Related
Hello & yes, yet ANOTHER person with this issue. This is what I've done:
It all started by going out to unlockr's page & following their rooting how-to. When I did this it put it in the never ending dell screen flashing lights loop. I've researched quite a few hrs on this. This is what I tried:
1) Doing factory restore (holding volume buttons & pwr buttons down) & choosing restore.
2) Borrowed a buddies SD card & tried a restore (did nothing)
3) Followed a couple of guys instructions on doing a restore one of them being here: http://forum.xda-developers.com/showthread.php?t=776883
After following the directions I did see it look like it was updating back to the 1.6 OS, but after it rebooted it was still stuck in the Dell flashing loop cycle.
SO I did probably the dumbest thing I could do & took it back to Best Buy who is shipping it off... most likely to get my warranty canceled, but I didn't know what else to do. I had purchased their protection plan, so I'm not sure how it's gonna go. They would have replaced it in the store, but I had already returned my 1st one as it wouldn't boot right out of the box (not my fault).
So I figure if they don't flash it at Dell & get it back to working, I'll have to keep working on it myself to correct the issue....
So I guess my question is, any advise on why mine is being so difficult or is this just the way it is & it takes several attempts to flash these things sometimes? Or has Dell implemented a security feature in the new releases & that's what is causing my headache?
Those of you who feel the need to rain down the "Dumb thing to do returning it" please save those comments as I've already stated "I know".... I just need some positive input on getting this thing back on "it's feet" IF Dell doesn't fix it for me.
I will keep you posted on the Best Buy/Dell Drama that I'm sure will start up... I will say that if it's not fixed, I can't say that I'll continue with paying Best Buy $10 a month for a protection plan, as they supposedly will replace the phone if it was damaged in any way. If anyone has info or a story on that part of it I'd like to hear it as well.
Thanks in advance!
Look for the upgrading downgrading guide in xda. Nornally starting from 4399 build is a good start to get you back up and running.
http://android.modaco.com/content/dell-streak-streak-modaco-com/317549/how-to-go-back-from-21-to-00-builds/&source=android-home&ved=0CBoQFjAB&usg=AFQjCNH7W3lUKYibzBQg4qVNxKs955Q0LQ
Sent from my Dell Streak using XDA App
DON'T USE THE UPGRADING/DOWNGRADING GUIDE!! IT WILL BRICK YOUR WHITE STREAK!!
The white Dell Streak is known to have something different going on with it. There is a special tool (QDLTool) that is needed to upgrade it/unbrick it. It takes you directly to stock 2.2 and you can do what you want from there. See this thread here for more information and a fix.
http://android.modaco.com/content/d...24010/warning-white-dell-streak-is-different/
Thanks for the knowledge! Didn't know there was a difference, although I suspected something was amiss when I was doing what I was instructed to do but not getting results....
Any more info is appreciated so keep it coming!!!
erm not that im saying this BUT you got protection(inshureance)accidently drop it in a sink full of water or some such like acident pay your excess and get a new one.
but i dint say that.There norm pritty good at replaceing your phone after such an acident
We'll see what happens when I get the phone back... the post from TopShelf95 may just have saved it from a fate similar to that! HA!
FOR WHITE DELL STREAKS
You'll need the QDLTools for this... so please search/google the links or posts for that.
Typed instructions from these posted from videos that I can't link to yet as I'm a noobe here...
(Hope I didn't fat finger & mistyped anything so be on the safe side & don't cut and paste command line stuff)
1) Start, type CMD in the “programs search area”, CTL, SHIFT & Enter to start command window in Admin mode.
2) Type “bcdedit –set loadoptions DISABLE_INTEGRITY_CHECKS & press “enter”
3) Type “bcdedit -set testsigning on” & press “enter”
4) Reboot
5) Go to the directory where you’ve stored the QDLTools (ex. C:\Streak\RepairTool) , then into the subfolders until you find the driver folder, open the subfolder “Driver_2.067”, Then “Test Certificate” .
6) Right click on qcusbtest & install cert
7) Choose “place all certificates in the following store” & browse
8) Install cert in the “Trusted Publishers” store, when done click “Ok”
9) Right Click on the qcusbtest cert again & select “Install Certificate” again
10) Choose “place all certificates in the following store” & browse
11) Now install cert in the “Trusted Root Certification Authorites” store
12) Click “Ok” when done
13) Remove & replace battery in Streak.
14) Hold down the Volume Up button & plug in USB cable
15) PC should detect connection & install drivers (which will fail)
16) Open control panel & go to device manager
17) Locate the “Qualcomm HS-USB Diagnostics 9002” (if it doesn’t have a yellow exclamation mark by it, you have the driver & can skip forward to
18) Right click & select “Update Driver Software”
19) Select “Browse my computer for driver software”
20) Select “Let me pick from a list of…”
21) Choose “Show All Devices” & click “Next”
22) Click on “Have Disk” & browse to the repair folder, drivers are in the Driver_2.067 folder, if you are using 64bit OS go to WIN64 (Win32 for 32bit)
23) Select WNET unless there is a folder for your version of Windows (for 64bit choose AMD64 unless you have an Intel Itanium CPU)
24) Select “qcser.inf”, click Open, then “Ok”
25) Choose “Qualcomm Incorporated” & choose “Qualcomm HS-USB Diagnostics 9002”, then click “Next”.
26) Click “Yes” if you get an Update Driver Warning dialogue box, then “close” once installed.
27) Now go back to QDLTool folder
28) DISCONNECT USB CABLE FROM STREAK
29) Start the QDLTool utility
30) On the QDLTool Upgrade Build screen the area “Device” with “Port:” in it should say “Not Connected”.
31) Make sure USB cable is UNPLUGGED & remove batter from the Streak.
32) LEAVE BATTERY OUT FOR AT LEAST ONE MINUTE
33) Replace battery & install back cover on Streak
34) Hold down Volume Up button & connect USB cable to go back into diagnostics mode
35) “Port” in the Device window will change to ”Qalcomm HS-USB Diagnostics 9002 (COM4)” once the Streak has been identified.
