Backup/ restore options for Atrix - Atrix 4G Q&A, Help & Troubleshooting

I am only asking because I no longer able to do backup/resrore in Tenfars CWM. Currently only using that to update Gingerblurr. But I keep getting MD5 errors when I try to restore to a stock 1.8.3. I have also posted in Tenfars thread but apparently he does not reply to any of my questions. Although the CWM worked perfect before in 1.5.7, but when I updated to 1.8.3 I no longer am able to restore either from the internal sdcard or external sdcard path. So is anyone succesful with a different app to accomplish this?

Sorry to new a hater, but wrong forum you could always use rsdlite to do a restore. I believe some one made a 1.2.6 that won't wipe your data.
Sent from my MB860 using XDA App

Try to reinstall... mine worked last time I needed to.
Sent from my MB860 using Tapatalk

Moved to proper forum.

Related

Question About Backing Up Before Flash

I backed up my stock os with clockwork recovery, and backed up my apps with titanium, I read that I shouldn't back up user data other than wifi and bookmarks due to possible problems. Do I need to do anything else as far as backing up goes? Will I have to reconfigure my apn and network settings to be able to make calls and use data service, or will bionix v include that when I flash?
Sent from my SGH-T959 using XDA App
It all stays....just be sure your backup is a 2.2 cause your gonna have problem if you run a 2.2 rom and try to restore a 2.1 rom
Well....I'm glad I asked. My plan was to go to bionix v from 2.1 stock rooted. So I'll just be better off downloading them again after flashing? Is there a full list somewhere of all the apps bionix comes with?
Sent from my SGH-T959 using XDA App
Restoring your apps from to 2.1 to 2.2 shouldn't give you a problem. I did this many times and never had any issues. Its only the system data you need to worry about giving you issues.
Sent from a Galaxy S far....far....away.
the apps, it will never give you a problem.
but restoring the whole system like a nandbackup will if you go from 1 firmware to another.
Other backups like launcher pro backups will not do anything either, they're all in your SD Card.
xriderx66 said:
the apps, it will never give you a problem.
but restoring the whole system like a nandbackup will if you go from 1 firmware to another.
Other backups like launcher pro backups will not do anything either, they're all in your SD Card.
Click to expand...
Click to collapse
What he said....thats what I was getting at
Thanks guys...one last question before I flash.
Will I be ok to backup and then restore on bionix v system (bloatware) like "thinkfree office" and "avatar" and "the sims" and "daily briefing"?
I ask because titanium doesnt back them up when I batch them as user apps so I have to back them up manually.
Sent from my SGH-T959 using XDA App
GoodVibrant-ions said:
Thanks guys...one last question before I flash.
Will I be ok to backup and then restore on bionix v system (bloatware) like "thinkfree office" and "avatar" and "the sims" and "daily briefing"?
I ask because titanium doesnt back them up when I batch them as user apps so I have to back them up manually.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Hey.."there's an app for that".... yep in the DEV section is an easy tool called Android Customization Suite or you can put them back on manually
I may have to check that out. I think I'm going to go a different route with the applications.
One final question before I flash. I'm just about ready.
In titanium backup.....will I be ok to backup (in 2.1 stock) and restore (in 2.2 bionix) just the green text system data such a MMS settings and Voicemail dialer and my apn settings (only the stuff in green text) our does all of that need put in manually? I've read that its ok to restore green text system data such as bookmarks and wifi but wanted to know if the other green text stuff was ok as well.
Sent from my SGH-T959 using XDA App
The ROM DEV recommends not to install any system data or system apps from a TB...So I would say, if you went through all of this hard work to get yourself a custom ROM just to have to re-do it because of an incompatible file or data problem..then that would be on you..
If it were me I would not bring anything over from a 2.1 to 2.2 system. I would just put it back in manually
Right on man....thats what I'm gonna do then.
I checked out that customization suite and I'm think that will be able to help me get the system apps back on here that I want. I won't really know if I can get it to work til after I take a leap of faith and just flash the rom. With what everybody else has said about how badass team whiskey's bionix v is, I guess I should probably trust the overwhelming opinion and flash it. Then worry about how to correctly get the bloatware back on here that I want. Im pretty sure I know what I'm doing at this point. Just have to do it.
Thanks a lot for your help man.... I appreciate the time you took to give me advice....as well as everyone else.
I'll let everyone know how it goes.
Sent from my SGH-T959 using XDA App
It seems like every time I get ready to flash I come up with another question.
Do I need to copy the nandroid backup of my current stock 2.1 to the external sd or to my pc before flashing? I know bionix wipes the system automatically when flashing so won't it remove the nandroid backup?
** Nevermind....found the answer. Leave nandroid backups where cwr places them. If this is incorrect...someone let me know please**
Sent from my SGH-T959 using XDA App
sounds right to me...only way its gonna come up missing is if you format or delete the cwm folder yourself
Thanks for your help jmcghee. Finally took the plunge and Im rocking bionix with most of my apps and loving it. This thing is now a rocket ship. It blows my mind how fast it is. Its like going from a dell to an alienware. All I reccommend for you guys that haven't flashed yet but are thinking about it...read, read, read, ask questions and go for it. Its not as hard as it seems at first. And the noob guide is invaluable.
Sent from my SGH-T959 using XDA App

