[Q] CM10 AKOP ROM SD card issue - Barnes & Noble Nook Tablet

HI Everybody,
I installed the AOKP CM10 ROM from this forum and the install went great. Thanks for that. Things were going along well but then it seems to have unmount the SD card. The card is mounted after a fresh reboot but then it is unmounted (and can't be remounted as far as I can tell) when the tablet goes to sleep (screen blank). The odd thing is that Root Explorer won't show the files but it has the correct usage of the card listed. It says the card is empty. If I reboot again, it's there and can be used. If it goes to sleep again the card is unmounted or put into the funky state. It's very odd.
I had CM7 (also from this forum) running on it previously and it did not have this issue. It had the WIFI problem when it when to sleep but the SD card was rock solid.
Any ideas about what I can do? The version of the ROM is cm10-jb-aokp acclaim unofficial 0.01 and I did upgrade CWM to the 6.0.1.5 version before starting the install.
Thanks in advance for the help.

ronch808 said:
HI Everybody,
I installed the AOKP CM10 ROM from this forum and the install went great. Thanks for that. Things were going along well but then it seems to have unmount the SD card. The card is mounted after a fresh reboot but then it is unmounted (and can't be remounted as far as I can tell) when the tablet goes to sleep (screen blank). The odd thing is that Root Explorer won't show the files but it has the correct usage of the card listed. It says the card is empty. If I reboot again, it's there and can be used. If it goes to sleep again the card is unmounted or put into the funky state. It's very odd.
I had CM7 (also from this forum) running on it previously and it did not have this issue. It had the WIFI problem when it when to sleep but the SD card was rock solid.
Any ideas about what I can do? The version of the ROM is cm10-jb-aokp acclaim unofficial 0.01 and I did upgrade CWM to the 6.0.1.5 version before starting the install.
Thanks in advance for the help.
Click to expand...
Click to collapse
try moving all ur apps that depend on the sd card to the tablet itself and that should solve your problems...

Thanks, I thought about that. I'm just wondering if it's a problem with CM10 or something else. I think I only have one app that is currently using the SD card. I'll move it and I'm pretty sure my issue will be worked around. Would be nice to have this fixed though. I put movies on the SD card to watch them on plane flights. If it's not really working it makes it hard to do that.
Thanks again.

ronch808 said:
Thanks, I thought about that. I'm just wondering if it's a problem with CM10 or something else. I think I only have one app that is currently using the SD card. I'll move it and I'm pretty sure my issue will be worked around. Would be nice to have this fixed though. I put movies on the SD card to watch them on plane flights. If it's not really working it makes it hard to do that.
Thanks again.
Click to expand...
Click to collapse
The SD card unmounting is a known bug in all the CM10 ROMs, and seems to be linked to WiFi waking and sleeping. The most common work-around is to manually turn off WiFi before your tablet goes to sleep. Alternatively, you can use an app like AutomateIt or Tasker to have WiFi turn off when the screen turns off. Since installing AutomateIt and configuring it to turn off WiFi when the screen turns off, I haven't had a problem with the SD card unmounting (on either the AOKP ROM or Demetris' CherryPick ROM).

spcagigas said:
The SD card unmounting is a known bug in all the CM10 ROMs, and seems to be linked to WiFi waking and sleeping. The most common work-around is to manually turn off WiFi before your tablet goes to sleep. Alternatively, you can use an app like AutomateIt or Tasker to have WiFi turn off when the screen turns off. Since installing AutomateIt and configuring it to turn off WiFi when the screen turns off, I haven't had a problem with the SD card unmounting (on either the AOKP ROM or Demetris' CherryPick ROM).
Click to expand...
Click to collapse
Thanks for that. However I have some new information. I was waiting to see if this turned out to be stable and it does seem to be working. So on the original work-around to move any apps from the SD card to the internal memory I had only one app, Aldiko reader. The odd thing was that even installing it the first time it wanted to install onto the SD card. There was no way to force the install to the internal storage. Anyway, once I moved the app everything started working. It's been 2 days now that the SD card has stayed mounted. Also, the WIFI has been working great moving between my home network and the work network. So I'm not sure what is going on with the Aldiko reader but it somehow was causing the SD card to unmount when the tablet went to sleep. Very odd.
Thanks for all the help. Everything is working and it's work great! I moved the launcher over to the Nova launcher today as I wanted more home sceens (not that I really needed them just to see if that would work and it does). I couldn't get the default CM10 launcher to do that, at least I couldn't find a configuration option to allow that.

