Good night.
I've flashed with no problems the Telstra 1.4.2 Radio N_01.87.00R radio in the past. I wanted to try the OLYLA_U4_0.50.0_R03 radio (Retail Brazil) but I can't make a working SBF.
If I try to compile it with desbf.exe or Moto Android (De)packer 1.3 when I try to flash I get a sec_exception: febe, 35, 35 error.
I tought it was something related to the ram downloaders. So I used all the 4.1.8.3 CG5 files (cefs.mbn, dbl_sec.mbn, firmware.hmg, firmware.xml, osbl_sec.mbn, partition.mbn, RDL1.smg, RDL3.smg) except amss_sec.mbn wich under my understand its the radio.
Then when I try to flash the sbf I get a e003003f error in RSD Lite.
I ended flashing the Telstra 1.4.2 Radio N_01.87.00R again, since I couldn't flash the Brasil one, nor the N_01.92.00R radio.
Only reason I want to try the Retail Brazil radio is that is that Argentina carriers usually import Motorola phones from Brazil. So the radio of this rom should work in my phone much better than the Telstra one (in theory), since its developed for my area.
I will appreciate if someone can point me in the right direction.
Thanks in advance.
Is your Atrix come from AT&T or Bell or Stock
Sam
sammm said:
Is your Atrix come from AT&T or Bell or Stock
Sam
Click to expand...
Click to collapse
Sorry, I forgot to mention it. Its an AT&T one.
Thanks, I have a AT&T Atrix as well. Been having some problem trying to place call to a Telstra T3020 Android. That was the only phone I have problem calling so far. When in call connection, it shows connected but there are no audio at all what so ever. connection is stuck can't hang up call. Eventually the Atrix reboot itself.
I will try flashing the new radio see if this is gona fix me problem.
PS: I have download the 1.4.2 radio and it's full sbf file today. I'm temped but not game enough to flash it. It only report working on the Bell's Atrix.
Sammm
sammm said:
Thanks, I have a AT&T Atrix as well. Been having some problem trying to place call to a Telstra T3020 Android. That was the only phone I have problem calling so far. When in call connection, it shows connected but there are no audio at all what so ever. connection is stuck can't hang up call. Eventually the Atrix reboot itself.
I will try flashing the new radio see if this is gona fix me problem.
PS: I have download the 1.4.2 radio and it's full sbf file today. I'm temped but not game enough to flash it. It only report working on the Bell's Atrix.
Sammm
Click to expand...
Click to collapse
There's a topic in the development section with a sbf for the AT&T Atrix. Its not a full sbf, just the radio. I'm using it and it works fine.
Hi Whipon
I have try to flash the 1.4.2 radio sbf. It come up error on the phone :
" sec_exception: febe, 35, 35 .. RSD Lite report fail "
What method did you use to get it working??
Sammm
sammm said:
Hi Whipon
I have try to flash the 1.4.2 radio sbf. It come up error on the phone :
" sec_exception: febe, 35, 35 .. RSD Lite report fail "
What method did you use to get it working??
Sammm
Click to expand...
Click to collapse
There's a two topics with that radio, the most recent one is the one for the Atrix.
Back on topic, can anyone, please, tell me how can I flash the Retail Brazil radio to my phone?.
Thanks to NFHimself I managed to make a working SBF.
I used desbf to delete everything but RDL1, RDL3 and CG5 then replaced CG5 with the radio I wanted.
With the Retail Brazil radio, I don't have internet access. Can't understand why since I have the 3G connectivity icon in the status bar and in the info menu it says I'm on UMTS. I also have the signal meter full.
Similiar behaviour with the 4.2.1.1 radio, but this one only gives me one signal bar.
I wanted to try the other Brazilian radios, but I'm almost sure they will not work.
So it seems the only working radio with AT&T Atrix (other than the AT&T ones) its the Telstra 4.1.4.2 one. I had to reflash it, since the other two radios doesn't work.
Now I'll have to find a working radio wich gives me HSPA. At the moment I only get UMTS.
Whipon said:
Thanks to NFHimself I managed to make a working SBF.