[Q] Root 4.1.83 Without Formatting SDcard

I have been looking for a way to root before I go ahead and install the 4.1.83 update. But the only way I can find is Gingerbreak and from what I have read it formats the SDcard.
Is there a way to root without having to lose everything? Why does the SDcard have to be formatted? The two other times I rooted my device there was no formatting required.
It's an unresolved side-effect, not a planned behavior. So it's a consequence of an exploit.
You don't have to lose everything - you have to backup before you use the exploit.
AFAICT it simply wipes the internal sdcard. So backup the contents, use TB to backup apps and data. Then go for it.
First time I did not backup properly and lost the apps (2) I moved to media and the music I'd copied from my pc. Second time managed to retain everything except, somehow, it broken the homescreen links to two apps - though the apps were still present, I have no idea what happened but it was a 10 second fix.
I unmounted the internal sd card before running it, and it didn't delete anything. Ymmv.
Sent from my MB860 using XDA App
I didn't do anything special before running Gingerbreak and nothing was erased...
Sent from my MB860 using XDA App
Excellent, why didn't I think of that - will try that next time!
Thanks.
Nigel
I didnt back anything up and ive done it 3 times now. Each time it only deleted angry birds.
Blue Puma. smart!
Sent from my Motorola Atrix 4G using Tapatalk
err you can still flash the 1.2.6 sbf than do the frozenfish root with the afterupdate, than ota to 1.5.7 and ota to 1.8.3 and use the afterupdate. it does take up way more time and effort than the gingerbreak method
I discover a way to run gringerbreak
download it here http://forum.xda-developers.com/showthread.php?t=1044765
Send the apk to your email (yourself)
open it, download and install