ronch808 said:
Thanks for that. However I have some new information. I was waiting to see if this turned out to be stable and it does seem to be working. So on the original work-around to move any apps from the SD card to the internal memory I had only one app, Aldiko reader. The odd thing was that even installing it the first time it wanted to install onto the SD card. There was no way to force the install to the internal storage. Anyway, once I moved the app everything started working. It's been 2 days now that the SD card has stayed mounted. Also, the WIFI has been working great moving between my home network and the work network. So I'm not sure what is going on with the Aldiko reader but it somehow was causing the SD card to unmount when the tablet went to sleep. Very odd.
Thanks for all the help. Everything is working and it's work great! I moved the launcher over to the Nova launcher today as I wanted more home sceens (not that I really needed them just to see if that would work and it does). I couldn't get the default CM10 launcher to do that, at least I couldn't find a configuration option to allow that.
Click to expand...
Click to collapse
What you saw with Aldiko was intentional on the dev's behalf -- Aldiko is configured to install to external storage if it's available, and to store your library on external storage as well. You need to manually move it to internal storage.
The SD card unmounting bug is not limited to Aldiko, though it would seem that way if Aldiko was the only app you had installed in external storage. If you install anything onto your SD card in the future, you'll continue to see this bug... Many folks here have been able to turn the bug on and off by changing the Wi-Fi settings, which is why the recommended work around is to use AutomateIt to turn Wi-Fi on and off with the Screen.

spcagigas said:
What you saw with Aldiko was intentional on the dev's behalf -- Aldiko is configured to install to external storage if it's available, and to store your library on external storage as well. You need to manually move it to internal storage.
The SD card unmounting bug is not limited to Aldiko, though it would seem that way if Aldiko was the only app you had installed in external storage. If you install anything onto your SD card in the future, you'll continue to see this bug... Many folks here have been able to turn the bug on and off by changing the Wi-Fi settings, which is why the recommended work around is to use AutomateIt to turn Wi-Fi on and off with the Screen.
Click to expand...
Click to collapse
Thanks for the info. I'll keep all the apps in the internal storage.
You guys have been a big help.

I had the same issues. I installed the codefireX ROM and my SD card and WiFi work great now.

Related

[Q] Can't access my external sd card

Its been some time now that i can no loner access my external 2GB card (where avatar is stored). I am using the right drivers from this thread http://forum.xda-developers.com/showthread.php?t=728929... Not sure why all of the sudden i can't access it from my PC. Any clues?
So I assume you can still access your internal sd? I'll just start with that question.....
Sent from my pocket rocket!
OK, i opened up the phone, took out batter, ejected and re-inserted the sdcard. Reboot, now everything works fine. Weird...
azsamsancho said:
OK, i opened up the phone, took out batter, ejected and re-inserted the sdcard. Reboot, now everything works fine. Weird...
Click to expand...
Click to collapse
I have the same problem and trying this ^ trick didnt work.
Any solutions???
sLiKK said:
I have the same problem and trying this ^ trick didnt work.
Any solutions???
Click to expand...
Click to collapse
i guess try it again, leave out the battery for a minute

