This guy I know got a fascinate and he flashed this http://www.theandroidsoul.com/how-to-install-android-2-3-2-on-samsung-galaxy-s-leaked-rom/
I tried odin to ED01 and it failed. Do I need the pit files? How do I fix his phone?
And no this guy is not me >.< I have a Thunderbolt and my gf has my fascinate running community rom v1.3
Any and all help will be appreciated.
This is the odin feedback.
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> Enter CS for MD5..
<ID:0/011> Check MD5.. Do not unplug the cable..
<ID:0/011> Please wait..
<ID:0/011> Checking MD5 finished Sucessfully..
<ID:0/011> Leave CS..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> cache.rfs
<ID:0/011> dbdata.rfs
<ID:0/011> factoryfs.rfs
<ID:0/011> movinand.bin
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try this...
http://forum.xda-developers.com/showthread.php?t=867648
Trying this first http://forum.xda-developers.com/showthread.php?t=1026746, I should probably learn to look better >.< I tried searching but that can sometimes be a futile effort...
Related
I made the mistake of attempting to apply the US region stock ROM to my apparent Europe version (KJ4) galaxy note.
In so doing, it now won't seem to turn on.
However, I can hear it connect and disconnect from the computer if I toggle the power button. I'm assuming it's continuously in the download mode until I get it out? I don't know, since nothing shows up on the screen. Am I screwed? Should I attempt a replacement?
Please help me.. if I posted in the wrong forum, please move the post.
I will give you my first born if you can help me, no strings attached.
<ID:0/012> Added!!
<ID:0/012> Removed!!
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7310XEUKJ4_P7310XXKJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Set PIT file..
<ID:0/012> DO NOT TURN OFF TARGET!!
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> boot.img.md5
<ID:0/012> NAND Write Start!!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've made sure no KIES things were running on my PC.
I've tried different USB ports.
I've unzipped Odin3 again.
Worst part is that I changed my SIM over from my iPhone4 already, so I have no phone.. no ladies now... nothing. I'm turning into a monk.
Tried to flash firm:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> zImage
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.bin
<ID:0/011> modem.bin
...and again.. sits at "modem.bin"
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> zImage
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.bin
<ID:0/011> modem.bin
Assuming you cant get into CWM or anything?
CdTDroiD said:
Assuming you cant get into CWM or anything?
Click to expand...
Click to collapse
That's correct sir.
But I can hear it connecting/reconnecting if I toggle it.
Is this a complete irreversible hard brick?
I don't think so...
I don't think so.... try to flash with heimdall!!!
or
Send to samsung.... a month ago i sent my GT-P1000 (galaxy tab) completely bricked (it doesn't power on!!!!!) in 2 weeks they have sent me a new one!!
Just Try !!!!
Cheers Cascio97
Mushinronjya said:
I made the mistake of attempting to apply the US region stock ROM to my apparent Europe version (KJ4) galaxy note.
In so doing, it now won't seem to turn on.
However, I can hear it connect and disconnect from the computer if I toggle the power button. I'm assuming it's continuously in the download mode until I get it out? I don't know, since nothing shows up on the screen. Am I screwed? Should I attempt a replacement?
Please help me.. if I posted in the wrong forum, please move the post.
I will give you my first born if you can help me, no strings attached.
<ID:0/012> Added!!
<ID:0/012> Removed!!
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7310XEUKJ4_P7310XXKJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Set PIT file..
<ID:0/012> DO NOT TURN OFF TARGET!!
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> boot.img.md5
<ID:0/012> NAND Write Start!!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've made sure no KIES things were running on my PC.
I've tried different USB ports.
I've unzipped Odin3 again.
Worst part is that I changed my SIM over from my iPhone4 already, so I have no phone.. no ladies now... nothing. I'm turning into a monk.
Tried to flash firm:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> zImage
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.bin
<ID:0/011> modem.bin
...and again.. sits at "modem.bin"
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> zImage
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.bin
<ID:0/011> modem.bin
Click to expand...
Click to collapse
hard bricked, you have to use riffbox
i did a wipe data/factory reset and wipe data then went in donwloading mode
when i try fo flash stock 403 in odin i get this message
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XXLPS_I9100OXALPS_I9100XXLPS_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003>
<ID:0/003> Receive Response from boot-loader
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
RefiRed said:
i did a wipe data/factory reset and wipe data then went in donwloading mode
when i try fo flash stock 403 in odin u get this message
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XXLPS_I9100OXALPS_I9100XXLPS_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003>
<ID:0/003> Receive Response from boot-loader
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Did you by any chance remove your phone from PC when downloading?