I used desbf to delete everything but RDL1, RDL3 and CG5 then replaced CG5 with the radio I wanted.
With the Retail Brazil radio, I don't have internet access. Can't understand why since I have the 3G connectivity icon in the status bar and in the info menu it says I'm on UMTS. I also have the signal meter full.
Similiar behaviour with the 4.2.1.1 radio, but this one only gives me one signal bar.
I wanted to try the other Brazilian radios, but I'm almost sure they will not work.
So it seems the only working radio with AT&T Atrix (other than the AT&T ones) its the Telstra 4.1.4.2 one. I had to reflash it, since the other two radios doesn't work.
Now I'll have to find a working radio wich gives me HSPA. At the moment I only get UMTS.
Click to expand...
Click to collapse
I was having problems with the stock At&t 4.1.83 radio here in ecuador. I also tried the Telstra and works better but sometimes I loose the conection and my ping times are very bad.
Could you please upload the brazilian Atrix radio, I would like to give it a try
josuetenista said:
I was having problems with the stock At&t 4.1.83 radio here in ecuador. I also tried the Telstra and works better but sometimes I loose the conection and my ping times are very bad.
Could you please upload the brazilian Atrix radio, I would like to give it a try
Click to expand...
Click to collapse
I will upload it when I arrive home.
Be advised you'll lose internet conectivity with it if you flash it on an AT&T Atrix.
did u try to manualy type in the APNs?
shadowjack1 said:
did u try to manualy type in the APNs?
Click to expand...
Click to collapse
The apn never got deleted. It remains there. I've flashed several radios and never had to reenter the apn again. As I said, phone shows 3G.
I've uploaded the SBF in case someone wants to try it.
Its in this topic.
Remember this will only work on an AT&T Atrix.
Brazil radio
Hi i'm from Brazil, and i change my radio and it's drops 3g.
Where i found Brazi radio OLYLA_U4_0.50.0_R03 radio to download?
Thanks!
I had the same problem on my atrix where it would just try to connect and then reboot. i flashed Radio 01.8700r and it works fine, of course you will have to insert the apn in manually
Related
Hallow.
I have upraded my Vario2 to the following settings:
IPL-1.04, SPL-2.10.Olipro,
with Radio V-1.41.00.10 and WM6 pro Black 3.0.1 ROM .
The upgrading went perfect with no problems.
The device boot properly.
The only problem is that the data connection stays on GPRS where I know there is a 3G connect.
T-Mobile support dont want to help solving this problem.
Any Idea anyone?
Regards
Lior Lavon.
umm to my understading T-MOBILE only has EDGE not 3G...at least in the U.S.
LunaWizard said:
umm to my understading T-MOBILE only has EDGE not 3G...at least in the U.S.
Click to expand...
Click to collapse
Well it is not the case in holland, TMobile has 3G and UMTS.
Any way I had 3G before I upgraded the device.
Have you tried putting your Radio Rom back to 1.40 just to see if that makes a difference?
llavon said:
Hallow.
I have upraded my Vario2 to the following settings:
IPL-1.04, SPL-2.10.Olipro,
with Radio V-1.41.00.10 and WM6 pro Black 3.0.1 ROM .
The upgrading went perfect with no problems.
The device boot properly.
The only problem is that the data connection stays on GPRS where I know there is a 3G connect.
T-Mobile support dont want to help solving this problem.
Any Idea anyone?
Regards
Lior Lavon.
Click to expand...
Click to collapse
I take it you had 3G before you upgraded? I would point the fault at the operator settings have you reinstalled these since the upgrade? You will need to search on xda for the operator settings there are cab files for them.
Have you tried flashing black 3.0.1 again? I know this sounds weird but I had the same problem at first, when I reflashed it, I had 3G again
Cheers
Jygar said:
Have you tried putting your Radio Rom back to 1.40 just to see if that makes a difference?
Click to expand...
Click to collapse
can I use an old radio with the same ROM of WM6? or I need also to change the ROM to older one?
boz said:
I take it you had 3G before you upgraded? I would point the fault at the operator settings have you reinstalled these since the upgrade? You will need to search on xda for the operator settings there are cab files for them.
