My SD card won't mount. The phone says it is mounted, but PC shows nothing. This is the first time this has ever happened.
EDIT: Nevermind booted into recovery and it mounted fine.
Of you're talking about mounting it to the computer when the phone is on, its a bug I believe and as a temporary fix, just go to internet pass through, then turn disk drive back on and it should pop up
Sent from my ADR6400L using XDA App
I read in his forum that it will be fixed in his next up date. But as akstyle450 said, that work around works great.
I read in his forum that it will be fixed in his next up date. But as akstyle450 said, that work around works great.
Related
Its been some time now that i can no loner access my external 2GB card (where avatar is stored). I am using the right drivers from this thread http://forum.xda-developers.com/showthread.php?t=728929... Not sure why all of the sudden i can't access it from my PC. Any clues?
So I assume you can still access your internal sd? I'll just start with that question.....
Sent from my pocket rocket!
OK, i opened up the phone, took out batter, ejected and re-inserted the sdcard. Reboot, now everything works fine. Weird...
azsamsancho said:
OK, i opened up the phone, took out batter, ejected and re-inserted the sdcard. Reboot, now everything works fine. Weird...
Click to expand...
Click to collapse
I have the same problem and trying this ^ trick didnt work.
Any solutions???
sLiKK said:
I have the same problem and trying this ^ trick didnt work.
Any solutions???
Click to expand...
Click to collapse
i guess try it again, leave out the battery for a minute
Is there a way I can get my SD card mounted or read when conected to usb? it doesnt work on the Gingeritis Rom. No complaints to the Rom because I love it but just needed suggestions.
Change your charge mode to charge only? And if it is on that, change to pass through, give it a couple minutes and then change back. It sometimes seems to get stuck in the wrong mode.
Sent from my ADR6400L using XDA App
I feel like a total noob, so please be kind.
I connected my TB to the home PC today (windows XP), but I cannot access the SD card.
When connected to PC, SD Phone & Storage/Unmount SD card is grey'd out.
When disconnected from PC, SD PHone & Store/Unmount SD card is white (available).
My settings:
USB Connection type: Disk drive
Applications/Development: USB debugging is checked
I know for sure that I've been able to access the SD card when connected before. What in the heck am I doing wrong??
What's you're ROM?
Stock ROM. I'm trying to get rooted and need to transfer files to SD card.
Sent from my ADR6400L using XDA App
I should also note...when connected to PC I can see the phone via Windows explorer. Just not the SD card. Weird.
Sent from my ADR6400L using XDA App
You might try reseating the card?
I can read and write to the card no problem on the phone. It's the PC that can't see it. I have some pics and video of my kids on there right now so I want to avoid formatting unless absolutely necessary. I'll try reseating, rebooting phone and pc, and see if that kicks anything loose.
Sent from my ADR6400L using XDA App
Guessing here, but if you are running a GB Rom with an older kernel, you might need to put the phone into internet passthrough mode, wait about 5 secs, then change it to disk drive. That problem was fixed in later kernels.
Sent from my ADR6400L using XDA Premium App
Make sure you pick disk drive mode and then wait. It takes sometimes a minute plus for my pc to see the second drive (sd card), first one (verizon) comes up quick.
After much tinkering in the past 12 hours I'm convinced the issue is on the Windows XP side and not my phone. I cannot access my wife's SD card either (she also has a thunderbolt). But I CAN access the SD cards in both phones via Ubuntu. So although I've got it narrowed down to XP, I still haven't figured out how to get XP to see it.
Sent from my ADR6400L using XDA App
idahonld said:
After much tinkering in the past 12 hours I'm convinced the issue is on the Windows XP side and not my phone. I cannot access my wife's SD card either (she also has a thunderbolt). But I CAN access the SD cards in both phones via Ubuntu. So although I've got it narrowed down to XP, I still haven't figured out how to get XP to see it.
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
did you just connect and wait for a couple of minutes?
you might also want to check device manager make sure windows didn't have in issue loading. I've seen that happen, second the thoughts on waiting a few minutes to see if it shows. Had that happen a few times on windows machines.
Yeah, I waited about 20 minutes hoping something positive would happen. Nothing. I uninstalled the phones driver from 'My Computer/Manage'. Then rebooted the PC. Then plugged the phone back in. It downloaded a fresh driver. Still no SD card tho. Maybe its tome to reinstall XP and see if that fixes the problem.
Sent from my Thunderbolt via XDA App
Have you updated your drivers on your PC?
I have a computer running XP and I can see my sd card just fine on my TB.
I did have an older drivers and needed to load an newer one for it to work when I getting ready to first root my phone as well.