36) Click “Run” to start the update. Takes from 3 to 4 minutes typically.
37) IF YOU GET A FAILURE AT THIS POINT go back to steps 31 thru 34. Wait for step 35 & follow 36.
38) When it says “Waiting for Reboot” your Streak should reboot itself, ready to go into Fastboot mode
39) IF IT FAILS AT THIS POINT: your ADB drivers for fastboot are not installed correctly, so fastboot may be erroring, install drivers & restart steps 28 thru 36.
40) At this point your device should have been updated & should soon finish booting into the updated Android release.
41) Take your PC out of Test mode by going to “Start”, type CMD in the “programs search area”, CTL, SHIFT & Enter to start command window in Admin mode
42) Type in “bcdedit /deletevalue loadoptions
43) Type in “bcdedit –set testsigning off
44) Reboot
other solution
Solution # 2
Take the phone back to where you bought it and get the black one.
As some of you may know my white one met similar fate and after hours of getting no where i just took it back and got the black one.
after 20 minutes of getting it home i had froyo 2.2 running on it.
besides..do you really want a white phone? lol
i didn't. they were supposed to give me a black one to begin with..
I told the returns lady i wanted a black one and they gave me a white one. when they booted up the phone it didnt boot and they did not say one word. they just went and got me a black one.
Frankly this was the only reason i bought one from bestbuy..
it certainly wasnt because of their pricing
Good luck.
Bigfoot, if you'll reread my original post you'll see that I've already returned one & tried to return the white one, but they would only allow one instore return. I don't care if it's white or black (I'm not racist HA!) it's gonna be in a Otterbox Defender anyway. I just want a phone/tablet that works at this point.
We'll see how the above mentioned "fix" works if I have to install it when I get my phone back.
I have the white streak too and I can tell you that the QDLTool works like a dream. Just follow the instructions to the letter and you will have 2.2 on it in no time. The Streak is virtually impossible to perma-brick. Since QDLTool works on a lower level than fastboot, it will work even when all else fails.
Awesome again good to know!
Does the qdltool work for the black streak?
Sent from the Dell streak
FINALLY (update)
So after 42 days I FINALLY got my phone back from Best Buy... WORST customer experience... I would tell the whole experience, but I'll just make it short... they couldn't find it at one point, they shipped it back 42 days later, my 16 gig sd card is missing from it & when I got it back, they'd not reflashed the phone. So they did nothing but basically steal my sd card & gave it back to me....
ANYWAY.... After I went back to BB to find out what they were gonna do about my phone not working (which I'll have to call mgr tomorrow) I got home & followed the instructions given in this thread to flash my white dell streak & IT WORKED!!!! No issue 1st time around... Perfect, almost as easy as jailbreaking an iPhone... THANK YOU VERY MUCH FOR THE HELP!!! You guys are awesome...
Now... I have a friend who is also asking will this process work for the Black Dell Streaks... so will it?
also
this puts your system into an unlocked status which enables you to download the official Dell 2.2 ver. One downside to it is it shuts off your wi-fi hotspot...
Good thing about the Dell ver. it fixes the buttons sensitivity for one thing that seems to be an issue on the QDAtools ver... I'm sure later builds that is fixed though (would think it would be)
WRONG
I was wrong (looked in the wrong spot) wi fi hotspot is there... my bad
so by using the tool method on my white streak, does it mean my phone is rooted? or is there more i need to do to root my white streak?
Raikoue said:
so by using the tool method on my white streak, does it mean my phone is rooted? or is there more i need to do to root my white streak?
Click to expand...
Click to collapse
No, it won't be rooted. But that's easy to do. You can stay with Dell stock ROMs (download from their website) or go with DJ_Steve's ROM which is rooted and has lots of other features. Rooting isn't hard, though, if you stay with stock. Just use Super One Click and you'll be good. I'm not sure if either method is supposed to work, but my wife's only was rooted by the second method (rage against the cage or something like that).
Also, QDL Tool works for both black and white streaks.
I have the same situation as the OP. However when I try the instructions I make it all the way to the part of running the QDL tool. There I get an error message at about 12 seconds, during the section just after Run HEX success. The error says:
ERROR[D14]:streaming hello Failed!
ERROR: Download fail!
It then says to remove battery and try again, which I do and get another failure.
Any thoughts besides taking a hammer to this thing?
after the first time it went through the fastboot (Downloading AMSS) it rebooted and I had to manually put it back into the fastboot mode (hold camera) for it to fishing writing everything else.
It Worked Perfect!
I've moved on to the Samsung Galaxy Note... My Streak did it's year or so service as well as it could (it's still working without issue) but I wanted a phone that had actual support, I am an IT tech by day & just don't wanna have to mess with yet another system that I have to do go thru a few hundred pages of forums to figure out the true method of getting something to work or install. iPhone hackers have Android beat in that area for sure... 1 click root/jailbreak is the way it should be.... but iPhone doesn't have a 5.3" screen!!!!!!
I see almost everyone in L9 forum is giving reference link to this flashing guide in their threads, but almost no one is mentioning any credit to this. They are just putting links. What do you all think, pals? Do I deserve a credit or not
Click to expand...
Click to collapse
Thanks to all developers and contributors: Bin4ry , adixtra , unknown_world. I thank to all the users of this thread who gave feedback and reported issues time to time, which helped "us" to make this guide better and perfect.
First thing first, this is not my original work, I have just tried to consolidate all the scattered things together for SAFE and EASY flashing and rooting of L9 variants. Written this guide as many pals were having issues with OFFLINE KDZ FLASHING and help was scattered in many pages creating more confusion.
Wow! After so much of followup with xda mods, finally we got Home (Sub-Forum) for LG L9 series.
PLEASE, USE INFO AT YOUR OWN RISK & INTELLIGENCE.
Flashing KDZ removes Root and CWM, so you will need to root again.
Flashing KDZ does not wipe your data, but if you get bootloops you need to hard-reset it, so please backup data first.
