
Click to expand...
Click to collapse
OK thanks.
Thank you very much man i appreciate it its flashing now all i had to do is change the usb cable
That's Murphy's law have fun
Sent from my X10 using xda premium
Related
I really need help my phone when i plug it into my pc to charge it because i lost my charger well a message pop up in my computer and says it doesnt recognize it how can i make it recognize it? and my phone battery is dead do i need to update drivers? how can i do so? please heeeelp
Have you tried installing seus to get driver for your phone
Sent from my X10i using XDA Premium App
-- X10B -- said:
Have you tried installing seus to get driver for your phone
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
i already have seus on my pc just updated it and how can i do it?
Sometimes using front pc usb doesnt detect the phone, have you tried using main usb ports on your pc ( back ). If fails try restarting your pc.
Sent from my X10i using XDA Premium App
-- X10B -- said:
Sometimes using front pc usb doesnt detect the phone, have you tried using main usb ports on your pc ( back ). If fails try restarting your pc.
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
screw it mate i accidently uninstalled the drives and my phone doesnt have enough charge to reinstall it im getting a new charger tomorrow morning first thing to do in my so busy day but thanks anyways for willing to help its really appreciated
I changed my usb cable and it fixed it, if that helps
sent from my X10 using my wicked awesome premium xda app
When I plug my phone into my Mac via USB I get a "Modem detected" message come up and an item appear in my Network Settings panel. Does anyone know the number, account name and password I need to connect via o2?
*99#
Will get on my mac pro later and check, think that will do it for you. Will change this later if I'm wrong
Great thanks mate
dabeeeenster said:
Great thanks mate
Click to expand...
Click to collapse
or you could try *99# and post back if it works
lol good point will get some work done then try it out
No that doesn't work. Just tries to connect then fails. If I put the phone in USB tether mode the network device disappears from the Network Panel.
You using correct user and pass? o2web and password I think
Sent from my GT-I9100 using XDA Premium App
no that doesn't work either
Usb debug mode?
Sent from my GT-I9100 using XDA Premium App
Yes I have that enabled
Will have a go myself on macbook pro, gimme 20 or so
Sent from my GT-I9100 using XDA Premium App
Appears 2.3 doesnt like osx, linux and win7 are ok, if you go to tethering and press help, says the same thing I will have a play later
Sent from my GT-I9100 using XDA Premium App
Why my phone doesnt show any notification when i connect usb.
I cant connect my sd card storage to pc, because there maybe a phone problem.
Sent from my MT15i using XDA Premium App
Since when?
In MTP mode or MSC mode?
Since i reflashed custom system files, but i reflashed to stock again, but it doesnt work.
Maybe something in system?
Phone showing that he chargeing, but usb promt doesnt showing in statusbar.
Sent from my MT15i using XDA Premium App
Oh, sorry for bad english.
Sent from my MT15i using XDA Premium App
When I plug the USB cable into the XPERIA NEO phone and then into the PC the Mount option in
the notifications never shows up. The usb cable
is fine because it does charge and the drive icon
shows up in the PC, however, when I click on
the drive it says please connect the drive. If I
pull down the notification bar it isn't recognizing
the usb as being plugged in / doesn't provide the
option to mount / unmount the device. If I go
into application settings and then development i
can select the usb debugging and when i
connect there it brings up the popup that asks if
you want to allow or not, if I select yes it does
say usb debugging connected, but again,
nothing shows up in the notification bar to
actually mount the device to the computer. The
phone was reset to "factory settings" already
and there's nothing on it apart from what came
with it right now. How do I get to mount it to
the PC and get the mount notification back in
the notifications drop down??
settings->Sony Ericsson->Connectivity:
check what is set under "USB connection mode", and if it's set "Mass storage mode(MSC)" check if you marked "Auto connect on MSC"
Hm, but even then you should get a message in notification bar
Nothing helps..
My sd card working in other phone, in same usb port with same usb wire.
Sent from my MT15i using XDA Premium App
And have you tried to connect your phone to other PC?
Yap, i tried connect my phone to other pc.
Sent from my MT15i using XDA Premium App
Did you install the Ubuntu App by any chance ?
I did and same yay broke lol
Sent from my MT15i using Tapatalk
kormatoes said:
I did and same yay broke lol
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
Managed to fix it ??
Keep trying to use FlastTool
Required me to try like 25-30 time :O
Try different Data cables :/
Or do a factory Reset in CWM, it will get rid of the ububtu apps and drivers
Ok, all story
I installed custom zip, who broke my phone.
Reflashed phone to 2.3.3 with flashtool
Connected usb to pc, sd card working great.
I restored my backup 2.3.4 via cwm.
And thats all, usb doesnt work.
That cwm backup i made long time ago.
Sent from my MT15i using XDA Premium App
Clear everything (factory reset) and reflash "properly"... backing up or restoring an OS or ROM is not a great idea, integrity wise.
