Hey guys,
So i was running the leaked GB radio and BAMF 2.0.5 until last night when I decided to avoid the brick monster until things were sorted. Nevertheless I couldnt find a thread which clearly stated either to install the older radio or rom first so I used my intuition and backed up, installed the #1 radio from the Ob Radio thread then booted and rebooted into recovery via adb and installed BAMF 1.7. I was not able to gain mobile data at anytime so I tried Radio #3 with also negative results..
Is there something im doing wrong? I wiped Data and Cache and Dalvik 3x times before flashing anything to be sure the GB reminents were gone. Should I reflash the rom then radio? Im lost.. Thanks for the help..
Reflash both.
Same thing happen to me. I have try everything. I had to flash back to stock ota And then 4G came back. Then I had the root all over again. That should be your last option though
Sent from my Thunderbolt using Tapatalk
I flashed the update all in one ROM, which gave me a rooted verizon OTA, and the radio worked just fine, 4G working faster than with the GB radio.
After that I flashed the 4th Froyo radio, then BAMF 1.7, and all is still good! I miss Netflix though!
So Pray just to be certain you flashed the "Custom upgrade PG05IMG_MR1_upgrade.zip" from step 7 of the Root thread? Then flashed Radio #4 which is version
Next up, the 1.12.605.6 CDMA and 1.13.605.7 LTE radio
CDMA Radio version: 1.16.00.0223r
LTE radio version that came with 1.13.695.7
Am I missing anything?
d.scardino said:
So Pray just to be certain you flashed the "Custom upgrade PG05IMG_MR1_upgrade.zip" from step 7 of the Root thread? Then flashed Radio #4 which is version
Next up, the 1.12.605.6 CDMA and 1.13.605.7 LTE radio
CDMA Radio version: 1.16.00.0223r
LTE radio version that came with 1.13.695.7
Am I missing anything?
Click to expand...
Click to collapse
Correct. But unless you are going to run CM7 I wouldn't flash the old 223r radio, I'd just flash the upgrade RUU and you're good.
Related
Sent from my ADR6400L using XDA App
Did you flash a Gingerbread radio? That is almost 99% of the time the issue. You can't run 2.0 on stock Froyo radio. If you need help I can help further pm me.
similar issue,
flashed this rom - [ROM][5.25.11] BAMF GingerREMIX v2.0 Beta #5
http://forum.xda-developers.com/showthread.php?t=1095280
Install went fine, but phone would not work and sim card not found. You mention gingerbread radio since froyo wont work. Its not listed in that post that a seperate flash is required. Had to reflash back to bamf 1.63 remix to get phone working.
Any help would be appreciated.
Duroe said:
similar issue,
flashed this rom - [ROM][5.25.11] BAMF GingerREMIX v2.0 Beta #5
http://forum.xda-developers.com/showthread.php?t=1095280
Install went fine, but phone would not work and sim card not found. You mention gingerbread radio since froyo wont work. Its not listed in that post that a seperate flash is required. Had to reflash back to bamf 1.63 remix to get phone working.
Any help would be appreciated.
Click to expand...
Click to collapse
It mentions the GB RUU so that means you have to have it. Which btw it's known to brick your phone without warning.
The reason you did not have any data is because you were still using the froyo radio, to run any of the BAMF 2.0's you need the gingerbread radio.
grab the mr2 radio. that will work
Hacride said:
The reason you did not have any data is because you were still using the froyo radio, to run any of the BAMF 2.0's you need the gingerbread radio.
Click to expand...
Click to collapse
This is what it recommends I do
Things to know:
•A FULL WIPE IS HIGHLY RECOMMENDED!
•This is a leaked GB RUU, it has bugs, all we can do is try our best to squash them! Flash at your own risk.
I thought the gingerbread radio was also included in the rom(my mistake). From a novice point of view. If I do a full wipe and then install bamf 2.0.
1. What method can be utlized to flash the gingerbread radio?
2. What is the correct gingerbread radio for bamf 2.0?
3. Is there a way to flash bamf 2.0 with the updated radio already included in the rom?
Thanks again in advance.
hey mojo they never found the cause of the few bricks so what you said was false and you flash the radio in hboot read the thread on rooting or the radios it tells you all you need to know how to flash it doesnot matter what order you flash the rom and radio just remember to delet the radio file from your sd card once you flashed it
sent via my bamfed out tbolt
Duroe said:
This is what it recommends I do
Things to know:
•A FULL WIPE IS HIGHLY RECOMMENDED!