Click to expand...
Click to collapse
1) Yes I had a 3G before and I lost it after the upgrade process.
2) I followd the instruction in T-Mobile site about the requested configuration.
3) I will look for the cab files you mentioned about the operetor setting.
What would be a good test? to change my Radio or my ROM version?
And to what version?
Regards.
llavon said:
1) Yes I had a 3G before and I lost it after the upgrade process.
2) I followd the instruction in T-Mobile site about the requested configuration.
3) I will look for the cab files you mentioned about the operetor setting.
What would be a good test? to change my Radio or my ROM version?
And to what version?
Regards.
Click to expand...
Click to collapse
Here is the cab file you require below. Have you checked with t-mobile that the service is ok where you are? If this is not the problem, I would first try a soft reset, if no improvement try a hard reset. Failing that try downgrading your radio to 1.40 as I found this radio version better than 1.41. (remember to soft reset after, and remember the radio upgrade/downgrade will not cause you to lose anything you have saved on your device). If this does not work then try reinstalling the black rom.
But I would bet it is the operator settings.
Close, but no cigar......
boz said:
Here is the cab file you require below. Have you checked with t-mobile that the service is ok where you are? If this is not the problem, I would first try a soft reset, if no improvement try a hard reset. Failing that try downgrading your radio to 1.40 as I found this radio version better than 1.41. (remember to soft reset after, and remember the radio upgrade/downgrade will not cause you to lose anything you have saved on your device). If this does not work then try reinstalling the black rom.
But I would bet it is the operator settings.
Click to expand...
Click to collapse
The Dutch settings for T-Mobile (not the UK ones, @boz ) can be found >HERE< - this is by far the easiest thing to try before you get stuck in with downgrading radio versions or reflashing the ROM....well, IMHO it is
Cheers,
Mark.
Mark Crouch said:
The Dutch settings for T-Mobile (not the UK ones, @boz ) can be found >HERE< - this is by far the easiest thing to try before you get stuck in with downgrading radio versions or reflashing the ROM....well, IMHO it is
Cheers,
Mark.
Click to expand...
Click to collapse
Just shows that even I need to read properly sometimes!
make sure the ROM ur using has 3g as some roms dont
Im having the most annoying problems with my photon
all used to work well, signal bars were great.
then one day i had a fail to boot message, so i flashed this SBF
http://forum.xda-developers.com/showthread.php?t=1202666
And nothings been the same. It seems my radio/baseband is messed up
I have it set to GSM Only as usual
but every now and then it just loses signal ( i think when it switches towers) and wont come back till i reset it. and other times itll switch to 'Automatic' and think its a CDMA phone.
And the most annoying part is most of the time ill have 'signal' but little do i know no text messages are getting to me. and no phone calls. and if i try a phone call it hangs up a second in. These problems are all intermittent, itll suddenly just work after time, then stop after time. I thought it was my SIM Card but all is functional 100% in a different phone. I hope i dont have a sudden hardware problem in the phone itself.
I tried flashing to old SBFs, factory resetting nothing works
Ofcourse I skip the handset activation at the beginning as im in canada (GSM) and i cant seem to 'factory reset' the radio or use any of those codes because im in Canada and it asks for a passcode that i dont have
if ANYONE knows nething i can do pelase help, because its looking like i have to ditch the photon
I flashed my phone with that too, but no network problem after that.
I guess you have tried already to flash again. I'm also on gsm only.
Sent from my MB855 using Tapatalk
im thinking my phones radio is physically crapping out.. ah.
Perhaps that SBF borks GSM usage? Have you tried one of the very first SBF's that have been put out?
i tried 154_5, and 198_6, not sure if they are 'official', but both have this problem.
do u know of any other ones, or of some factory rom
id try those deblurred custom roms, but they have this wierd bug of not showing signal bars with GSM, aka no matter how good my signal is, the signal bar will always show 0 in those roms
I have been searching for crazy for the past week becuase i have had the same issue.
