Afternoon,
Well today i got a coworkers phone that he will be switching to when his new card comes in so i tried using RSDLite to flash back to .211 stock ICS (phone was on ICS but had old bootloader and such from previous owner) I had files from RSD and such from when i did this to my phone so that way i could jump to JB [had no issues] I ran RSD and said 100% complete PASS etc but it still wont leave boot loop? cant figure out why i would boot loop from rsd.
Did step by step...
reboot phone into Fast boot,
Run RSD,
Load zip file, decompress and flash
100% it auto reboots phone than wont boot past animation.
model: XT912
On RSDlite 5.7
Filename: VRZ_XT912_6.7.2-180_DHD-16_M4-31_1FF.xml <- file i use to flash
Creation Date: 06/14/2012 21:10:20
File size: 1818
Sofware Version: 6.7.2-180_DHD-16_M4-31
For Phone Model: SPYDER
I have searched numerous posts and couldn't find an answer in which relates, besides make sure for CDMA instead of GSM,
If someone could point me in the right direction i would greatly appreciate it.
TRY WIPE THE DATA AND CACHE IN RECOVERY.
Sent from my XT910 using xda app-developers app
dxl880517 said:
TRY WIPE THE DATA AND CACHE IN RECOVERY.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Dumb phone wouldnt get into recovery with the list the first time i went in there, retried and got in, working.. do greatly appreciate it! just now to get it to JB rom'd before his SIM card gets in, greatly appreciate it.
once i look into if a new JB release is out etc, got the originaly leak from just before christmas.
Blur_Version.6.16.211.XT912.Verizon.en.US <- is what file i have if its most current, got it last month sometime
Related
I tried loading ICS to my Droid Razr using Droid Razr Utility 1.7. It failed with a Status 7 error and now my phone is stuck in 3G only. It wont connect to LTE. Can someone please help me out?????
So you're still on .181?
I have written a guide (posted under development forums by user streetmedic) to manually update to the 4.0.4 ICS OTA which should help you out,
The side load 7 error is usually caused by either the need to wipe data/cache or the 1.7 utility did not successfully flash the ICS recovery.
When you boot into recovery, is it a picture of an android laying down, with a red exclamation triangle over it, or a different image? The image described indicates you are definitely using the ICS recovery which the 1.7 utility installs. If it's different, try the utility again.
If that's not the issue, while in recovery do a wipe data/factory reset AND wipe cache. After completing both of these, turn the phone off, reboot back into recovery, and install the update. Any further issues can be resolved in the development thread. This should however, fix your problem and get you on the OTA.
That was the guide I used and yes I'm still on .181 with ICS recovery. I'll give a shot again and let you know the results. Thanks
If it still gives you any issues you can use matts 1.6 utility to fastboot a fresh 181 system, then restart my guide. Best of luck
Worked like a charm!! Thanks!!!!
Sent from my DROID RAZR using xda app-developers app
Can someone help me get me out of recovery?? was running 4.04 ICS Razr Maxx.. rooted..flashed.. eclipse rom 1.3.. patched with gsm even though Im cdma.. thought i had to do it.. flashed but then text messege stopping pop ups..no 4g cant get into phone wont go through google just keeps going back to start screen english etc...tried fast boot file fails right away and my rsd lite and phone.. not connecting errors..start smartphone over or retry.. put 611.211 on flash drive put it on memory card and fails when flashing through recovery mode.. weird thing backup is there but its like empty.. thinking if i had restore i might be able to.. but i go to backup and 8152012 is there but when you press it its empty doesnt do nething..im at my wits end.. ive fixed past phones before but getting frusterated..please help
PAZZ632 said:
Can someone help me get me out of recovery?? was running 4.04 ICS Razr Maxx.. rooted..flashed.. eclipse rom 1.3.. patched with gsm even though Im cdma.. thought i had to do it.. flashed but then text messege stopping pop ups..no 4g cant get into phone wont go through google just keeps going back to start screen english etc...tried fast boot file fails right away and my rsd lite and phone.. not connecting errors..start smartphone over or retry.. put 611.211 on flash drive put it on memory card and fails when flashing through recovery mode.. weird thing backup is there but its like empty.. thinking if i had restore i might be able to.. but i go to backup and 8152012 is there but when you press it its empty doesnt do nething..im at my wits end.. ive fixed past phones before but getting frusterated..please help
Click to expand...