•This is a leaked GB RUU, it has bugs, all we can do is try our best to squash them! Flash at your own risk.
I thought the gingerbread radio was also included in the rom(my mistake). From a novice point of view. If I do a full wipe and then install bamf 2.0.
1. What method can be utlized to flash the gingerbread radio?
2. What is the correct gingerbread radio for bamf 2.0?
3. Is there a way to flash bamf 2.0 with the updated radio already included in the rom?
Thanks again in advance.
Click to expand...
Click to collapse
Radios are seperate. They need to be flashed in the bootloader. Use the MR2 radio as the other radio bricks your phone.
satseaker said:
hey mojo they never found the cause of the few bricks so what you said was false and you flash the radio in hboot read the thread on rooting or the radios it tells you all you need to know how to flash it doesnot matter what order you flash the rom and radio just remember to delet the radio file from your sd card once you flashed it
sent via my bamfed out tbolt
Click to expand...
Click to collapse
No what you just said was false. Since they don't know where the bricking comes from, it's safe to say that its possibly from that radio. SOOOOOOOO use the MR2 radio instead.
there is no rom with the radio included, put the mr2 on your sd card rename it,reboot the phone and hold the down volume and power button until it brings you into the boot loader it will find the file and ask it u want to update hit the power button wait til its done and reboot
sent via my bamfed out tbolt
satseaker said:
there is no rom with the radio included, put the mr2 on your sd card rename it,reboot the phone and hold the down volume and power button until it brings you into the boot loader it will find the file and ask it u want to update hit the power button wait til its done and reboot
sent via my bamfed out tbolt
Click to expand...
Click to collapse
i think its vol up to start the update. dunno if pressing power starts it to but just in case
ok then explain to me how my phone went into the loop when it never had gingerbread on it,you make an assumtion and then say its the truth that is wrong.
sent via my bamfed out tbolt
satseaker said:
ok then explain to me how my phone went into the loop when it never had gingerbread on it,you make an assumtion and then say its the truth that is wrong.
sent via my bamfed out tbolt
Click to expand...
Click to collapse
Uhhhhhh that can happen for MULTITUDES of reasons. get real. All i'm saying is the cause is not known so use the MR2 one instead. Jeez you kids and always wanting to start ****.
volume down and power gets you the bootloader vol up starts the flash
sent via my bamfed out tbolt
had to go back and read again myself
sent via my bamfed out tbolt
mojonation1487 said:
Radios are seperate. They need to be flashed in the bootloader. Use the MR2 radio as the other radio bricks your phone.
Click to expand...
Click to collapse
I have downloaded the mr2 radio
http://forum.xda-developers.com/showthread.php?t=1115714
Just want to confirm, once I follow the steps I had previously posted,
1. manually flash bamf 2.0 from recovery
2. go in to bootloader and flash m42 radio
I should be up and running? Minus any of the known bugs obviously...
Duroe said:
I have downloaded the mr2 radio
http://forum.xda-developers.com/showthread.php?t=1115714
Just want to confirm, once I follow the steps I had previously posted,
1. manually flash bamf 2.0 from recovery
2. go in to bootloader and flash m42 radio
I should be up and running? Minus any of the known bugs obviously...
Click to expand...
Click to collapse
yup but make sure before you flash anything you wipe data, cache, dalvik cache. After everything is done throw in a fix permissions just for good measure and you're good to go.
Im now up and running with bamf 2.0
Thanks
Thanks all . Bamf Rom running well now with service after Mr2 radio flashed
Sent from my ADR6400L using XDA App
Ok.. I have read through some other posts..
First thing I did was flash the new radio (#1 on "Obligatory Radio thread).. I used hboot after putting the file directly onto the root of my phone..
Then I downloaded 2.1 Bamf.. i preformed the flash in ROM manger.. After all went through I had no service..
I re-hbooted the radio, just for safe measures.. still no service... To make things worse i can''t acess my HD through my computer..
HELP PLEASE!!
I am getting an
"application sync service (in process com.fusonone.android.sync.service) is not responding
and a
HTC DM (in process com.htc.android.omadm.service) is not responding
The Gingerbread BAMF ROMs require the Gingerbread radio. You flashed a Froyo radio instead. Go back and grab the right radio.
