I've had a look around and this issue has been brought up a few times, but then just brushed over without a concrete answer.
I have a few MKVs that I want to play on my phone, but that don't have sound.
I've tried with the stock player and with Mplayer.
I've spent the last few hours googling how to convert MKVs to AVIs and whatnot and tried a few times all unsuccessful.
I don't really want to covert them anyway, they all work fine, just not on the phone.
The video plays smoothly, and subtitles show up if it has them, just no sound.
How can I fix this?
OGG Vorbis audio track? Try Moboplayer. I just found out it'll read and play it, subs included.
That's what I'm using, Moboplayer and the stock player.
No sound from either.
I just noticed Moboplayer has a bunc of codecs in the market, do I need to install one of them? Which one?
well i have sound with stock player and mkv.... what sound is it ? DTS, DD ?
i use Vplayer, works fine for me. shows picture sound and subs
SuperTheMando said:
I've had a look around and this issue has been brought up a few times, but then just brushed over without a concrete answer.
I have a few MKVs that I want to play on my phone, but that don't have sound.
I've tried with the stock player and with Mplayer.
I've spent the last few hours googling how to convert MKVs to AVIs and whatnot and tried a few times all unsuccessful.
I don't really want to covert them anyway, they all work fine, just not on the phone.
The video plays smoothly, and subtitles show up if it has them, just no sound.
How can I fix this?
Click to expand...
Click to collapse
Most mkv's contain an ac3 soundtrack.
The SII doesn't like that.
I convert mkv's to mp4 now with avidemux.
With these settings:
- video: copy
- audio: AAC
Works like a charm!
Edit: it's a 'cheap' conversion, it goes very fast because only the audio track is converted.
SuperTheMando said:
I just noticed Moboplayer has a bunc of codecs in the market, do I need to install one of them? Which one?
Click to expand...
Click to collapse
The Mobo Player app should have an option to point you to the correct codec.
If you don't install the codec then it will only play the same formats as the stock video player.
I use mVideoPlayer, works fine for all of mine.
But I think DicePlayer has the best support for audio codecs, though it's only free for a trial period and doesn't support embedded subs (AFAIK).
I have these installed permanently as one of them usually does the job, I usually try stock first followed by mobo, then rock with Act1 and QQ as backups.
Dice is probably the best but isnt free.
Dice
mobo
rockplayer
act1
qq player
I have tried pretty much all other players, honestly dont waste your time or money on any of the others.
EDIT - sorry I forgot, since moving to this Phone I hace scrapped qq for everything and rock for HD stuff as it doesnt seem to decode as well as stock or mobo, always try stock first.
On my GS2 I do not see any option Mobo Player to point me to the correct codec, any clue?
MyrddinLXXIIX said:
Most mkv's contain an ac3 soundtrack.
The SII doesn't like that.
I convert mkv's to mp4 now with avidemux.
With these settings:
- video: copy
- audio: AAC
Works like a charm!
Edit: it's a 'cheap' conversion, it goes very fast because only the audio track is converted.
Click to expand...
Click to collapse
I like this idea best, it means I can play through the stock player, so I don't need to have unnecessary apps. I do like the stock player.
Is there any quality loss when doing this?
Will embedded subtitles carry over?
Edit: I just tried this, and the file it pushed out had a really low framerate. I could see jaggeddyness in frames.
Mobo is good. it's free.
Mobo's ffmpeg codec support almost all codecs.
but ffmpeg sw codec use CPU more than HW codec.
when playing 720p H.264+DTS mkv. mobo ( or rock ... ) sw codec use almost 100% CPU power.
Stock Player and DicePlayer use only 20-40% of CPU power. ( Audio codec use cpu.. )
SW codec players use lossy color convert and resize routine.
dithering or color loss will occur. ( you can see when playing dark scene )
HW Codec's Pros.
1. Performance ( Can Play 1080p )
2. Battery
3. image quality
Cons.
1. Codec compatibility ( but SGS2's HW codec is AWESOME. )
2. not supported codecs ( RMVB, VP6/7.. )
** dice player 1.1.2 add mkv embedded subs.
SuperTheMando said:
I like this idea best, it means I can play through the stock player, so I don't need to have unnecessary apps. I do like the stock player.
Is there any quality loss when doing this?
Will embedded subtitles carry over?
Edit: I just tried this, and the file it pushed out had a really low framerate. I could see jaggeddyness in frames.