UMTS 3G radio stopped working, but i have not been able to find any 154 sbf files to flash.
I have to keep GSM mode only, and my battery life is terrible. Battery dies after 7 hours with NO usage. The only thing i have not tried, after flashing all kinds of software, is doing a nandroid backup on another Photon and flashing it on my phone. Will try it right now ad report back.
thats a good idea, especially if the nandroid u take is from a STOCK completely untouched Photon, i just wanna go back to how it was when i first got it
let me know how it works out! so we can upload it
i have the 154 sbf if u wanna try it:
http://www.multiupload.com/FNZKNV0T3G
ps: try flashing a rom from the dev section like that 'Home Base' one, i will try later
THANK YOU! I have been trying like crazy to find the 154 one. Im flashing the nandroid backup, but im doing it over the advanced settings, sine the /boot folder is giving me an error while checking "MD5 sums". It says error while flashing boot image. All other folders restore ok. I´ll post back.
ps. I´ve flashed HomeBase and Alien rom and apparently they do not touch the basebands.
considering that sbf that broke it for me is an official sprint update, it means sprint/motorola messed it up, knowingly or unknowingly, should we make it clear to them (to matt on those moto forums). not many users probably use gsm w sprint/photon so the problem isnt wide spread
i think the one that was working for me was soemthing even before 154, i cant remember if i updated my photon once, 194 is the third OTA right?
Im not very sure, but i work for Sprint, so i´ll check it out tomorrow and let you know.
Anyways, my friend with the Photon, the one i used for a nandroid backup does not have any issues connecting to 3G Gsm networks. It is very odd indeed.
[Edit] My friend´s Photon and mine do not have the same baseband version after the nandroid backup, so i guess it doesnt touch it. We need to figure out a way to get the sbf for the baseband,
whats ur baseband version?
ill check mine
if u work for sprint thats a bonus, dig around tomorrow!
my baseband is n_01.28.05s.fk i am currently doing an OTA update that has been ongoing for a week. im still only at 23%. so there may be a newer version.
iLLa said:
my baseband is n_01.28.05s.fk i am currently doing an OTA update that has been ongoing for a week. im still only at 23%. so there may be a newer version.
Click to expand...
Click to collapse
Don't know if it helps at all, But I'm on CDMA and my baseband version is the same. n_01.28.05s.fk
I'm on GSM/UMTS in Italy and my baseband version is n_01.28.07R with update 45.3.6 and is ok
[Q] [Help][Stock AT&T 2.3.4 Build 4.5.91]No network after *#*#4636#*#* > USA Band
Hi guys! Plz help.
I have AT&T Motorola Atrix 4G. Its SIM Unlocked and Bootloader Unlocked as well.
System version: 4.5.91.MB860.ATT.en.US
Android version: 2.3.4
I am using this mobile phone in India and had no problem at all with 2G and 3G networks.
Today I was going through *#*#4636#*#* > Phone Information > Menu > Select radio band > and selected USA Band accidentally. Thereafter I have no GSM network. I tried manual searching of networks and did a Erase data/factory reset in CWM recovery but had no luck. I tried to restore an earlier backup also but due to MD5 Sum Mismatch error I couldn't do it.
Please help me getting my mobile working again. Is there something which can reset radio frequencies of the phone? Any idea what should I do now?
Thanks you so much for your help.
Hey there!
I had same issue a while ago and didn't have unlocked bootloader back then.
I simply re-flashed stock firmware from this thread and everything worked fine. If you do this then make sure you chose right one (For you first one should be right), If you downgrade to 2.2.x you will hard brick your device. Just keep that in mind.
By the way now I'm using [CM7 ROM][24/12] --> Neutrino ROM 1.4-S <-- [53mb] and there in settings you can choose whatever band you like unlike in stock AT&T firmware from *#*#4636#*#* you can chose only USA Band. There must be other roms what support this feature too.
I'm sure there are other ways to fix this issue but this is from my expierence.
Good luck!
PS I did that in first week when I had Atrix and it was my first android device. I managed to fix it, I'm sure you will fix it too
mm166 said:
Hey there!
