Hi all,
I just installed Das BAMF 2.0-5 and I have my TB connected to my laptop via USB. My laptop then proceeds to search for a corresponding driver to "Android Phone". My phone will not get recognized by my laptop because no driver is found/installed onto my laptop. Before flashing Das BAMF, my TB was working perfectly fine - rooted w/the leaked GB rom...I had no driver issues whatsoever there.
The only was I can access my SD card storage so far is by booting into Clockwork and then mounting via USB.
Please help!!! Anything is deeply appreciated.
I did the workaround supplied before which is putting it in internet passthrough mode then switching to disk drive. I still get the message telling me to download the driver for a desire HD but ti works fine on my system.
mau5trap said:
Hi all,
I just installed Das BAMF 2.0-5 and I have my TB connected to my laptop via USB. My laptop then proceeds to search for a corresponding driver to "Android Phone". My phone will not get recognized by my laptop because no driver is found/installed onto my laptop. Before flashing Das BAMF, my TB was working perfectly fine - rooted w/the leaked GB rom...I had no driver issues whatsoever there.
The only was I can access my SD card storage so far is by booting into Clockwork and then mounting via USB.
Please help!!! Anything is deeply appreciated.
Click to expand...
Click to collapse
Connect your Thunderbolt via usb cable and then when the prompt comes up select "internet pass-through" then hit done and ok. Then pull notification bar down and choose "select to change usb connection type", select "disk drive" and hit done. Wait a second and you should see that you are connected to your pc. Hope this helps, it will work.
Pzyborg said:
Connect your Thunderbolt via usb cable and then when the prompt comes up select "internet pass-through" then hit done and ok. Then pull notification bar down and choose "select to change usb connection type", select "disk drive" and hit done. Wait a second and you should see that you are connected to your pc. Hope this helps, it will work.
Click to expand...
Click to collapse
Thanks for the reply.
I tried this and it didn't work. I'm ultimately trying to get my usb tethering working again. Wireless tethering works fine, but the usb tethering that worked for me pre-Das BAMF via SwitchPro Widget didn't respond when trying to toggle the widget. I also tried Wired Tether for Root Users - the network creation goes through and my mac address is grabbed by my TB, but no internet connection... any ideas? I'd like to just have USB tethering (preferably one click w/o third party apps i.e. PDAnet) and disk drive working.
mau5trap said:
Thanks for the reply.
I tried this and it didn't work. I'm ultimately trying to get my usb tethering working again. Wireless tethering works fine, but the usb tethering that worked for me pre-Das BAMF via SwitchPro Widget didn't respond when trying to toggle the widget. I also tried Wired Tether for Root Users - the network creation goes through and my mac address is grabbed by my TB, but no internet connection... any ideas? I'd like to just have USB tethering (preferably one click w/o third party apps i.e. PDAnet) and disk drive working.
Click to expand...
Click to collapse
Is there a reason to use the one these apps instead of the built-in pass-through feature?
Try gingeritis it has less problems in my opinion
im having the same problem, recently went Das BAMF 3.0 RC1 and i've tried the suggestion of internet pass through and swapping back to mount drive and still nothing.
When initially rooting my phone, I just had to manually install HTC Sync drivers and then do the internet passthrough workaround and that did it for me. Have you tried that? You can find the Sync drivers pretty easily through Google.
Related
usbsettings is a software that enables you to connect your Athena mobile 5 or 6 and use Athena as usb mass storage! just copy it to your device and run ....
lolik12345 said:
usbsettings is a software that enables you to connect your Athena mobile 5 or 6 and use Athena as usb mass storage! just copy it to your device and run ....
Click to expand...
Click to collapse
What's the difference between this and WM5Storage?
Excellent..
Good.. Work well..
700MB -> About 5~6Min..
Program is too small, so I like it..
Thanks..
Thanks! It works great!!! There is even no need to reconnect the cable. Simple and fast. Do you know who is the developer?
Thanks. Works very well.
There are three options in the setting. Turbo ActiveSync, Normal ActiveSync, and Mass USB disk.
I set it to Turbo and thought that transferring files is a lot quicker than before now.
WIth Mass USB, I could only see the device but not the storage card or microdrive. Is this normal? Is there a way to see all three?