Click to collapse
Ate you using Safestrap? If so just bout into recovery and disable safe system yuen your stock. Or just flash eclipse again without the patch.
Sent from my DROID RAZR using xda app-developers app
PAZZ632 said:
Can someone help me get me out of recovery?? was running 4.04 ICS Razr Maxx.. rooted..flashed.. eclipse rom 1.3.. patched with gsm even though Im cdma.. thought i had to do it.. flashed but then text messege stopping pop ups..no 4g cant get into phone wont go through google just keeps going back to start screen english etc...tried fast boot file fails right away and my rsd lite and phone.. not connecting errors..start smartphone over or retry.. put 611.211 on flash drive put it on memory card and fails when flashing through recovery mode.. weird thing backup is there but its like empty.. thinking if i had restore i might be able to.. but i go to backup and 8152012 is there but when you press it its empty doesnt do nething..im at my wits end.. ive fixed past phones before but getting frusterated..please help
Click to expand...
Click to collapse
Droid RAZR utility 1.8.1 use option 1
Sent from my DROID RAZR using xda premium
My atrix 4g will only boot to motorola logo, I have an unlocked bootloader but like a fool i did a factory reset and lost root access.i have no cwm and cant find a way to get it without root access and even if I do I still have no recovery..how can I get root access without the usb debugging set and not being able to boot into phone.I have no os..i cant seem to flash anything without root so im stuck and really have no other option but to figure this out with someones help.
did you try this
sephk said:
did you try this
Click to expand...
Click to collapse
yes says cannot load..pretty much im stuck because i was on 2.3.6 and messed up something in framework and it made my phone not capable of booting pass the motorola logo. i was rooted before all this but when my phone got stuck i did a factory reset before i knew it would take my phone back to having no root and also from what i read it resets the phone so usb debugging is not checked.also ive gotten the 0x1000 error no os detected too..basicall i have no os on my phone and cant root without the usb setting and cant get to that without booting up phone..ive tried pretty much everything but without root i cant seem to flash anything at all.my bootloader is unlocked.i can get to factory ndroid and recover but have nothing to recover.i think my only option is finding a way to get cwm on phone without root or being able to boot.not sure.. sorry bout the long sob story but ive tried so many things from the forum
Boot into fastboot and flash romracer's Atrix recovery. Put a ROM on an SD card and install it through the recovery.
Sent from my MB860 using xda app-developers app
tasteslikechicken said:
Boot into fastboot and flash romracer's Atrix recovery. Put a ROM on an SD card and install it through the recovery.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
ha previously i looked everywhere for a link to that zip that worked and now i find one then download and after trying the last thing from 2nd post now when i go into recovery it says magic value mismatch and i cant even get in to try. this is a neverending circle here and im 4 days deep in looking at the computer screen trying to find a working answer. what do i do about this mismatch issue now?
you can solve this easily
go and get the 2.3.4 sbf with unlocked bootloader
rsd it
and your atrix will live again
Sent from my MB860 using xda premium
maggedo said:
you can solve this easily
go and get the 2.3.4 sbf with unlocked bootloader
rsd it
and your atrix will live again
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
i can not find a single link to that that still works.. everythings dead like my phone.. you know of one still up or any other sbf i can try?
i will try to post to you
your problem i have met before
Sent from my MB860 using xda premium
I would try the automatic bootloader unlock tool. It has a tool in the utility for "failed to boot / no os". I had the same problem as you and this worked great. It was very easy to do. http://forum.xda-developers.com/showthread.php?t=1182871&highlight=automatic
http://paulyhoffman.com/public/
OR
http://narod.ru/disk/45363482001.6e01bed58d95e4422fd2c015bebd9dca/ATT-2.3.4_Pudding_preroot.rar.html
download this file named "ATT-2.3.4_Pudding_preroot.rar"
the use RSD to flash this sbf into your Atix
After then, you can boot with stock recovery
Try to wipe factory reset and wipe cache
Then you could boot into 2.3.4 which already unlock bootloader and root.
Good luck!
download this file named "ATT-2.3.4_Pudding_preroot.rar"
the use RSD to flash this sbf into your Atix
After then, you can boot with stock recovery
Try to wipe factory reset and wipe cache
Then you could boot into 2.3.4 which already unlock bootloader and root.