LG Update Tool works on all versions of windows (xp/w7/w8-32/64bit) for flashing any version of Android (GB/ICS/JB). If it does not work on your windows, something is missing on your system and if anyone here cannot help you then, you have find your own ways. Don't expect Spoon-feeding for everything.
DEVICES FLASHED WITH THIS GUIDE AND TESTED OK: LG Optimus 2x (P990) and LG Optimus L9 (P76?)
This thread contains two "MAIN" separate parts.
Post 1) FLASH L9 FACTORY ROM WITH OFFLINE FIX + UNBRICK by fooling Company Software Update Tool by installing local web-server as hosted LG rom database server on your pc. This always worked well for me.
Post 2) Root Rootable KDZ with OLD Bin4ry method.
Post 3) FAQ and More Unbrick and CWM Discussion.
Also visit my NEW FASTER ROOT L9 METHOD for UNLOCKED BOOTLOADER
-------------------------------------
[GUIDE] FLASH L9 Factory ICS/JB ROM WITH OFFLINE FIX + UNBRICK
Works perfect on Win-XP/W7/W8 32bit/64bit. UNBRICKS ALL SOFT-BRICKED L9 (P760/765/P768/P769)
TRUST ME THIS IS NOT LENGTHY PROCESS, I JUST HAVE PUT THEM IN EASY STEPS FOR COMPLETE NOOB PERSON. EXPERTS PLEASE STAY AWAY FROM COMMENTING HARSH ON ME.
THIS METHOD IS ALWAYS FASTER THAN ONLINE WITH PC SUITE, WHICH DOWNLOADS HUGE FILE ONLINE AND YOU NEED TO WAIT UNTIL IT FINISHES DOWNLOADING IN THE MIDDLE OF FLASHING.
In first part of this Guide, we are creating a Local Web-Server for LG Support Tool and will try everything which will PREVENT the tool to connect to real LG server over internet. We have to create SMALL SERVER on our own system and redirect tool to this webpage.
FIRST DOWNLOAD YOUR OWN OFFICIAL KDZ (LG ROM) FILE FROM MY ROM COLLECTION PAGE or from anywhere and proceed...
0) Precautions:
___A) Select "Debugging Mode" as ON (Ticked) in Phone Settings (Developer Section)
___B) Select "Install from Unknown Sources" as ON (Ticked) in Phone Settings (Security Section)
___C) Indian version of L9 does not come with "Lookout Security Antivirus" already installed. But KDZ from other countries may have it already installed, FORCE CLOSE AND UNINSTALL it from app manager. If you cannot uninstall, at least DISABLE it. This program is known to be preventing connection and rooting of device.
___D) Remove all other USB devices (external hdd, backup drives, other phones, etc) and cables connected to PC to avoid issued due to voltage loss. (example)
___E) OFFLINE KDZ FLASHING DOES NOT LOOSE PHONE DATA, BUT YOU MUST BACKUP YOUR PHONE IN ANY CASE.
1) Find NOTEPAD program from StartMenu of Windows and Right Click on it and run it with "Run as Administrator" option. Remember use "Run as Administrator" while opening, otherwise you will not be able to save it after changes.
Now you need to open "HOSTS" file located in folder "C:\Windows\System32\drivers\etc\" with following method.
Click File Menu >>> Open File >>> Now copy-paste following in "Open File" Box.
C:\Windows\System32\drivers\etc\hosts
Click to expand...
Click to collapse
Please note the opened file name is only "hosts" and does not have file-extension like txt or anything.
When file is opened, add following lines at bottom of "hosts" file, a file with no extension like txt/doc/xls.
127.0.0.1 csmg.lgmobile.com
127.0.0.1 csmgdl.lgmobile.com
Click to expand...
Click to collapse
Now SAVE file and Close it.
Content of Hosts file looks like this sample file. Close this file , because we may not need it after this point.
AND RESTART PC NOW (check if lines are still there after Restart. They should be there.)
2) INSTALLING SMALL SERVER: Download "shttps.zip" (attached below) and Extract the Zipped folder "shttps" in root of C-drive of your computer.
Now Right click on "C:\shttps\http.exe" file and "Run As Administrator" and in Windows Compatibility Mode with "WindowsXP SP3" (must for Win7/8) , a server status window will open "MINIMIZE IT BUT DONT CLOSE IT" and you will also see a SMALL SERVER icon in TASKBAR, like mentioned below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WEBSERVER TESTING: If webserver is running correct, YOU SHOULD SEE A SWEET GIRL WITH L9 WHEN YOU CLICK THIS >>> http://127.0.0.1:9002
If you don't see a GIRL, something is wrong. Start again.
COMING TO ACTUAL FLASH PROCESS.
3) Download (attached) and Extract "KDZ_FW_UPD_EN.zip" and save the folder on desktop or any suitable place on your hard-disk.
4) Optional if "MSXML 4.0 SP3 Parser" is already installed before: Install it by finding and installing "msxml.msi" file in flash folder.
5A) Optional if "B2CAppClient" is already installed before: Internet Must be ON and Right-Click on B2CAppSetup.exe and Run As Administrator. If not installed before, it will download a setup file, will install it and open "LGMOBILE SUPPORT TOOL" box as shown below. Without doing anything just close this box because we will install latest LG Universal Android driver manually in next step.
5B) Optional if "LG Android USB Driver" is already installed before: Install latest "LG USB Driver (Download 4.0.4 here)" Remember your Phone is not connected yet.
NOW YOU ARE ALL SET AND READY TO FLASH
6) Never installed JellyBean before and with Locked Bootloader? Then Connect Phone in Software Upgrade Mode: Switch OFF the phone and Press VolumeUP button and insert USB cable into phone, Now phone should show SW Upgrade Mode.
Let windows load any drivers, wait until it finishes. TWO ENTRIES SHOULD APPEAR IN DEVICE MANAGER IF DRIVERS ARE PROPERLY INSTALLED, LIKE THIS SCREENSHOT or this screenshot. (ignore detected entries in following screenshot, they will be different every time)
Post-JB issue: If you have installed JellyBean before, Phone may not go in "Software Upgrade Mode" or Flashing stops at 14% in 11th step.
