I installed CM9 on my touchpad, the first build available, but when i try to plug it into my computer, the driver installation keeps failing and i cant mount it as a usb drive to be able to transfer the new CM9. Is there any way i can transfer the zip file without pluging it into my computer?
Also would anybody know why the drivers keep failing? in on win7 64bit
go to storage top right click the dots, enable mtp drivers
I love you!
I don't know why this isn't just pre set everyone will be using this feature.
Related
Hey.
I just got this phone, and man I cant get to USB mass storage!!
I got it to work once, but until then it is not working at all......
The USB icon keeps going on and off on the phone and I dont know how to fix this.....
Any help please?
awaisuk said:
Hey.
I just got this phone, and man I cant get to USB mass storage!!
I got it to work once, but until then it is not working at all......
The USB icon keeps going on and off on the phone and I dont know how to fix this.....
Any help please?
Click to expand...
Click to collapse
If you are on Windows: Samsung drivers installed?
Did you try different USB port?
Is USB debugging enabled? Settings->Applications->Development
What are the USB settings on the phone? Settings->Applications->USB settings
Mass storage mode doesn't work for me on Win 7 x64 I just use the media player setting and it works the same way as mass storage should.
It works for me just fine. One time it did do the flickering USB icon thing, but that turned out to be because the cable that I was using was going bad. It sounds like this may be what's going on in your case?
I clipped this from a post I made a few months ago...
Stresa said:
For those of you having a problem with Windows 7 recognizing your Vibrant ... here is how I fixed it on my system.
*Note: You do not need to load any special USB drivers for your phone to be recognized in Mass Storage mode in Windows 7.
*Warning: You follow these instructions at your own risk ... no screaming at me if you try it and something gets screwed up!
1) Navigate your way into the Device Manager / Universal Serial Bus Controller
2) Uninstall the device(s) "USB Root Hub" (My system had 2 listed)
3) You will lose mouse and keyboard control (because you just removed the USB Hubs)
4) Reset your PC and allow Windows to boot normally.
5) Go back to the device manager and wait for all of the "!" marks to go away as windows re-installs the USB Hubs and reinitializes all of your devices.
6) Make sure your Vibrant is in mass storage mode and has USB debugging OFF
7) Plug in your Vibrant via the USB cable and be amazed as windows recognizes your device and assigns the drive letters. After you select the mount option on your phone you will have normal access via windows explorer.
Hope this helps some of you out there !!!
~Stresa
Click to expand...
Click to collapse
Sent from Samsung Vibrant
Thanks for that I tried, but I still cant get anything to work!!
So frustrating.....whats wrong with this?
alright so my normal computer broke, so now i am using a ****ty lenovo ideapad
s10. i tried connecting usb, downloading drivers from samsung.com and here, and still no luck. I can mount the usb storage from my phone but im having trouble with download mode, the computer doesnt recognize it, and therefore ODIN doesnt. Right now im gunna flash all thru my phone but i would really like to get it working on the computer, any help ?
windows xp btw
One thing you can try that worked for me on a couple of machines that wouldn't recognize dl mode is the following. Download the 64 bit drivers, can be found through the vibrant bible, and unzip the folder, should come in .zip format. Then put your phone into dl mode, plug it into your computer, and let it detect the devices and not load the drivers. Once its recognized the unknown device, access your windows device manager manager, right click on the unknown device, choose update driver, do not let windows auto detect it, rather, manually install the driver by selecting "install from a specific location", then "include this location in the search" and use the browse button to navigate to the driver folder you unzipped. Let it do its thing and should then be recognized in dl mode.
I have installed the 10.1.3 Cyanogenmod Rom on my Nook Tablet, and everything was working normally. Specifically, I could connect it to my Winodws XP system via USB and transfer data via MTP. I wanted to repartition the internal storage from the 11 and 1 GB shared. The process required installed ABD, and I didn't understand at first that this processes required ADB access in recovery mode. I was able to repartition the device the way I wanted and reinstall everything, however, afterwards I could no long access this device over USB as an MTP device, or a PTP device, or a USB device. I think this is probably a driver problem, but I don't know what to do to fix it.
I'm using Windows XP SP3, I have Windows Media Player 11.
When I have My Nook set as an MTP device, the system looks like it is installing an MTP drive, but does not complete. The Entry in device manager only describes is as an "MTP Device" but that there is no driver installed, and keeps prompting in the system tray that it is installing an "MTP Device" driver over and over again.
If PTP is selected, is shows as a USB still camera, but I cannot access any thing on it, and in USB mode I just have a USB device in device manager with an "!" on it.
Any suggestion on how I can get the correct drivers reinstalled?
Thank
For me Unfortunately, MTP application has stopped problem is solved !!!
Read my post #6, problem is solved !!! very minor point but we tend to overlook it...
http://forum.xda-developers.com/showthread.php?t=2547187
Do vote me Thanks if your problem is solved...:good:
I have a NT 16 gb from stock with my smartphone usb cable but not the charger.
I connect the usb cable to an international adapter via its usb port so I think I get 1.6A: and judging by how fast I charge the NT, I would say it is right.
I want cm10.2 or cm11 [preferably of course] but I cannot install cwm.
I cannot get usb debugging on by downloading an apk and lunching it: I must choose between the app installer or the package installer and then get the error: only from NB we can install apk's, great.