Is your phone still booting after it failed to flash the rom?
when i boot the phone:
http://i.discuss.com.hk/d/attachments/day_120320/20120320_17f23996a1bdd404a042Yc9PQx2uKxDa.jpg
i did a wipe data/factory reset and wipe data and the phone booted and after i put the gmail account it got stuck...i had to remove the battery and then tried to reflash
i think i got it a friend suggested to use pda csc and phone the second time worked
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100_CODE_I9100XXLPJ_CL140368_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXLPJ_REV_02_CL1105553.tar.md5 is valid.
<OSM> GT-I9100-MULTI-CSC-OXALPJ.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> boot.bin
<ID:0/010> NAND Write Start!!
<ID:0/010> Sbl.bin
<ID:0/010> param.lfs
<ID:0/010> zImage
<ID:0/010> factoryfs.img
<ID:0/010> data.img
<ID:0/010> cache.img
<ID:0/010> hidden.img
<ID:0/010> modem.bin
<ID:0/010> Transmission Complete..
<ID:0/010> Now Writing.. Please wait about 2 minutes
<ID:0/010> Receive Response from boot-loader
<ID:0/010> cache.img
<ID:0/010> RQT_CLOSE !!
<ID:0/010> RES OK !!
<ID:0/010> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/010> Removed!!
idk what is wrong...
but when i flash a single file like I9100XWLP7_I9100OXXLPH_I9100XXLPS_HOME.tar.md5 i get the above error...
i need those 3 files
MODEM_I9100XXLPJ_REV_02_CL1105553.tar.md5
I9100_CODE_I9100XXLPJ_CL140368_REV02_user_low_ship.tar.md5
GT-I9100-MULTI-CSC-OXALPJ.tar.md5
i'm trying to get to the stock firmware that the phone came
the screenshot was mande when i decided to try custom firmwares
hi
I probably tried loading i9100 rom into my i9100G phone and now its stuck.
I got BSOD (Black Screen Of Death) - see attached jpg.
when i connected the phone back to the pc the odin app recognized it (i guess it remained in download mode).
I loaded the following file GT-I9100G_ICS_ClockworkMod-Recovery_6.0.1.2.tar and by that i coud enter download mode and recovery mode.
I tried to load ROM stock and failed time and again, each time got the same message:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLPQ_I9100GODDLP7_I9100GDDLP5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.img
<ID:0/007> NAND Write Start!!
<ID:0/007> factoryfs.img
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
CAN SOMEONE PLEASE HELP ME TO REVIVE MY PHONE?
Thanks.
itsik888 said:
hi
I probably tried loading i9100 rom into my i9100G phone and now its stuck.
I got BSOD (Black Screen Of Death) - see attached jpg.
when i connected the phone back to the pc the odin app recognized it (i guess it remained in download mode).
I loaded the following file GT-I9100G_ICS_ClockworkMod-Recovery_6.0.1.2.tar and by that i coud enter download mode and recovery mode.
I tried to load ROM stock and failed time and again, each time got the same message:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLPQ_I9100GODDLP7_I9100GDDLP5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.img
<ID:0/007> NAND Write Start!!
<ID:0/007> factoryfs.img
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
CAN SOMEONE PLEASE HELP ME TO REVIVE MY PHONE?
Thanks.
Click to expand...
Click to collapse
hi, did you resolve your problem with your phone? i have the same problem, but with a Galaxy Note. if you done it, can you give me a hand? thanks
adyolcian said:
hi, did you resolve your problem with your phone? i have the same problem, but with a Galaxy Note. if you done it, can you give me a hand? thanks
Click to expand...
Click to collapse
Go to Galaxy Note forum.
Sent from my GT-I9100
boki9999 said:
Go to Galaxy Note forum.
Sent from my GT-I9100
Click to expand...
Click to collapse
And the other guy can go to the Gt-I9100GGGGGGGGGG forum.
I had the same problem and I've flashed a stock ICS rom via odin. And do a factory reset/ cache wipe. After that *2767*3855#. It's a hard reset and you'll lose everything but you can use your phone again
Edi got the same problem. Already tried flash stock 4.0.1 rom. FAILED.
<OSM> Leave CS..
<ID:0/028> Odin v.3 engine (ID:28)..