[cm7] internal build issues to date

I've been playing around with cm7 since release, internal build so I haven't run into the brick problem, but I have noticed a couple issues that I never had with a plain 1.4.0 rooted nook tablet.
First, I am losing wifi connectivity when I let the tablet sleep for more than a few minutes. Wifi will remain on, but just scans indefinitely while finding no networks. Sometimes I have to toggle wifi off and on several times before it starts working again. I have never had it lose connectivity while it was active and doing something, only when I set it down for several minutes and then wake it up.
Secondly the youtube app has locked up my tablet requiring a reboot several times. Sometimes this happens on the first video played, sometimes I can get up to 4 or 5 before the screen just goes black and all input is ignored. I would have left this info on the alpha release thread, but I can't post there yet and wanted to pass this info along. I'm having a great time fooling around with it, and so far these are the only issues I've noticed.
I haven't had the wi-fi isses that I've noticed. Only things I've ran into are those already being discussed in the dev forum - the near-brick experience and larger apps not installing.
In spite of almost bricking, I've still been using the alpha over the last couple days and am definitely loving the freedom and speed over stock. Can't wait to see how awesome it becomes with further development.
The wifi issue can be fixed by adjusting the settings. You just need to turn off wifi sleep. I think this is a long time cm7 bug and not unique to this build. I have reverted to stock for now so I can't guide you through it, but I am pretty sure it's an easy adjustment. (I couldn't go without hulu while in the middle of watching a series.)
StridAst said:
The wifi issue can be fixed by adjusting the settings. You just need to turn off wifi sleep. I think this is a long time cm7 bug and not unique to this build. I have reverted to stock for now so I can't guide you through it, but I am pretty sure it's an easy adjustment. (I couldn't go without hulu while in the middle of watching a series.)
Click to expand...
Click to collapse
Yep, you just go to Settings -> Wireless & Networks -> WiFi Settings then press the menu button. This brings up a small menu bar with two options. Tap "Advanced" and you can change your wifi sleep policy there.
imsoenthused said:
I've been playing around with cm7 since release, internal build so I haven't run into the brick problem
Click to expand...
Click to collapse
I believe the brick issue is in both the internal and SD release. Be sure to stay away from that SD card format button.
RadicalAns said:
I believe the brick issue is in both the internal and SD release. Be sure to stay away from that SD card format button.
Click to expand...
Click to collapse
Yeah, I'm not sure where the misconception that it's the SD-Card version causing the problem, unless it's just confusion because the problem was cause by an SDCard Format....I think the issue occurs in either, and I know for sure the internal is succeptible to it, because mine is internal and I was an early-bricker.
Ok, my fault for not being clear I guess. I have no conceivable reason to format an sd-card from within the cm7 alpha release so I have continued using it. Turning wifi to always on seems to have fixed my wifi issues, with a negative impact on battery life.
Youtube is still crashing my NT with regularity but that probably has something to do with the generally bad video performance.
imsoenthused said:
Ok, my fault for not being clear I guess. I have no conceivable reason to format an sd-card from within the cm7 alpha release so I have continued using it. Turning wifi to always on seems to have fixed my wifi issues, with a negative impact on battery life.
Youtube is still crashing my NT with regularity but that probably has something to do with the generally bad video performance.
Click to expand...
Click to collapse
Yeah, Celtic and Gonce are working on fixing the video drivers. Right now they're a bit iffy.
-Unable to install some .apks and some apps from the market.
-Color is weird in some games (like blue instead of green)
-B&N Nook app not syncing or not working at all.
I have not used Netflix on it yet so I'm not sure of the quality for that or youtube. I have no need to wipe SD card so will continue to explore any bugs.
youtube
imsoenthused said:
I've been playing around with cm7 since release, internal build so I haven't run into the brick problem, but I have noticed a couple issues that I never had with a plain 1.4.0 rooted nook tablet.
First, I am losing wifi connectivity when I let the tablet sleep for more than a few minutes. Wifi will remain on, but just scans indefinitely while finding no networks. Sometimes I have to toggle wifi off and on several times before it starts working again. I have never had it lose connectivity while it was active and doing something, only when I set it down for several minutes and then wake it up.
Secondly the youtube app has locked up my tablet requiring a reboot several times. Sometimes this happens on the first video played, sometimes I can get up to 4 or 5 before the screen just goes black and all input is ignored. I would have left this info on the alpha release thread, but I can't post there yet and wanted to pass this info along. I'm having a great time fooling around with it, and so far these are the only issues I've noticed.
Click to expand...
Click to collapse
I had problems with youtube too ... dolphin browser HD crashed when I clicked on a youtube link . Similar wi-fi problem too . Also the Wi-Fi indicator icon in status bar shows 1 or 2 bars after 10 min of active connection ....
Pretty stable otherwise . btw anyone tried 1080p mp4 videos in HW mode ???
Can someone please send me the internal build zip please
Sent from my BNTV250 using xda premium
CM7 beta bug report