Click to expand...
Click to collapse
Generally I get good results, but haven't tried it with movies yet.
Only 720p series with 25fps, no subtitles.
Back at my desktop tonight I will try a movie with subs.
The file I tried was a movie, 720p, no subs.
I don't know what it's framerate was, but it's pretty damn high. It looks seamless.
When I tried loading it with the app, I got this error. Maybe it is actually important and not to be overlooked?
I answered no.
SuperTheMando said:
The file I tried was a movie, 720p, no subs.
I don't know what it's framerate was, but it's pretty damn high. It looks seamless.
When I tried loading it with the app, I got this error. Maybe it is actually important and not to be overlooked?
I answered no.
Click to expand...
Click to collapse
I answered no every time without much problems. Forwarding in the stock player seems a little slow sometimes but that might be normal.
25 is pretty standard for series I believe.
Converting gives the advantage of hardware acceleration and I do not want to loose that.
MyrddinLXXIIX said:
I answered no every time without much problems. Forwarding in the stock player seems a little slow sometimes but that might be normal.
25 is pretty standard for series I believe.
Converting gives the advantage of hardware acceleration and I do not want to loose that.
Click to expand...
Click to collapse
Diceplayer give you hw acceleration without converting.
As promised...
Promised a follow-up with an mkv with subtitles.
I must admit I didn't get it to work yet.
Unclear to me if it is even possible, I found some info that the stock player will accept separate subtitles like .srt but I have not confirmed that yet.
Ran across another problem that put me off track.
Tried a conversion to mp4 with a movie but didn't think about the size restrictions.
Could not connect in Storage mode for some reason, so I tried to use SD-cards / usb-otg. No succes with 4 Gig+ files yet ~ using windows which has exFAT and NTFS, neither is working.
Possibly there is a filesystem that will do the job on Win7 and Android 2.3.3?
My research tells me that exFAT is not really available for Android, too tired atm to look for alternatives from the Win side.
Like USB-OTG very much, would like a way to get 4G+ files to my SII that way!
As I said, got sidetracked seriously ~ apologies if I got too far offtopic.
Related
I have a problem watching videos on my SGS2. When I put a .mkv video on the SD card and watch it I cant fast forward the video. If I reboot the phone and try to open the .mkv movie it wont work. What is the problem?
Specs for the file? Same for all mkvs? Does it work on other, non-stock players?
B3311 said:
Specs for the file? Same for all mkvs? Does it work on other, non-stock players?
Click to expand...
Click to collapse
It works on few players. But not all. But I still cant fast forward and when i reboot the phone the movie wont work.
Specs? How do you mean? It's a mkv movie if its what youre asking.
Resoluti0n, framerate, audio etc.
Reason I ask is that all my own mkvs play flawlessly but I ripped them from DVD and encoded them myself.
A friend gave me aTV series on mkv, probably from a, er, doubtful source, and those files stutter like buggery on stock, play fine on mobo.
Badly or incorectly encoded media can exibit such behaviour .
B3311 said:
Resoluti0n, framerate, audio etc.
Reason I ask is that all my own mkvs play flawlessly but I ripped them from DVD and encoded them myself.
A friend gave me aTV series on mkv, probably from a, er, doubtful source, and those files stutter like buggery on stock, play fine on mobo.
Click to expand...
Click to collapse
I have no idea how to get the resolution, framerate of the video. But I know the audio of the .mkv.
Maybe I should try to convert it and see if it works. But I dont know if it will be 1080p if i convert it. Will try and see.
Also try these players,
http://forum.xda-developers.com/showthread.php?t=1217776&highlight=Best+Player
Regards.
I also had a Tv series with mkvs that would not FF (also on GT P1000), but if i ran them through mkvtoolnix everything was fine again. So it's not a codec problem but a faulty container. All you have to do is to disable header compression on all streams in mkvtoolnix. It's very fast ... less than 20 sec/ GB.
ibahungrig said:
I have no idea how to get the resolution, framerate of the video. But I know the audio of the .mkv.
Maybe I should try to convert it and see if it works. But I dont know if it will be 1080p if i convert it. Will try and see.
Click to expand...
Click to collapse
Gspot will give you all the info.
Convert anyway - worth a try, and 1080 is a waste of space and CPU on the SGS2.
mdalacu said:
I also had a Tv series with mkvs that would not FF (also on GT P1000), but if i ran them through mkvtoolnix everything was fine again. So it's not a codec problem but a faulty container. All you have to do is to disable header compression on all streams in mkvtoolnix. It's very fast ... less than 20 sec/ GB.
