[Q] HELP PLEASE! Phone doesnt do anything. - XPERIA X10 Q&A, Help & Troubleshooting

I was going to official Sony Ericsson rom with SE pc companion.
First I was on xrecovery and did factory reset then wipe data cache etc.. battery.. etc.
Then to pc companion and normally started to patching. But when it started to patching phone, cord went off and now it cant patch anymore.
When trying to boot phone. It shows fast sony ericsson name and then Triangle with ! and phone next to it.
How to make phone work?! :,(

ramhead said:
I was going to official Sony Ericsson rom with SE pc companion.
First I was on xrecovery and did factory reset then wipe data cache etc.. battery.. etc.
Then to pc companion and normally started to patching. But when it started to patching phone, cord went off and now it cant patch anymore.
When trying to boot phone. It shows fast sony ericsson name and then Triangle with ! and phone next to it.
How to make phone work?! :,(
Click to expand...
Click to collapse
Did you try flashing back to stock using the flash tool?
Also did you try searching the forum?
There are about +200000000000000000 of these threads here alone.

Related

and then the noob bricked his x10

Hello All,
I just bricked my x10, and have no idea whats going on, other than knowing that the x10 is bricked! So this is what happened...
I backed everything with titanium backup, and then proceed to do my JIT and Cleaner in shell root. I first shell root then ran the JIT_enabler v2, then after that I ran the junk_cleanup. When the junk cleanup finishes, I ddint like how it was set up and couldnt figure out how to change it back, so I did a full system backup from titanium. After the backup it was still no good, I then proceed to do a factory reset in the privacy tab in system settings. When I came back to my phone after the factory reset, it erased everything.... my screen was blanked and I couldnt do anything. I restarted the phone, and the phone was stuck on the Sony Ericsson logo. I couldnt even turn off my x10. I restarted one more time by taking the battery out, but it is still stuck at the Sony Ericsson Logo... what should I do? is my phone done for? i only had it for less than a week =[
please help! thanks!
You'll need to repair your phone, using pc companion. At update it'll say up to date, update it anyway and you'll start from scratch.
Sent from my X10i using XDA App
but the problem for using PC companion is that I cannot even connect my phone with PC companion because I cannot mount my memory card. Its stuck at the SE logo sign, and when I plug in the usb cable, it tells me to drag down the menu and mount the memory card.... and I cannot do that because my main screen is still stuck on SE logo... any ideas? Thanks!
You do not need to mount your sd card for pc companion or seus to work. Load pc companion, take the battery out of your phone for 30 seconds. Put the battery bck in the phone and attach thhe usb cable. Do not plug the other end in to your pc yet. Start the update on pc companion and it should ask you to attach the phone in flash mode. When it does that hold the back button on your phone down and while still holding itdown, plug the usb cable in to your pc. Follow the instructions and it should then be back to normal
projectseahorse said:
Hello All,
I just bricked my x10, and have no idea whats going on, other than knowing that the x10 is bricked! So this is what happened...
I backed everything with titanium backup, and then proceed to do my JIT and Cleaner in shell root. I first shell root then ran the JIT_enabler v2, then after that I ran the junk_cleanup. When the junk cleanup finishes, I ddint like how it was set up and couldnt figure out how to change it back, so I did a full system backup from titanium. After the backup it was still no good, I then proceed to do a factory reset in the privacy tab in system settings. When I came back to my phone after the factory reset, it erased everything.... my screen was blanked and I couldnt do anything. I restarted the phone, and the phone was stuck on the Sony Ericsson logo. I couldnt even turn off my x10. I restarted one more time by taking the battery out, but it is still stuck at the Sony Ericsson Logo... what should I do? is my phone done for? i only had it for less than a week =[
please help! thanks!
Click to expand...
Click to collapse
Right my friend, don't worry. As long as you can get to a Sony Ericsson logo it is not bricked!
By getting to the Sony Ericsson logo it means that Flash mode is still available.
Have you changed your carrier code on the phone? If so use the firmware for that code, if you are not sure just ask again what we mean
Secondly get the Flash tool, stick in the firmware, boot into flash mode and you should be set my friend.
Just make sure its the right firmware for your phone
If you need any more help just ask
Z3X said:
Right my friend, don't worry. As long as you can get to a Sony Ericsson logo it is not bricked!
By getting to the Sony Ericsson logo it means that Flash mode is still available.
Have you changed your carrier code on the phone? If so use the firmware for that code, if you are not sure just ask again what we mean
Secondly get the Flash tool, stick in the firmware, boot into flash mode and you should be set my friend.
Just make sure its the right firmware for your phone
If you need any more help just ask
Click to expand...
Click to collapse
Whats the flash tool, i think i bricked too. Thanks my friend.
succeed, thank you guys so much for the help!

