Odin Flash Fail - Firmware Update - Samsung Gear S

Hi,
I am trying to flash firmware BOG2 over BOC1 and I am consistently getting flash fail with the below error message.
I have changed the USB cable/port as well nothing works?Any help
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> R750XXU2BOG2_R750OXA2BOG2_R750XXU2BOG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> dzImage
<ID:0/007> NAND Write Start!!
<ID:0/007> dzImage-recovery
<ID:0/007> sbl1.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!

rocky272727 said:
Hi,
I am trying to flash firmware BOG2 over BOC1 and I am consistently getting flash fail with the below error message.
I have changed the USB cable/port as well nothing works?Any help
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> R750XXU2BOG2_R750OXA2BOG2_R750XXU2BOG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> dzImage
<ID:0/007> NAND Write Start!!
<ID:0/007> dzImage-recovery
<ID:0/007> sbl1.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
Click to expand...
Click to collapse
I got pretty much the same error. As like you I have BOC and tried to flash BOG2.
Seems that bootloader is not recognized as compatible, no matter in fact it is. Seems modem is maybe different.
If anyone has any clue on how to workaround this issue, plz, let us know.

bump

Solved
andrew.mackew said:
I got pretty much the same error. As like you I have BOC and tried to flash BOG2.
Seems that bootloader is not recognized as compatible, no matter in fact it is. Seems modem is maybe different.
If anyone has any clue on how to workaround this issue, plz, let us know.
Click to expand...
Click to collapse
Hi,
I figured it out. BOG2 is a 2.2.1.4 and BOC1 is 2.2.1.5 (R750WVLU1BOC1), so downgrade not possible for bootloader.

rocky272727 said:
Hi,
I figured it out. BOG2 is a 2.2.1.4 and BOC1 is 2.2.1.5 (R750WVLU1BOC1), so downgrade not possible for bootloader.
Click to expand...
Click to collapse
Thanks for let me know that. Appreciate. :good:

same

well i got the same error , was trying to install cm on the watch then got stuck on samsung screen tried flashing the tizen firmware 4 files but everytime i end up with that thing do u know how to fix it ?!

Related

HELP. stuck in download mode!

Hello, im new to the whole andriod scene..i have a galaxy s4 sch-i545. just switched over from apple...last night i did the new update, then i realized you cant root that firmware.so i used odin and tried to downgrade to I545VRUDMI1...my device is sch-i545...when i clicked start in odin to downgrade, it ran, but Tthe end failed. BUT now wen i try to turn my phone back on its in odin mode and says FIRMWARE UPGRADE ENCOUNTERD AN ISSUE. PLEASE SELECT RECOVRY MODE IN KIES AND TRY AGAIN. wont even go in recovry mode, but when i hit the volume down+home+power button i get back to the screen asking if i wana go into download mode, i hit the vol up boton and im back at the downloading... do not turn of target screen...please help i only had this phone for 2 days lol. the odin program reads the phone but always fail. ive tried a few stock firmwares, still nothing!!! help please! heres the error i always get in odin.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I545VRUAME7_I545VZWAME7_690088_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
travismorgan said:
Hello, im new to the whole andriod scene. just switched over from apple...last night i did the new update, then i realized you cant root that firmware.so i used odin and tried to downgrade to I545VRUDMI1...my device is sch-i545...when i clicked start in odin to downgrade, it ran, but Tthe end failed. BUT now wen i try to turn my phone back on its in odin mode and says FIRMWARE UPGRADE ENCOUNTERD AN ISSUE. PLEASE SELECT RECOVRY MODE IN KIES AND TRY AGAIN. wont even go in recovry mode, but when i hit the volume down+home+power button i get back to the screen asking if i wana go into download mode, i hit the vol up boton and im back at the downloading... do not turn of target screen...please help i only had this phone for 2 days lol. the odin program reads the phone but always fail. ive tried a few stock firmwares, still nothing!!! help please! heres the error i always get in odin.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I545VRUAME7_I545VZWAME7_690088_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I suggest you go to this link (http://forum.xda-developers.com/showthread.php?t=2504408) and follow the instructions within the various other threads exactly as they indicate. You cannot screw this up if you follow it correctly. I screwed up my phone, followed these instructions, and am now in a stable 4.3 rooted state.
Also, make sure to use at least Odin 3.07.
Good luck and report back! And be patient!
If you took the update to MJ7, you can't go back.
Sent from my NCC 1701 using Tapatalk 4
riker147 said:
If you took the update to MJ7, you can't go back.
Sent from my NCC 1701 using Tapatalk 4
Click to expand...
Click to collapse
i did the update last night, then i tried to downgrade now itsstuck at that screen still...so theres no way to fix it?
Take a look here.
http://forum.xda-developers.com/showthread.php?t=2505690
Centinno said:
I suggest you go to this link (http://forum.xda-developers.com/showthread.php?t=2504408) and follow the instructions within the various other threads exactly as they indicate. You cannot screw this up if you follow it correctly. I screwed up my phone, followed these instructions, and am now in a stable 4.3 rooted state.
Also, make sure to use at least Odin 3.07.
Good luck and report back! And be patient!
Click to expand...
Click to collapse
yea i tried that,
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUDMI1_I545VZWDMI1_I545VRUDMI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
...i used odin version 3.7 and 3.9..no luck ..i see a .dll file in the folder am i supposed to load that on odin somewhee?r
Try this. http://forum.xda-developers.com/showthread.php?t=2504969
Sent from my SCH-I545 using XDA Premium 4 mobile app
-Lawless said:
Take a look here.
http://forum.xda-developers.com/showthread.php?t=2505690
Click to expand...
Click to collapse
life saver bro..i flashed that file and it worked! phones back and running thanks.