I had same issue a while ago and didn't have unlocked bootloader back then.
I simply re-flashed stock firmware from this thread and everything worked fine. If you do this then make sure you chose right one (For you first one should be right), If you downgrade to 2.2.x you will hard brick your device. Just keep that in mind.
By the way now I'm using [CM7 ROM][24/12] --> Neutrino ROM 1.4-S <-- [53mb] and there in settings you can choose whatever band you like unlike in stock AT&T firmware from *#*#4636#*#* you can chose only USA Band. There must be other roms what support this feature too.
I'm sure there are other ways to fix this issue but this is from my expierence.
Good luck!
PS I did that in first week when I had Atrix and it was my first android device. I managed to fix it, I'm sure you will fix it too
Click to expand...
Click to collapse
Hi mm166,
Thank you so much for your reply and I do think a re-flash only can fix my mobile. Since I have Bootloader Unlocked so I think I can't use SBF method to flash stock 2.3.4 and I can only go for fruitcakes. I am now downloading ATT 2.3.4 Build 4.5.91 fruitcake and I hope it will fix my mobile
I am woundering if flashing ATT radio .91 from following link will reset the files responsible for holding network settings and can fix my mobile ... but I am not sure so can't go for it
http://forum.xda-developers.com/showthread.php?t=1163009
Update:
I just flashed "2.3.4 System and Boot NO Webtop (Updated Newest Script)" fruitcake after Clear Data/Cache/Factory Reset but still no network
I think I have lost my mobile just because of accidentally setting to USA Band.
Any help please!!!!!
Well, I'm still newbie on Android devices. I'm not very long with Android device but I'll try give you few advices. Keep in mind that I could be somewhere wrong:
I think new script: [Batch/Script] MFBSR - Moto-Fastboot: Stock Restore could help. Worth trying. Fruitcake didn't restore everything.
I used RSD SBF flash and I think it doesn't matter if bootloader is unlocked or not (maybe someone could confirm that?) if you flash same firmware but that's somewhat risky (better don't try this). But I did that and everything worked great.
Other way to fix network issue could be flashing custom rom. For example this. I added screenshot from settings. Edit: No, I think I'm wrong. That's not right thing.
Solved!!!
Hi mm166, thank you so much for your reply
Before reading your message I did a trick and it worked for me. I just flashed ATT Basband/Radio N_01.77.36P FruitCake through Rom Racer's CWM and after reboot my phone was able to find network as it should be
Since my phone's BL was unlocked so I was not supposed to try SBF flashing to prevent it from hard brick. And, just flashing Stock ROM FruitCake was not resetting its radio settings i guess ... and flashing particularly above mentioned radio files just replaced the older one and once again my Atrix started to breath
I hope this may work for other guys too who are facing same kinda problem of not getting network after accidentally setting the radio to USA Band. But a Full Wipe/Factory Rest/Data/Cash/Dalvik Cache Wipe is needed.
Hi,
First post on XDA so bare with me on this.
Have flashed my TELUS Note 717D with a few different ROM's over the last few days. With the news that Sammy will be pushing out official ICS in the next week or so I am trying to get my Note A$S back to stock including the correct radio file.
This is where I have come unstuck. I have all the correct files but for some reason I can't get my LTE back. Yes it was working prior to my loading new ROM's and also after I went testing. Had the soft bricking issue yesterday & managed to get that resolved but since then no LTE nada.
Loaded the full TELUS recovery (found here http://forum.xda-developers.com/showthread.php?t=1585440 ) and then the TELUS kernel.
Still no LTE. I have the GB & ICS radio files & now can’t get the recover to load any zip files as I get a error at the first screen.
Any help would be greatly appreciated.
Mike
I went thru this yesterday... i
I flashed the ATT stock rom/system from these boards, then downloaded the three part Telus file..when assembled its about 1 Gb...
After flashing ATT, I cleared dalvik, flashed the Telus stock.. Then i did a factory reset, and i was back.
I'm still running a non stock modem file.. But all is functioning.
