[Q]why Baseband 015 only connect on EDGE - Sony Ericsson XPERIA X10 Mini

HI
i flash it U20i_2.1.1.A.0.6_Baseband_015.tft
so now i have a baseband correct to get CM BUT i can only use edge??? why?i try *#*#4636#*#* and change to GSM AUTO and i just get EDGE someone knows why????
i used have 006 working fine , after that i DL a tft u20i UK tft and flash it i keep my 006 baseband so i flash it the 015 and install CM all was ok until i figure out i have only edge and no 3g :S any way to fix this? the apn its fine.
thanks a lot

You probably have a u20a model, remove the battery cover and look for it. When flashing a u20i baseband/firmware, you lose 3G.... I know because it happened to me!! look around for a way to revert back to stock u20a and update (I used a brazilian generic one).

Zolocofxp said:
You probably have a u20a model, remove the battery cover and look for it. When flashing a u20i baseband/firmware, you lose 3G.... I know because it happened to me!! look around for a way to revert back to stock u20a and update (I used a brazilian generic one).
Click to expand...
Click to collapse
wow indeed i got u20a so should i reverse? or there is any radio for 20a ?? thanks a lot

Zolocofxp said:
You probably have a u20a model, remove the battery cover and look for it. When flashing a u20i baseband/firmware, you lose 3G.... I know because it happened to me!! look around for a way to revert back to stock u20a and update (I used a brazilian generic one).
Click to expand...
Click to collapse
thanks a lot its fixed now
i install brazilian sin files, and the update ( i get latest radio) and then all was ok i have 3g now, and i install with success CM thanks a lot

Related

X10a With X10i 2.1 - Who's planning on flashing right away?

