So I updated to gingerremix 2.0-5 this morning and had to reinstall the myhtc driver for adb to work. After the phone was flashed I cant get my computer to read it as a disk drive. I am using win 7 ultimate 64bit. Any help would be greatly appreciated.
nevermind it worked by uninstalling the phone completely from windows and letting it reinstall. it still says an MTP driver isnt installed but it now works.
Did it take you to a download for the MyTouch driver?
When I searched one of the other threads it said to use internet pass through and it worked for me. Mounts no problem now
when pluggin in your USB, select internet pass through. once it shows a connection on your notification bar drop your menu click on the usb connection icon and then select disk drive. it will then show
Related
The last while my HD2 wont connect with my desktop. I connect with the USB and the phone just charges i cant physically move files unless i change to Disk drive. I thought this might have been a problem with the ROM i installed (Dutty's Creme De la Creme) But the phone connects to my laptop as it normally would and any other computer.
I recently did a fresh install of my pc OS and i still seem to have the same problem i still cant locate the phone. (unless i choose disk drive)
Iv tried everything that i can think of to fix it but nothing. Can anyone shed any light
Cheers,
russe
go to settings, connections, USB to PC and untick the box for faster data sync.
"pair" ur phone with ur PC and after that tick the box again....
seriously i tried absolutely everything to try fix this, And that was all i needed to do ha. Thanks v much worked brilliantly
phone wont contect to mobile device center
i flashed NRG Cookie Rom Aug 6 and now i can no longer connect. it shows in my device manager as USB unrecognized. I've tried uninstalling and reinstalling windows mobile device center still nothing! First this has happened to me UGH! is there a stand alone HD2 driver? sorry i forgot to mention that i'm TOMUS
Hi there,
I have just started using the FRX06 bundle on my HTC touch pro2, but am not able to connect to Windows Vista using USB. The phone is found as a disk drive (but I am unable to open it, it asks me to place a replecable disk), on the phone the USB sign is visible and it gives me the oppurtunity to enable USB connections (when sliding the topicons downwards over the screen. But when I hit the USB enable button, it just keeps thinking about it and not connecting whatsoever. In device manager it also says Android phone with the ADB interface installed, no exclamation marks anywhere, but still no luck. Anybody an idea what could be going wrong? There is nothing wrong when connecting with windows mobile, so hardware should be ok..
Thanks, Wouter
wauwter said:
Hi there,
I have just started using the FRX06 bundle on my HTC touch pro2, but am not able to connect to Windows Vista using USB. The phone is found as a disk drive (but I am unable to open it, it asks me to place a replecable disk), on the phone the USB sign is visible and it gives me the oppurtunity to enable USB connections (when sliding the topicons downwards over the screen. But when I hit the USB enable button, it just keeps thinking about it and not connecting whatsoever. In device manager it also says Android phone with the ADB interface installed, no exclamation marks anywhere, but still no luck. Anybody an idea what could be going wrong? There is nothing wrong when connecting with windows mobile, so hardware should be ok..
Thanks, Wouter
Click to expand...
Click to collapse
USB connection does NOT WORK, at this moment...
You can use DroidExplorer.
Tilt 2 by Tapatalk
Yes, adb is the only way to use USB at the moment.
Please read the FAQ.
wauwter said:
Hi there,
I have just started using the FRX06 bundle on my HTC touch pro2, but am not able to connect to Windows Vista using USB. The phone is found as a disk drive (but I am unable to open it, it asks me to place a replecable disk), on the phone the USB sign is visible and it gives me the oppurtunity to enable USB connections (when sliding the topicons downwards over the screen. But when I hit the USB enable button, it just keeps thinking about it and not connecting whatsoever. In device manager it also says Android phone with the ADB interface installed, no exclamation marks anywhere, but still no luck. Anybody an idea what could be going wrong? There is nothing wrong when connecting with windows mobile, so hardware should be ok..
Thanks, Wouter
Click to expand...
Click to collapse
Please read the FAQ. USB mass storage is known not to work in any configuration using loopback images (e.g. system.ext2/data.img)
It sort of works (will mount to the computer, but you can't remount the SD within Android) if you partition the SD card with some native ext2 partitions. (system on partition 3, data on partition 4)
Hi all,
I just installed Das BAMF 2.0-5 and I have my TB connected to my laptop via USB. My laptop then proceeds to search for a corresponding driver to "Android Phone". My phone will not get recognized by my laptop because no driver is found/installed onto my laptop. Before flashing Das BAMF, my TB was working perfectly fine - rooted w/the leaked GB rom...I had no driver issues whatsoever there.
The only was I can access my SD card storage so far is by booting into Clockwork and then mounting via USB.
Please help!!! Anything is deeply appreciated.