Thanks man ) Write speed is 3,3 mb\s, read is 3,5
Nice program, I find it works a bit better than WM5torage.
BUT !
Do not connect as a USB mass storage device when using Audio Manager for it will (and does, I tested) f*ck Audio Manager up (logical, since Audio Manager will detect that the microdrive's been used by another application and try to refresh its library, endlessly since the lock isn't removed until the device is disconnected).
Finally something that works better than WMStorage... but can't switch to storage card only the microdrice... even without this option i finally can replace my usb stick with a usb cable...
Yes! Hurrah!
Unlike WM5torage, in ANY of its versions, this works!
Even got Turbo Activesync working using the instructions on the last post on that thread linked above: when Generic RNDIS is detected and Windows asks for a driver, tell it to search in c:\program files\microsoft activesync\drivers and that did the job for me. Don't know if it's actually any faster than standard Activesync, but it couldn't be slower.
Thanks very much!
Thank you veru match
1G In 9m >>>>>
JonSlater said:
Even got Turbo Activesync working using the instructions on the last post on that thread linked above: when Generic RNDIS is detected and Windows asks for a driver, tell it to search in c:\program files\microsoft activesync\drivers and that did the job for me. Don't know if it's actually any faster than standard Activesync, but it couldn't be slower.
QUOTE]
Okay, a follow up to that. The Turbo mode works by activating the network-via-USB. It works very well indeed here on my work PC, but doesn't on my home PC. It connects, but doesn't start the synch and just sticks on Looking for Changes.
I don't suppose anyone has a fix for that? Normal practice seems to be to untick the "Enable advanced network functionality" box, which is what this mode uses.
Click to expand...
Click to collapse
USB Storage
I have two issues: When I activate the attached USB file it disables Active Sync and secondly My computer doesn't seem to recognize it as a storage drive (I must be missing some type of PC USB file). Any suggested solutions would be greatful.
there will be a new utility in 4.0 of my roms. it is directly from htc.
It is possible to connect a flash disc to my athena?because i need space and the flash drives are bigger then the memory card.thx
Yes . You can - Athena has USB Host funcionality - You've to use 4in1 cable .
Pawel062 said:
there will be a new utility in 4.0 of my roms. it is directly from htc.
Click to expand...
Click to collapse
Can we find the utility from HTC without the ROM? I appreciate your work but I'm not a fan on changing my baby's ROM.
I trying to find references on Google for such tool without success.
Thank yopu in advance,
mahjong
Please everyone excuse me for my ignorance....but what does this software/utility do?
I get the picture that it download directly to the Microdrive via active sync...is that right?
Kenjari said:
Please everyone excuse me for my ignorance....but what does this software/utility do?
I get the picture that it download directly to the Microdrive via active sync...is that right?
Click to expand...
Click to collapse
No NOT via active sync and that is the beauty ! you can go to any modern computer and *without* installing active sync get the microdrive to show up as a USB memory stick and transfer data.
Great!Thanks!
JonSlater said:
Okay, a follow up to that. The Turbo mode works by activating the network-via-USB. It works very well indeed here on my work PC, but doesn't on my home PC. It connects, but doesn't start the synch and just sticks on Looking for Changes.
I don't suppose anyone has a fix for that? Normal practice seems to be to untick the "Enable advanced network functionality" box, which is what this mode uses.
Click to expand...
Click to collapse
Sounds like a firewall issue. Try without firewall.
The last while my HD2 wont connect with my desktop. I connect with the USB and the phone just charges i cant physically move files unless i change to Disk drive. I thought this might have been a problem with the ROM i installed (Dutty's Creme De la Creme) But the phone connects to my laptop as it normally would and any other computer.
I recently did a fresh install of my pc OS and i still seem to have the same problem i still cant locate the phone. (unless i choose disk drive)
Iv tried everything that i can think of to fix it but nothing. Can anyone shed any light
Cheers,
russe
go to settings, connections, USB to PC and untick the box for faster data sync.