I was under the impression the radio I flashed was a GB radio.. it was a link directly from the BAMF thread.. If i am mistaken I am extremly sorry for wasting your time..
What is a correct GB radio?
The newest GB radio can be found here. I'm not sure which version was in the Radio thread, but it was the last one listed.
Thanks..
Although, now when i flash that radio... same thing happens.. No service..
Do I need to do anything special? I am using Hboot to flash it..
I would re-flash the rom and then install the radio again or revert back to your old rom and radio and then redo it. I always flash roms from the clockwork mod recovery screen as I have had issues doing it with rom manager.
And there we goo.. Thank you both VERY MUCH!!
No problem glad i could help!
My Thunderbolt is arriving on Wed so doing some research before rooting and flashing ROMS/RADIOS.
Here are my questions:
1. Stock Thunderbolt will come from Verizon with Froyo and MR1 radio. Is this correct?
2. I plan on running Gingerbread ROM builds, so I understand I need the MR2 radio. Do I flash the radio BEFORE flashing GB ROMS or after? And do I let it fully reboot between flashing Radio/Roms?
I appreciate any help. Sorry if this has been asked before. Just making sure i'm doing the right thing.
I actually doesn't really matter what order you flash them in. I've forgotten which Radio I was on and when the ROM boots everything is fine there is just no signal. Flash the right radio, reboot, and it works perfectly fine.
I would definitely flash the radio again after flashing the ROM. Some people have reported problems with SMS when they flash the radio before flashing the ROM. I was one of those people myself and after re-flashing the Radio all was well.
I currently run DasBAMF 2.1 based off Gingerbread with the MR2.5 radio and love it.
Link to the ROM
http://forum.xda-developers.com/showthread.php?t=1131735
Link to the Radio
http://forum.xda-developers.com/showthread.php?t=1127436
USSENTERNCC1701E is correct. it makes no difference. The only thing is if you flash the radio first. when it reboots you will not have service which you don't need to flash the rom. running Das BAMF sense 3 RC3 with MR-2 radio, works great.
I switched to a GB rom last night.
Wiped, Flashed Rom, at the end, before rebooting, I did a battery pull.
Booted to hboot, flashed radio, set up phone, all gravy
Hi All,
I've been able to successfully run CM7 7.1.1 and MR2 radio successfully on my Tbolt. I tried to help a friend out with his slightly older Tbolt and used the Radio guide found here http://forum.xda-developers.com/showthread.php?t=1048128. His baseband reads 1.13.605.7, so we matched it up with the list and downloaded the file and applied successfully with HBOOT.
The problem with run into is when we flash CM7 and boot up, we always get a "SIM card unavailable, emergency calls only" message and the baseband reads "version unavailable", everything works under the stock rom and we can see the radio versions have changed to the ones we flashed, so a faulty flash doesn't appear to be the problem. Any ideas what we've done wrong?
Thanks in advance.
I'm not 100% sure, but I believe you have to use a newer radio than the one you mentioned with CM7. Download the newest radio available, flash it, then you should get service with CM7.
How do I find the newer radio, and are there different versions?
Thanks.
Sent from my ADR6400L using XDA App
newest radio are the official released 1.48.00.0906w_1, 0.01.78.0906w_2
http://support.verizonwireless.com/pdf/system_update/thunderbolt.pdf
Either download them as a package or go to the thunderbolt radio thread in the dev section and download the CDMA and LTE seperate, and flash both through HBOOT.
TL;DR fixed it so that I could get on the VZW network but I can't update to the latest global firmware. My Baseband version is 2.22.100801r/2.22.10.0803r but the RUU won't run.
OK so I was getting horrible speeds (50kB/sec down) on neo's new ROM and I noticed that my radio/firmware wasn't matching (one ended in 21r and the other ended in 23r) so I decided to update the radio to the newest global by running the global RUU but it wouldn't run it just said "parsing" and then would bring me back to hboot. So I downloaded the latest firmware/radio combo from the combo thread in android dev and flashed it. I rebooted into the ROM and it said "baseband unknown" and wouldn't connect to cell or data, so I wiped data and rebooted then android.phone kept crashing, so I tried to run the firmware update again and it didn't change the radio. The RUU wouldn't run either. I tried flashing the radio partition using the radio.img from the RUU and it was successful but upon reboot the radio/firmware version didn't change.
I'm at a loss of what to do now.