Try running this tool:
http://www.nirsoft.net/utils/usb_devices_view.html
I'm running x64 Windows 7, so I doubt the verison I have will help you. You can get a 32bit version from the link.
It's USBDeview and allows you to see all current connected USB devices as well as all previously used devices. Found it here on another thread, and it was fixing a number of user's issues.
Got my sgs2 yesterday, had the Sim put in, data worked fine. Took it out and put it in my captivate so I could charge my new phone, and data worked fine there too. But now putting it back in my new phone it gets signal but no data.d. I've checked all the settings, I have packet data enabled, even tried roaming. Also rebooted several times. Any ideas or suggestions?
Sent from my SAMSUNG-SGH-I777 using XDA App
In the status bar at the to what do you see, is there an H+ with two arrows below it?
Sent from my SAMSUNG-SGH-I777 using XDA App
re: no data
crag11 said:
Got my sgs2 yesterday, had the Sim put in, data worked fine. Took it out and put it in my captivate so I could charge my new phone, and data worked fine there too. But now putting it back in my new phone it gets signal but no data.d. I've checked all the settings, I have packet data enabled, even tried roaming. Also rebooted several times. Any ideas or suggestions?
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
Try this, go into settings>privacy>factory data reset> select that and it
will delete any apps you have downloaded/installed and it will format and
use all the default settings the phone had when you first purchased the phone.
It will format your internal sdcard and reset the phone.
If you have any mp3's, pictures or videos on the phone
right now you may want to copy all of that stuff to your
computer first.
Misterjunky said:
Try this, go into settings>privacy>factory data reset> select that and it
will delete any apps you have downloaded/installed and it will format and
use all the default settings the phone had when you first purchased the phone.
It will format your internal sdcard and reset the phone.
If you have any mp3's, pictures or videos on the phone
right now you may want to copy all of that stuff to your
computer first.
Click to expand...
Click to collapse
That only wipes and resets the system and data partitions, it won't touch the sdcard, but you should have all of everything important to you backed up before you try anything encase something gets corrupted.
That said I would do some more trouble shooting on your signal and connection before you start doing things like this.
Sent from my SAMSUNG-SGH-I777 using XDA App
crag11 said:
Got my sgs2 yesterday, had the Sim put in, data worked fine. Took it out and put it in my captivate so I could charge my new phone, and data worked fine there too. But now putting it back in my new phone it gets signal but no data.d. I've checked all the settings, I have packet data enabled, even tried roaming. Also rebooted several times. Any ideas or suggestions?
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
You may actually want to call AT&T and tell them you're not getting any data connection. I had that happen to me when I got my previous phone before my gs2 and again when I got my gs2. It probably still shows the captivate provisioned to the network for your data side of the line.
They will tell you to turn off the phone then remove the battery and sim card. Then they will do their thing and tell you to put back in the sim card and battery and turn the phone back on. It should work after that.
HI Everybody,
I installed the AOKP CM10 ROM from this forum and the install went great. Thanks for that. Things were going along well but then it seems to have unmount the SD card. The card is mounted after a fresh reboot but then it is unmounted (and can't be remounted as far as I can tell) when the tablet goes to sleep (screen blank). The odd thing is that Root Explorer won't show the files but it has the correct usage of the card listed. It says the card is empty. If I reboot again, it's there and can be used. If it goes to sleep again the card is unmounted or put into the funky state. It's very odd.
I had CM7 (also from this forum) running on it previously and it did not have this issue. It had the WIFI problem when it when to sleep but the SD card was rock solid.
Any ideas about what I can do? The version of the ROM is cm10-jb-aokp acclaim unofficial 0.01 and I did upgrade CWM to the 6.0.1.5 version before starting the install.
Thanks in advance for the help.
ronch808 said:
HI Everybody,
I installed the AOKP CM10 ROM from this forum and the install went great. Thanks for that. Things were going along well but then it seems to have unmount the SD card. The card is mounted after a fresh reboot but then it is unmounted (and can't be remounted as far as I can tell) when the tablet goes to sleep (screen blank). The odd thing is that Root Explorer won't show the files but it has the correct usage of the card listed. It says the card is empty. If I reboot again, it's there and can be used. If it goes to sleep again the card is unmounted or put into the funky state. It's very odd.
I had CM7 (also from this forum) running on it previously and it did not have this issue. It had the WIFI problem when it when to sleep but the SD card was rock solid.
Any ideas about what I can do? The version of the ROM is cm10-jb-aokp acclaim unofficial 0.01 and I did upgrade CWM to the 6.0.1.5 version before starting the install.
Thanks in advance for the help.
Click to expand...
Click to collapse
try moving all ur apps that depend on the sd card to the tablet itself and that should solve your problems...
