[q] help phone wont boot im stuck on a yellow triangle - Verizon Samsung Galaxy S 4
i have a galaxy s 4 verizon i have mdk and i have tried unrooting it because my friend tried rooting it while i was gone and messed up the process but im using odin3.07 and im getting this. "Firmware upgrade encountered an issue. Please select recover mode in Kies & try again."
<ID:0/007> Removed!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
my phone says start [224,1440]
sw rev. check fail : fused 5, binary 1
and ive tried 2 other stock files and i still get the same thing i even tried a Me7 to please help
When you tried the me7 tat what happened
Sent from my Verizon Samsung Galaxy S4 with HD12 on Stock Side
Retired Phones / Devices
- Eris
- Droid 2
- Droid X
- Fascinate
- HP Touchpad
- Thunderbolt
- Droid Raxr
here are both mdk and me7 failures
jwoods82 said:
When you tried the me7 tat what happened
Sent from my Verizon Samsung Galaxy S4 with HD12 on Stock Side
Retired Phones / Devices
- Eris
- Droid 2
- Droid X
- Fascinate
- HP Touchpad
- Thunderbolt
- Droid Raxr
Click to expand...
Click to collapse
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I545VRUAME7_I545VZWAME7_690088_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> VRUAMDK_NoWipe.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NON-HLOS.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> aboot.mbn
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Im using Odin v1.85
A1C_Malone said:
i have a galaxy s 4 verizon i have mdk and i have tried unrooting it because my friend tried rooting it while i was gone and messed up the process but im using odin3.07 and im getting this. "Firmware upgrade encountered an issue. Please select recover mode in Kies & try again."
<ID:0/007> Removed!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
my phone says start [224,1440]
sw rev. check fail : fused 5, binary 1
and ive tried 2 other stock files and i still get the same thing i even tried a Me7 to please help
Click to expand...
Click to collapse
"Fused:5" indicates that you're running a MJ7 bootloader.
If you can boot, check the bootloader revision. Otherwise, flash MJ7. Then de-friend that friend if you actually did start with MDK.
I had the same problem ...
i take an other usb cable (samsung of course) and try on another port on my pc
Related
Bricked galaxy s2
I tried reverting from Cyanogenmod to official firmware. Whilst flashing my dog jumped on my I9105P and disconnected my phone. Now when i connect it to a charger or USB port it says "Firmware upgrade encountered an issue. Please select recovery mode in kies and try again". Tried flashing with Odin but i get this: <ID:0/007> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> I9105PXXUBNG1_I9105PVVTBNG1_I9105PXXUBNG2_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/007> Odin v.3 engine (ID:7).. <ID:0/007> File analysis.. <ID:0/007> SetupConnection.. <ID:0/007> Initialzation.. <ID:0/007> Get PIT for mapping.. <ID:0/007> Firmware update start.. <ID:0/007> sboot.bin <ID:0/007> NAND Write Start!! <ID:0/007> <ID:0/007> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1) I also can't go to download mode. It says "Low battery, can't download". I left it to charge all night. Help?
Odin Flash Fail - Firmware Update
Hi, I am trying to flash firmware BOG2 over BOC1 and I am consistently getting flash fail with the below error message. I have changed the USB cable/port as well nothing works?Any help <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> R750XXU2BOG2_R750OXA2BOG2_R750XXU2BOG2_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/007> Odin v.3 engine (ID:7).. <ID:0/007> File analysis.. <ID:0/007> SetupConnection.. <ID:0/007> Initialzation.. <ID:0/007> Get PIT for mapping.. <ID:0/007> Firmware update start.. <ID:0/007> SingleDownload. <ID:0/007> dzImage <ID:0/007> NAND Write Start!! <ID:0/007> dzImage-recovery <ID:0/007> sbl1.mbn <ID:0/007> FAIL! (Auth) <ID:0/007> <ID:0/007> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1) <ID:0/007> Removed!! <ID:0/007> Added!! <ID:0/007> Removed!!
rocky272727 said: Hi, I am trying to flash firmware BOG2 over BOC1 and I am consistently getting flash fail with the below error message. I have changed the USB cable/port as well nothing works?Any help <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> R750XXU2BOG2_R750OXA2BOG2_R750XXU2BOG2_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/007> Odin v.3 engine (ID:7).. <ID:0/007> File analysis.. <ID:0/007> SetupConnection.. <ID:0/007> Initialzation.. <ID:0/007> Get PIT for mapping.. <ID:0/007> Firmware update start.. <ID:0/007> SingleDownload. <ID:0/007> dzImage <ID:0/007> NAND Write Start!! <ID:0/007> dzImage-recovery <ID:0/007> sbl1.mbn <ID:0/007> FAIL! (Auth) <ID:0/007> <ID:0/007> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1) <ID:0/007> Removed!! <ID:0/007> Added!! <ID:0/007> Removed!! Click to expand... Click to collapse I got pretty much the same error. As like you I have BOC and tried to flash BOG2. Seems that bootloader is not recognized as compatible, no matter in fact it is. Seems modem is maybe different. If anyone has any clue on how to workaround this issue, plz, let us know.