Hello, I can't post to the development forum yet, but I thought the devs working on the next CM7 release for the NT should know about a potential bug. Also, I've only began using an android device about a month ago, so please forgive any noobish remarks. If after reading this, someone thinks it's important for the upcoming CM7 build release, please let someone on the development team know. Thanks.
I've been using an internal install of the beta build since it was released yesterday morning.
Everything has been working, very well, and I haven't been attempting to format sd cards from the device.
I've had one crash of ADW launcher when trying to add a playlist through the music player widget. I had a minor wifi hiccup that required toggling the wifi on and off to resolve. And a crash of the notification bar, when I attempted to click on an email notification message, which resolved by itself, seconds later.
The bug I'm most concerned about happened just about an hour ago. I noticed the battery getting low, so i plugged it in, powered on. It started charging, so i left it alone, a little while later, I looked at it, and the "n" on the charger had changed from orange to green, indicating a full charge. I awoke the nook from sleep to find that it was no longer charging, but that the battery was only about half charged. I unplugged it, and plugged it back in, but the status light was orange for only a second, before changing back to green, and no more charging.
I powered it off, and plugged it it (which of course made it turn back on /facepalm), but then powered it down through the power console as soon as CM7 booted. I has been powered off, and as far as i can tell charging normally, as indicated by the orange status of the charger's indicator. I intend to leave it powered off, and charging, until such time as the charging indicator turns green.
There may be some information here that is valuable to the Developers and you have attempted to articulate everything well.
However, is there some reason you chose to create a new thread instead of posting your issue In This One?
Perhaps the moderators can combine these threads but I'm sure the developers are more apt to look in one thread then trying to chase down multiple ones.
Good luck with your issues.
Aw crud. Totally didn't see that thread. If a mod could please combine, it would be appreciated.
Maybe the bug thread should be stickied?
Sent from my SAMSUNG-SGH-I997 using Tapatalk
daedricgeek said:
I had problems with youtube too ... dolphin browser HD crashed when I clicked on a youtube link . Similar wi-fi problem too . Also the Wi-Fi indicator icon in status bar shows 1 or 2 bars after 10 min of active connection ....
Pretty stable otherwise . btw anyone tried 1080p mp4 videos in HW mode ???
Click to expand...
Click to collapse
I've been having crashing/force closes trying to stream video from sites like youtube.....but with a more mature content....if you know what I mean.
If I'm being too obscure....basically I can't stream porn onto it. Which, imo, is a device-killing bug!
(not really)
On the plus side, it seems like it charges pretty well through a USB connection now, where, if I'm not mistaken, it would not do so on stock. Although I only had stock for like 3 hours before zerging it, so I can't compare it very well....
I was also sitting up waiting on the release of this and have been running it every since then. the only real bugs I have seen is the unable to install alot of apps from the market as it gives the cant write to sdcard which is documented in the dev forums. my wireless does not seem to drain my battery much at all but the device itself never wanted to go into sleep mode unless I forced it into sleep. I changed the screen timeout and changed it right back and the issue resolved itself. Wireless does commonly go from full signal to 2 bars though but even when at 2 bars the connection seems fine and no loss of speed. as far as apps over 20 meg. the only ones I tried I had the apk file stored on my sd card and installed from there and they all installed just fine.
the device seems way more responsive now and I am absolutely loving it although i do miss the nook reader app itself and the one I downloaded from the market gives ab internal error : exception executing the command when I try and sign in Cant wait for the next release alpha or beta I would love to test it.
nocmadman said:
the device seems way more responsive now and I am absolutely loving it although i do miss the nook reader app itself and the one I downloaded from the market gives ab internal error : exception executing the command when I try and sign in Cant wait for the next release alpha or beta I would love to test it.
Click to expand...
Click to collapse
Go to the "Nook" folder on your sd card, then delete it. then try to sign in on the nook reader. This has worked for others who now have the nook app up and running on cm7
StridAst said:
Go to the "Nook" folder on your sd card, then delete it. then try to sign in on the nook reader. This has worked for others who now have the nook app up and running on cm7
Click to expand...
Click to collapse
Deleted nook folder tested same issue. Uninstalled the app and re installed it and now working thank you so much.
joecareytm said:
-Unable to install some .apks and some apps from the market.
-Color is weird in some games (like blue instead of green)
-B&N Nook app not syncing or not working at all.
I have not used Netflix on it yet so I'm not sure of the quality for that or youtube. I have no need to wipe SD card so will continue to explore any bugs.
Click to expand...
Click to collapse
Mostly I'm seeing the occasional app not installing. Every time it has been because "sdcard is not mounted". Even though it obviously it mounted. Aldiko reader is my current villain in this regard. No Wireless problems, but I changed the advanced settings right away. Interface is nice and fast.
Does anyone have any problems with installing games like need for speed
Sent from my PG86100 using xda premium