[q] help phone wont boot im stuck on a yellow triangle

i have a galaxy s 4 verizon i have mdk and i have tried unrooting it because my friend tried rooting it while i was gone and messed up the process but im using odin3.07 and im getting this. "Firmware upgrade encountered an issue. Please select recover mode in Kies & try again."
<ID:0/007> Removed!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
my phone says start [224,1440]
sw rev. check fail : fused 5, binary 1
and ive tried 2 other stock files and i still get the same thing i even tried a Me7 to please help
When you tried the me7 tat what happened
Sent from my Verizon Samsung Galaxy S4 with HD12 on Stock Side
Retired Phones / Devices
- Eris
- Droid 2
- Droid X
- Fascinate
- HP Touchpad
- Thunderbolt
- Droid Raxr
here are both mdk and me7 failures
jwoods82 said:
When you tried the me7 tat what happened
Sent from my Verizon Samsung Galaxy S4 with HD12 on Stock Side
Retired Phones / Devices
- Eris
- Droid 2
- Droid X
- Fascinate
- HP Touchpad
- Thunderbolt
- Droid Raxr
Click to expand...
Click to collapse
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I545VRUAME7_I545VZWAME7_690088_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> VRUAMDK_NoWipe.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NON-HLOS.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> aboot.mbn
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Im using Odin v1.85
A1C_Malone said:
i have a galaxy s 4 verizon i have mdk and i have tried unrooting it because my friend tried rooting it while i was gone and messed up the process but im using odin3.07 and im getting this. "Firmware upgrade encountered an issue. Please select recover mode in Kies & try again."
<ID:0/007> Removed!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
my phone says start [224,1440]
sw rev. check fail : fused 5, binary 1
and ive tried 2 other stock files and i still get the same thing i even tried a Me7 to please help
Click to expand...
Click to collapse
"Fused:5" indicates that you're running a MJ7 bootloader.
If you can boot, check the bootloader revision. Otherwise, flash MJ7. Then de-friend that friend if you actually did start with MDK.
I had the same problem ...
i take an other usb cable (samsung of course) and try on another port on my pc

Odin Fail

Every time I try to flash using Odin, it fails. Here's the log:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXS3DPB2_G925FOXE3DPAD_G925FXXS3DPB3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have a galaxy s6 edge, officially, the G925T version. But when I got a different custom ROM, the number changed to G925F. I've tried flashing the stock firmware for both those versions, and neither work. I have TWRP installed, so I wipe the system every time I try something new.
I've also tried it on multiple computers, on multiple USB ports, with multiple USB cables. And with different versions of Odin. Do you know what I'm doing wrong?

Please Help!! Samsung Galaxy grand prime SM-G530H system.img.ext4 fail(erase)

My Samsung Galaxy Grand Prime SM-G530H stuck in boot loop. So, I tried to install the new firmware by odin but i got this error massage
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G530HVJU1ANJ2_G530HZTM1ANJ2_G530HXXU1ANJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then, I downloaded new firmware and i got the new error
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G530HXXS2BPG1_G530HOLB2BPE3_G530HXXU2BPB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> hyp.mbn
<ID:0/007> NON-HLOS.bin
<ID:0/007> sec.dat
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> FAIL! (Erase)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Sorry for my bad english

Problem with Odin. NAND write start. Fail.

Hi Everyone, I got two Samsung SM-G920F and I googled my way here to update the FW to 6.0.1 on them to solve some problems they have.
I could upgrade the first one without any problems (and this solved the issues I had) using Odin and a firmware I got from sammobile, now the second one is failing after it starts the NAND write:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1101)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I've tried different FWs, the one that worked on the other SM-G920F was from United Arab Emirates, I've tried that one and one from Italy with the same results. The current installed version is G920FXXU2COH2.
Any help is really appreciated.
Thanks!!!

Categories

Resources