[Q] Detailed Instructions for Froyo -> Gingerbread Rom/Radio Flash

I have been scouring the forums to find a detailed set of instructions to flash a gingerbread ROM and radio. There are a lot of part explanations but I cannot find one single post which gives you the step-by-step from start to finish.
It would be nice if there were a simple set of instructions for all gingerbread ROMS on the thunderbolt. However, if there is not, here is what I personally would like to do:
I am running The Perfect Storm v1.4 and Imoseyon's LeanKernel 2.6.0.
I want Gingeritis and Imoseyon's GB LeanKernel.
I am sure that someone has covered this somewhere, but I can't find it. Sorry for the classic noob question. Any help would be appreciated.
First you want to download your rom and kernel to your sdcard (duh )
You also want to find the thread in the Dev section titled "obligatory radio thread" or the thread that has MR2 or MR2.5 radios and download one of those. It should be named PG05IMG.zip, so verify that. Place this file on the root of your sdcard (not in a folder), and then reboot into recovery. Wipe data and cache,as well as Dalvik under advanced. Now that you have wiped, install your rom and your kernel. After this, don't reboot, but pull your battery. Put the battery back in the phone and hold the volume down button. While holding volume down, hold the power button and you should see the HTC bootscreen. If you're still holding both buttons it will take you to the bootloader. From here follow the instructions to flash your radio (this is all you can do if the PG05IMG.zip file is on your sdcard. After the phone does its business it will prompt you to reboot, so be sure to do so. There you go
Make sure to hook your phone to your computer and delete the PG05IMG.zip file when you're done
Sent from my ThunderBolt using XDA Premium App
The only thing I'm shaky on is how to handle renaming the files between flashing the radio and the rom while in recovery.
Also, with regards to backups, I have two questions.
1 - after I use clockwork to do a nandroid backup, do I need to move it from the card. In other words, will flashing effect the nandroid backup such that I should copy it on to my computer.
2 - If I use titanium backup to back up my apps, will I need to do anything before flashing to be able to restore them when I'm in the new rom?
Sugarbean9 said:
The only thing I'm shaky on is how to handle renaming the files between flashing the radio and the rom while in recovery.
Also, with regards to backups, I have two questions.
1 - after I use clockwork to do a nandroid backup, do I need to move it from the card. In other words, will flashing effect the nandroid backup such that I should copy it on to my computer.
2 - If I use titanium backup to back up my apps, will I need to do anything before flashing to be able to restore them when I'm in the new rom?
Click to expand...
Click to collapse
To address the re-naming of files whilst in recovery, you can mount your SD card from clockworkmod recovery by going to mounts and storage > mount USB storage. After you've mounted, just use your Windows/MAC/Linux interface to organize and re-name files.
Regarding your last two questions, no and no. Nandroids, Titanium Backups, SMS+ backups, etc. all save to your SD card in one place or another. So unless you plan on partitioning and/or formatting your SD card before you restore your various backups, then you're fine. However, if you do wipe your SD card at any point, either accidentally or purposely, it is always good to have a copy of it somewhere, so I always like to make sure my SD card is on my computer somewhere with at least one nandroid on it Hope this helps! If you want step-by-steps for going from Froyo to GB, I can help you out with that, just holler.
LAST QUESTIONS (I hope)
After I've flashed the new rom, I've read that you can restore user apps, but not system apps. So the first question is, if reinstall titanium from the APK, will titanium find the backup information that's on the SD card? Second, can you restore the user data as well or will I lose all of that information. If so, can I get it back?
You guys rock. I'm pretty sure this will be a helpful thread for a lot of people like me who need a little reassurance that they won't brick their phone.
Sugarbean9 said:
LAST QUESTIONS (I hope)
After I've flashed the new rom, I've read that you can restore user apps, but not system apps. So the first question is, if reinstall titanium from the APK, will titanium find the backup information that's on the SD card? Second, can you restore the user data as well or will I lose all of that information. If so, can I get it back?
You guys rock. I'm pretty sure this will be a helpful thread for a lot of people like me who need a little reassurance that they won't brick their phone.
Click to expand...
Click to collapse