Click to expand...
Click to collapse
Thanks for your help. I downloaded mkvtoolnix but I cant find an option how to disable header compression.
Extra options (Tab in the vertical middle of the form) - Compression - None.
Do it for video, audio and subtitle stream.
You can extract subtitle and watch it with Mobo player (HW +SW decoding) otherwise embedded subtitles only works with mVideoPlayer (only HW decoding).
mdalacu said:
Extra options (Tab in the vertical middle of the form) - Compression - None.
Do it for video, audio and subtitle stream.
You can extract subtitle and watch it with Mobo player (HW +SW decoding) otherwise embedded subtitles only works with mVideoPlayer (only HW decoding).
Click to expand...
Click to collapse
I tried that out aswell but didnt work. Can it be because the file is over 4gb which is the max capacity SGS2 can have? The file is 4.9gb. Is there any way I can divide it into two parts or something to get around this problem?
I divided the file with the program you told me about. Thanks for your help all. The problem was the file, it was over 4 gb.
http://forum.xda-developers.com/showthread.php?t=1244464
Hi, I just tried to play a ripped copy of a 720p bluray video, and realized that this laggs pretty bad when trying to do this. I am currious if there would be a way to play 720p on these, I know archos can. I have tried several apps, all of them lagging, even tried overclocking. Google don't turn up much.
Maybe it's because your using a blueray video?
Use matroska format.
________________________________
~ Sent from iOS/Android device
iJimaniac said:
Hi, I just tried to play a ripped copy of a 720p bluray video, and realized that this laggs pretty bad when trying to do this. I am currious if there would be a way to play 720p on these, I know archos can. I have tried several apps, all of them lagging, even tried overclocking. Google don't turn up much.
Click to expand...
Click to collapse
I have lags too! I've tried every player.
It seems hardware acceleration doesn't work on mkv files.
tapioco2000 said:
I have lags too! I've tried every player.
It seems hardware acceleration doesn't work on mkv files.
Click to expand...
Click to collapse
I actually am using an mp4 file but I think we have the same general problem.
If you are rooted, you can try editing /system/build.prop. Open it with text editor in root explorer and add "video.accelerate.hw=1" without quotes to it (make sure you back up the original file first!). That line is supposed to let the GPU render videos. Reboot your device, and see if video playback is any better. Also, there are many other build.prop tweaks that you can use found here:
http://www.freeyourandroid.com/guide/build-prop-modifications
and here:
http://forum.xda-developers.com/showthread.php?t=1227269
I use MX Player, easy to see whether GPU acceleration is working in that program. It has a lot of other nice features too, recommended in general.
The Wifi-5 plays the 720p trailer files I've tried without lag. Sometimes a few home-made files may seem to lag, but this is more likely to be due to incompatibility/ non-standard compression codecs than a lack of power. It doesn't seem to have problems with high-profile files or high bitrates in general. This is under Froyo, by the way.
onurdndar said:
I use MX Player, easy to see whether GPU acceleration is working in that program. It has a lot of other nice features too, recommended in general.
The Wifi-5 plays the 720p trailer files I've tried without lag. Sometimes a few home-made files may seem to lag, but this is more likely to be due to incompatibility/ non-standard compression codecs than a lack of power. It doesn't seem to have problems with high-profile files or high bitrates in general. This is under Froyo, by the way.
Click to expand...
Click to collapse
Let's try the famous mkv test file "Killa sampla" posted on XBMC forum.
MX fails! It says "hardware acceleration not supported"! And other players too!
tapioco2000 said:
Let's try the famous mkv test file "Killa sampla" posted on XBMC forum.
MX fails! It says "hardware acceleration not supported"! And other players too!
Click to expand...
Click to collapse
Which version of Killa Sample? Hopefully not the 1080p, that's obviously not supported. Even if it's a 720p version, it's way overkill.
klin1344 said:
If you are rooted, you can try editing /system/build.prop. Open it with text editor in root explorer and add "video.accelerate.hw=1" without quotes to it (make sure you back up the original file first!). That line is supposed to let the GPU render videos. Reboot your device, and see if video playback is any better. Also, there are many other build.prop tweaks that you can use found here:
http://www.freeyourandroid.com/guide/build-prop-modifications
and here:
http://forum.xda-developers.com/showthread.php?t=1227269
Click to expand...