bump
Solved andrew.mackew said: I got pretty much the same error. As like you I have BOC and tried to flash BOG2. Seems that bootloader is not recognized as compatible, no matter in fact it is. Seems modem is maybe different. If anyone has any clue on how to workaround this issue, plz, let us know. Click to expand... Click to collapse Hi, I figured it out. BOG2 is a 2.2.1.4 and BOC1 is 2.2.1.5 (R750WVLU1BOC1), so downgrade not possible for bootloader.
rocky272727 said: Hi, I figured it out. BOG2 is a 2.2.1.4 and BOC1 is 2.2.1.5 (R750WVLU1BOC1), so downgrade not possible for bootloader. Click to expand... Click to collapse Thanks for let me know that. Appreciate. :good:
same
well i got the same error , was trying to install cm on the watch then got stuck on samsung screen tried flashing the tizen firmware 4 files but everytime i end up with that thing do u know how to fix it ?!
Odin Fail
Every time I try to flash using Odin, it fails. Here's the log: <ID:0/007> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> G925FXXS3DPB2_G925FOXE3DPAD_G925FXXS3DPB3_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/007> Odin engine v(ID:3.1005).. <ID:0/007> File analysis.. <ID:0/007> SetupConnection.. <ID:0/007> Initialzation.. <ID:0/007> Get PIT for mapping.. <ID:0/007> Firmware update start.. <ID:0/007> SingleDownload. <ID:0/007> sboot.bin <ID:0/007> NAND Write Start!! <ID:0/007> FAIL! <ID:0/007> <ID:0/007> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1) I have a galaxy s6 edge, officially, the G925T version. But when I got a different custom ROM, the number changed to G925F. I've tried flashing the stock firmware for both those versions, and neither work. I have TWRP installed, so I wipe the system every time I try something new. I've also tried it on multiple computers, on multiple USB ports, with multiple USB cables. And with different versions of Odin. Do you know what I'm doing wrong?
Please Help!! Samsung Galaxy grand prime SM-G530H system.img.ext4 fail(erase)
My Samsung Galaxy Grand Prime SM-G530H stuck in boot loop. So, I tried to install the new firmware by odin but i got this error massage <ID:0/007> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> G530HVJU1ANJ2_G530HZTM1ANJ2_G530HXXU1ANJ2_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/007> Odin engine v(ID:3.1005).. <ID:0/007> File analysis.. <ID:0/007> SetupConnection.. <ID:0/007> Initialzation.. <ID:0/007> Get PIT for mapping.. <ID:0/007> Firmware update start.. <ID:0/007> SingleDownload. <ID:0/007> aboot.mbn <ID:0/007> NAND Write Start!! <ID:0/007> FAIL! (Auth) <ID:0/007> <ID:0/007> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1) Then, I downloaded new firmware and i got the new error <ID:0/007> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> G530HXXS2BPG1_G530HOLB2BPE3_G530HXXU2BPB2_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/007> Odin engine v(ID:3.1005).. <ID:0/007> File analysis.. <ID:0/007> SetupConnection.. <ID:0/007> Initialzation.. <ID:0/007> Get PIT for mapping.. <ID:0/007> Firmware update start.. <ID:0/007> SingleDownload. <ID:0/007> aboot.mbn <ID:0/007> NAND Write Start!! <ID:0/007> sbl1.mbn <ID:0/007> rpm.mbn <ID:0/007> tz.mbn <ID:0/007> hyp.mbn <ID:0/007> NON-HLOS.bin <ID:0/007> sec.dat <ID:0/007> boot.img <ID:0/007> recovery.img <ID:0/007> system.img.ext4 <ID:0/007> FAIL! (Erase) <ID:0/007> <ID:0/007> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1) Sorry for my bad english
Problems with GT-N8010
<OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> N8010XXUDNE4_N8010PHNDNF1_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/007> Added!! <ID:0/007> Odin v.3 engine (ID:7).. <ID:0/007> File analysis.. <ID:0/007> SetupConnection.. <ID:0/007> Initialzation.. <ID:0/007> Get PIT for mapping.. <ID:0/007> Firmware update start.. <ID:0/007> sboot.bin <ID:0/007> NAND Write Start!! <ID:0/007> FAIL! <OSM> All threads completed. (succeed 0 / failed 1) i think my tablet is on N8000 bootloader but i can not found a other bootloader and this error i have can anyone help me out