Sent from my SGH-I717D using XDA
getting LTE now?
Everything is working but the lack of LTE is missing.
I am in downtown Vancouver & out address has a in building LTE system so coverage is not a problem.
Can you confiem that you have LTE? do you have the isp.telus.com apn too?
Mike
still having issues
I can flash the AT&T ROM with no problems using odin. when I reboot into recovery I am getting a error that wont allow me to use the power button and select the reset option.
The power button works because I can press and hold to reboot the phone but the white triangle with ! mark is in the moddle of the screen. With out that I am unable to do the resetting & clearing of the cache.
Any thoughts?
telephonemike said:
I can flash the AT&T ROM with no problems using odin. when I reboot into recovery I am getting a error that wont allow me to use the power button and select the reset option.
The power button works because I can press and hold to reboot the phone but the white triangle with ! mark is in the moddle of the screen. With out that I am unable to do the resetting & clearing of the cache.
Any thoughts?
Click to expand...
Click to collapse
Yeah.. Unfortunately my skillset definitely into the "knows just enough to be dangerous" category..
What 'recovery' is currently in the phone? Stock recovery? A CWM type recovery? I ask because I had an issue once previously where the power button wouldn't let me select items.. but I was able to use one of the four soft buttons on the bottom front of the phone to execute the same command. Once it was the 'home' button.. on my current recovery software it's the search button oddly enough.
What happens when, from the phone dialpad after a normal boot, you key : *#2263# ?
Do you get the Band preference menu?
What's selected? What happens if you pick 4 (LTE) and then 7 (LTE ALL) ?
And have you done a factory reset on the phone after any of these flashes? (I didn't see where you had so I askl)
Lastly -- in the SETTINGS / WIRELESS & NETWORK / MOBILE NETWORKS menu.. do you have "NETWORK MODE" menu item that the stock Canadian i717 device has the AT&T device does not?
I'll add here as a postscript.. it may not matter ... if the update includes an updated radio file.. all this worrying over it may not much matter once the update comes?
knoxster said:
Yeah.. Unfortunately my skillset definitely into the "knows just enough to be dangerous" category..
What 'recovery' is currently in the phone? Stock recovery? A CWM type recovery?
I have CWM v5.5.0.4 installed which works but wont let me installed the radio file. Bombs out with errors.
When I flash the TELUS stock GB Kernel, I get the standard recovery which wont even let me see the radio file.
What happens when, from the phone dialpad after a normal boot, you key : *#2263# ?
I thought this was a At&t thing only? But that said I did try to the number and got a recorded annc saying that is was not a valid number.
Do you get the Band preference menu?
Yes I have the correct options and its set to use all the HSPA types & LTE too.
And have you done a factory reset on the phone after any of these flashes? (I didn't see where you had so I askl)
Yes I did the reset to factory in CWM after the At&t ROM flash and after I loaded the TELUS ROM too. I did had to load a different kernel to allow the CWM recovery but then installed the TELUS stock kernel after.
I'll add here as a postscript.. it may not matter ... if the update includes an updated radio file.. all this worrying over it may not much matter once the update comes?
Click to expand...
Click to collapse
Thanks for all the help so far
Mike
Well, I have the same CWM .. I can't flash any of the supposedly flashable CWM modem files.. errors out part way thru. Weird.
I'm uploading my Telus Stock image that I used to Google drive.. I'll pm you the link once its up.
Sent you the links.
Also -- I managed to get the Bell Radio CWM file loaded on my Telus device from the thread located in this forum. (STOCK BELL thread)
There is now a Rogers stock thread and hopefully they'll have a Telus thread that will have a modem file that loads as well as the Bell one did. I can't imagine the differences are that great.
success
we have LTE!!!
Huge thanks for your help here. Flashing the BELL LTE radio file has now enabled the LTE in my telus note.
A little embarrassing as I work at telus but shhhhhhhhhhhhhhhh.
XDA Dev site is the best for anything Andriod.
telephonemike said:
we have LTE!!!
Huge thanks for your help here. Flashing the BELL LTE radio file has now enabled the LTE in my telus note.