Yes, reinstalling titanium backup and using the restore feature is exactly the intended use. Unless you've manually changed the default backup location, it will find it on its own and you can restore both the apps themsevles and the user data (but only if you've backed that up within titanium as well!) However, I don't think titanium backs up sms/mms messages, so you'll have to grab smsbackup+ or a similar application to do that (its free ) Best of luck!
Sent from my Mecha using XDA Premium App
May I also recommend titanium backup pro? Haha I'm not related to the Dev I promise but if you have a lot of apps the pro version saves a lot of time because you don't have to push install for each iindividual app goodluck!
Sent from my ThunderBolt using XDA Premium App
joshnichols189 said:
May I also recommend titanium backup pro? Haha I'm not related to the Dev I promise but if you have a lot of apps the pro version saves a lot of time because you don't have to push install for each iindividual app goodluck!
Sent from my ThunderBolt using XDA Premium App
Click to expand...
Click to collapse
I couldn't agree more, for us crackflashers it is a must +1!
Sent from my Mecha using XDA Premium App
On the subject of pulling battery while in recovery. For me at least, an easier option is to reboot into bootloader using adb. After flashing your Rom and kernel just type adb reboot bootloader in your command prompt, and no battery pulling required.
Sent from my ADR6400L using XDA App
cowisland said:
On the subject of pulling battery while in recovery. For me at least, an easier option is to reboot into bootloader using adb. After flashing your Rom and kernel just type adb reboot bootloader in your command prompt, and no battery pulling required.
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
This is what I prefer, but I noticed a lot of people like to flash when they're not near a computer
Sent from my ThunderBolt using XDA Premium App
joshnichols189 said:
May I also recommend titanium backup pro? Haha I'm not related to the Dev I promise but if you have a lot of apps the pro version saves a lot of time because you don't have to push install for each iindividual app goodluck!
Sent from my ThunderBolt using XDA Premium App
Click to expand...
Click to collapse
Actually using TB root (free) you can also batch restore apps rather than individually restore., you just click on menu after clicking on backup/restore, and then select batch and it'll show you all your options.
pkuo1117 said:
Actually using TB root (free) you can also batch restore apps rather than individually restore., you just click on menu after clicking on backup/restore, and then select batch and it'll show you all your options.
Click to expand...
Click to collapse
You can batch in both versions of Titanium, what he was saying is that with premium you can batch restore your apps and not have to click install and ok on each one after they install - it skips that step, which for me was annoying.
joshnichols189 said:
This is what I prefer, but I noticed a lot of people like to flash when they're not near a computer
Sent from my ThunderBolt using XDA Premium App
Click to expand...
Click to collapse
Sounds like bootloader reboot option would be a good addition to CWR.
Sent from my ADR6400L using XDA App
Can you restore user app DATA or just the apps themselves?
Sugarbean9 said:
Can you restore user app DATA or just the apps themselves?
Click to expand...
Click to collapse
You can restore both the application data and the actual .apk
Sent from my Mecha using XDA Premium App
I just flashed from VirusRom (froyo) to Das BAMF 2.1 Remix. I have tried both the 2 and 2.5 Radio I found in the forums here and I can never connect to 4g. 3g seems to be fine, but I can never get 4g and I am in a very strong 4g area (normally have full bars). Any suggestions as to how I can fix this?
clucernoni said:
I just flashed from VirusRom (froyo) to Das BAMF 2.1 Remix. I have tried both the 2 and 2.5 Radio I found in the forums here and I can never connect to 4g. 3g seems to be fine, but I can never get 4g and I am in a very strong 4g area (normally have full bars). Any suggestions as to how I can fix this?
Click to expand...
Click to collapse
I myself had some issues with radios as well. I'm not sure if you are having the same problems as I was but here is how I fixed it:
1. Reboot into recovery, wipe cache, wipe dalvik (3 times each, just in case...), re-flash your kernel (here's a shameless plug if you don't already have a favorite kernel - Imoseyon's LeanKernel is killer).
2. Once flashed, make sure your radio of choice (MR2 has been very good for me so far) is on your SD root named as PG05IMG.zip (you can rename or copy the radio by mounting the SD card in recovery by selecting mounts & storage -> mount usb and doing your business there), either pull the battery and power up holding the volume button as described above in this thread or use adb (I found using adb more simple). For adb, type "adb reboot bootloader" - once in hboot, select bootloader and your radio will flash. Once done reboot.
See if that helps as it did for me. If it doesn't, there are plenty of other very clever folks with their eyes on this thread who can help you better.
Best of luck...

