Hello, im new to the whole andriod scene..i have a galaxy s4 sch-i545. just switched over from apple...last night i did the new update, then i realized you cant root that firmware.so i used odin and tried to downgrade to I545VRUDMI1...my device is sch-i545...when i clicked start in odin to downgrade, it ran, but Tthe end failed. BUT now wen i try to turn my phone back on its in odin mode and says FIRMWARE UPGRADE ENCOUNTERD AN ISSUE. PLEASE SELECT RECOVRY MODE IN KIES AND TRY AGAIN. wont even go in recovry mode, but when i hit the volume down+home+power button i get back to the screen asking if i wana go into download mode, i hit the vol up boton and im back at the downloading... do not turn of target screen...please help i only had this phone for 2 days lol. the odin program reads the phone but always fail. ive tried a few stock firmwares, still nothing!!! help please! heres the error i always get in odin.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I545VRUAME7_I545VZWAME7_690088_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
travismorgan said:
Hello, im new to the whole andriod scene. just switched over from apple...last night i did the new update, then i realized you cant root that firmware.so i used odin and tried to downgrade to I545VRUDMI1...my device is sch-i545...when i clicked start in odin to downgrade, it ran, but Tthe end failed. BUT now wen i try to turn my phone back on its in odin mode and says FIRMWARE UPGRADE ENCOUNTERD AN ISSUE. PLEASE SELECT RECOVRY MODE IN KIES AND TRY AGAIN. wont even go in recovry mode, but when i hit the volume down+home+power button i get back to the screen asking if i wana go into download mode, i hit the vol up boton and im back at the downloading... do not turn of target screen...please help i only had this phone for 2 days lol. the odin program reads the phone but always fail. ive tried a few stock firmwares, still nothing!!! help please! heres the error i always get in odin.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I545VRUAME7_I545VZWAME7_690088_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I suggest you go to this link (http://forum.xda-developers.com/showthread.php?t=2504408) and follow the instructions within the various other threads exactly as they indicate. You cannot screw this up if you follow it correctly. I screwed up my phone, followed these instructions, and am now in a stable 4.3 rooted state.
Also, make sure to use at least Odin 3.07.
Good luck and report back! And be patient!
If you took the update to MJ7, you can't go back.
Sent from my NCC 1701 using Tapatalk 4
riker147 said:
If you took the update to MJ7, you can't go back.
Sent from my NCC 1701 using Tapatalk 4
Click to expand...
Click to collapse
i did the update last night, then i tried to downgrade now itsstuck at that screen still...so theres no way to fix it?
Take a look here.
http://forum.xda-developers.com/showthread.php?t=2505690
Centinno said:
I suggest you go to this link (http://forum.xda-developers.com/showthread.php?t=2504408) and follow the instructions within the various other threads exactly as they indicate. You cannot screw this up if you follow it correctly. I screwed up my phone, followed these instructions, and am now in a stable 4.3 rooted state.
Also, make sure to use at least Odin 3.07.
Good luck and report back! And be patient!
Click to expand...
Click to collapse
yea i tried that,
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUDMI1_I545VZWDMI1_I545VRUDMI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
...i used odin version 3.7 and 3.9..no luck ..i see a .dll file in the folder am i supposed to load that on odin somewhee?r
Try this. http://forum.xda-developers.com/showthread.php?t=2504969
Sent from my SCH-I545 using XDA Premium 4 mobile app
-Lawless said:
Take a look here.
http://forum.xda-developers.com/showthread.php?t=2505690
Click to expand...
Click to collapse
life saver bro..i flashed that file and it worked! phones back and running thanks.
Related
hi
I probably tried loading i9100 rom into my i9100G phone and now its stuck.
I got BSOD (Black Screen Of Death) - see attached jpg.
when i connected the phone back to the pc the odin app recognized it (i guess it remained in download mode).
I loaded the following file GT-I9100G_ICS_ClockworkMod-Recovery_6.0.1.2.tar and by that i coud enter download mode and recovery mode.
I tried to load ROM stock and failed time and again, each time got the same message:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLPQ_I9100GODDLP7_I9100GDDLP5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.img
<ID:0/007> NAND Write Start!!
<ID:0/007> factoryfs.img
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
CAN SOMEONE PLEASE HELP ME TO REVIVE MY PHONE?
Thanks.
itsik888 said:
hi
I probably tried loading i9100 rom into my i9100G phone and now its stuck.