Hi everyone. For those of you who have an X10a, who's planning on flashing to 2.1 X10i software as soon as it's available?
Bin4ry and MarylandCookie have recommended against it, in favour of waiting for an X10a specific 2.1 here: http://forum.xda-developers.com/showthread.php?t=823115. However, I know we're all impatient and want to get new FW ASAP. We also know that in 1.6 ROMs it was not an issue to have an X10a flashed with X10i FW, and in the end, it didn't seem to affect anything, despite the different basebands.
I thought it would be a good idea to have a thread open for anyone to warn others if it brought disastrous results.
So, let's have it: anyone planning on flashing immediately with 2.1 Nordic?
Just want to add my stuff here
You MAY get Baseband issues. So the firmware and everything else should run well, but depends on the carrier you have you can get problems with 3G.
But i personally think that you will be able to flash back to 1.6 everytime using flashtool again, but that is not 100%. Maybe you have to wait for original X10A 2.1 to correct baseband.
Regards
Bin4ry
No point screwing up your phone not having SEUS support. Just debrand using the latest LAM firmware and wait till the official 2.1 is out.
SE LAM stated last week that they were still on target for a late Oct launch so it wouldn't surprise me if it gets released on Monday.
I am waiting....what is an extra day or two anyways...
Well you should be able to extract the baseband from the LAM f/w and then use the Generic Global
Or just wait for Rogers lol and have a seperate thread for the wait on that!!
No point in taking the risk, chances are that someone will try it right away and post the results within 10 minutes of the update anyways, so I'm going to just sit back and let someone elses phone be the lab rat haha.
adrianoftyriel said:
Hi everyone. For those of you who have an X10i, who's planning on flashing to 2.1 X10i software as soon as it's available?
Click to expand...
Click to collapse
Me.
adrianoftyriel said:
Bin4ry and MarylandCookie have recommended against it, in favour of waiting for an X10a specific 2.1 here: http://forum.xda-developers.com/showthread.php?t=823115.
Click to expand...
Click to collapse
Why would X10i users wait for the X10a. Can you quote exactly what it is they "warn against"?
adrianoftyriel said:
We also know that in 1.6 ROMs it was not an issue to have an X10a flashed with X10i FW, and in the end, it didn't seem to affect anything, despite the different basebands.
Click to expand...
Click to collapse
And not being able to update with SEUS.
adrianoftyriel said:
So, let's have it: anyone planning on flashing immediately with 2.1 Nordic?
Click to expand...
Click to collapse
I'm just going to wait for the UK Generic.
adrianoftyriel said:
Hi everyone. For those of you who have an X10i, who's planning on flashing to 2.1 X10i software as soon as it's available?
Click to expand...
Click to collapse
What you mean to ask is
For those of you who have an X10a, who's planning on flashing to 2.1 X10i software as soon as it's available?
Click to expand...
Click to collapse
The potential problems are with X10a phones running an X10i rom but you already know that since the title of the thread is phrased correctly. Just want to avoid further confusion there...
XperiaX10iUser said:
Me.
Why would X10i users wait for the X10a. Can you quote exactly what it is they "warn against"?
Click to expand...
Click to collapse
He meant x10a users waiting for x10a firmware. Seems to have been a misunderstanding here. This point was referring to x10a users flashing their handsets with the Nordic x10i release of 2.1 but were advised to wait for the LAM release or their Rogers.
Hi guys can please someone let me know whats going on? My question is why u dont advise flashing an x10a with x10i? My phone was originaly the stock rogers one and was x10a but to debrand it i used 026 x10i rom a few months ago and now its 026 x10i global generic. So can i flash this 2.1 rom?
Sent from my X10i using XDA App
In a nutshell we had x10a baseband for 1.6 but for 2.1 we dont.
You could try flashing it without the x10i 2.1 baseband but we dont know how that will go down and how that will affect functionality of 3g, radios, mediascape etc so we advised against it. At your own peril .... lol
Nankov said:
My question is why u dont advise flashing an x10a with x10i? My phone was originaly the stock rogers one and was x10a but to debrand it i used 026 x10i rom a few months ago and now its 026 x10i global generic. So can i flash this 2.1 rom?
Click to expand...
Click to collapse
There are files on those guides to change back to X10a, and it's my understanding that if you've flashed a to i or vice versa you can't use SEUS to update.
MarylandCookie said:
In a nutshell we had x10a baseband for 1.6 but for 2.1 we dont.
You could try flashing it without the x10i 2.1 baseband but we dont know how that will go down and how that will affect functionality of 3g, radios, mediascape etc so we advised against it. At your own peril .... lol
Click to expand...
Click to collapse
And is there a big possibility to brick the phone completely without a chance to go back?
Sent from my X10i using XDA App
XperiaX10iUser said:
Why would X10i users wait for the X10a. Can you quote exactly what it is they "warn against"?
Click to expand...
Click to collapse
My bad. The first X10i should be an X10a. Edited.
As for assurances that it can be reversed... I'm confident that even if it doesn't work, someone here with figure out a way to reflash X10a firmware... but the bottom line is that it is unlikely that it will be irreversible, but we cannot know until someone tries.
delete pls
man ive been reading this for days on end, and im confused as hell.
i have a X10a, i flashed generic global, now it shows up as X10i, does that mean its stuffed?
i run SEUS and it still says "your phone has the latest software" ect ect.
can someone PLEASE tell me if my phones bummed or not? do i flash back to X10a now or something?
aussiesausage said:
man ive been reading this for days on end, and im confused as hell.
i have a X10a, i flashed generic global, now it shows up as X10i, does that mean its stuffed?
i run SEUS and it still says "your phone has the latest software" ect ect.
can someone PLEASE tell me if my phones bummed or not? do i flash back to X10a now or something?
Click to expand...
Click to collapse
if you dont know what your doing, maybe you should do your research first?
I'm glad noobs are here for hardware testing
robbyf66 said:
if you dont know what your doing, maybe you should do your research first?
I'm glad noobs are here for hardware testing
Click to expand...
Click to collapse
i know what im doing in regards to flashing it, but i didnt know flashing X10i **** on X10a would **** the phone, i took that section in the stickie that i can flash back to X10a
...........
robbyf66 said:
if you dont know what your doing, maybe you should do your research first?
I'm glad noobs are here for hardware testing
Click to expand...
Click to collapse
Robby don't be mean
(ofcourse they are for that but they aren't supposed to know)
Anyway, I think you're fine mate, as long as you flash back an X10a firmware. People say that SEUS doesn't work if you 'cross-flash' but maybe you can just wait till Sunday evening and see if u don't get any update, and then flash back
pngface said:
Robby don't be mean
(ofcourse they are for that but they aren't supposed to know)
Anyway, I think you're fine mate, as long as you flash back an X10a firmware. People say that SEUS doesn't work if you 'cross-flash' but maybe you can just wait till Sunday evening and see if u don't get any update, and then flash back
Click to expand...
Click to collapse
theres no 026 in X10a in the stickie either.
any idea when sunday evening over there is here in australia? im guessing monday morning or something?
i will have to flash to nordic ROM
aussiesausage said:
theres no 026 in X10a in the stickie either.
any idea when sunday evening over there is here in australia? im guessing monday morning or something?
i will have to flash to nordic ROM
Click to expand...
Click to collapse
IMO, I think we are perfectly fine with the x10i 2.1 version coming out (if we can flash it)
There is a possibility for it to go screwy but I think we proved it won't by using previous x10i roms on x10a. I honestly doubt that they would have changed this, if they were this concerned about it then 2.2 would be out.
I hope my intuitions are correct I'll probably try it first day (just not the first person )

Why change region?