Then do this WORKAROUND: Keep the Phone POWERED ON with USB connected and on "LG Software" mode and do next step of flashing KDZ with Update tool and the phone will automatically go in software upgrade mode.
Click to expand...
Click to collapse
7) Execute "UpTestEX_mod2_marwin.exe" with "Run As Administrator" option and in Windows Compatibility Mode with "WindowsXP SP3" (must for Win7/8) >> and Select your KDZ file. Select "3GQCT" in Type of Flash and select "EMERGENCY" for PhoneMode. Ignore all other options and press "NORMAL WEB UPGRADE TEST" at bottom. This button is very light and hard to see at first attempt.
IMPORTANT: Do not change names of the KDZ files from LG server or downloaded from my this and this page. (They should look like.... "V10G_00.kdz" or other version in same style.)
8) Now "Read Phone Information" box will open with blank information, Just press "Upgrade Start"
9) A small box at bottom-right side may appear like below, which you may "ignore" or "cancel"
10) Now "Select country and language" small box will open. Here select "Different Country" and "English" and press "OK".
11) Now actual flashing will start and PHONE UPDATE TOOL (shown below) will appear, and if your KDZ file is good flashing will end without any issue.
JUST RELAX!! SIT BACK WITH HANDS FOLDED BEHIND HEAD AND WATCH IT HAPPENING.
When it finishes full flashing and phone will start rebooting.
YOU CAN REMOVE CABLE AFTER 100%, AND FLASHING IS FINISHED!!! Close all programs.
FLASHING ERROR AT THIS POINT? If you have installed JB before then your flashing may stop at 4% to 14%. This may be due JB rom already installed before or due to driver not completely installed for "SW Upgrade Mode".
WORKAROUND: Cancel flashing by exiting LG Update Tool. Phone should be still in SW Upgrade Mode, Remove USB Cable, wait 10 seconds, Insert USB cable again and let all drivers install for this mode. The device manager should look LIKE THIS SCREENSHOT. START AGAIN FROM STEP 6 (Read about Post-JB Issue)
Click to expand...
Click to collapse
BOOTLOOPS? STUCK AT LG LOGO? : Dont worry!!! If you were on CM and flashed JB or vice versa or your data partition is not matching with new partitions, then your phone may get BOOTLOOPS on LG Logo.
HARD-RESET to solve it (Press VolDown, Home and Power all together) You will loose data, dont worry, before starting you took BACKUP and I am sure about it. Phone should start normally. (Click for correct method of HARDRESET)
You're done!!! Phone is FLASHED!!!
12) Remove lines we added from HOSTS file mentioned above. Do it now!!! Dont complaint later that LG KDZ download links are not working. LOLZ
IMP NOTE: This is also called OFFLINE FOTA and all your Phone Settings, DATA on internal card and external card and also the installed APPLICATIONS will remain as it is. Enjoy!!
TROUBLESHOOTING, IN CASE OF ANY ISSUES: Check following workarounds.
Uninstall LG Driver, RESTART PC and then REINSTALL DRIVER before connecting phone to pc.
Run B2CAppSetup.exe and let it download and install LG Support Tool. After it opens just close it because it will not be needed later.
After Adding lines in HOSTS file, confirm if file is saved or not and then RESTART PC to see the added lines are there or not. This is to be done after first step is done.
Sometimes the downloaded file could be corrupted too. Do fresh download when your internet connection is good.
"Microsoft Security Essential" (Antivirus+Firewall) falsely recognizes "C:\shttps\http.exe" as virus (false alarm) and blocks it. Either allow it to execute or Get RID of this Antivirus.
....and try again with next procedure.
Also Visit Post Number 3 for FAQ with more queries.
-------------------------------------
B) Root Rootable KDZ with OLD Bin4ry method.
Second Post ...
-------------------------------------
Download from Mirror Links
1) https.zip (dev-host server link)
Please do not follow this OLD ROOTING GUIDE as I have written NEW ROOTING GUIDE for...
Easiest Rooting + Unlocking of LG L9 [Bye Bye Fastboot] by CMahendra
Rooting is possible directly from phone. Tested and 100% working!
http://forum.xda-developers.com/showthread.php?t=2779985
==============================================================
Before we start please remember, Use information at your own risk.
Click to expand...
Click to collapse
Rooting ICS ON LG OPTIMUS L9 (OLD BIN4RY METHOD) Only for ICS.
Thanks to Bin4ry who gave us this FIRST Working L9 Rooting Method.
1) Download and Flash Rootable ICS KDZ: It is known that this Root works on V10A for all L9 Models. Root works on V10C on P765. Root works on V10E on P769 (No Rom available, V10E comes from factory). Root works on V10A of P768.
At the moment Rooting does not work on higher versions of Roms, hence you will need to downgrade by flashing Rootable KDZ. Find Download Links of Rootable KDZ in this thread and please read related information carefully. This tutorial was made after testing with Indian V10C KDZ for P765.
2) Download "RootBinary.zip" (attached) and Extract to D-drive on your pc. You will find a new Folder "D:\RootBinary" and some files inside it.
3) Precautions:
___A) Select "Debugging Mode" as ON (Ticked) in Phone Settings (Developer Section)
___B) Select "Install from Unknown Sources" as ON (Ticked) in Phone Settings (Security Section)
___C) Indian version of L9 does not come with "Lookout Security Antivirus" already installed. But KDZ from other countries may have it already installed, FORCE CLOSE AND UNINSTALL it from app manager. If you cannot uninstall, at least DISABLE it. This program is known to be preventing connection and rooting of device.
4) Install Drivers "LG USB Driver (Download 4.0.4 here)"
5) Connect Phone to PC with USB in "MTP" mode, let all drivers install for detected hardware items, then in "Charge Only" Mode, let all drivers install, then in "PTP" mode and let all drivers install, LASTLY connect in "LG SOFTWARE" Mode and let all drivers install. (confirmed by this user too)
(Installing drivers in MTP, PTP and Charge Only is necessary, it does not take too much time. Just do it. It may save your time, as your rooting process will not stop for any unknown reason at any point)
6) Keep phone in "LG SOFTWARE" Mode and wait until it is connected. Now at this moment Device Manager should show 3 entries like this. If not, flashing will not work.