I got BSOD (Black Screen Of Death) - see attached jpg.
when i connected the phone back to the pc the odin app recognized it (i guess it remained in download mode).
I loaded the following file GT-I9100G_ICS_ClockworkMod-Recovery_6.0.1.2.tar and by that i coud enter download mode and recovery mode.
I tried to load ROM stock and failed time and again, each time got the same message:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLPQ_I9100GODDLP7_I9100GDDLP5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.img
<ID:0/007> NAND Write Start!!
<ID:0/007> factoryfs.img
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
CAN SOMEONE PLEASE HELP ME TO REVIVE MY PHONE?
Thanks.
Click to expand...
Click to collapse
hi, did you resolve your problem with your phone? i have the same problem, but with a Galaxy Note. if you done it, can you give me a hand? thanks
adyolcian said:
hi, did you resolve your problem with your phone? i have the same problem, but with a Galaxy Note. if you done it, can you give me a hand? thanks
Click to expand...
Click to collapse
Go to Galaxy Note forum.
Sent from my GT-I9100
boki9999 said:
Go to Galaxy Note forum.
Sent from my GT-I9100
Click to expand...
Click to collapse
And the other guy can go to the Gt-I9100GGGGGGGGGG forum.
I had the same problem and I've flashed a stock ICS rom via odin. And do a factory reset/ cache wipe. After that *2767*3855#. It's a hard reset and you'll lose everything but you can use your phone again
Edi got the same problem. Already tried flash stock 4.0.1 rom. FAILED.
<OSM> Leave CS..
<ID:0/028> Odin v.3 engine (ID:28)..
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Get PIT for mapping..
<ID:0/028> Firmware update start..
<ID:0/028> boot.bin
<ID:0/028> NAND Write Start!!
<ID:0/028>
<ID:0/028> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What should i do now ?
shinseijuro said:
Edi got the same problem. Already tried flash stock 4.0.1 rom. FAILED.
<OSM> Leave CS..
<ID:0/028> Odin v.3 engine (ID:28)..
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Get PIT for mapping..
<ID:0/028> Firmware update start..
<ID:0/028> boot.bin
<ID:0/028> NAND Write Start!!
<ID:0/028>
<ID:0/028> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What should i do now ?
Click to expand...
Click to collapse
try to change the port USB, or try it on another PC if you can
if anyone know, is there any way to change the firmware beside ODIN? thanks
shinseijuro said:
Edi got the same problem. Already tried flash stock 4.0.1 rom. FAILED.
<OSM> Leave CS..
<ID:0/028> Odin v.3 engine (ID:28)..
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Get PIT for mapping..
<ID:0/028> Firmware update start..
<ID:0/028> boot.bin
<ID:0/028> NAND Write Start!!
<ID:0/028>
<ID:0/028> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What should i do now ?
Click to expand...
Click to collapse
This actually happens quite often for me. Just try again and again. You'll get there eventually. Try and do the process as quick possible. That helped me.
Not working. Now my friend cant use his phone and its not even rooted yet! All he wants just a standard pc kies update and kies give him the computer screen.
Now using:
Sony Xperia tipo ST21i
stock 4.0.4
11.0.A.4.22
(rooted, locked bootloader)
Current problem:
Cant get past installing flash drivers in xp.
i have a galaxy s 4 verizon i have mdk and i have tried unrooting it because my friend tried rooting it while i was gone and messed up the process but im using odin3.07 and im getting this. "Firmware upgrade encountered an issue. Please select recover mode in Kies & try again."
<ID:0/007> Removed!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
my phone says start [224,1440]
sw rev. check fail : fused 5, binary 1
and ive tried 2 other stock files and i still get the same thing i even tried a Me7 to please help
When you tried the me7 tat what happened
Sent from my Verizon Samsung Galaxy S4 with HD12 on Stock Side
Retired Phones / Devices
- Eris
- Droid 2
- Droid X
- Fascinate
- HP Touchpad
- Thunderbolt
- Droid Raxr
here are both mdk and me7 failures
jwoods82 said:
When you tried the me7 tat what happened
Sent from my Verizon Samsung Galaxy S4 with HD12 on Stock Side
Retired Phones / Devices
- Eris
- Droid 2
- Droid X
- Fascinate
- HP Touchpad
- Thunderbolt
- Droid Raxr
Click to expand...