"pair" ur phone with ur PC and after that tick the box again....
seriously i tried absolutely everything to try fix this, And that was all i needed to do ha. Thanks v much worked brilliantly
phone wont contect to mobile device center
i flashed NRG Cookie Rom Aug 6 and now i can no longer connect. it shows in my device manager as USB unrecognized. I've tried uninstalling and reinstalling windows mobile device center still nothing! First this has happened to me UGH! is there a stand alone HD2 driver? sorry i forgot to mention that i'm TOMUS
I loaded Vegan-tab 5.1.1 and everything is working great, except that i can't see my tablet as an external device anymore while connected by usb to my computer. I do see the sdcard & sdcard2 files from the ifilemanager.
Is there a way to fix this?
I noticed something similar and it turned out to be me. I was expecting the "USB connected" message when I plugged it in. However, when I looked at the top bar, there it said "USB". I pulled down the bar, clicked on USB CONNECTED and I was back in business.
Possible for you as well? Something to check...
Me too
I'm having a similar problem with Vegan 5.1. The tab is connecting and I'll go to select "Turn on File Sharing" or whatever the option is and everything will appear hunkydory. However, if I attempt to transfer a file it will hang up for a while (on the PC side) and then eventually the connection will be broken. If I look, there is a file of the right size on the internal sd, but I'm not willing to fool around with them in case they're corrupted.
Somebody please help! I've had a good search and can't find any recent posts on this topic.
My trouble shooting advice :
A) 5.1.1 has a pull down menu that you have to "active USB"
B) I installed android USB drivers on my PC just in-case so i wouldn't have connection issues.
C)May need a "powered" USB port like Portable HDD .. example: (MAC keyboard USB port isn't powered).
Vegan by default after install leaves system in USB debugging mode. Go into setup/ applications/development and turn it off.
Sent from my VEGAn-TAB-v1.0.0b5.1.1 using Tapatalk
Thanks. That solved it.
lgkahn said:
Vegan by default after install leaves system in USB debugging mode. Go into setup/ applications/development and turn it off.
Sent from my VEGAn-TAB-v1.0.0b5.1.1 using Tapatalk
Click to expand...
Click to collapse
This was great info. Thanks
So I updated to gingerremix 2.0-5 this morning and had to reinstall the myhtc driver for adb to work. After the phone was flashed I cant get my computer to read it as a disk drive. I am using win 7 ultimate 64bit. Any help would be greatly appreciated.
nevermind it worked by uninstalling the phone completely from windows and letting it reinstall. it still says an MTP driver isnt installed but it now works.
Did it take you to a download for the MyTouch driver?
When I searched one of the other threads it said to use internet pass through and it worked for me. Mounts no problem now
when pluggin in your USB, select internet pass through. once it shows a connection on your notification bar drop your menu click on the usb connection icon and then select disk drive. it will then show
Hi guys,
Please help me out. I'm about to pull my hair out!!
I installed Kies and the USB drivers, but everytime I try to USB tether, Windows 7 fails to install the driver. I tried uninstalling the Samsung drivers on the computer where it won't work, but it still won't install.
The weird thing is that I plugged in the phone into another computer also running win 7 and that computer easily found the right driver and installed it. Didn't need to install Samsung drivers.
What happens is the driver is downloaded, tries to install, then gives me an error. I attached an image of the error I get. Any advice would be appreciated!
There's a program called driver magician that allows you to take and save a driver off one computer and restore it in another.
If you don't go that route you can always leave the phone plugged in and open hardware manager. Then delete your phone. When it asked choose to delete the driver with it.
Then try it again.
Sent from my páhhōniē
Thanks. That didn't work, but I figured it out!
For anyone who has a similar problem with installing a driver, open up setupapi.dev.log in notepad which is located in c:\windows\inf -- it's kind of a labyrinth to navigate, but I found that I was missing a file which it was looking for. I then found that file on another computer, put it into c:\windows\inf and it worked. There were two missing files actually, usb8023x.sys and rndismpx.sys. Took me all day but finally got USB tethering working.
Unfortunately wifi tethering doesn't work (no internet connection) -- anyone get that?
Nice work.
Never had issues with wifi tethering. Have you made any changes to your phone? Root, rom, ect?
Sent from my páhhōniē
I'm on stock ROM but I did root it to delete the tetheringmanager apk
When I was on stock I did that too with no issues. Try downloading a tethering app from the market like barnacle and see if that makes a difference.
Sent from my páhhōniē