Hi there he is my problem I have a ATT Motorola Atrix which is running version 4.1.57.mb860.att.en.us I cant flash the telstra SBF nor the retail SBF it gets to re-enumeration then after about 2 minutes says flash failed i can install backups off the sd card fine but not through RSD LITE i have tried version 5.0 and version 5.3.1 with no success would anyone have a backup of the telstra sbf so i can install it from my sd card?
Why 2 posts in the wrong section with basically the same wording :S
Sent from my GT-I9100 using XDA Premium App
Bring on Mr. Clown! Is there a Clown Signal??
Related
I can get RSD to see my phone while on but when i go to flash gives me error chipset unsupported 53. Does 2.3 use different drivers for the chipset how do i downgrade.
FYI i did look for another thread but i didnt see anything to help me.
I just dont wanna flash and brick it becuase i cant get RSD to see my phone on boot??? But Works on windows I have used RSD a hundred times to flash, O Also I HAVE to be in MOTO portal for RSD to see phone.
You can just flash stock 1.26 with rad cause that is what I did. Got error first time them it worked second time.
Sent from my MB860 using Tapatalk
RSD***
10 char
Sent from my MB860 using Tapatalk
Use the 1.83 custom sbf in the dev forums that is a custom 1.83 that has the unlock sbf and preinstall root already built into the sbf. I think there's a link to it in the edible pudding thread
Sent from my MB860 using XDA App
Great thanks I was going nuts I need my stock to trade phone in for new one this screen is being weird ever since I got it half the time won't see my finger print then others work fine. Once again ty
AT&T ATRIX - VERSION 2.3.4 ROOTED BL UNLOCKED
Hi,
I am not happy with the ROMs out there of 2.3.4 so i am trying to get back to stock 2.2.2. Any thing i should be careful of ? (i have unlocked bootloader and Unlocked CWM installed)
I am planning to download SBF and flashing it using RSD Lite 5.3.1
I have Bell Atrix (and installed International SBF before all the times)
Make sure to download the correct SBF. It should say "1.8.3 Pudding" or something like that. But, honestly I think you would be better off on gingerbread there are so much more features than froyo.
i think u will brick when u go flash sbf again.
I've seen posts bout it and u should stay with the unlocked sbf.
Sent from my MB860 using Forum Runner
R3wt3d said:
i think u will brick when u go flash sbf again.
I've seen posts bout it and u should stay with the unlocked sbf.
Sent from my MB860 using Forum Runner
Click to expand...
Click to collapse
I only herd that if i have ATT Atrix and did OTA Update to 4.5.9.1 or some thing and try to flash back to froyo, only thin ill brick my phone. there is no warning about international phones going back and getting bricked.
Need Help plz
I flashed Branding: Retail UAE Version: 4.8.0 Service
Andd i am stuck with boot loop.
RED LED is on on ever reboot. Phone dont pass rippling Motorola logo
Any thoughts ?
I am flshing Bell/International Unlock SBF again and see what happens.
Phone is rebooting
No use Red Led is not leaving me alone. And unable to boot, stuck with boot loop
I got Back the Unlocked Sight in the boot screen and no i am flashing back the CWM recover via fastboot (for Unlocked)
And try to install zip of CharryBlur 1.4b
Fingers crossed.
Well every thing looks Norman, No Hard or Soft Brick at all
Or may be when u get bootloop its called soft brick.
so u back to 2.2.2?
what did u do for fixing softbrick?
I want to reflash sbf as my boot screen looks weird...
Sent from my MBed ME860 using Forum Runner
Like i said i was unable to boot into froyo at all bootloop so i flashed pudding for international users and got th Unlocked bootloader back and flashed CWM Recovery and then flashed Alien ROM from there.
I was unable to SBF flash Back.
If u want to go back i have found some usefull links.
http://forum.xda-developers.com/showthread.php?t=1163009
Try this if u must.
And with my experience DO NOT SBF FLASH ANY THING USING RSD Lite, ONLY USE IT IF UR LIFE DEPENDS ON IT.
xateeq said:
Hi,
I am not happy with the ROMs out there of 2.3.4 so i am trying to get back to stock 2.2.2. Any thing i should be careful of ? (i have unlocked bootloader and Unlocked CWM installed)
I am planning to download SBF and flashing it using RSD Lite 5.3.1
I have Bell Atrix (and installed International SBF before all the times)
Click to expand...