I have 1micro sdhc class 4 of 4gb and one class4 16gb, none of them permits to boot up which incredibly sucks, idk why.
I configure them with minitool, 300mb space, and my put img of cwm 6.0.4.6.
Every time I end up with the reset factory choice from NB after I perform pwr+home then power alone; whether I connect the nt to the power adapter or not.
When I connect the nt to windows, it is seen only as a drive.
ADB does not recognize the device of course.
Is there a way to install CM ? without a bootable SD ?
This is unbelievably frustrating and since I am a complete noob to android and all that, pls level with me
this guide is quite helpful: http://wiki.cyanogenmod.org/w/Install_CM_for_acclaim
if i were you i'd throw the ROM and Gapps that you want on the internal storage if you can get into USB mode, then look at this and use this guide to flash CM: http://forum.xda-developers.com/showpost.php?p=21895025&postcount=14
yeah it says how to root stock firmware but it's the same process, just different zip files.
yes I have seen the wiki and I am stuck at Boot to recovery mode since my nook always shows the BN recovery:
from your second link, it is this line
You will see a picture of N on the screen followed by a box with a white background followed by CWM booting up.
CWM does not boot. Is it possible that the problem is from the SD cards ?
I tested a sandisk 32gb class10, it still shows the factory reset screen
Regarding the USB mode, the NT says I must install the apks from BN only, so I do not not know how to active it.
i'm assuming you know how to connect the tablet to a computer... try that.
blue whale said:
I have a NT 16 gb from stock with my smartphone usb cable but not the charger.
I connect the usb cable to an international adapter via its usb port so I think I get 1.6A: and judging by how fast I charge the NT, I would say it is right.
...
Is there a way to install CM ? without a bootable SD ?
This is unbelievably frustrating and since I am a complete noob to android and all that, pls level with me
Click to expand...
Click to collapse
Have you tried the method outlined at http://forum.xda-developers.com/showpost.php?p=51377882&postcount=163?
Note that many NT will boot off SD only from power-off state and upon insertion of a powered USB cable (regular mini-USB cable connected to PC or powered USB Hub should work fine).
Success CM11 is installed \0/; My partition was of type 0b not 0c...
I do have a problem now when I plug in the tablet on windows xp sp3: windows cannot find the drivers with or without debugging on.
Is it possible to see the device as a storage space in general and also being recognized by adb when debugging is on {i believe it is how this work, is it not ?} ?
blue whale said:
Success CM11 is installed \0/; My partition was of type 0b not 0c...
I do have a problem now when I plug in the tablet on windows xp sp3: windows cannot find the drivers with or without debugging on.
Is it possible to see the device as a storage space in general and also being recognized by adb when debugging is on {i believe it is how this work, is it not ?} ?
Click to expand...
Click to collapse
By default the NT should automatically show up as an MTP device when plugged in via USB.
You only need to enable USB debugging when using adb access over USB.
digixmax said:
By default the NT should automatically show up as an MTP device when plugged in via USB.
You only need to enable USB debugging when using adb access over USB.
Click to expand...
Click to collapse
Well, via a software, I removed all the usb drivers connected to an android tablet. Then, the first time I plug in the NT, I have an OMAP443 install [for I do have these drivers] and windows then searches for the "BN NT" but cannot find the drivers. It's quite puzzling.
For the MTP, as far as I understand, I must install windows mediaplayer 11, is there not an alternative >?
blue whale said:
Well, via a software, I removed all the usb drivers connected to an android tablet. Then, the first time I plug in the NT, I have an OMAP443 install [for I do have these drivers] and windows then searches for the "BN NT" but cannot find the drivers. It's quite puzzling.
Click to expand...
Click to collapse
Did you switch the NT to USB mode (Settings->Storage->Settings->UMS)?
For the MTP, as far as I understand, I must install windows mediaplayer 11, is there not an alternative >?
Click to expand...
Click to collapse
MTP on Win PC requires Windows Media Player 10 or later.
it did work after disabling the debuging
I cant post in the Dirty Unicorns thread so I am posting here. People said that USB Mass Storage is working flawlessly in dirty unicorns. However, I still can't get it to show up at all. I'm wondering what steps I should take? Right now all I know is when I connect it via usb, on the phone, a USB Mass Storage page opens up for a split second, then closes. I have it enabled in the storage settings. Any help with this?
Have you tried different ports on the PC, different cords, and/or a different PC to make sure it's not something with the rom itself since it is working for others? If there's not a notification when it's plugged in to tell you it's connected, then it's probably one of those 3 things. Does MTP work? Also, open the Device Manager and check the driver status when you plug it in to see if the PC does recognize it and whether or not it is trying to load the correct drivers.
es0tericcha0s said:
Have you tried different ports on the PC, different cords, and/or a different PC to make sure it's not something with the rom itself since it is working for others? If there's not a notification when it's plugged in to tell you it's connected, then it's probably one of those 3 things. Does MTP work? Also, open the Device Manager and check the driver status when you plug it in to see if the PC does recognize it and whether or not it is trying to load the correct drivers.
Click to expand...
Click to collapse
I'm getting the error "This device cannot start. (Code 10)" in device manager. Also, it first shows up as drive L with a yellow triangle, but then it disappears after a little while.
Also, I am able to successfully connect it, get the drivers automatically, and keep the USB Mass storage page open when using a different computer. So it's got to be something with my computer right now. Think you could walk me through what to do with the drivers and whatnot?