Click to collapse
Thanks for the tip, I tried it, then used Mx video player with hw rendering, but it still lags. My next mission is converting to 480p, witch is the actual resolution of this screen.
Two possibilities are either:
1) Resolution is too high or
2) Device can handle the resolution but not the H.264 profile used for the video
Samsung Galaxy Player 5 won't play m4v files
I have several files loaded onto my Droid 3 that play fine. But, when I load them onto my Samsung Galaxy Player 5, I get the error message: "Cannot play video, sorry, this video cannot be played". What format do I need to use for the Samsung Galaxy Player 5 to get the videos to play? I have tried MP4, WMV, M4V, etc...
iJimaniac said:
Hi, I just tried to play a ripped copy of a 720p bluray video, and realized that this laggs pretty bad when trying to do this. I am currious if there would be a way to play 720p on these, I know archos can. I have tried several apps, all of them lagging, even tried overclocking. Google don't turn up much.
Click to expand...
Click to collapse
my 4.0 plays 720p and 1080p without lags, the formats I use are wmv avi and mp4. Maybe its audio coding my player can't play AC3
Sent from my GT-I9000 using XDA
no AC3 audio is perfectly fine, its definitely the container. google Handbrake and DL it, its the greatest encoder I've ever used. Sure there is a slight learning curve but once you know how to use it your 720p videos will play flawlessly on your preferred video app (imo mx player is the best one out there)
Hey guys,
Loving my Prime but I'm finding the video playback hit and miss to be honest.
I'm finding them all very buggy and most of them kick me out of the video randomly even without anything else running.
All of the below run perfectly on my friends Galaxy SII so it may be ICS?
I want to play back XVIDs and MKVs with subtitle support.
Below are the players I've tried and their results:
Google Videos:
Reads MicroSD
Plays MKV (some without sound) but NOT XVID
Doesn't support subtitles
STABLE
Rockplayer
Plays XVID & MKV
No subtitle support
UNSTABLE
MX Video Player Pro
Plays XVID & MKV
Subtitle support
UNSTABLE
MoboPlayer
Plays XVID & MKV
No subtitle support
UNSTABLE
How have you guys been finding video playback on this guy?
I play on using this tablet for a lot of video consumption so I'd love to get this sorted.
Thanks for the help!
Dice Player has been gold for me, playing everything I've thrown at it (720p mkv, avi, mpeg). I haven't tried anything with subtitles, but it supposedly supports them.
There's currently only the ad-supported version available, but the ads are small and don't show up at all should you use microHDMI to display the video on an external screen.
MX video player has worked great for me. Try different encoders if something in your video isn't working well (ie, HW, SW, etc). Also, try re-installing if you think ICS broke it.
Diceplayer is the best I think. Plays everything just fine and have good setting for subtitle.
I watch my videos most with subtitle and i haven't had any problems. Easy to change size and if you long press on the subtitle text you can move it up and down. Also have easy access to change the subtitle sync. And the add only shows when the controls are showing. here You don't see the add when the video plays and the controls and status bar hides.
And if some videos don't play properly i say that the problem often is the video file that is encoded strange.
MX Pro works great for me even on my high profile x264 encodes. SW decoder works better than HW decoder (go figure right? I would have thought the opposite) with fast mode disabled.
Edit: I have to agree with Andreas, if you're having playback issues it's likely the video not the player. Encoding is a subtle art, not everyone gets it right. Get your vids from well known sources like Thora.
Thanks a million guys.
MX Player Pro doesn't support HW decoding on the Transformer Prime. At least on mine it doesn't. Dunno why. And its really flakey. It keep crashing out on any file I try to play (XVID, MP4, MKV)
DicePlayer is WIN so far! Thanks for the recommend!
It's playing everything with subtitles too.
The only thing I don't like about it is the background 'behind' the movie is a gradient from black at the top to grey at the bottom so on some movies you've got a grey at the bottom of the picture instead of it playing on a full black background.
Unless you guys know how I can change that I'll be using DicePlayer until something better comes along.
HURRY UP VLC!
HW decoding technically works on my Prime, but SW decoding performs better. Is the option not even available for you in settings? Free or Pro? Also, no VLC...ever. Just no.
OK!
Very happy to report that after purchasing the full version of MX Player Pro EVERYTHING WORKS GREAT!!!!
