[Request] ST18a build.prop to change regions - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

Hi,
I'm trying to change my ST18i to an ST18a to use the other 3G frequencies, could someone please post the build.prop from a ST18a.
ST18i currently has this in build.prop I'm looking for the number for the ST18a:
ro.product.name=ST18i_1251-8357
Thanks for any help, or let me know if this can't be done?

And after this number changing your able use other frequencies???
Hardware supports this?
Sent from my MT15i using Tapatalk

So the plan is to alter the build.prop file, this is then used by SEUS to determine which firmware needs to be installed on the device.
Once SEUS reflashes the modem with the ST18a Baseband I believe the hardware is then capable of using the other frequencies... if I'm wrong I'm hoping someone will let me know?

dbarrade said:
So the plan is to alter the build.prop file, this is then used by SEUS to determine which firmware needs to be installed on the device.
Once SEUS reflashes the modem with the ST18a Baseband I believe the hardware is then capable of using the other frequencies... if I'm wrong I'm hoping someone will let me know?
Click to expand...
Click to collapse
Sorry but that's not possible... the use off frecuencies is a hardware thing. Sorry

I wouldn't even get a try. If you do, you'll probably get you radio off, and that's having not fix.
It's like the Cliq/Dext issue. It's the same phone, but different baseband.

Are you guys sure about this, a lot of people seem to have done it with the X10i to X10a baseband or X10a to X10i baseband no problems...

dbarrade said:
Are you guys sure about this, a lot of people seem to have done it with the X10i to X10a baseband or X10a to X10i baseband no problems...
Click to expand...
Click to collapse
I'm sure i tested my smartphone whith a Sin card from a provider whose 3g signal goes through the 900 baseband (my phone is unlocked). Using MiniCM 7 from nAa, my phone's model is an e10a, however, as you can see in the signature, my build.prop says i've got an e10i... no 3g detected. Only edge o 2g or gsm, no Hdspa when i test the mentioned Sim. Sorry as i said before, is a hardware thing, if what you say, where true, by using this ROM i wouldn't be able to use the hdspa networks from my carrier, that goes trough the 850... the e10i can't use that baseband. So i'm completely sure. Sorry
Enviado desde mi E10i usando Tapatalk

Related

[Q] x10a? or x10i? which is it meant to be ??

Right, I'm really confused?
Not with all the flashing, branding, debranding and all that jazz, That's easy. I got my x10 in the UK, On the Orange network.
I've had it ages and didn't really look at the box or under thebattery whether it was an x10a or x10i until recently. On the phone it said the firmware was x10a but when I checked the box etc I noticed it says x10i. It's flashed to x10i firmware now and global generic blah blah blah.
When I first tried SUES I got the not being able to update deal but now I can, I've used it a few times. Anyone any ideas on it and what it's meant to be lol?
The difference between the two are the 3g bands they support. X10a supports att's 3g. X10i supports t-mobile. In the USA at least.
gavriel18 said:
The difference between the two are the 3g bands they support. X10a supports att's 3g. X10i supports t-mobile. In the USA at least.
Click to expand...
Click to collapse
Thanks dude, but I did know this.
I was more confused as to why the firmware was x10a while meant to be x10i
Did you flash the X10a rom to it? All UK phones should be X10i.
XperiaX10iUser said:
Did you flash the X10a rom to it? All UK phones should be X10i.
Click to expand...
Click to collapse
I used Bin4ry's root method and and flashed it to the x10i firmware, I couldn't get SUES to work with it at first and was going to try and flash it back to x10a but then it started working and is fine now.
TheBionicChef said:
I used Bin4ry's root method and and flashed it to the x10i firmware
Click to expand...
Click to collapse
If you followed every step then that's why it ended up as an X10a, and as far as I know SEUS won't run if you've flashed a to i or vice versa.
XperiaX10iUser said:
If you followed every step then that's why it ended up as an X10a, and as far as I know SEUS won't run if you've flashed a to i or vice versa.
Click to expand...
Click to collapse
No it was x10a to start with and i've flashed it to x10i now

[Q]why Baseband 015 only connect on EDGE

HI
i flash it U20i_2.1.1.A.0.6_Baseband_015.tft
so now i have a baseband correct to get CM BUT i can only use edge??? why?i try *#*#4636#*#* and change to GSM AUTO and i just get EDGE someone knows why????
i used have 006 working fine , after that i DL a tft u20i UK tft and flash it i keep my 006 baseband so i flash it the 015 and install CM all was ok until i figure out i have only edge and no 3g :S any way to fix this? the apn its fine.
thanks a lot
You probably have a u20a model, remove the battery cover and look for it. When flashing a u20i baseband/firmware, you lose 3G.... I know because it happened to me!! look around for a way to revert back to stock u20a and update (I used a brazilian generic one).
Zolocofxp said:
You probably have a u20a model, remove the battery cover and look for it. When flashing a u20i baseband/firmware, you lose 3G.... I know because it happened to me!! look around for a way to revert back to stock u20a and update (I used a brazilian generic one).
Click to expand...
Click to collapse
wow indeed i got u20a so should i reverse? or there is any radio for 20a ?? thanks a lot
Zolocofxp said:
You probably have a u20a model, remove the battery cover and look for it. When flashing a u20i baseband/firmware, you lose 3G.... I know because it happened to me!! look around for a way to revert back to stock u20a and update (I used a brazilian generic one).
Click to expand...
Click to collapse
thanks a lot its fixed now
i install brazilian sin files, and the update ( i get latest radio) and then all was ok i have 3g now, and i install with success CM thanks a lot