Click to collapse
try to get fruitcake here to rollback to 2.2.2
http://forum.xda-developers.com/showthread.php?t=1163009
Need help! I tried running through the steps to install pre-rooted gingerbread on my dx2 and everything was going well till the reboot, now the phone won't get past the motorola M "dual core" screen. I can get back to stock recovery, I've tried wiping the phone but no dice, so I've sbf-ed back to froyo through RSD lite and then the phone starts up fine. Tried installing pre-rooted GB three times and it always ends the same :-( Probably just being a moe.ron but I have no idea what else to try. Thanks in advance for anyone taking the time to try and help!
-desperately wanting rooted gingerbread
Sbf to gingerbread and find the thread on one click gingerbread root method.
Sent from my DROID X2 using XDA App
Gotta root froyo, then use the bootstrap to install that file. Now that we have the sbf for gingerbread and the one click root...you don't have to go to froyo and take all those unnecessary steps, just flash the gingerbread sbf. Just make sure you wipe data before the sbf...it usually eliminates a bootloop.
Sent from my DROID X2 using XDA App
I got a new atrix preloaded 4.5.141 from warranty, and was wondering if I would brick if I downgraded to 4.5.91 to unlock.
Thanks!
Sent from my MB860 using XDA
ritsukaakun said:
I got a new atrix preloaded 4.5.141 from warranty, and was wondering if I would brick if I downgraded to 4.5.91 to unlock.
Thanks!
Sent from my MB860 using XDA
Click to expand...
Click to collapse
There are already at least two threads on this - Search is your friend.
To unlock .141 do NOT flash the 2.3.4 full sbf - instead - flash JUST the unlockable bootloader here > http://dl.dropbox.com/u/34025287/4547-fix-try2.sbf
and unlock with fastboot. Flash that with RSD lite - it is NOT a full system or service sbf, its ONLY the unlockable bootloader....
Sorry, and thanks. :b
Sent from my MB860 using XDA
ritsukaakun said:
Sorry, and thanks. :b
Sent from my MB860 using XDA
Click to expand...
Click to collapse
I'm in the same boat as you, I had a warranty replacement and i tried that unlock sbf and i got failed to boot. Error no RSD or nothing. Sucks!
Edit: I was able to get into fastboot using: http://forum.xda-developers.com/showpost.php?p=22583493&postcount=139
same issue, but Linux user
Got a warranty replacement phone, (Linux) sudo ./moto-fastboot oem unlock doesn't work w/ 2.5.6 and 4.5.141. I think I have the sbf you recommended flashing first above, but you said to use RSD Lite, which is a windows program I think. Can I just boot the phone into RSD mode and use the sbf_flash program to flash the 4547-fix-try2.sbf or whatever it is?
FWIW, I've had MAJOR issues with the OS since I tried to go back to stock from CM7 when the wireless chip in my first phone died. Now the status bar at the top of the screen disappears and crap shifts up several pixels, you can't grab it and bring it down so it's not autohidden, the phone won't switch automatically to incoming calls, etc etc... it's essentially useless as it is (in some sort of botched up "stock" mode). Tech support turkeys say "do a factory reset" which doesn't help.
So I'm just trying to get CM7 back onto the phone so I can use it again...
Afternoon,
Well today i got a coworkers phone that he will be switching to when his new card comes in so i tried using RSDLite to flash back to .211 stock ICS (phone was on ICS but had old bootloader and such from previous owner) I had files from RSD and such from when i did this to my phone so that way i could jump to JB [had no issues] I ran RSD and said 100% complete PASS etc but it still wont leave boot loop? cant figure out why i would boot loop from rsd.
Did step by step...
reboot phone into Fast boot,
Run RSD,
Load zip file, decompress and flash
100% it auto reboots phone than wont boot past animation.
model: XT912
On RSDlite 5.7
Filename: VRZ_XT912_6.7.2-180_DHD-16_M4-31_1FF.xml <- file i use to flash
Creation Date: 06/14/2012 21:10:20
File size: 1818
Sofware Version: 6.7.2-180_DHD-16_M4-31
For Phone Model: SPYDER
I have searched numerous posts and couldn't find an answer in which relates, besides make sure for CDMA instead of GSM,
If someone could point me in the right direction i would greatly appreciate it.
TRY WIPE THE DATA AND CACHE IN RECOVERY.
Sent from my XT910 using xda app-developers app
dxl880517 said:
TRY WIPE THE DATA AND CACHE IN RECOVERY.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Dumb phone wouldnt get into recovery with the list the first time i went in there, retried and got in, working.. do greatly appreciate it! just now to get it to JB rom'd before his SIM card gets in, greatly appreciate it.
once i look into if a new JB release is out etc, got the originaly leak from just before christmas.
Blur_Version.6.16.211.XT912.Verizon.en.US <- is what file i have if its most current, got it last month sometime