7) Now Open "Command Prompt" on pc with "RUN AS ADMINISTRATOR" option. (Type cmd in startmenu and when "command prompt" appears, right click on it and run it as Administrator)
8) Type "D:" and Press Enter key. And then type "CD \RootBinary" at Command Prompt and enter in directory, to show "D:\RootBinary>" in command prompt where your root files are present.
9) This is optional but its good to check if your Phone is connected to PC or not. Always better to confirm it. Type following command in command prompt box "stuff\adb devices" (all lower case) and press enter. Now Command Prompt should show the line showing the Device ID of connected device. (see image)
10) Now type and enter main rooting command "RUNME" (executes RunMe.bat) and then Select 1 for Normal Mode Rooting. Now look at Phone you will be asked if you want to RESTORE DATA, press "RESTORE MY DATA" button on Phone.
11) The Phone will reboot twice automatically and that is normal, press key on computer when prompted
12) YOU WILL SEE A LINE SAYING YOUR PHONE IS ROOTED. Go and check in phone app list, if icon of "SuperSU" is present or not. If yes you are ROOTED (Now install CWM in next step).
SIMPLE TEST: When you install and open (run) AdAway, then SuperSU will stop you and ask for permission to open. VOILA!!! Thats the sign of rooted android. Its done! Enjoy
13) IMPORTANT: Above only plain rooting and does not install CWM (ClockWorkMod). Now you need to install CWM Recovery Installer by Artas182x to use CWM.
ALL SCREENSHOTS ADDED.... Please check all carefully.
PROBLEM? If Bin4ry's rooting file is not working then, you can try same by replacing with Zanakorus33's Batch file, instead of "RunMe.bat" file by Bin4ry. Thanks to Zanakorus33 and Mingkee.
FAQ: Frequently Asked Questions
-------------------------------------------
Q) Even after fresh flashing or when any experiment goes bad, you may see following DEAD ANDROID with Red Triangle and exclamation mark over its body. What to do?
Workaround A) You may think, you have just killed it, but HEY, Wait, Relax. Even I got this issue when I flashed Prada Apk for CWM and then reflashed.
FORCE SWITCH OFF: First press Power Button for 10 seconds, phone will turn off, like laptops turn off with same trick. Then restart phone and see if it starts normally. If no then you need to do hard reset as mentioned below.
HARD RESET: Remove the Battery and insert it after few seconds. And now do the 3 button HARD RESET. First press VOLUMEDOWN and HOMEbutton. Then Press Power button only for 3 seconds and release power button but dont release VolDown and Home button and KEEP BOTH PRESSING until you see a Bigger Green Standing Android and circulating Molecular structure above it. DONE! Your Android should boot now and will be back in action. ALL DATA AND APPS WILL BE WIPED, BUT HEY IT GETS ITS LIFE BACK and LIFE'S GOOD.
Workaround B) You might have issue with bootloader or CWM installation error, JUST FLASH KDZ AFRESH and you will again see above screen after finishing, Just Repeat Workaround A, hard-reset it immediately. (I had to do this at least thrice, and everytime it came back ) Thats why they call it, LG DEVICES ARE UNBRICKABLE. A completely ignored feature which wins above all.
-------------------------------------------
Q) What is KDZ? Sorry I am first time on XDA with new LG Phone.
A) Welcome to XDA, Like we install Windows XP or 7 on pc, every phone needs Operating System too to function. Phones also need this OS and its Drivers to be installed and functioning. The OS files here are generally called "FIRMWARE" or "ROM" files. The company LG bundles whole OS, Drivers and other supporting files and applications, into one single huge file and they gave it a file-extension name as "KDZ". The regular updates of OS are also released by manufacturers either via download or directly in device via 3G or WiFi which is also called FOTA (Firmware Over The Air). Here in this thread we are talking about flashing (clean install) of the KDZ on phone, which should actually be done by LG Service Centres only and not us. But well these days everyone is doing that with the help of helpful tips and apps given by experts on XDA. Hope some things are clear here.
Size of KDZ file: Generally KDZ files for LG L9 are around 480+MB to 600MB for ICS version. For Optimus 2x the KDZ file is around 300MB (GB) to 600MB (ICS). Hope this helps too.
-------------------------------------------
Q) Well, I could successfully Root my phone, but how to install CWM?
A) Working CWM 6.x by Artas182x is here. Read instructions carefully.
-------------------------------------------
Q) After installing CWM by Artas182x, how to go Recovery Mode (in CWM menu)? Could not go by pressing Power button while pressing VolumeDown. (Why LEDS on phone blink rapidly while rebooting phone?)
A) That method is wrong for CWM. The correct method is Switch On phone with single power button and release it. When LG logo appears in a moment LEDS start blinking, quickly press and release VolDown button, you will be now in CWM menu.
-------------------------------------------
Q) After Rooting on V10C, can I update to latest ROM, keeping device ROOTed?
A) Not directly by upgrading via OTA (Air). BUT YES at some extent you can do it for some models. There is a thread by me with Collection of Rooted CWM Backups for various models. Read thread carefully for details. While writing this (on 24-Feb) I am on Rooted P765V10G due to the CWM Backup sent by another user DarkFable.
-------------------------------------------
Q) How to start L9 phone in SW Upgrade Mode and connect to PC?
A) Connect USB cable to PC but do not connect to Phone. If phone is on, Switch it OFF. While Pressing VolumeUP button and insert USB cable into phone and keep pressing the button, let windows load any drivers (if required), wait until it finishes. Phone will show SW Upgrade Mode screen (SEE IMAGE) and you can release the button.
-------------------------------------------
Q) I am not able to Root my P765/P768/P769/P760? What could be wrong?
A) Everything to ROOT L9 is available in this thread, read carefully and do as instructed.