Many thanks again guys!
XDA ROCKS!
lediva said:
Dice Player has been gold for me, playing everything I've thrown at it (720p mkv, avi, mpeg). I haven't tried anything with subtitles, but it supposedly supports them.
There's currently only the ad-supported version available, but the ads are small and don't show up at all should you use microHDMI to display the video on an external screen.
Click to expand...
Click to collapse
Another vote for DICE. Hopefully they can get their payment issues sorted out.
Dice is the best IMO. I run huge 1080p files and only Dice can handle it without a hiccup. MX Player Pro has a skip every once and a while. Not that big but Dice doesn't do it so it wins.
VitalPlayer Pro seems to work well. It can't navigate to the MicroSD card though.
BSPlayer has worked well for me. I use the lite version and all is good. It handles all video/audio as well has HW decoding for supported video types.
My vote goes to Dice player. It is the only one that I have tested that doesn't have audio lag when I am using bluetooth headphones. Also it plays everything I can throw at it.
And don't forget to instal mx player codec pack for armv7.. In market too.
MX Player will prompt you if it needs a codec pack installed. In the Primes case it does not, it is good to go.
Since I use and like DVD Catalyst 4 to convert my DVD's to video I also use their video app called Movie Gallery. Not sure if it plays all codecs but it sure works great with my converted DVD's
I used to use VPlayer when it was beta/free but now I use vlc for android http://cvpcs.org/blog/2011-09-18/videolan_for_android_pre-alpha
I get my TFP tomorrow but it works on my phone and the OG transformer according to the post so it should work on the prime. NONeon btw at least the OG was NONeon
I sure hope that it does.
video and sound on tv, subtitle on prime
I've tried Dice- and MX player and with both programs I get sound and video on my tv playing avi but the subs will be displayed only on the Prime. Has anyone the same problem or does someone a solution?
Does MXPlayer require an internet connection for the key verification? I saw some reviews that stated it did. Obviously on a wifi only device i may be without internet... Anyone have trouble with this?
Schutter said:
I've tried Dice- and MX player and with both programs I get sound and video on my tv playing avi but the subs will be displayed only on the Prime. Has anyone the same problem or does someone a solution?
Click to expand...
Click to collapse
You have to use software decoding if you want soft subs, the hardware decoder on the prime doesn't handle them when outputting.
I copied a couple of 720p videos to my Galaxy Tab 10.1. The native video player says it can't play them. I tried a couple of other video players that generally do a good job and were able to play them using software decoding, but one had a really poor frame rate, the other ran in super slow motion.
Seems like the hardware isn't up to software decoding HD video and hardware decoding is finicky about formats?
These movies were both mpeg4 video, aac audio in a mp4 container.
When I copied them over it offered to convert them for me, but if I let it do so it seems to be very slow and would take over 9 hours. I'm sure I could do better using handbrake or something similar to recode as necessary.
But can someone summarize the requirements to get hardware accelerated decoding (or sufficiently fast software decoding) of 720p/1080p video?
Thanks.
Did you try Diceplayer and BS Player? Both are available from the Market for free (ad supported) and played all my 720p videos (most were .mkv).
I'd suggest giving them a try (you also have to download the tegra2 plugins for both players).
As for 1080p its a far cry - depending on the specific encoding options it might work fine or be really crappy. Best bet would be to re-encode the 1080p videos you want to watch on your tab, but 720p is usually manageable (and more then enough for our tab, since it's basically the resolution of our screen)
nightmarebadger said:
Did you try Diceplayer and BS Player? Both are available from the Market for free (ad supported) and played all my 720p videos (most were .mkv).
I'd suggest giving them a try (you also have to download the tegra2 plugins for both players).
As for 1080p its a far cry - depending on the specific encoding options it might work fine or be really crappy. Best bet would be to re-encode the 1080p videos you want to watch on your tab, but 720p is usually manageable (and more then enough for our tab, since it's basically the resolution of our screen)
Click to expand...
Click to collapse
I like how they say the tab can handle 1080p video's, But forgot to mention "it would lag like ****" Youtube apparently get's played in 720p HD whereas getting a 1080p video to play is far from possible, perhaps ICS would make it possible, for now the stock decoders are horrible, HORRIBLE. Use the stock Movie Player/Video and it's like watching Lego or Minecraft graphics. Dice Player Ad is the best out there, and the only video player I use.