I did the workaround supplied before which is putting it in internet passthrough mode then switching to disk drive. I still get the message telling me to download the driver for a desire HD but ti works fine on my system.
mau5trap said:
Hi all,
I just installed Das BAMF 2.0-5 and I have my TB connected to my laptop via USB. My laptop then proceeds to search for a corresponding driver to "Android Phone". My phone will not get recognized by my laptop because no driver is found/installed onto my laptop. Before flashing Das BAMF, my TB was working perfectly fine - rooted w/the leaked GB rom...I had no driver issues whatsoever there.
The only was I can access my SD card storage so far is by booting into Clockwork and then mounting via USB.
Please help!!! Anything is deeply appreciated.
Click to expand...
Click to collapse
Connect your Thunderbolt via usb cable and then when the prompt comes up select "internet pass-through" then hit done and ok. Then pull notification bar down and choose "select to change usb connection type", select "disk drive" and hit done. Wait a second and you should see that you are connected to your pc. Hope this helps, it will work.
Pzyborg said:
Connect your Thunderbolt via usb cable and then when the prompt comes up select "internet pass-through" then hit done and ok. Then pull notification bar down and choose "select to change usb connection type", select "disk drive" and hit done. Wait a second and you should see that you are connected to your pc. Hope this helps, it will work.
Click to expand...
Click to collapse
Thanks for the reply.
I tried this and it didn't work. I'm ultimately trying to get my usb tethering working again. Wireless tethering works fine, but the usb tethering that worked for me pre-Das BAMF via SwitchPro Widget didn't respond when trying to toggle the widget. I also tried Wired Tether for Root Users - the network creation goes through and my mac address is grabbed by my TB, but no internet connection... any ideas? I'd like to just have USB tethering (preferably one click w/o third party apps i.e. PDAnet) and disk drive working.
mau5trap said:
Thanks for the reply.
I tried this and it didn't work. I'm ultimately trying to get my usb tethering working again. Wireless tethering works fine, but the usb tethering that worked for me pre-Das BAMF via SwitchPro Widget didn't respond when trying to toggle the widget. I also tried Wired Tether for Root Users - the network creation goes through and my mac address is grabbed by my TB, but no internet connection... any ideas? I'd like to just have USB tethering (preferably one click w/o third party apps i.e. PDAnet) and disk drive working.
Click to expand...
Click to collapse
Is there a reason to use the one these apps instead of the built-in pass-through feature?
Try gingeritis it has less problems in my opinion
im having the same problem, recently went Das BAMF 3.0 RC1 and i've tried the suggestion of internet pass through and swapping back to mount drive and still nothing.
When initially rooting my phone, I just had to manually install HTC Sync drivers and then do the internet passthrough workaround and that did it for me. Have you tried that? You can find the Sync drivers pretty easily through Google.
I have a stock Evo View running Honeycomb 3.2.1. Interestingly, neither of my computers, both mac and pc, will detect my tablet when I connect it by USB. This worked just a few weeks ago when I moved some files onto the device. The tablet charges through USB, but I do not get the notification option to use as USB storage. Within "settings > connect to pc" I've tried a number of configurations (default configuration type = disk drive, charge only) and I have also tried checking and unchecking "ask me about USB connection type whenever I connect my tablet to a PC." Nothing new happened.
Additionally, on the mac, I have the Android File Transfer app installed. When I open that i get a notification that says "No Android Device Found"
Coincidentally, I recently installed the Dropbox desktop beta for Mac which automatically detects pictures on a camera and uploads them to Dropbox. When I connected my device, Dropbox checked my device for pictures because it recognizes it as a camera. I instantly got a system error message saying that my device was not ejected properly. However, the mac never detected my device as a drive. Following that, I tried to connect to my PC and all it does is charge. My PC also does not detect my tablet as a drive. I'm thinking the new dropbox desktop client may have been the culprit for breaking my usb connection between my tablet and mac.
Has anyone else experience this problem? If not, is there a way to rebuild my usb connection between my tablet, mac, and pc?
well i would try uninstalling dropbox
Also in Settings/Applications/Development/Usb debugging should be checked.
Thanks. Appreciate the advice.
I did uninstall dropbox, on the View and on the Mac. That didn't help.
USB Debugging was checked. I can see my device in fastboot and adb. However, neither Mac nor PC will detect my tablet and allow me to mount as a hard drive.
I did a factory data reset and that worked. Both computers will recognize the View and I am receiving the notification "charge only, hard disk, htc sync, etc." again.
I wanted to break the usb connection again to confirm that it was in fact either dropbox's android beta, desktop beta, or a combination of the two. I am fairly certain that something broke the first time around because the desktop beta was able to scan my device for photos without my permission to mount the View as a hard disk. But now I'm having trouble proving this since I haven't been able to break the connection again.
I installed CM9 on my touchpad, the first build available, but when i try to plug it into my computer, the driver installation keeps failing and i cant mount it as a usb drive to be able to transfer the new CM9. Is there any way i can transfer the zip file without pluging it into my computer?
Also would anybody know why the drivers keep failing? in on win7 64bit
go to storage top right click the dots, enable mtp drivers
I love you!
I don't know why this isn't just pre set everyone will be using this feature.