URGENT: x10 doesn't work anymore

I am sorry to disturb you but I have a big problem with my x10.
I explain: I was on xRecovery and inconveniently clicked on " system format" I had not realized it at the beginning, so then I clicked on "reboot" then my x10 does not work, it stays on the "Sony Ericsson" screen at boot.. and I can't have any access to xRecovery with the back button.
I do not know what I can do for fix my error...
Please help me
ps: I use the last froyo beta 2 of zdzihu
Reflash with seus.
THANK YOU SO MUCH!!!!!!!
You save my phone =)
I have a same problem.
I turn out battery and wait one min,than turn back (phone is off yet)
Then put cable in PC
than press the back button and turn the usb to phone.
Keep pressed back button and sonyericcson logo is appeir. (lamp is green)
If I go to keep the back button when SE logo show, than show battery icon to charge on the screen (lamp is orange)
If I stop to hold the back button when SE logo show, then moving into classical ignition and stop asking me the network key sim ...
I done know what is a network sim...
I note that my phone worked just fine on version 1.6 and am no network key is not looking ... All this happened when it decreased the Nordic flash 2.1 ..
When I try the SEUS to do a restore says it is not possible to throw an error ...
The mods x10i
Firmware - 2.1 update1
Baseband - 2.0.46
Kernerl 2.6.29 SEMCUser @ SEMCHost # 1
Build 2.0.A.0.504
Can I go back to version 1.6 or put some other firmware, if we will be doing.
Now I use phone only on mp3
heeeeeeeeeeeeeeeeeeeeeelp
XperiaX10iUser said:
Reflash with seus.
Click to expand...
Click to collapse
itdoesn't work for me plz help
Just flash with FlashTool a clean full firmware, its very easy
http://forum.xda-developers.com/showthread.php?t=920746
Greettings
I had the same problem with xRecovery.
before I put the beta 2, I have made a backup with xRecovery to save my 2.1 [Eminence v1.2]
then I stucked with SE white logo, I pulled the battery out, rebooted and went back to xRecovery..
so If you didn't made any backup, use Flash Tool or reflash.. same thing, same result
Alejandrissimo said:
Just flash with FlashTool a clean full firmware, its very easy
http://forum.xda-developers.com/showthread.php?t=920746
Greettings
Click to expand...
Click to collapse
That doesse nt work for me. The phone cannot go in to the flash mode...
I'm dead, techyyy, plz help?
Downloaded flash tool and cannot work, just the logo there and i can't do anything, not mount it into flash mode....BOOT LOOP!!!
Stuff xRecovery, Crap my phone! Not gonna use it again!
Help!!
SEUS
Just download the Sony Ericsson Update Service - SEUS - Run it - follow the prompts - force a system restore - it will work.
http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/updateservice/xperiax10?cc=gb&lc=en
Hold the back key while putting in the battery, cable already connected and SEUS running - your looking at the bootloader saying - no firmware - so load one onto it and your good!
Thanks man, its all working
Thanks
Aussies are awesome
finally fixed
btw im melbourian too
please help me
i was updating my x10 via pc companion and then i accidentally pull off the cable and now my x10 doesnt work anymore.
is my x10 bricked already? how can i fix this?
THANKS!
You can use Update Service to fix it
you need to flash your phone,i had the same problem and was worried my phone was dead,it should work,let me know if you have trouble
ice_pick88 said:
please help me
i was updating my x10 via pc companion and then i accidentally pull off the cable and now my x10 doesnt work anymore.
is my x10 bricked already? how can i fix this?
THANKS!
Click to expand...
Click to collapse
The X10 is impossible to brick, that is about the only good thing with the locked bootloader that SE uses.
You should be able to resolve your problem by starting PC companion agian, and follow the instructions as you did the first time (when you pulled the cable). When inserting the USB while holding the back-key down the phone enters flash mode, this flash mode does not get overwritten when flashing the android OS, so even if the OS is corrupted the flashmode still works, and can be used to rewrite a fresh copy of android to your phone.
Its an easy fix,flash the phone on flash tool
Sent from my X10i using XDA App
Use flash tool on PC not xrecovery
Sent from my X10i using XDA App