Good luck![/QUOTE]
Maggedo my buddy you my sir...are a master of your craft. now that im fixed up I see that the fix was right in front of me the entire time it was just a matter of finding good links and a decompressor to extract the .sbf from the .rar..popped it in rsd ran it and bang im no longer the owner of a couple hundred dollar pocketmirror/weight..still ironing out a few details and gotta get my root access back and try to recover some of what i lost.you saved me though. i have no warranty,couldnt do insurance swap and im pretty poor haha so i had no other options.saved my life man!!! if i could hit thanks more than once id sit here and do it all day.thank you very much.
I was stuck on the Moto Dual Core Screen as well. I used the automatic unlock MAIN program to unlock, root and install custom recovery. When I tried to flash epinter's CM10 ROM I got boot hang at the Moto screen.
You can RSD back to stock (e.g. I found the AT&T .151 sbf file and restored my phone to working condition on 2.3.6 GB).
In the end I figured out that the recovery in the auto unlock tool (both the telfar and CWM options) was borking the CM10 flash. I ended up:
1. RSD lite AT&T .151 GB 2.3.6 sbf file
2. Unlock Bootloader with automatic unlock
3. Root and install custom recovery
4. Boot into android
5. download goo.manager from play store
6. Install open source recovery with goo.manager
7. reboot into recovery
8. Make backup of everything
9. Flash JB CM10 & GApps
Phone is up and running w/o issues. A bit of googling should find you the necessary sbf to get you on your feet again.
Good luck!
Rooted and unlocked moto electrify.
i have been flashing roms on several phones for many years. i always rely on the devs here at xda to help me through and you guys never fail!!!
my electrify is unlocked and rooted, been running th3bills cm10 for several weeks, also tried miui aokp and others. all great roms and great work!!
i was changing my keyboard on my phone and ran into trebuchet stopped working and couldnt get it to do anything. i tried reflashing the rom without wiping hoping it would fix it but it did. i did a reset and wipe and reload of the rom and it still stopped working. i then decided to, while in recovery, partition the sd card mount just cause i like to learn and i do that by trying thing, anyway, when i did it hung up for like 5 mins. thought it was kinda long so i pulled the battery. At this point im not sure of all the steps i took to get cm10 on my phone but it took a lot. after i put the battery back in and started the phone the screen comes on, says unlocked up in the corner but no red dual core symbol, instead it has this on the screen.......................................
unlocked
PwrReason: SW_AP_RESET
OS will boot in 5 seconds
Press a key to stop count down
Available Modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery
10 Boot Android (No BP)
11 Device UID
12 console=ttyS0,115200n8
13 Early USB Enumeration
14 BP Tools
----------------------------------------------------
Vol Up to select, Vol Down
for next choice
Current choice is mode:
Fastboot
.......................Not sure whats up and if there is any affects on the rom
If any devs or members have any info or want to try to fix this or can fix if it does cause problems please reply to the post. ill take any info available.
thanx to all the devs for all their hard work! i think i speak for everybody when i say how much your work is appreciated!!!
[email protected]
pm me on the xda app as well. rhewins2268
electrify rooted unlocked and running th3bills cm10
Its not erased. Your boot logo is erased and possibly your PDS partition is lost too. Just means you can't activate PR update your prl normally anymore.
Sent from my MB855 using xda premium
---------- Post added at 04:17 AM ---------- Previous post was at 04:15 AM ----------
To fix, restore your PDS through CWM, and also flash a boot logo through fastboot or cwm with a flashable zip.
Sent from my MB855 using xda premium
Looking into that now. In the meantime....is it going to have bad affects on my ROM. Also do you know where to get files needed to fix?
Sent from my MB855 using xda premium
No. I actually prefer it that way. Its just an issue whenever you sbf back to stock and your phone attempts to activate itself.
As far as files and such, search via Google or xda for PDS fix, it'll show either a thread for the atrix or photon.
And then search for boot logos to flash.
Sent from my MB855 using xda premium
So just to clarify.... when I sbf back to stock I will have to do what to activate?
Will I have to dial *228 or what will I run into for issues?
I have already done a lot of Google searches and found the file you spoke of last night for the atrix (does it matter?) and instruction on how to push it to my phone.
Just trying to be ahead of the game and have my info before moving forward. Phone is running great with no issues so far.
Basically picking your brain for knowledge and help before I soft brick or some sh** and have to lock my bootloader to get my phone back.
So....... thank you very much for your help and insight into this. Had never seen it before.
Sent from my MB855 using xda premium
http://forum.xda-developers.com/showthread.php?p=14888120
Follow that link and since your bootloader is unlocked, use fast boot to flash. download the PDS gingerbread zip and unzip.