[Q] e10a software firmware ftf

i have been using the e10i software on my phone for a little bit of time but i need 3g again. does anyone know where i can get e10a ftf files for flashtool or something, rogers firmware would be best. I appreciate any help thank you.
man I'm in the same situation I need that e10a files (possibly for the mexican company telcel, but any at this point will work), right now my mini says e10i but wifi doesn't work and SEUE says that there are no available update files for my device
ill make a guide for you guys in a sec
hope it works for u guys
http://forum.xda-developers.com/showthread.php?p=15902809#post15902809
DBBGBA said:
man I'm in the same situation I need that e10a files (possibly for the mexican company telcel, but any at this point will work), right now my mini says e10i but wifi doesn't work and SEUE says that there are no available update files for my device
Click to expand...
Click to collapse
i got the ones for telcel .. well if i thing youre saying mp tomorrow abd i would send it if im not wrong
Sent from my X10mini using XDA App

Official gingerbread for x10a

Hi guys
Just wondering would there be a gb update for the x10a?
Also the official GB roms wont work with bb65 would it?
Thanks
Sent from my Nexus S using XDA App
There will be a GB update for all variations of X10 (eventually) apart from maybe carrier locked devices.
hve u tried flashing pre-rooted version...??
currently on cobrato's miui, really don't see a need to move to official GB until the camera's ported. just wondering if anyone else tried it that's all
i guess i just have to wait a fair long time for the x10a version...
Z3US911 said:
hve u tried flashing pre-rooted version...??
Click to expand...
Click to collapse
it says for x10i , will it work for x10a? since different 900/1800 stuff?
marksee said:
it says for x10i , will it work for x10a? since different 900/1800 stuff?
Click to expand...
Click to collapse
Yes.
It doesn't matter because all firmwares after v2.1 include both (software) radios for "a" and "i".
NOTE: Flashing an "i" firmware onto your "a" phone does NOT give you "i"-frequency 3G support (and vice versa). (Hardware) radios are FIXED and cannot be changed by firmware flashing.
v2.3 Update on my Canadian Rogers X10a:
I understand that it will work. I was using. 67 baseband for a while. But I find baseband such as. 65 is more optimised. I'll are how patient I am....
Sent from my X10i using XDA App

difference between x 10i and x10

what is the difference of x10 and x10i?
can i use the tutorials and roms for x10 on x10i?
sorry for the noob question
iel0000 said:
what is the difference of x10 and x10i?
can i use the tutorials and roms for x10 on x10i?
sorry for the noob question
Click to expand...
Click to collapse
Hi there, I believe it has something to do with the area / country in which it was sold, and also the frequency bands for 3G (so in short different areas have different frequency's for phones) .
(I use a X10I rom on my X10A and there seems to be no difference for me .)
_Denham_ said:
Hi there, I believe it has something to do with the area / country in which it was sold, and also the frequency bands for 3G (so in short different areas have different frequency's for phones) .
(I use a X10I rom on my X10A and there seems to be no difference for me .)
Click to expand...
Click to collapse
so can i flash x10 roms to x10i?
iel0000 said:
so can i flash x10 roms to x10i?
Click to expand...
Click to collapse
I would not recommend doing that if your phone seems to work fine, and if you are having problems with your phone you normally can use Sony pc companion to reinstall the firmware.
The only reason mine runs an X10I firmware is because my phone got bricked and the X10A firmware would not work.
_Denham_ said:
I would not recommend doing that if your phone seems to work fine, and if you are having problems with your phone you normally can use Sony pc companion to reinstall the firmware.
The only reason mine runs an X10I firmware is because my phone got bricked and the X10A firmware would not work.
Click to expand...
Click to collapse
thanks for the reply..but i already tried flashing x10 roms to my friends x10i and it works like a charm
Sent from my GT-I8552 using XDA mobile
iel0000 said:
thanks for the reply..but i already tried flashing x10 roms to my friends x10i and it works like a charm
Sent from my GT-I8552 using XDA mobile
Click to expand...
Click to collapse
Hi... i have a x10i and i am looking for a rom to flash into it, but i don´t know how to do it...
i´m searching forum´s to learn...
can you tell me what rom did you install and the steps?
i´m looking for a rom that transform my 2.3.3 android into a 4, or something like that...
Thanks!
Flashing a x10i rom to my x10a phone switched the working bands from:
umts_bc1, umts_bc2, umts_bc5, umts_bc6
to
umts_bc1, umts_bc4, umts_bc8
Then in order to reconfigure the bands I flashed x10a rom, but It don't worked ¿what's wrong with my phone?

Categories

Resources