Reading up on Rooting

I rooted my Razr before, but I didn't know what I was doing. What I did was try to install a custom ROM from ROM Manager and when it rebooted I got into a bootloop. Then I didn't know that I could go into the bootloader, take my backup from Titanium Backup and restore it using Clockwork Mod. Any ideas on why it went into a bootloop?
Anyway, I want to prevent that from happening again so I need some website/apo that will give me a lot of informative articles and tutorials.
I apologize for any mistakes I made in this post but as stated I don't but want to know what I'm doing.
Sent from my DROID RAZR
I don't know the answer but are you sure that titanium backup is restorable by the clockwork? It would be sweet....
Sent from my XT910 using xda premium
I think it is. I saw a tutorial of it.
Sent from my DROID RAZR
I will check - good to know if its possible
Sent from my XT910 using xda premium
Leviathan26 said:
I rooted my Razr before, but I didn't know what I was doing. What I did was try to install a custom ROM from ROM Manager and when it rebooted I got into a bootloop. Then I didn't know that I could go into the bootloader, take my backup from Titanium Backup and restore it using Clockwork Mod. Any ideas on why it went into a bootloop?
Anyway, I want to prevent that from happening again so I need some website/apo that will give me a lot of informative articles and tutorials.
I apologize for any mistakes I made in this post but as stated I don't but want to know what I'm doing.
Sent from my DROID RAZR
Click to expand...
Click to collapse
www.aashrey99razr.wordpress.com
There is your solution
BTW I found that restore of the TB backup using the CW:
http://www.addictivetips.com/mobile/how-to-use-titanium-backup-for-android-complete-guide/
Lastly, if you want, you can create an installable zip file of Titanium Backup to be installed via a custom Recovery. Go to More and hit Create “update.zip”… to be taken to a screen similar to he one shown below. Choose the Script type wisely, use the newer Edify script if you’re on ClockworkMod recovery 3+ or the older Amend script for ClockworkMod recovery 2. You can choose whether to install Titanium Backup as a system or user application. Select the name type and hit the Create “update.zip”… button to create the file.
Click to expand...
Click to collapse
I still need some centralized place where I can read up on bootstraps, safe straps, root, and clockwork Mod.
Sent from my DROID RAZR
Its all on youtube, all you have to do is search