This tutorial was made after successful and easy flashing of India V10C Rom and Rooting P765 on it. You can find download link from second post above for matching V10A for your variant. You can download and flash roms released for other countries too, as most of them will have English (US) as a common language.
A user could Root P760V10A and using Voodoo, updated to [V10E on OTA] and Restored Root with V10E. Will not work with offline flash method.
-------------------------------------------
Q) Can we OverClock L9?
A) I have not tried but yes, someone already did OVERCLOCKED L9 to 1.3GHz here. http://forum.xda-developers.com/showthread.php?p=34192656
-------------------------------------------
Q) Where can I find official KDZ ROM for flashing for my device?
A) You can visit my OFFICIAL ROM LINKER page , enter your IMEI and find your own latest ROM available to Download. Works for any LG Android SmartPhone. Or you can visit this page for old Official KDZ for any device any country.
-------------------------------------------
Q) What if I HARDBRICK my phone and it never recover back?
A) According to this post, one of our L9 expert artas182x who says, "For now our L9 is unbrickable, because we haven't got access to recovery.img and boot.img and we can try many methods to port CM9 or CM10 without hard brick." And that is fact, so lets relax at the moment.
-------------------------------------------
Q) How to extract bootloader (boot.img) and recovery (recovery.img )_from any phone or KDZ?
A) There is very good procedure explained here by AngryWolf80. Please read and click THANKS button for him.
EDIT: Worked perfect on PC with ADB SHELL. (Hint: Give "su" command first)
-------------------------------------------
Q) How to Run As Administrator? Where we find this command?
A) Please Google it. (trust me someone asked me this recently, well good news, not on xda )
-------------------------------------------
Q) How to start Service Menu (Hidden Menu) on L9?
A) To use Service Menu or Hidden Menu type 3845#*760# and call you will get Service Menu. This example is for 760, but you can enter 765 for P765 and so on. Dont actually mess with options as these are serious commands used by qualified service center engineers. Some options are easy to understand but most are not. So be careful and don't say I did not warn you if you lose network permanently.
-------------------------------------------
Q) How to use DLNA of L9? (How to use L9 as Media Storage Device)?
A) I created one more Tutorial for DLNA connection of L9, here.
-------------------------------------------
Hope this helps.
Other workarounds
[Q] Accessing adb on soft bricked lg l9 or hard reset
cmahendra said:
Reserved for FAQ
Click to expand...
Click to collapse
great work, but i do this tutorial for root in my LG p765 from indonesia and its not work. The phone wont restart after i click restore.
My phone has already had 10c when i was buying it. Or i must install 10c kdz from the link you gave it?
thanks before:good:
dimasdanu said:
great work, but i do this tutorial for root in my LG p765 from indonesia and its not work. The phone wont restart after i click restore.
My phone has already had 10c when i was buying it. Or i must install 10c kdz from the link you gave it?
thanks before:good:
Click to expand...
Click to collapse
May be its stopping saying "Permission Denied Are you root?" I am not sure. But please also see step 4 (newly added).
Firstly, as we both have P765, it should work with INDIA V10c link. But as you say its not working, I may help if you clearly mention where it fails with what message? and with what circumstances? May be you are missing some link or driver issue or small server issue. We will come to know only if you give clear picture, may be with screenshot.
I will also recommend you to try ROOTing on V10b and V10a of INDONESIA/INDIA, if possible. Well at the moment we all are still at experiment level. So Good Luck.
please help!
have an lg p769, 10e. was rooted, tried the recovery image/ cyanomod apk posted in the other thread. (for the prada?)
**SECURITY ERROR**
phone will not get past first splash screen (LG, SECURITY ERROR)
cmahendra,
followed all your steps in this guide (GREAT job, by the way!) but when kdz is supposed to say: 'check your internet line' 'continue' or 'cancel' it only says: 'check your internet line' 'restart' or 'cancel'
selecting cancel stops the process. selecting restart only shows the message again.
windows selector is on. small http is installed and adjusted (9002). edit hosts short cut is edited. kdz and shttp in root directory. s/w upgrade screen able to show on phone. lg s/w upgrade tool able to recognize phone and current software installed on it (when shttp is off).
please please please help! i really love this phone's potential and REALLY don't want to pay to get a new one.
rob419 said:
have an lg p769, 10e. was rooted, tried the recovery image/ cyanomod apk posted in the other thread. (for the prada?)
**SECURITY ERROR**
phone will not get past first splash screen (LG, SECURITY ERROR)
cmahendra,
followed all your steps in this guide (GREAT job, by the way!) but when kdz is supposed to say: 'check your internet line' 'continue' or 'cancel' it only says: 'check your internet line' 'restart' or 'cancel'
selecting cancel stops the process. selecting restart only shows the message again.
windows selector is on. small http is installed and adjusted (9002). edit hosts short cut is edited. kdz and shttp in root directory. s/w upgrade screen able to show on phone. lg s/w upgrade tool able to recognize phone and current software installed on it (when shttp is off).
please please please help! i really love this phone's potential and REALLY don't want to pay to get a new one.
Click to expand...
Click to collapse
same here im having the utmost issues getting my phone back on can you help us dude?
ok one thing that was missing after all the hassle was the automatic offline procedure which you must run with command prompt after setting the hosts up and turing on the server as well you must start the windows enabler as a administrator attached is the missing file just rename it without the .txt to use it in command prompt
alienngp said:
ok one thing that was missing after all the hassle was the automatic offline procedure which you must run with command prompt after setting the hosts up and turing on the server as well you must start the windows enabler as a administrator attached is the missing file just rename it without the .txt to use it in command prompt
Click to expand...
Click to collapse
alright, alienn, refresh my memory real quick... how do i rename the txt file? F2/menu rename/properties all just keep it as .txt. 'save as...' doesn't seem to do it, either. dragging it into cmd just gives up a 'will not work, blah blah' result.
and is this anything like the other automatic offline post I saw?
thanks either way, though
alienngp said:
ok one thing that was missing after all the hassle was the automatic offline procedure which you must run with command prompt after setting the hosts up and turing on the server as well you must start the windows enabler as a administrator attached is the missing file just rename it without the .txt to use it in command prompt
Click to expand...