Click to collapse
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I545VRUAME7_I545VZWAME7_690088_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> VRUAMDK_NoWipe.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NON-HLOS.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> aboot.mbn
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Im using Odin v1.85
A1C_Malone said:
i have a galaxy s 4 verizon i have mdk and i have tried unrooting it because my friend tried rooting it while i was gone and messed up the process but im using odin3.07 and im getting this. "Firmware upgrade encountered an issue. Please select recover mode in Kies & try again."
<ID:0/007> Removed!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
my phone says start [224,1440]
sw rev. check fail : fused 5, binary 1
and ive tried 2 other stock files and i still get the same thing i even tried a Me7 to please help
Click to expand...
Click to collapse
"Fused:5" indicates that you're running a MJ7 bootloader.
If you can boot, check the bootloader revision. Otherwise, flash MJ7. Then de-friend that friend if you actually did start with MDK.
I had the same problem ...
i take an other usb cable (samsung of course) and try on another port on my pc
Hi, I'm trying to restore my phone to stock using ODIN.
I have Odin 3.09 and have the latest Scamsung Kies installed (for the usb driver).
The file I am flashing is: http://www.androidfilehost.com/?fid=23203820527944861
The message log I get from Odin is:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Not really sure what I'm doing wrong. My phone was on the ME7 version (And running a SafeStrap rom) before I wanted to restore it today.
xMopx said:
Hi, I'm trying to restore my phone to stock using ODIN.
I have Odin 3.09 and have the latest Scamsung Kies installed (for the usb driver).
The file I am flashing is: http://www.androidfilehost.com/?fid=23203820527944861
The message log I get from Odin is:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Not really sure what I'm doing wrong. My phone was on the ME7 version (And running a SafeStrap rom) before I wanted to restore it today.
Click to expand...
Click to collapse
You can't flash backwards. Flash me7.
gnubian said:
You can't flash backwards. Flash me7.
Click to expand...
Click to collapse
That makes sense, I wasn't aware that I was using an older firmware file. I'm having trouble finding the ME7 file, could you point me to a copy? Thanks!
xMopx said:
That makes sense, I wasn't aware that I was using an older firmware file. I'm having trouble finding the ME7 file, could you point me to a copy? Thanks!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2357235
That will wipe everything, so make sure to back up your files if you haven't already. Good luck!
gnubian said:
http://forum.xda-developers.com/showthread.php?t=2357235
That will wipe everything, so make sure to back up your files if you haven't already. Good luck!
Click to expand...
Click to collapse
Thanks! But with that file I got this error:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I545VRUAME7_I545VZWAME7_690088_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Which from what I could find, meant I needed to repartition. So I grabbed the Pit file in this thread: http://forum.xda-developers.com/showthread.php?t=2290859
But got this:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I545VRUAME7_I545VZWAME7_690088_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Edit: I did have Safestrap recovery installed - do I need to flash a stock recovery or is it contained in that firmware file?
xMopx said:
Thanks! But with that file I got this error:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I545VRUAME7_I545VZWAME7_690088_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Which from what I could find, meant I needed to repartition. So I grabbed the Pit file in this thread: http://forum.xda-developers.com/showthread.php?t=2290859
But got this:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I545VRUAME7_I545VZWAME7_690088_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Edit: I did have Safestrap recovery installed - do I need to flash a stock recovery or is it contained in that firmware file?
Click to expand...
Click to collapse
Just go to the safestrap app in app drawer on stock slot and uninstall it.
gnubian said:
Just go to the safestrap app in app drawer on stock slot and uninstall it.
Click to expand...
Click to collapse
I can't do that anymore, a result of these failed flashes is that I can't boot the system currently.
xMopx said:
I can't do that anymore, a result of these failed flashes is that I can't boot the system currently.
Click to expand...
Click to collapse
What happens when you start the phone?
gnubian said:
What happens when you start the phone?
Click to expand...
Click to collapse
It says:
FIrmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I tried using the Kies recovery, but it doesn't detect that the phone needs recovering (both on that screen and the download screen used for odin).
xMopx said:
It says:
FIrmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I tried using the Kies recovery, but it doesn't detect that the phone needs recovering (both on that screen and the download screen used for odin).
Click to expand...
Click to collapse
Are you positive you were on me7 and not mj7? Because the error you got for me7 looks the same as the one for mdk...
gnubian said:
Are you positive you were on me7 and not mj7? Because the error you got for me7 looks the same as the one for mdk...
Click to expand...