{For All Xperia} Online Nandroid Backup / Nandroid Backup without re-booting

Hey there guys I came across this useful tool today when I was poking around the ARC section it lets you make a nandroid without having to boot into recovery. This isnt my work Im simply passing it on so I hope he doesnt care too much about me posting this here.
***ALL crdeit goes to ameer1234567890***
Nandroid backups are usually performed in recovery mode. This means you would have to turn off your phone and reboot in recovery mode, which wastes a whole lot of time rebooting and a lot more time offline. For me, this has been a killer as I do regular nandroid backups. Having to reboot in recovery and finding missed calls, sms from my wife and friends is totally not accepatable for me. So, I set to develop an online nandroid backup tool which can do nandroid backups without switching off my phone.
Today, I am releasing it to public, as it may serve good for some others too. This tool is specifically for Xperia phones, but should work with any model of android phones.
This tool backups /system , /data , /cache & .android_secure partiotions to /sdcard/clockworkmod/backup directory. The date format used for folder name is the same used by CWM itself and nandroid backups created with this tool can safely be restored using CWM. If you would want to have a custom name for backup folder, pass an argument with the name to the script and it will use the name.
Feedback (especially ideas to improve) are most welcome.
Requirements
1. Rooted android phone
2. A terminal emulator installed on phone
3. Busybox
4. A working CWM based recovery installed
5. Some patience
Installation
1. Download and copy zip file to SD card
2. Reboot into recovery
3. Choose install zip from SD card, select zip and flash .
4. Reboot!
Usage
1. Open terminal emulator
2. Type su to obtain root
3. Type onandroid
4. Wait and watch
Original thread: http://forum.xda-developers.com/showthread.php?t=1620255
As usual Im not responsible if your phone explodes, catches fire, etc, etc so please read everything and try not to post stupid questions like " does this really work?" cause it wont be answered. I wouldnt of bothered posting this here if it didnt work. Have fun guys!!
Well let me the 1st....does it work? :banghead:Sorry I'm just playing friend.lol. I'm going to try this right now.
Sent from my R800i using xda premium
thanks for this gonna try rite now!!! i myself do regular backups as well.
edit: working working as i type! this is sick
hey you should post a link to the dev`s original thread so we could thank him and if possible donate for this amazing work.
My backup completed in 4 min 43 sec. And it seems to have worked fine. Thanks.
Sent from my R800i using xda premium
cyrusalmighty said:
Well let me the 1st....does it work? :banghead:Sorry I'm just playing friend.lol. I'm going to try this right now.
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Ha ha ha! I knew it was bound to happen. Its pretty straight forward and really low risk I doubt anything could be messed up even if you tried but yea have fun! Hopefully it is useful to some out there
Sent from my R800a using XDA App
solomon4400 said:
thanks for this gonna try rite now!!! i myself do regular backups as well.
edit: working working as i type! this is sick
hey you should post a link to the dev`s original thread so we could thank him and if possible donate for this amazing work.
Click to expand...
Click to collapse
Will do give me a few minutes..... link to original thread in OP throw some thanks his way when you get a chance.
Sent from my R800a using XDA App
Thanks for sharing!
When I tried to run this, it says "Checking for required tools" followed by "mkyaffs2image not found in path"
I tried uninstalling/reinstalling busybox and installing it to /system/bin and not xbin. This time it sort of ran but I got a bunch of errors and no backup.
Any suggestion on how to fix this?
Sent from my R800x using xda premium
Isn't this inherently flawed since files on the rom are still being used and written while the backup is taking place? Neat idea though, don't get me wrong
netizenmt said:
When I tried to run this, it says "Checking for required tools" followed by "mkyaffs2image not found in path"
I tried uninstalling/reinstalling busybox and installing it to /system/bin and not xbin. This time it sort of ran but I got a bunch of errors and no backup.
Any suggestion on how to fix this?
Sent from my R800x using xda premium
Click to expand...
Click to collapse
No idea never seen that error its been working perfectly on my other play and bro's arc, I'd check the original thread and see if anyone else has the same issue
Sent from my R800a using XDA App
thatsupnow said:
No idea never seen that error its been working perfectly on my other play and bro's arc, I'd check the original thread and see if anyone else has the same issue
Sent from my R800a using XDA App
Click to expand...
Click to collapse
Yeah, I thought of that right after I posted here. There are plenty of people posting the same error, so we'll see what happens.
Sent from my R800x using xda premium
jacklebott said:
Isn't this inherently flawed since files on the rom are still being used and written while the backup is taking place? Neat idea though, don't get me wrong
Click to expand...
Click to collapse
I have been asked the same question. Have a look at here for the answer.
ameer1234567890 said:
I have been asked the same question. Have a look at here for the answer.
Click to expand...
Click to collapse
Fair enough. Hopefully people follow the advice of not doing anything during the backup, so they aren't disappointed when the changes don't get backed up
Should be fine I've taken a call and sent a few text messages while backing up. No problems for me at all
Sent from my R800a using XDA App
I tried to do a restore from the online nandroid backup I made and even though it said "restore complete" my SD-ext(4) partition would not load its shortcuts and widgets. The funny part is link2sd didn't even detect any SD-ext as if it wasn't backed up. I thought it said that it backed up SD-ext during online backup, but not sure. I'm wondering if it might help to factory restore before restoring backup. I may try that to see and I'll report back if noone reports similar problem.
Edit**During backup I was not doing anything else with phone other then watching the amazing online backup screen. Also I tried to "re-create mount scripts" but never got option from link2sd even after reboot.
Sent from my R800i using xda premium
cyrusalmighty said:
I tried to do a restore from the online nandroid backup I made and even though it said "restore complete" my SD-ext(4) partition would not load its shortcuts and widgets. The funny part is link2sd didn't even detect any SD-ext as if it wasn't backed up. I thought it said that it backed up SD-ext during online backup, but not sure. I'm wondering if it might help to factory restore before restoring backup. I may try that to see and I'll report back if noone reports similar problem.
Edit**During backup I was not doing anything else with phone other then watching the amazing online backup screen. Also I tried to "re-create mount scripts" but never got option from link2sd even after reboot.
Sent from my R800i using xda premium
Click to expand...
Click to collapse
This tool (prior to v3) does not backup sd-ext partition. In the first post, you can see what the tool backups.
PS: If you can send me a previous backup of your sd-ext, I can work on adding sd-ext backup support to the script.
I still can't get this to work.
Sent from my R800x using xda premium
netizenmt said:
I still can't get this to work.
Click to expand...
Click to collapse
Can you post the error?
ameer1234567890 said:
Can you post the error?
Click to expand...
Click to collapse
Here it is, the same error as before. This is with the latest 2.0 version. I'm running stock 2.3.4 rooted. Busybox is1.94 full.
Sent from my R800x using xda premium
wow.. that would be great backing up online... i'm gonna try now..

Categories

Resources