Doing that will allow you to ota update in case you revert to stock.
For flashing a boot logo, follow this link and read a few posts into it to find a cwm-flashable zip to restore your boot logo: http://forum.xda-developers.com/showthread.php?t=1187337
***Don't sbf with the uscc sbf because it will lock your bootloader. ***
Sent from my MB855 using xda premium
I believe this is the question and then i'll leave you alone for a day or so lol
Do i have to be on a stock rom to do this or can i do it on th3bill's cm10 or other custom roms?
To you hoslayer13.... you have been a wealth of knowledge! I tip my hat to you sir!
To answer your question, yes you can be on a custom rom to do this but before you do check your PDS partition first. I am pretty sure there will be only a lost-found folder with nothing in it.
Sent from my MB855 using xda premium
Yes it is just an empty folder. Using file manager that comes with cm10 that comes with root access in the root directory I find a folder "PDS" and it is empty. I'm going to push the fix now and will update my results.
Sent from my MB855 using xda premium
I flashed the fix and have noticed to Ill affect on the ROM so far. Also flashed boot logo. Working great!
Thanks again hoslayer13!!
Thank you xda! Always there!
Sent from my MB855 using xda premium
Hey no problem. I'm glad I could help
Sent from my MB855 using xda premium
Needing some help again!!! Hoping you can help. dont know if you noticed but i started a new thread. reall did it this time. Fail to boot 1. only have fastboot. bootloader relocked while rsding 2.3.4 on the phone. it fail and never rebooted. hoping you can help. whem i type moto-fastboot oem unlock i get infooem not implemented or something. the bootloader has to be from 2.3.4 though cause that is what i flashed.
ANY THING AT ALL PLEASE
i can get to fastboot and flash the RDL3_unlocked.smg file and achieve temp unlock but no rsd so can go to the next step. Im trying everything i can and still nothing yet. Gonna keep trying but some help woyld really be great!! PLEASE!!
Hi i'm abit of a noob at installing custom ROMS, I used a CM10.2 nightly ROM and now my phone wont load past the first flash screen "Dual Core Technology". It loads that screen for aprox. 5 seconds then dies.
I also have the added problem of my phone not booting into recovery so I cant install a stock ROM.
Someone HELP MEEE!!
UPDATE! I can now access boot mode menu and all subsequent menus, including android system recovery. but still cant get onto CWM. and can not reboot my razr, loads motorola logo for 10 seconds then dies.
RSD lite back to stock, and use safestrap or bmm instead of cwm. Preserves your stock rom slot. Also, you are always able to flash to stock which is 4.1.2. You avoid the problem of not being able to downgrade. You'll be flashing through AP Fastboot mode.
If you absolutely have to use cwm because you need all of the internal memory available, don't use nightly releases. Use stable/milestone/release candidate versions.
The good news is you have access to your boot menu, so your phone is still in good shape. Make sure the battery is fully charged before flashing with RSD.
Sent from my XT912
LuckiestNut419 said:
RSD lite back to stock, and use safestrap or bmm instead of cwm. Preserves your stock rom slot. Also, you are always able to flash to stock which is 4.1.2. You avoid the problem of not being able to downgrade. You'll be flashing through AP Fastboot mode.
If you absolutely have to use cwm because you need all of the internal memory available, don't use nightly releases. Use stable/milestone/release candidate versions.
The good news is you have access to your boot menu, so your phone is still in good shape. Make sure the battery is fully charged before flashing with RSD.
Sent from my XT912
Click to expand...
Click to collapse
Thanks very much! ill give that a go and let you know how i get on
Ok, well Ive got RSD Lite open and my phone connected in AP Fastboot but nothing is showing on my computer, is it on my computer that it recognises the device or is it simply on my phone?
FandroidForAndriod said:
Ok, well Ive got RSD Lite open and my phone connected in AP Fastboot but nothing is showing on my computer, is it on my computer that it recognises the device or is it simply on my phone?
Click to expand...
Click to collapse
Installed moto and fastboot drivers?
The Wipe!
°It's all about the Wipe°
Ha, what I ended up doing was taking it back to the shop and played dumb...not sure if I should be insulted at the fact they thought I wasn't the type of person to rootmy phone or whether to take it as a blessing. But rocking HTC One X now, thanks for your help tho
Sent from my HTC One X using xda app-developers app