Thanks, I thought about that. I'm just wondering if it's a problem with CM10 or something else. I think I only have one app that is currently using the SD card. I'll move it and I'm pretty sure my issue will be worked around. Would be nice to have this fixed though. I put movies on the SD card to watch them on plane flights. If it's not really working it makes it hard to do that.
Thanks again.
ronch808 said:
Thanks, I thought about that. I'm just wondering if it's a problem with CM10 or something else. I think I only have one app that is currently using the SD card. I'll move it and I'm pretty sure my issue will be worked around. Would be nice to have this fixed though. I put movies on the SD card to watch them on plane flights. If it's not really working it makes it hard to do that.
Thanks again.
Click to expand...
Click to collapse
The SD card unmounting is a known bug in all the CM10 ROMs, and seems to be linked to WiFi waking and sleeping. The most common work-around is to manually turn off WiFi before your tablet goes to sleep. Alternatively, you can use an app like AutomateIt or Tasker to have WiFi turn off when the screen turns off. Since installing AutomateIt and configuring it to turn off WiFi when the screen turns off, I haven't had a problem with the SD card unmounting (on either the AOKP ROM or Demetris' CherryPick ROM).
spcagigas said:
The SD card unmounting is a known bug in all the CM10 ROMs, and seems to be linked to WiFi waking and sleeping. The most common work-around is to manually turn off WiFi before your tablet goes to sleep. Alternatively, you can use an app like AutomateIt or Tasker to have WiFi turn off when the screen turns off. Since installing AutomateIt and configuring it to turn off WiFi when the screen turns off, I haven't had a problem with the SD card unmounting (on either the AOKP ROM or Demetris' CherryPick ROM).
Click to expand...
Click to collapse
Thanks for that. However I have some new information. I was waiting to see if this turned out to be stable and it does seem to be working. So on the original work-around to move any apps from the SD card to the internal memory I had only one app, Aldiko reader. The odd thing was that even installing it the first time it wanted to install onto the SD card. There was no way to force the install to the internal storage. Anyway, once I moved the app everything started working. It's been 2 days now that the SD card has stayed mounted. Also, the WIFI has been working great moving between my home network and the work network. So I'm not sure what is going on with the Aldiko reader but it somehow was causing the SD card to unmount when the tablet went to sleep. Very odd.
Thanks for all the help. Everything is working and it's work great! I moved the launcher over to the Nova launcher today as I wanted more home sceens (not that I really needed them just to see if that would work and it does). I couldn't get the default CM10 launcher to do that, at least I couldn't find a configuration option to allow that.
ronch808 said:
Thanks for that. However I have some new information. I was waiting to see if this turned out to be stable and it does seem to be working. So on the original work-around to move any apps from the SD card to the internal memory I had only one app, Aldiko reader. The odd thing was that even installing it the first time it wanted to install onto the SD card. There was no way to force the install to the internal storage. Anyway, once I moved the app everything started working. It's been 2 days now that the SD card has stayed mounted. Also, the WIFI has been working great moving between my home network and the work network. So I'm not sure what is going on with the Aldiko reader but it somehow was causing the SD card to unmount when the tablet went to sleep. Very odd.
Thanks for all the help. Everything is working and it's work great! I moved the launcher over to the Nova launcher today as I wanted more home sceens (not that I really needed them just to see if that would work and it does). I couldn't get the default CM10 launcher to do that, at least I couldn't find a configuration option to allow that.
Click to expand...
Click to collapse
What you saw with Aldiko was intentional on the dev's behalf -- Aldiko is configured to install to external storage if it's available, and to store your library on external storage as well. You need to manually move it to internal storage.
The SD card unmounting bug is not limited to Aldiko, though it would seem that way if Aldiko was the only app you had installed in external storage. If you install anything onto your SD card in the future, you'll continue to see this bug... Many folks here have been able to turn the bug on and off by changing the Wi-Fi settings, which is why the recommended work around is to use AutomateIt to turn Wi-Fi on and off with the Screen.
spcagigas said:
What you saw with Aldiko was intentional on the dev's behalf -- Aldiko is configured to install to external storage if it's available, and to store your library on external storage as well. You need to manually move it to internal storage.
The SD card unmounting bug is not limited to Aldiko, though it would seem that way if Aldiko was the only app you had installed in external storage. If you install anything onto your SD card in the future, you'll continue to see this bug... Many folks here have been able to turn the bug on and off by changing the Wi-Fi settings, which is why the recommended work around is to use AutomateIt to turn Wi-Fi on and off with the Screen.
Click to expand...
Click to collapse
Thanks for the info. I'll keep all the apps in the internal storage.
You guys have been a big help.
I had the same issues. I installed the codefireX ROM and my SD card and WiFi work great now.