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Get PIT for mapping..
<ID:0/028> Firmware update start..
<ID:0/028> boot.bin
<ID:0/028> NAND Write Start!!
<ID:0/028>
<ID:0/028> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What should i do now ?
shinseijuro said:
Edi got the same problem. Already tried flash stock 4.0.1 rom. FAILED.
<OSM> Leave CS..
<ID:0/028> Odin v.3 engine (ID:28)..
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Get PIT for mapping..
<ID:0/028> Firmware update start..
<ID:0/028> boot.bin
<ID:0/028> NAND Write Start!!
<ID:0/028>
<ID:0/028> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What should i do now ?
Click to expand...
Click to collapse
try to change the port USB, or try it on another PC if you can
if anyone know, is there any way to change the firmware beside ODIN? thanks
shinseijuro said:
Edi got the same problem. Already tried flash stock 4.0.1 rom. FAILED.
<OSM> Leave CS..
<ID:0/028> Odin v.3 engine (ID:28)..
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Get PIT for mapping..
<ID:0/028> Firmware update start..
<ID:0/028> boot.bin
<ID:0/028> NAND Write Start!!
<ID:0/028>
<ID:0/028> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What should i do now ?
Click to expand...
Click to collapse
This actually happens quite often for me. Just try again and again. You'll get there eventually. Try and do the process as quick possible. That helped me.
Not working. Now my friend cant use his phone and its not even rooted yet! All he wants just a standard pc kies update and kies give him the computer screen.
Now using:
Sony Xperia tipo ST21i
stock 4.0.4
11.0.A.4.22
(rooted, locked bootloader)
Current problem:
Cant get past installing flash drivers in xp.
Im flash on odin this firmware:
I9100XXMS1_I9100OXAMS1_XEO
im have a log from odin.... :
<ID:0/003> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XXMS1_I9100OXAMS1_I9100XXLS8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Sbl.bin
<ID:0/005> param.lfs
<ID:0/005> factoryfs.img
<ID:0/005> __Xmit Write fail
<ID:0/005> XmitData Fail..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is now, download mode show me in my pc "Usb device problem...." and, im my phone turn on have message:
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again.
Whats next? im have this phone 1 DAY !!!! :crying:
Hopper8's 'Odin troubleshooting' thread stickied in the General section, find it, try as much of the stuff in the thread as you need to in order to get a successful Odin flash.
Hi,
I am trying to flash firmware BOG2 over BOC1 and I am consistently getting flash fail with the below error message.
I have changed the USB cable/port as well nothing works?Any help
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> R750XXU2BOG2_R750OXA2BOG2_R750XXU2BOG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> dzImage
<ID:0/007> NAND Write Start!!
<ID:0/007> dzImage-recovery
<ID:0/007> sbl1.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
rocky272727 said:
Hi,
I am trying to flash firmware BOG2 over BOC1 and I am consistently getting flash fail with the below error message.
I have changed the USB cable/port as well nothing works?Any help
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> R750XXU2BOG2_R750OXA2BOG2_R750XXU2BOG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> dzImage
<ID:0/007> NAND Write Start!!
<ID:0/007> dzImage-recovery
<ID:0/007> sbl1.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
Click to expand...
Click to collapse
I got pretty much the same error. As like you I have BOC and tried to flash BOG2.
Seems that bootloader is not recognized as compatible, no matter in fact it is. Seems modem is maybe different.
If anyone has any clue on how to workaround this issue, plz, let us know.
bump
Solved
andrew.mackew said:
I got pretty much the same error. As like you I have BOC and tried to flash BOG2.
Seems that bootloader is not recognized as compatible, no matter in fact it is. Seems modem is maybe different.
If anyone has any clue on how to workaround this issue, plz, let us know.
Click to expand...
Click to collapse
Hi,
I figured it out. BOG2 is a 2.2.1.4 and BOC1 is 2.2.1.5 (R750WVLU1BOC1), so downgrade not possible for bootloader.
rocky272727 said:
Hi,
I figured it out. BOG2 is a 2.2.1.4 and BOC1 is 2.2.1.5 (R750WVLU1BOC1), so downgrade not possible for bootloader.
Click to expand...
Click to collapse
Thanks for let me know that. Appreciate. :good:
same
well i got the same error , was trying to install cm on the watch then got stuck on samsung screen tried flashing the tizen firmware 4 files but everytime i end up with that thing do u know how to fix it ?!