A little embarrassing as I work at telus but shhhhhhhhhhhhhhhh.
XDA Dev site is the best for anything Andriod.
Click to expand...
Click to collapse
Yay!... See? Occasionally the blond leading the blind .. something good can come from it!
Plus I managed to get my modem back to stock as well .. I was using that T769 modem that was tweaked for Note use.. and all the Telus CWM modem files I would try to flash in ...just errored out.
I talk to Rogers and apparently there's the 401 sim that's not lte capable. They told me to go back to the store to get the 403 sim with lte capable, maybe that should help fix the problem. I'll give an update tmr once I get the new sim.
Does anyone know where I can find the Rogers radio or modem file? I found the radio but it says installation aborted when I try to flash CWM. I flash the Rogers modem file and the log shows me a installation success but it's i717M which is Bell, not Rogers. Can anyone give me a proper Rogers working link? also, apparently Radio and Modem is the same thing, it's just people playing with words, or I'm I getting it wrong? Thank you.
andronikal659 said:
I talk to Rogers and apparently there's the 401 sim that's not lte capable. They told me to go back to the store to get the 403 sim with lte capable, maybe that should help fix the problem. I'll give an update tmr once I get the new sim.
Does anyone know where I can find the Rogers radio or modem file? I found the radio but it says installation aborted when I try to flash CWM. I flash the Rogers modem file and the log shows me a installation success but it's i717M which is Bell, not Rogers. Can anyone give me a proper Rogers working link? also, apparently Radio and Modem is the same thing, it's just people playing with words, or I'm I getting it wrong? Thank you.
Click to expand...
Click to collapse
Why do you ask when you have already posted in that thread?
http://forum.xda-developers.com/showthread.php?p=26232608#post26232608
Agoattamer said:
Why do you ask when you have already posted in that thread?
http://forum.xda-developers.com/showthread.php?p=26232608#post26232608
Click to expand...
Click to collapse
sorry. I wasn't sure I was at the right forum. should I delete the post? btw how do I get alert for reply that people made after me instead of bookmarking every page? Thanks.
Here is the link to the Rogers Modem, http://www.mediafire.com/?ol9yzmmjx8uayh5
you can always flash your modem using adb to push the back to the phone just follow this thread
http://forum.xda-developers.com/showthread.php?t=1506212
Thanks guys. I'll stick with the .zip files to flash in CWM for now as I'm not comfortable with adb yet. One missing letter and it can fail to boot or whatever...
This evening I unlocked my phone and upgraded to CM7 stable. However, as soon as CM7 booted, I saw that I had no bars, and was unable to place calls. Also, when I view the IMEI and baseband version, they both say "unknown". I tried CM7 nightly, as well as fruitcake 4.5.141. Additionally, I tried the 37P and 37P att 12dec2011 radio updates, which did not work either. The wifi works fine.
edit: The radios were flashed with CWM (I wasn't getting any signal pre-flash, FWIW). Also, I wasn't able to save APN's when trying to add them.
Is there anything else to try?
andretti_ said:
This evening I unlocked my phone and upgraded to CM7 stable. However, as soon as CM7 booted, I saw that I had no bars, and was unable to place calls. Also, when I view the IMEI and baseband version, they both say "unknown". I tried CM7 nightly, as well as fruitcake 4.5.141. Additionally, I tried the 37P and 37P att 12dec2011 radio updates, which did not work either. The wifi works fine.
edit: The radios were flashed with CWM (I wasn't getting any signal pre-flash, FWIW). Also, I wasn't able to save APN's when trying to add them.
Is there anything else to try?
Click to expand...
Click to collapse
I would look at putting your APN again. If they aren't saving when you've put them in manually, then it's because you aren't putting them in correctly
barry_ said:
I would look at putting your APN again. If they aren't saving when you've put them in manually, then it's because you aren't putting them in correctly
Click to expand...
Click to collapse
I tried this again, no luck.
Just to be sure everything work you can try to flash a known stable CM7 version like Neutrino or TopSmart after a full wipe. Nobody got radio problems on those rom