Click to collapse
The vbs file does whole process automatically, but some people had issues with path and other things. This guide is complete manual and transparent process with no chance of mistakes.
PS: please delete my whole huge OP you have quoted in your post, which was not necessary. I see no point in repeating whole thing when your point is easily understandable.
Sent from my LG-P765 using xda app-developers app
rob419 said:
and is this anything like the other automatic offline post I saw?
thanks either way, though
Click to expand...
Click to collapse
This is not automated offline fix via visual basic script. This is pure and transparent manual step by step guide. Hope u could use it.
Once you did it and understood, next time you only need to run http.exe and start flashing. No other step required.
Sent from my LG-P765 using xda app-developers app
WOW L9 Friends.
Expect some good news in next few days. I somehow managed to get Admins to pay attention for L9 subforum through a moderator we know from O2X forums in PM. Posting in that subforum request thread did not help us.
But now hopefully very soon L9 subforum will start. I may not be sure but I am positive about it.
Sent from my LG-P765 using xda app-developers app
cmahendra said:
WOW L9 Friends.
Expect some good news in next few days. I somehow managed to get Admins to pay attention for L9 subforum through a moderator we know from O2X forums in PM. Posting in that subforum request thread did not help us.
But now hopefully very soon L9 subforum will start. I may not be sure but I am positive about it.
Sent from my LG-P765 using xda app-developers app
Click to expand...
Click to collapse
You are the **** ive scowared the far ends of the web for weeks on this phone i almost gave up on it .im rooted now just waiting for the roms if its not too much trouble for you can you shoot me a PM on where to look out for the roms? Or shoot me one if you need a test subject
andrewp916 said:
You are the **** ive scowared the far ends of the web for weeks on this phone i almost gave up on it .im rooted now just waiting for the roms if its not too much trouble for you can you shoot me a PM on where to look out for the roms? Or shoot me one if you need a test subject
Click to expand...
Click to collapse
giving up is not good thing in life. we are also rooted and waiting for roms.
anyways please share the place to look out for the roms. thanks in advance on behalf of whole L9 community.
right now im trying to fix my device i used a european kdz and now my screen calibration is all out of wack i have a p769 and all im having is issues any ideas?
alienngp said:
right now im trying to fix my device i used a european kdz and now my screen calibration is all out of wack i have a p769 and all im having is issues any ideas?
Click to expand...
Click to collapse
Would it be possible you think to have something with your same model dump the system root and you use what you need to copy over misconfigurations? I have the same model but would need to know exactly it is you would need duplicated
i need a full rom replacement as i have the p769 i would need the full thing so i could get my phone back up and running just the problem is how to make a backup of your rom
as there is no kdz for american models
alienngp said:
i need a full rom replacement as i have the p769 i would need the full thing so i could get my phone back up and running just the problem is how to make a backup of your rom
as there is no kdz for american models
Click to expand...
Click to collapse
If your LG phone have IMEI (lolz ), you can try my ROM LINKER PAGE and no matter whatever country it was sold, you will get exact latest UnRooted Official Rom. To clean all the previous workaround or leftover signature, you should do HARD RESET either before or after flashing.
they didnt have mine thats why im having so much trouble
alienngp said:
they didnt have mine thats why im having so much trouble
Click to expand...
Click to collapse
Send your imei in PM , it's strange why you don't get your Rom with that. And yes it's not mandatory that you should flash Rom.from your country only. You are from USA then you can flash almost any Rom as US English is common in all.
Sent from my LG-P765 using xda app-developers app
Hello all,
I have googled, and searched forums high and low to no result so I thought i'd ask.
I recently purchased "KVD APOLLO ONE K6589 Quad-Core Android 4.2.1 WCDMA Smartphone w/ 5.5"
Im new so I can't post external links, however if you go to google or deal extreme and search, you'll find it easy enough.
The phone itself was next to nothing ($180) so even if its Unrootable, I'm not too fussy.
I would however prefer it rooted, I have read that you can basically use the MTK6577 rooting tool on the device?
Would this risk bricking the device.
I'v attempted to contact the manufacturer however to no avail! This is a rather new model so I know im being a tad impatient but if anyone can help then please do
Thanks guys
Potentional Tutorial
philipkroberts said:
Hello all,
I have googled, and searched forums high and low to no result so I thought i'd ask.
I recently purchased "KVD APOLLO ONE K6589 Quad-Core Android 4.2.1 WCDMA Smartphone w/ 5.5"
Im new so I can't post external links, however if you go to google or deal extreme and search, you'll find it easy enough.
The phone itself was next to nothing ($180) so even if its Unrootable, I'm not too fussy.
I would however prefer it rooted, I have read that you can basically use the MTK6577 rooting tool on the device?
Would this risk bricking the device.
I'v attempted to contact the manufacturer however to no avail! This is a rather new model so I know im being a tad impatient but if anyone can help then please do
Thanks guys
Click to expand...
Click to collapse
philipkroberts said:
Hello all,
I have googled, and searched forums high and low to no result so I thought i'd ask.
I recently purchased "KVD APOLLO ONE K6589 Quad-Core Android 4.2.1 WCDMA Smartphone w/ 5.5"
Im new so I can't post external links, however if you go to google or deal extreme and search, you'll find it easy enough.
The phone itself was next to nothing ($180) so even if its Unrootable, I'm not too fussy.
I would however prefer it rooted, I have read that you can basically use the MTK6577 rooting tool on the device?
Would this risk bricking the device.
I'v attempted to contact the manufacturer however to no avail! This is a rather new model so I know im being a tad impatient but if anyone can help then please do
Thanks guys
Click to expand...
Click to collapse
Also looks like im getting the Star N9589 just due to the more support available.