Just don't forget to download the Tegra2 plugin with it (Free ofcourse).
Thanks guys. I'll give Dice Player a try and see if it does a better job. I don't usually use 1080p so as long as it can decode 720p smoothly I'd be happy.
From what I've read, it seems that Tegra 2 can't decode Mpeg4 High Profile, which probably explains why the videos I tried don't work well. I'll also try recoding them with standard profile and see if those work. But apparently, most HD video (including commercially downloaded video) is high profile encoded so the fact that the Tegra 2 can't decode those is rather pathetic. I don't want to have to code/recode everything specifically for the tablet so that's rather disappointing...
OK, gave those a try:
BS Player: Slow Motion...
Dice Player: BRILLIANT! Works perfectly!
Thanks for the tip!
tmagritte said:
OK, gave those a try:
BS Player: Slow Motion...
Dice Player: BRILLIANT! Works perfectly!
Thanks for the tip!
Click to expand...
Click to collapse
Hence the name, BS player' It's BS cause they wanna market their stuff and make people pay, Their software acceleration is horrible. Dice player uses HW Accelerator which is why the video's are intensely smooth.
Misledz said:
Hence the name, BS player' It's BS cause they wanna market their stuff and make people pay, Their software acceleration is horrible. Dice player uses HW Accelerator which is why the video's are intensely smooth.
Click to expand...
Click to collapse
BS player also uses HW acceleration. In my experience it worked fine with most video - it has some problems in the first few seconds which Dice doesn't (since it doesn't start the video until it's loaded) but after it "warms up" it seems to work just fine for most of the stuff.
BS Player has some nice extra features like LAN mode, automatic subtitle downloading etc. But yeah, Dice player is usually better for playing movies "locally" (I'm using CIFSmanager to mount my media folder over wi-fi).
Every now and then you come across videos that Dice has problems with however, and then BS usually works (once I had a video that played at like double speed in Dice player, while the audio was normal speed. Changing the 1.0x 1.5x etc. speed settings on the right had no effect. BS player helped then ), so I keep both on my device.
nightmarebadger said:
BS player also uses HW acceleration. In my experience it worked fine with most video - it has some problems in the first few seconds which Dice doesn't (since it doesn't start the video until it's loaded) but after it "warms up" it seems to work just fine for most of the stuff.
BS Player has some nice extra features like LAN mode, automatic subtitle downloading etc. But yeah, Dice player is usually better for playing movies "locally" (I'm using CIFSmanager to mount my media folder over wi-fi).
Every now and then you come across videos that Dice has problems with however, and then BS usually works (once I had a video that played at like double speed in Dice player, while the audio was normal speed. Changing the 1.0x 1.5x etc. speed settings on the right had no effect. BS player helped then ), so I keep both on my device.
Click to expand...
Click to collapse
I would love to know how to get CIFSManager to work, Would be epic to sync music folders via Wifi without having to copy/update it often
Misledz said:
I would love to know how to get CIFSManager to work, Would be epic to sync music folders via Wifi without having to copy/update it often
Click to expand...
Click to collapse
A simple search: http://forum.xda-developers.com/showthread.php?t=1468498&highlight=cifs .
Basically, you have to push the cifs.ko module and then insmod it. Some ROMs (like the 3G ICS KANG) have the module included in the appropriate folder, so you can easily just modprobe it (open terminal: write "su" and then "modprobe cifs").
Then you just install CIFSmanager and set it to the appropriate IP/folder (for instance something like 192.168.1.42/Media - this would go to the comp at 192.168.1.42 and try to load up the shared folder with the name "Media").
You'll probably want to set up your router so it always gives the same IP to your media computer, as you don't want to check it's IP and change the settings every time
PS: Using cifsmanager is not without it's downsides though. I've noticed that if I turn off the wi-fi without first unmounting through the manager, the tab freezes (for about half a minute or so) when you try to show the folder containing the networked files. Mind you, I say show, not open - even just trying to see how many files are inside can lock it.
I worked around that by creating a CIFS folder on the root of the "sdcard", then extra folders inside CIFS for each mount. So I have /sdcard/CIFS/XBMC and /sdcard/CIFS/Music. Now I can safely look at my /sdcard folder without my tab freezing up (if I forget to unmount) - but if I try to open the CIFS folder it'll freeze up for a bit, then it'll give me the option to kill my file manager.