I'm s-off, on hboot 2.27 and my radio version is 2.22.100801r/2.22.10.0803r
OpenDSP-v14.6.0.7708.00.0507
The radio image that I grabbed from that thread said that it was the latest and was from last month so I figured it was correct.
I'm in desperate need of help...
edit: I just relashed a ROM to get it so that it would boot to Android and it connected to 3G and the cell network so that's good and I'm back in business. The only remaining question is how can I get it updated to the current firmware?
brando56894 said:
TL;DR fixed it so that I could get on the VZW network but I can't update to the latest global firmware. My Baseband version is 2.22.100801r/2.22.10.0803r but the RUU won't run.
OK so I was getting horrible speeds (50kB/sec down) on neo's new ROM and I noticed that my radio/firmware wasn't matching (one ended in 21r and the other ended in 23r) so I decided to update the radio to the newest global by running the global RUU but it wouldn't run it just said "parsing" and then would bring me back to hboot. So I downloaded the latest firmware/radio combo from the combo thread in android dev and flashed it. I rebooted into the ROM and it said "baseband unknown" and wouldn't connect to cell or data, so I wiped data and rebooted then android.phone kept crashing, so I tried to run the firmware update again and it didn't change the radio. The RUU wouldn't run either. I tried flashing the radio partition using the radio.img from the RUU and it was successful but upon reboot the radio/firmware version didn't change.
I'm at a loss of what to do now.
I'm s-off, on hboot 2.27 and my radio version is 2.22.100801r/2.22.10.0803r
OpenDSP-v14.6.0.7708.00.0507
The radio image that I grabbed from that thread said that it was the latest and was from last month so I figured it was correct.
I'm in desperate need of help...
edit: I just relashed a ROM to get it so that it would boot to Android and it connected to 3G and the cell network so that's good and I'm back in business. The only remaining question is how can I get it updated to the current firmware?
Click to expand...
Click to collapse
try the full global ruu from android police or one from the roms that have it in their op! that should help, do you have a stock hboot or modified one?
brando56894 said:
TL;DR fixed it so that I could get on the VZW network but I can't update to the latest global firmware. My Baseband version is 2.22.100801r/2.22.10.0803r but the RUU won't run.
OK so I was getting horrible speeds (50kB/sec down) on neo's new ROM and I noticed that my radio/firmware wasn't matching (one ended in 21r and the other ended in 23r) so I decided to update the radio to the newest global by running the global RUU but it wouldn't run it just said "parsing" and then would bring me back to hboot. So I downloaded the latest firmware/radio combo from the combo thread in android dev and flashed it. I rebooted into the ROM and it said "baseband unknown" and wouldn't connect to cell or data, so I wiped data and rebooted then android.phone kept crashing, so I tried to run the firmware update again and it didn't change the radio. The RUU wouldn't run either. I tried flashing the radio partition using the radio.img from the RUU and it was successful but upon reboot the radio/firmware version didn't change.
I'm at a loss of what to do now.
I'm s-off, on hboot 2.27 and my radio version is 2.22.100801r/2.22.10.0803r
OpenDSP-v14.6.0.7708.00.0507
The radio image that I grabbed from that thread said that it was the latest and was from last month so I figured it was correct.
I'm in desperate need of help...
edit: I just relashed a ROM to get it so that it would boot to Android and it connected to 3G and the cell network so that's good and I'm back in business. The only remaining question is how can I get it updated to the current firmware?
Click to expand...
Click to collapse
Looks like you're on the latest firmware to me. Your baseband version and hboot are the newest
Oh OK thanks, I didn't know if that was the newest baseband because in Neo's new rage AOSP ROM he mentions that you should be on the newest firmware which he states is 1.22.10.0424r
If I am truly on the latest firmware then that makes complete sense as to why it won't upgrade
brando56894 said:
Oh OK thanks, I didn't know if that was the newest baseband because in Neo's new rage AOSP ROM he mentions that you should be on the newest firmware which he states is 1.22.10.0424r
If I am truly on the latest firmware then that makes complete sense as to why it won't upgrade
Click to expand...
Click to collapse
I believe he just meant the ICS original ota radios. I can't speak for him, however, the radios and hboot you have are all current, so you're good to go!
Hi all my phone is stuck on the 4G screen and won't boot up. I'm not sure what to do at this point. I've been in ra recovery and wiped and flashed and wiped and flashed some more. I'm stuck and need some help.
what rom are you on?