[Q] Infinite Boot

Hi every one
I'm a newbie on this forum and I have a problem with my xperia x10.
I explain, I have installed a rom on it, it worked very well but i tried on other one and the install aborted.
After this, i reboot my phone and since I am in a infinite boot loop.
The phone vibrate, the screen switch on, the sony ericsson logo appears and after that the phone reboot.
I can' access to the xrecovery menu, i tried the flash mode but it didn't work. I tried also to connect the phone to my PC but it's the same (I can't access to my phone with my PC)
I searched on the forum and on the web, I tried things but it didn't work too...
Is it brick? :s Do you have any idea of something to do.
Sorry for my english, I'm french
weakos said:
Hi every one
I'm a newbie on this forum and I have a problem with my xperia x10.
I explain, I have installed a rom on it, it worked very well but i tried on other one and the install aborted.
After this, i reboot my phone and since I am in a infinite boot loop.
The phone vibrate, the screen switch on, the sony ericsson logo appears and after that the phone reboot.
I can' access to the xrecovery menu, i tried the flash mode but it didn't work. I tried also to connect the phone to my PC but it's the same (I can't access to my phone with my PC)
I searched on the forum and on the web, I tried things but it didn't work too...
Is it brick? :s Do you have any idea of something to do.
Sorry for my english, I'm french
Click to expand...
Click to collapse
Use pc companion to repair phone.
Sent from my X10i using XDA Premium App
I tried to update my phone (2.3) with PC companion, it worked well until the end but i had an error message, I tried a second time but the same, and now I have a warning logo immediately after the sony ericsson logo :
When I connect my phone to my computer, it boots and I have the same logo, and it reboots, I tried to press the return button and it didn't work...
And I can't access to the repair function of PC Companion.
I hope you can help me...
Just download firmware (.ftf) file and flash it with flashtool.
Just go to xperia x10 android development forum and search for flashtool.
Sent from my X10i using XDA App
Thanks ! I will try
aimcr7 said:
Just download firmware (.ftf) file and flash it with flashtool.
Just go to xperia x10 android development forum and search for flashtool.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Thats exactly what i did too everytime i brick my Xrecovery.
SEUS..
I tried all those softwares (PC Companion, SEUS, FlashTool) and nothing worked...
With SEUS and FlashTool, It seems to work, but in the end, I have an error message. With FlashTool the installation aborted and with SEUS a failure.
Could it be the battery? (I can't charge my phone...)
Try and diconnect the battery for a few minutes and plug the charger in again and leave it for a few hours.
If you take the back cover off there is a small rubber cover that can be carefully takem loose and beneath that cover you see a white plug and that is the batteryconnection to the phone.
I´ve bricked mine so many times now that I just leave that rubber cover off...