[Q] Blackend rom random reboots?

I am running Blackend 2.5.4 with AnthraX 2.6.38.8 and I have a PNY 32GB class 10 micro sd card. Has anyone else exprienced alot of random reboots when device is accessing apps or items from SD card? I have been running this rom for about 2 months and when I moved all my movable apps to the sd card, i would reboot about 10 to 15 times a day. First I thought it was a bad install, so I reflashed the rom. Same issues started after about 3 days of use. I reflashed the rom again a week ago, however this time I am left the apps on the internal memory. My 10 to 15 random reboots have reduced down to 1 to 2. These reboots only occur when the device is accessing MP3 located on the SD card. Any insights what could be causing this issue?
Try this to see if it will help.
http://forum.xda-developers.com/showpost.php?p=10878511&postcount=8311
#Root-Hack_Mod*Always\
Didnt work
Still was having the same issue as before. I also notice that phone will also freeze and reboot when the screen rotated via the accelerometer. Looks like I will be moving away from this rom. Which sucks because it was a nice skin with cool add on features.
Try flashing a different kernel.
#Root-Hack_Mod*Always\
Webkw to ceady
Oh, u

CM9 and wifi dropping

I installed CM9 alpha 0.03 and the wifi will not stay connected. The routers that worked perfectly with CM7 will not work with CM9, anyone else had/having trouble with wifi when using CM9?
Yes!! I had the same issue when I loaded it last night. went back to cm7 till the 3.0 kernal comes out.
Really, I haven't had this problem at all. Try turning the router. Also what wifi security type is it?
Sent from my Team A CM9 Alpha 0.03 Nook Tablet
I rebooted the NT a couple times and so far (2 hours) the wifi is working as it should. I have been using this at work on two wireless routers and I'll be trying it at home soon. I'll keep my fingers crossed, I hope the wifi problem was temporary. I'm loving CM9 otherwise.
Edit: The wifi security is WPA2.
One little update on my wifi problem. The wifi was working perfectly at work and at home until I ran an app that needed the sd card mounted (I figured it was mounted at boot but it wasn't) so I removed/replaced the sd card and bam, the wifi stopped working. I repeated this 5 times, same result every time, so I need to find out what is causing this problem.
I'm having the same problem. My wifi drops out when I run certain apps. For me, it's dropped out when running Gmail or any mail app, and BBC World News app so far.
This was not a problem at all until I changed my email passwords. Probably a coincidence but it happened at the exact same time.
I'd just like to give an update to say that this randomly stopped happening as randomly as it started. I've no idea what the cause is.
Sent from my Nook using XDA
I am also having a problem. I am running CM9 externally and my wifi was working great until one day it just would not turn on. I tried rebooting it to no avail. Wifi still works in CM7 and stock ROM. Anybody have an idea to fix it? Thanks.
External is susceptible to getting corrupted. I would backup by TiB folder first... then I would just reformat the card ( sdformatter 3.1 ) and re make it. Hey, try Jelly Bean !
old_fart said:
External is susceptible to getting corrupted. I would backup by TiB folder first... then I would just reformat the card ( sdformatter 3.1 ) and re make it. Hey, try Jelly Bean !
Click to expand...
Click to collapse
Well I cleared data and reflashed. Everything is working again. Just curious, I thought the JB build for NT was still beta? And just to got totally noob on you, how would I flash it to a sdcard partition? Thanks for the help.
nojogray said:
Well I cleared data and reflashed. Everything is working again. Just curious, I thought the JB build for NT was still beta? And just to got totally noob on you, how would I flash it to a sdcard partition? Thanks for the help.
Click to expand...
Click to collapse
My bad. Jelly Bean is not 'external sd card' ready. Those guys are super smart, so maybe, hopefully, it will be soon.
.
I wonder if Succulent is working on it also ?