Hi everyone,
I'm in canada and own an x10 with rogers.
Last week, I loaded the global fw on it and rooted it. So far everything works great.
Reading up on other posts, it seems like some ppl who updated prematurely regardless of their regions are planning and coming up with ways to update according to their regions once the official updates roll out.
The question I have is, why? My x10 works fine although it's not x10a anymore. So is it necessary to switch?
Hi man, I just finished to re-flash my X10a with the new Brazilian FW (X10a 2.1) i choose to match Phone Version(X10a) with FW Version(X10a)....reflash is so easy why not?
Btw with GlobalFW my bluetooth dosent work with the laptop (1.6 do) but now with the correct FW works great again (placebo effect? idont kown)
maybe beacuse people want to keep their warranty...
Skrba said:
maybe beacuse people want to keep their warranty...
Click to expand...
Click to collapse
yeah is morelike a just in case
XlipZ said:
Hi man, I just finished to re-flash my X10a with the new Brazilian FW (X10a 2.1) i choose to match Phone Version(X10a) with FW Version(X10a)....reflash is so easy why not?
Btw with GlobalFW my bluetooth dosent work with the laptop (1.6 do) but now with the correct FW works great again (placebo effect? idont kown)
Click to expand...
Click to collapse
Hi can you post your build.prop? I'm trying to put my 2.1 back to Brazil but I must have missed something, cos PC Companion can't download the file. I might have made a mistake with the version numbers...
Rogers will release 2.1 tomorrow.
Or at least this is the rumor.
Sent from my X10i
dpk0875 said:
Hi everyone,
I'm in canada and own an x10 with rogers.
Last week, I loaded the global fw on it and rooted it. So far everything works great.
Reading up on other posts, it seems like some ppl who updated prematurely regardless of their regions are planning and coming up with ways to update according to their regions once the official updates roll out.
The question I have is, why? My x10 works fine although it's not x10a anymore. So is it necessary to switch?
Click to expand...
Click to collapse
It's very unlikely, but, some users also like/want their carrier/region specific bundled applications.
And, like, yeah, warranty.

Can't call/text

Hi all,
I am in need of help in order to get my phones main function back up and running. I've tried a 2.1 rom and just installed 2.3.2, both have lost me the function of Texting/Calling which is really frustrating as the city my family is in has just had a 6.3 earthquake in Christchurch NZ..
PLEASE HELP ;(
quake.crowe.co.nz/
nzherald.co.nz/nz/news/article.cfm?c_id=1&objectid=10708086
U probably used the wrong baseband.... if u check it will probably say baseball unknown.... but to be sure we need. More info on what u did and how u tried to do it.
In any case u should just flash a 2. 1 firmware with flashtool and if that doesn't fix ur problem then repair with sues.
Sent from my X10i using XDA App
Thanks man, I used the baseband that came with the 015 of 2.3.2 gingerbread. My phone says X10A, but the drivers X10I.
If I cant get it going soon I will try 2.1
Could the baseband that came the rom be the wrong one? Ive also updated to 016.
thx
To ensure it works first flash your phone to either the 54 or 55 baseband, then flash the Rom.
I am quite sure that flashing a Rom will not change your baseband, so check the start of the Rom thread for which baseband is required to run the Rom.
Dc
Sent from my X10i using XDA App
The phone has .54 baseband. I've tried 2.1_2_1_A_0_435_GLOBAL and that doesn't work either...
What do I need to do exactly to get any rom to work with my network? If someone could take a few minutes to help, It would be greatly appreciated.
well as you need the phone urgently, id connect it to SEUS and repair back to the original SE firmware, that way you should be able to make your calls to NZ, you can then fiddle around with Roms once youve covered your emergency.
DC
Droidcarp said:
well as you need the phone urgently, id connect it to SEUS and repair back to the original SE firmware, that way you should be able to make your calls to NZ, you can then fiddle around with Roms once youve covered your emergency.
DC
Click to expand...
Click to collapse
I just tried SEUS twice, but it just keeps coming up with the last installed rom I tried.. This is all very confusing..
If my phone is x10a does that mean I can only rom a x10a and get service in my country?