Agreed, since your USB working now, flash a clean firmware
Ok, i try this
Sent from my MT15i using XDA Premium App
Doesnt help
Sent from my MT15i using XDA Premium App
Why did'nt it work ??
Use flashtool
Yep, iam useing flashtool
Sent from my MT15i using XDA Premium App
Hey guys, I've got a problem where my phone isn't recognized by my computer when I connect it. It was working just fine a while ago and I didn't modify anything except copy over a few files the last time I connected it into the computer.
I'm on CM9 if that helps with anything, and I don't know what else to say but if you need more information I'll be more than happy to provide it for you.
Thanks
Try changing version specific modem.... Look for cell... Ty
Sent from my GT-I9100 using xda premium
Their are more then 1 reasons for your problem:-
Try to clean your gs2 USB port.
Try to insert cable in different PC USB port.
Try with a different USB cable.
and last thing if all upper things not work then change your rom with full wipe
Sent from my GT-I9100 using Tapatalk 2
Did you reinstall the drivers on the PC . As I had this issue driver reinstall also check antivirus isn't disabling driver install / auto run
Sent from my GT-I9100 using xda app-developers app
Nishu_gamer said:
Their are more then 1 reasons for your problem:-
Try to clean your gs2 USB port.
Try to insert cable in different PC USB port.
Try with a different USB cable.
and last thing if all upper things not work then change your rom with full wipe
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
How can i clean my gs2 usb port ?
I hane no problem with usb cable. I.m using it at a lot of other devices... And no problems.
Sent from my GT-I9100 using XDA Premium HD app
Hey lads mI'm trying to root my archos 97 carbon using the archtab.com website... I dont know how to flash I read instructions but its confusing... I put my paperclip in reset hole and pressed on home button but nothing happened and my tab is off when I'm doing it because it says to... Plz help me
found out thats its the same as recovery mode... i pressed the volume+ button and power button at the same time but nothing happened plz help...
From what I read at arctablet.com,
Only insert the paperclip in the reset pinhole and press the home button.
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
Claxc Designs said:
From what I read at arctablet.com,
Only insert the paperclip in the reset pinhole and press the home button.
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
i tried tht and nothing happened
bublz654 said:
i tried tht and nothing happened
Click to expand...
Click to collapse
Try to do that + plug the USB cable.
Did you read at this website : http://www.arctablet.com/blog/featured/flashing-arnova-g2-rockchip-2918-rockchip-flashing-tool/
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
i did read that at the website but didnt know when to plug the usb cable... just did it nope nothing
bublz654 said:
i did read that at the website but didnt know when to plug the usb cable... just did it nope nothing
Click to expand...
Click to collapse
It looks like didn't work . . But, you should read the comments from the link above.
And watch the video http://www.arctablet.com/blog/featu...firmware-root-2gb-space-apps-arnova-9-g3-too/
(Since Arnova 9 G3 had the same method with the Archos 97 Carbon).
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
do i have to have the device on or off ?
bublz654 said:
do i have to have the device on or off ?
Click to expand...
Click to collapse
Read it on "Flashing your Arnova G2, Arnova G3, Rockchip RK29xx/RK30xx based tablet with Rockchip flashing tool"
Number 1 : Shutdown the tablet, you may want to wait for a few seconds to make sure it does not restart
Then do the above reply from insert a paperclip in the Reset pinhole of the tablet and press the Home button + plug the USB cable.
Wait for it to detect on the computer (make sure you installed the driver).
And then read carefully & watch the video.
Hope it helps you
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
Claxc Designs said:
Read it on "Flashing your Arnova G2, Arnova G3, Rockchip RK29xx/RK30xx based tablet with Rockchip flashing tool"
Number 1 : Shutdown the tablet, you may want to wait for a few seconds to make sure it does not restart
Then do the above reply from insert a paperclip in the Reset pinhole of the tablet and press the Home button + plug the USB cable.
Wait for it to detect on the computer (make sure you installed the driver).
And then read carefully & watch the video.
Hope it helps you
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
I just dunno how can i do it i tried everything but nope
Sent from my LG-E400 using xda app-developers app
The steps were very clear, though.
I've done my best to help.
Sent from my Xperia Arc S using xda premium
Claxc Designs said:
The steps were very clear, though.
I've done my best to help.
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
I know they are very clear but i just can't seem to manage it
Sent from my LG-E400 using xda app-developers app
As you can see in the comments, they seem to manage it.
But here's a thing that you must first read carefully, try to understand it, then try that step by step.
If you seem can't to manage it, maybe a friend near you can help. So it will be easier to do.
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
Claxc Designs said:
As you can see in the comments, they seem to manage it.
But here's a thing that you must first read carefully, try to understand it, then try that step by step.
If you seem can't to manage it, maybe a friend near you can help. So it will be easier to do.
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
Ill find someone
Sent from my LG-E400 using xda app-developers app
I fail because my win 10 lap doesn't find the RK29 drivers....is there any possibility to manage it that it will run on my computer? are there any driver available?