[Q] Slow write speeds on Resurrection Remix v2.4.1

Hello Guys,
Resurrection Remix 2.4.1 is an amazing rom, no complains except one.
The write speed while transferring from PC to Phone (Internal SD or External SD) is worse than a class 2 card speed.
I have tried everything wipe/clear/fix permissions/different cables/different PC and the issue is still there. 1.2 - 1.5 mb/sec is horrendous.
My class 10 card feels like a waste now. So is there anything I am missing here?
Thanks!
I'm not use RR for a long time... but what settings are you using to connect with?
In System settings> Storage > click menu button and usb connection
There are 2 settings people usually use: MTP or Mass Storage.
MS is suppose to be faster but doesn't work properly on most roms I think... so MTP is often the better case.
Other than that... you're better off asking them on the RR thread (not sure if you can with your low post count **because most users don't look in Q&A).. but they have a website now that you shouldn't have problems posting on http://www.resurrectionremix.com/index.php
cyberboob said:
I'm not use RR for a long time... but what settings are you using to connect with?
In System settings> Storage > click menu button and usb connection
There are 2 settings people usually use: MTP or Mass Storage.
MS is suppose to be faster but doesn't work properly on most roms I think... so MTP is often the better case.
Other than that... you're better off asking them on the RR thread (not sure if you can with your low post count **because most users don't look in Q&A).. but they have a website now that you shouldn't have problems posting on http://www.resurrectionremix.com/index.php
Click to expand...
Click to collapse
I'm experiencing the same issue. Thanks for the heads up on the RR site, I too don't have enough posts to reply in the RR thread, so that's a massive help. Site is blocked at work but I'll post there this evening.
In the mean time, I suspect the issue may be an ongoing problem based on the fact that it took multiple versions to get UMS to even see the external SD. Write speeds to the internal SD seem fine as ever, so I'd assume they're still ironing out the issues with UMS and external SDs.
@ OP: I only just switched back to UMS from MTP since the problems with UMS and external SD cropped up a few versions of RR ago. Is this the first version of AOKP RR to have working fully working UMS with the external SD? If not, were 2.3/2.4 etc. any faster when writing to the external SD?
cyberboob said:
I'm not use RR for a long time... but what settings are you using to connect with?
In System settings> Storage > click menu button and usb connection
There are 2 settings people usually use: MTP or Mass Storage.
MS is suppose to be faster but doesn't work properly on most roms I think... so MTP is often the better case.
Other than that... you're better off asking them on the RR thread (not sure if you can with your low post count **because most users don't look in Q&A).. but they have a website now that you shouldn't have problems posting on RR.
Click to expand...
Click to collapse
MTP is enabled by default and it is as slow as USB Mass Storage.
SD tools shows speeds upto 9MB/s - Write and 50 MB/s - Read! (Shocking)
Heading off to the RR website. Thanks!
Pegasi_Delta said:
I'm experiencing the same issue. Thanks for the heads up on the RR site, I too don't have enough posts to reply in the RR thread, so that's a massive help. Site is blocked at work but I'll post there this evening.
In the mean time, I suspect the issue may be an ongoing problem based on the fact that it took multiple versions to get UMS to even see the external SD. Write speeds to the internal SD seem fine as ever, so I'd assume they're still ironing out the issues with UMS and external SDs.
@ OP: I only just switched back to UMS from MTP since the problems with UMS and external SD cropped up a few versions of RR ago. Is this the first version of AOKP RR to have working fully working UMS with the external SD? If not, were 2.3/2.4 etc. any faster when writing to the external SD?
Click to expand...
Click to collapse
The previous version (2.3) worked fine for me. Dont know what changed after 2.4.

Categories

Resources