[Request] ST18a build.prop to change regions

Hi,
I'm trying to change my ST18i to an ST18a to use the other 3G frequencies, could someone please post the build.prop from a ST18a.
ST18i currently has this in build.prop I'm looking for the number for the ST18a:
ro.product.name=ST18i_1251-8357
Thanks for any help, or let me know if this can't be done?
And after this number changing your able use other frequencies???
Hardware supports this?
Sent from my MT15i using Tapatalk
So the plan is to alter the build.prop file, this is then used by SEUS to determine which firmware needs to be installed on the device.
Once SEUS reflashes the modem with the ST18a Baseband I believe the hardware is then capable of using the other frequencies... if I'm wrong I'm hoping someone will let me know?
dbarrade said:
So the plan is to alter the build.prop file, this is then used by SEUS to determine which firmware needs to be installed on the device.
Once SEUS reflashes the modem with the ST18a Baseband I believe the hardware is then capable of using the other frequencies... if I'm wrong I'm hoping someone will let me know?
Click to expand...
Click to collapse
Sorry but that's not possible... the use off frecuencies is a hardware thing. Sorry
I wouldn't even get a try. If you do, you'll probably get you radio off, and that's having not fix.
It's like the Cliq/Dext issue. It's the same phone, but different baseband.
Are you guys sure about this, a lot of people seem to have done it with the X10i to X10a baseband or X10a to X10i baseband no problems...
dbarrade said:
Are you guys sure about this, a lot of people seem to have done it with the X10i to X10a baseband or X10a to X10i baseband no problems...
Click to expand...
Click to collapse
I'm sure i tested my smartphone whith a Sin card from a provider whose 3g signal goes through the 900 baseband (my phone is unlocked). Using MiniCM 7 from nAa, my phone's model is an e10a, however, as you can see in the signature, my build.prop says i've got an e10i... no 3g detected. Only edge o 2g or gsm, no Hdspa when i test the mentioned Sim. Sorry as i said before, is a hardware thing, if what you say, where true, by using this ROM i wouldn't be able to use the hdspa networks from my carrier, that goes trough the 850... the e10i can't use that baseband. So i'm completely sure. Sorry
Enviado desde mi E10i usando Tapatalk

[FIRMWARE] 2.1.1.A.0.6 for U20a

Hi everybody. I want to share with all of you the firmware for South America (at least Argentina) X10 mini pro U20a, created by myself using pc-companion and flashtool, and of course, tested by me.
Base Band: M76XX-TSNCJOLYM-53404015
Compilation number: 2.1.1.A.0.6
I share it because I searched a lot in the web, with no luck. Furthermore, pc-companion or SEUS seems not to repair eclair anymore, unless you downgrade to baseband XXX006. Fortunately I found this post by shivenjuneja that helped me to restore my U20a eclair.
Why do you need this? Because if your phone is U20a and if you put some U20i ftf on it, you will lose 3g (edge will work). And of course, this is the fastest way to get a fresh stock eclair, in case you need.
Flash it with flashtool
DISCLAIMER: I AM NOT RESPONSIBLE IF YOU BRICK YOUR DEVICE OR GET DAMAGED IN ANY WAY. ONLY TESTED ON UNLOCKED BOOTLOADER. TRY AT YOUR OWN RISK
Download
makin 100
is very cool idea, you are the best.....makin 100%
mortadelax said:
Hi everybody. I want to share with all of you the firmware for South America (at least Argentina) X10 mini pro U20a, created by myself using pc-companion and flashtool, and of course, tested by me.
Base Band: M76XX-TSNCJOLYM-53404015
Compilation number: 2.1.1.A.0.6
I share it because I searched a lot in the web, with no luck. Furthermore, pc-companion or SEUS seems not to repair eclair anymore, unless you downgrade to baseband XXX006. Fortunately I found this post by shivenjuneja that helped me to restore my U20a eclair.
Why do you need this? Because if your phone is U20a and if you put some U20i ftf on it, you will lose 3g (edge will work). And of course, this is the fastest way to get a fresh stock eclair, in case you need.
Flash it with flashtool
DISCLAIMER: I AM NOT RESPONSIBLE IF YOU BRICK YOUR DEVICE OR GET DAMAGED IN ANY WAY. ONLY TESTED ON UNLOCKED BOOTLOADER. TRY AT YOUR OWN RISK
Download
Click to expand...
Click to collapse
Thanks man! I flashed it on my 1.6 froyo, it was months ago, so i came back now, to push thanks button. (i forgot this, lol.) :fingers-crossed:
Sirius_Balzier said:
Thanks man! I flashed it on my 1.6 froyo, it was months ago, so i came back now, to push thanks button. (i forgot this, lol.) :fingers-crossed:
Click to expand...
Click to collapse
Good to know! My mini pro doesn't work any more. i have it dissasembled. Maybe will try to fix some day. Regards.
mortadelax said:
Good to know! My mini pro doesn't work any more. i have it dissasembled. Maybe will try to fix some day. Regards.
Click to expand...
Click to collapse
Thanks
Sorry to hear it
It's a good phone, hope you can fix it. :fingers-crossed:

Categories

Resources