Click to collapse
Positive. I had installed the rom/recovery before anything newer than me7 was released. And I remember when I upgraded from whatever it shipped with to ME7 because the upgrade window popped up and I tapped Install by accident. I had this installed: http://forum.xda-developers.com/showthread.php?t=2351840.
Edit: to confirm, I found my old post asking about the modules to get that rom to work on ME7: http://forum.xda-developers.com/showthread.php?p=46944438
Was waiting for someone else to chime in who may know more than me. Have you tried booting into recovery from being powered off?
gnubian said:
Was waiting for someone else to chime in who may know more than me. Have you tried booting into recovery from being powered off?
Click to expand...
Click to collapse
No problem, but yeah. After every failure I would battery-pull and go back into recovery.
Edit: Tried a different USB cable and a different computer today. No dice
xMopx said:
No problem, but yeah. After every failure I would battery-pull and go back into recovery.
Edit: Tried a different USB cable and a different computer today. No dice
Click to expand...
Click to collapse
So when you went to recovery it went to stock recovery I'm assuming? Or you got the error?
If it went to stock recovery did you try wiping everything before flashing in odin?
gnubian said:
So when you went to recovery it went to stock recovery I'm assuming? Or you got the error?
If it went to stock recovery did you try wiping everything before flashing in odin?
Click to expand...
Click to collapse
Err sorry, I meant download mode (Power+Voldown). If I try booting into recovery, I get the dead android: http://i.imgur.com/HRWVsvZ.jpg
xMopx said:
Err sorry, I meant download mode (Power+Voldown). If I try booting into recovery, I get the dead android: http://i.imgur.com/HRWVsvZ.jpg
Click to expand...
Click to collapse
Try finding a stock recovery tar for your build and just flashing that in odin.
gnubian said:
Try finding a stock recovery tar for your build and just flashing that in odin.
Click to expand...
Click to collapse
I had the thought of doing this, but wasn't able to find one.
xMopx said:
I had the thought of doing this, but wasn't able to find one.
Click to expand...
Click to collapse
I looked around a little and didn't fine one either. I'd try making a request thread, I'm sure someone knows how to make a tar of it you can use in odin.
gnubian said:
I looked around a little and didn't fine one either. I'd try making a request thread, I'm sure someone knows how to make a tar of it you can use in odin.
Click to expand...
Click to collapse
Isn't the recovery contained in the larger firmware files? What gain would flashing the stock recovery get?
I'm thinking I might just take the phone to a Verizon store and say, "Samsung kies told me it was going to update my phone, I took a shower and when I came back it was like this".
Edit: I untarred the firmware file, and it contained recovery.img. Can I flash that with odin?
xMopx said:
Isn't the recovery contained in the larger firmware files? What gain would flashing the stock recovery get?
I'm thinking I might just take the phone to a Verizon store and say, "Samsung kies told me it was going to update my phone, I took a shower and when I came back it was like this".
Edit: I untarred the firmware file, and it contained recovery.img. Can I flash that with odin?
Click to expand...
Click to collapse
I believe it has to be a tar. If you can get it on there and wipe data/factory reset it may get rid of safestrap and allow you to odin the full stock tar.
Hi,
I am trying to flash firmware BOG2 over BOC1 and I am consistently getting flash fail with the below error message.
I have changed the USB cable/port as well nothing works?Any help
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> R750XXU2BOG2_R750OXA2BOG2_R750XXU2BOG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> dzImage
<ID:0/007> NAND Write Start!!
<ID:0/007> dzImage-recovery
<ID:0/007> sbl1.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
rocky272727 said:
Hi,
I am trying to flash firmware BOG2 over BOC1 and I am consistently getting flash fail with the below error message.
I have changed the USB cable/port as well nothing works?Any help
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> R750XXU2BOG2_R750OXA2BOG2_R750XXU2BOG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> dzImage
<ID:0/007> NAND Write Start!!
<ID:0/007> dzImage-recovery
<ID:0/007> sbl1.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
Click to expand...
Click to collapse
I got pretty much the same error. As like you I have BOC and tried to flash BOG2.
Seems that bootloader is not recognized as compatible, no matter in fact it is. Seems modem is maybe different.
If anyone has any clue on how to workaround this issue, plz, let us know.
bump
Solved
andrew.mackew said:
I got pretty much the same error. As like you I have BOC and tried to flash BOG2.
Seems that bootloader is not recognized as compatible, no matter in fact it is. Seems modem is maybe different.