So basically, don't put the folder into which you'll mount directly on the root of your sdcard, or it'll become unusable if you forget to unmount
Hi
i have use mx player for a while on my tablet.
but since they removed the DTS audio codec i have switched to vplayer
but my issue on my prime is that when i play for instance an episode of game of thrones or breaking bad on 720p .mkv version it starts ok...
but after a minute... the audio decoder doens't work anymore and it seems like you can hear only the background noise...
i used to have the same problem with mx player, but there i had found an easy option make the audio normal again. I use to switch form hardware <--> software decoding. And then it would be ok.
the odd thing is that this doens't happen with HD movies...
But for the vplayer i haven't found a sollution. Is there anyone who had te same issue?
thanks
I had issues with MX player when trying to play 1080p .mkv files and the best solution i found was to download and use BSPlayer and go into settings and set it to use Hardware decoding (BSEngine).
Never had any issues and 1080p .mkv files play perfectly - even on power save mode
diallito said:
Hi
i have use mx player for a while on my tablet.
but since they removed the DTS audio codec i have switched to vplayer
but my issue on my prime is that when i play for instance an episode of game of thrones or breaking bad on 720p .mkv version it starts ok...
but after a minute... the audio decoder doens't work anymore and it seems like you can hear only the background noise...
i used to have the same problem with mx player, but there i had found an easy option make the audio normal again. I use to switch form hardware <--> software decoding. And then it would be ok.
the odd thing is that this doens't happen with HD movies...
But for the vplayer i haven't found a sollution. Is there anyone who had te same issue?
thanks
Click to expand...
Click to collapse
Dude, go for DICE player. For me, on my prime it works flawlessly.
MXR2 said:
Dude, go for DICE player. For me, on my prime it works flawlessly.
Click to expand...
Click to collapse
Seconded, definately! DicePlayer playes anything and everything.
fordwolden said:
Seconded, definately! DicePlayer playes anything and everything.
Click to expand...
Click to collapse
Third! It's what I use!
Tried different formats?
I've only had my TP for a short time and have only tried a couple of movies on it. Not knowing which format was best I chose to rip to MP4 format and it hasn't given me any trouble so far. Is there some advantage to .mkv?
mkv is more of a losless wrapper, better quality, no compression, much larger file than mp4
The thing with Diceplayer or most players doesn't render embedded subtitles. MX Player renders it fine though. So even thought I get artifacts on MX Player when playing 10bit MKV or 1080p MKV animes, I stick with it. Yes I messed with the settings on those other players.
Well I'm getting issues with Dice not wanting to open files with DTS audio. If I open the video through file manager and choose Dice, it'll play the video no problem but no audio. If I try to open inside Dice, it crashes. Vplayer works with audio, but drops frames even if I choose 'hardware acceleration' I'll try mx and see if that works.
EDIT:
Nope, MX won't play the audio either. It at least shows me that their is an audio track, and that the audio is DTS track, but it won't play it. Any suggestions besides transcoding the audio?
i believe it was when MX player got updated to 1.6 that they removed the DTS codec. If you never had problems before they removed the codec and prefer mx player just google MX player apk X.XX and find the version with the codec in it. I would tell you the website to go to, but it's a no no on XDA.
mburke178 said:
i believe it was when MX player got updated to 1.6 that they removed the DTS codec. If you never had problems before they removed the codec and prefer mx player just google MX player apk X.XX and find the version with the codec in it. I would tell you the website to go to, but it's a no no on XDA.
Click to expand...
Click to collapse
Hey thanks!! Downloaded 1.5a and bam! DTS playback is perfect! Thanks again!
FYI
Dice version 2.0.5 also has DTS intact. You can find it somewhere on google, and plays HD files better in my opinion.
The latest version of MX Player that still supports DTS audio is 1.6f, and for Dice Player it's 2.0.6.
I've heard these versions are incompatible with Jelly Bean, so it looks like we'll have to find a new solution once the update comes out. (likely switching to BS Player)
I've always been an advocate of Dice, and with the majority of my stuff in Xvid or more recently, mp4, all stashed on a server that was smb shared, it worked a treat.
However, I've never been able to get HD mkvs above 720p to play well, and even those had the occasional laggy or jerky moment. I always put that down to network speed, though.
However, I've just tried the latest BS Player and all I can say is wow. It has just played all of my 1080p stuff over the LAN without breaking a sweat.
I am jumping ship. Very recommended.