[Q] XPERIA X10 Booting problem

hey guys while I was falshing my rom of xperia x10 via flashing tool follwed the procedures given after it completed and asked me to unplug the device and switch it on... now phone dos not boots and has got stuckd at sony ericsson logo...its not moving ahead... not even booting.. I ve tried to connect again in flashing tool flash mode still its not working .. phone automatically gets disconnected.. also wen I put the battery inside it turns on to sony ericsson logo automatically even if I dnt use power on button.. help me out... plz plz plz
Please give some info.
Have you unlocked bootloader?
What rom are you trying to flash?
When you start to flash, flashtool asks for disconnect the phone, power off and connect again with BACK button pressed. Then the process continues...
After flashing kernel you must enter to recovery and install zip file from sd-card.
Regards.
I was tryng to flash rom 3.0.1.G.0.75 on Gingerbread 2.3.3 and ya I was supposed to enter downloading mode but before I do dat phone has stuckd on... gets on wid sony ericsson logo evn if I dnt swtch on...help me..
Please, can you provide the followed procedure ?
Maybe this thread can help you http://forum.xda-developers.com/showthread.php?t=1226826&highlight=lock+bootloader+again
Which log do you use, PC Companion, SEUS, Flashtool...?
Do you have a CWM recovery ?
If you don't know how (or are afraid) to use flashtool...
You can do that :
1/ Launch SEUS (Sony Ericsson Update Service) HERE
or PC Compagnion HERE
2/ Turn off your phone, remove the battery over 5 seconds, replace it.
3/ Hold the right button (the one with the arrow) and plug your phone on your computer with usb (It calls flashmode)
4/ The green led must be light on and SEUS or PCC recognize your phone...
5/ Now you just have to follow the instructions to install a stock rom.
If it doesn't help, you can use flashtool... A great tuto HERE Thanx to Crowds
With it you can unlocked the bootloader and install a new kernel with CWM recovery inside...
Install a new rom, root your phone... ans so more stuffs...
I hope it helps...
I've been told to install x recovery on the computer,take out battery n unplug the phone .Then have flash base band on computer(it will then show that its trying to download)connect phone in flash mode.to do this hold down the bottom right hand button(the back arrow)on your phone then put battery back in(KEEP HOLDING back arrow button)and plug the cable back into your phone.I hope this helps.GOOD LUCK BUDDY!
I am having the same problem with my Xperia Neo, i tried to connect my phone to PC Companion and it says. "PC Companion was unable to connect to your phone, please disconnect and connect again"
My phone is just sitting there with the words "Sony Ericsson" flashing on and off, I fear that my phone is bricked but im not 100% sure, if there is anything that can be done please help!!!
Can you explain more what you're doing ?
Do you did that :
Launch Pc Compagnion
Plug the phone
Mount the sd card
EDIT : Sorry i read too fast your post... Your phone can't turn on you're stuck on the bootlogo of SONY ERICSSON...
Do you plug the phone in flashmode ?
nicks2587 said:
hey guys while I was falshing my rom of xperia x10 via flashing tool follwed the procedures given after it completed and asked me to unplug the device and switch it on... now phone dos not boots and has got stuckd at sony ericsson logo...its not moving ahead... not even booting.. I ve tried to connect again in flashing tool flash mode still its not working .. phone automatically gets disconnected.. also wen I put the battery inside it turns on to sony ericsson logo automatically even if I dnt use power on button.. help me out... plz plz plz
Click to expand...
Click to collapse
Some of the custom roms are flashed with xrecovery or cwm,
Now what kind of rom did you want to flash?
Maybe you went wrong that in procedures said "flash the rom".
Put out the battery then put in and turn your device on then restore your previous rom then try again and install(flash) new rom.
Good luck.
Sent from my X10 using XDA

Sony Xperia L c2105 Stock on Sony Logo and Flashtool Wont Recognize my device

i tried to install twrp and flash custom rom, followed the instructions like wipe data, cache, system but since it takes almost an hour and no progress, i restarted it.i disconnected the device and now it was stock in sony logo..cant even go to recovery.flash tool cant recognixe my device.i already remove the battery a couple of times and when i connect to pc or try to charge it starts on its own and still stuck on logo.it would be a great help if there is anyway to help me with this.im trying to flash the stock rom but i dont know where to start.i cant be able to turn on usb debugging bcoz i was stuck in sony logo

Categories

Resources