If anyone has any clue on how to workaround this issue, plz, let us know.
Click to expand...
Click to collapse
Hi,
I figured it out. BOG2 is a 2.2.1.4 and BOC1 is 2.2.1.5 (R750WVLU1BOC1), so downgrade not possible for bootloader.
rocky272727 said:
Hi,
I figured it out. BOG2 is a 2.2.1.4 and BOC1 is 2.2.1.5 (R750WVLU1BOC1), so downgrade not possible for bootloader.
Click to expand...
Click to collapse
Thanks for let me know that. Appreciate. :good:
same
well i got the same error , was trying to install cm on the watch then got stuck on samsung screen tried flashing the tizen firmware 4 files but everytime i end up with that thing do u know how to fix it ?!
Hello XDA,
I did brick my phone by trying to downgrade to 5.0.2 from 5.1.1 and bricked my phone and searching this forum I felt that there should be a post like this to ease the journey of people like me. As I did learn a lot from my 5 years android journey, I would like help everybody like me. Therefore if I find any important/"you may not know" fixes, I will share here with headings. Also If you have another solutions for any problems of these kind; please write here so I can collect em' all in the OP. Let's go!
-ODIN fail while flashing hidden.img-
Solution: This is caused because of your partition(pit). In XDA, you can find .pit files of S6 Edge for several models (i.e. I have a g925f so i have to find the corresponding pit file. The one worked for me was the G925F pit with Hidden_300M. First you flash this pit to your phone, then try to flash your rom; you're good to go!
Solution 2 Thanks to @Alex-V : Just delete the hidden.img from the rom.
---------------------------------------------------------------
-If you can't properly enter to recovery mode-
Solution: Please do the combo "Volume Down-Home-Power" until you reach download mode. When you reach there again do the same combo until the screen goes off. When it goes off QUICKLY switch to "Volume Up-Home-Power" combo and hold it until the screen comes in and dims a bit. When it dims release all buttons and ta-da you're in recovery mode.
---------------------------------------------------------------
-ODIN gives a fail at NAND write-
Solution: This problem is caused because of the nand mismatches (generally, or build differences etc.). Doing this may cause a hard-brick IF YOU DON'T follow the instructions CAREFULLY.
1) Get your device to download mode by using this combo "VolumeDown-Home-Power"
2) Open an UP TO DATE ODIN.
3) Find the corresponding .PIT file for your S6 EDGE.
4) Find the corresponding stock rom for your S6 EDGE.
5) Then put them into odin CORRECTLY. Rom to "AP", .pit to PIT
6) Make Sure these are checked: "Re-partition","NAND all erase"
7) Plug your device in and then press start.
After these you should be already flashed correctly without any nand write fail.
---------------------------------------------------------------
-SW REV CHECK FAIL DEVICE: 2 BINARY:1-
This happens when you try to downgrade from 5.1.1... Thanks to Samsung, we can not downgrade to repair our phones or save them because of the locked bootloader. So you have to flash to 5.1.1 again.
If anyone with a working rooted phone, can he/she share his/her own nand backup, so people with screwed boots can recover
or simple delete the hidden.img
Added to the post, thanks mate. Also looking for how to fix corrupted sdcard (theres no mmcblk0x file)
Hi,
I'm following your advice to try and overcome my S6 Edge's issue with failing to NAND write but I am still getting the same NAND write fail. I have another post detailing the issue here http://forum.xda-developers.com/showpost.php?p=67930722&postcount=5 if you want more info but I'll just post the Odin log here too just in case you can spot where I went wrong.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925W8VLU1AOCG_G925W8OYA1AOCG_G925W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Erase...
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My device is an S6 Edge G925W8. Thanks.
Please Respond
Malganor said:
Hi,
I'm following your advice to try and overcome my S6 Edge's issue with failing to NAND write but I am still getting the same NAND write fail. I have another post detailing the issue here http://forum.xda-developers.com/showpost.php?p=67930722&postcount=5 if you want more info but I'll just post the Odin log here too just in case you can spot where I went wrong.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925W8VLU1AOCG_G925W8OYA1AOCG_G925W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Erase...
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My device is an S6 Edge G925W8. Thanks.
Click to expand...
Click to collapse
I am also getting the exact same thing. I Put in the pit file like instructed as well as the correct rom... still get the same NAND WRITE START.
Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925W8VLU1AOCG_G925W8OYA1AOCG_G925W8VLU1AOCG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Erase...
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)