Anyhow until then, failing any answers from here, another chinese forum a spanish one and Yahoo answers I am going to go with the following method, If it dies, It dies this was my own fault for not doing enough research and at least it lets others know. I would send it back to DX But cba with postage fees and the hassle;
THIS IS DONE AT YOUR OWN RISK! -
APOLLO ONE - MTK 6589 K6589
Please note all tools and zip files mentioned I cant link to yet should you feel you want them please post in this thread and I will PM you, Gotta get my post count up first!
Guide by philipkroberts Twitter @philipkroberts
Revision 1 - People to be added to credits for leehed source, currently untested, concept only
Before anything try and boot into any form of recovery mode and backup if possible!
DISABLE UAC in WINDOWS 7
RIGHT CLICK RUN AS ADMIN ON ALL FILES
ALLOW NON TRUSTED DRIVER INSTALLATION (Google this if unsure)
On the phone install anububu on pc phone. - See what model it detects as and note it down.
Run MTK DROID TOOLS and connect phone see if drivers After a few seconds, the box should turn blue, and it should say "Apollo ONE or Other Name " besides it. The drivers are working.
If not try the other drivers in the drivers folder using device manager, there are many tutorials for this I cba typing one im so tired! and make sure you have the only trusted drivers thing turned off, if you constantly get unknown driver then your out of look and wil have to try and source some yourself.
Win7 (This method has not been tested by myself. Confirmation required.)
HOW TO MANUALLY INSTALL ANY DRIVERS IF NEEDED
a - Downloading This tool Called EASYBCD
b - Use it to restart your computer in advanced boot mode. (PRESSING F8 WHILST BOOTING UNTIL YOU GET THE OPTION FOR Disable signed driver enforcement)-Must be done everytime you wanna root a phone with this method.
c - Follow instructions and disable SDE.
d Manually install drivers, if above did not work (Yellow sign issue)
e Navigate to control panel - > Hardware and Sound - > Device Manager
f You should see a driver notice with a yellow warning sign next to it.
g Right click on it and choose "Update driver..".
h- Manually assign drivers, usually the choice furthest down.
i- In the window which should have appeared, navigate to the preload/Mt6590 folder and press OK.
j- If SDE is turned off, you should see a red warning window. This is normal, just accept the message prompted.
k- The drivers should now be successfully installed.
l - Once this is done open C:\Users\Hate\Desktop\Chinese Droid Rooting\MTKROOT TOOLS\Root_with_Restore_by_Bin4ry_v28\runme.bat Hope it ****ing works if so your rooted, If not try this next few steps, AGAIN at your own risk, no need to format just continue from here.
THE FOLLOWING STEPS ARE FOR THE STAR S5 - SAME PROCESSOR BUT NO GARUNTEE. DO NOT FOLLOW THESE STEPS UNLESS YOU ROOTED ANOTHER WAY AND NOW JUST WANT TO INSTALL A CWM
THE FOLLOWING STEPS ARE FOR THE STAR S5 - SAME PROCESSOR BUT NO GARUNTEE. DO NOT FOLLOW THESE STEPS UNLESS YOU ROOTED ANOTHER WAY AND NOW JUST WANT TO INSTALL A CWM
THE FOLLOWING STEPS ARE FOR THE STAR S5 - SAME PROCESSOR BUT NO GARUNTEE. DO NOT FOLLOW THESE STEPS UNLESS YOU ROOTED ANOTHER WAY AND NOW JUST WANT TO INSTALL A CWM
THE FOLLOWING STEPS ARE FOR THE STAR S5 - SAME PROCESSOR BUT NO GARUNTEE. DO NOT FOLLOW THESE STEPS UNLESS YOU ROOTED ANOTHER WAY AND NOW JUST WANT TO INSTALL A CWM
0 - Use PC to copy UPDATE-SuperSU-v.1.25.zip to the root of SD CARD, do not unpack just leave whole zip there.
1 - Turn off your phone, remove your battery. (Do not connect your phone to the computer yet!)
2 - Navigate to the "SP Flash Tool" folder, and run the tool.
3 - On the right side of the tool, there should be a button, iconed with a folder, named "Scatter-Loading". Click this.
4 - Navigate to the "Yulypis Recovery" folder, and double-click on the "Mt6589_Android_scatter-emmc.txt".
5 - You should be back at the SP Flash Tool start-screen, and there should have appeared a list of text and hex-codes.
6 - The "Recovery" line, should be ticked off, and preloader should be red.
7 - Now, click on the button named "Download", with a blue arrow on it. Press "YES" on the NOT ALL images has been correctly loaded warning.
8 - Connect your phone to a USB 2.0, with removed battery. The program should now work, and if drivers is set up correctly, the 0% will turn 100% and a green circle will appear in the middle of the screen. If your phone disconnects before the flashing tool is able to recognize your device, try putting the battery back into the phone before running SP Flash tool. Additionally, if this doesn't work, try using different drivers in the drivers folder
9 - Disconnect your K6589 from the computer when you see the green circle, insert the battery and boot the phone. Wait for it to get to the start screen.
11 - Installing SuperSU through Yulypis recovery
12 - Run "MtkDroidTools.exe" from the folder.
13 - Connect your device, and after a few seconds, information about your device should appear.
14 - Click on reboot, on the mtkDroidTools start-screen, and choose "..recovery".
15 - If recovery has been properly flashed, your device will now enter Yulypis recovery. Blue, with english text.
16 - Controllers: "Power = Enter, Initialize", "Volume down = Scrolling down". (Don't remember if volume up was bugged or not)
17 - Enter "Install zip from SDcard" - > Navigate to the earlier copied "UPDATE-SuperSU-v.1.25.zip and initialize it by pressing the power button.
18 - Follow the on-screen instructions, and it should be prompted to install after 1-2 more screens.
19 - Reboot the device by clicking on "+++++back+++++" and "Reboot now / Reboot Device".
Either way I am going to smash this in a week or so when the phone arrives from DX and will keep people update.
Peace
Please I want to buy this phone. Can you answer me a few doubts I have?
- How is the viewing angle? Cause i purchased a tablet from china and the angle is very bad.
- Has proximity sensor?
Are you ok with the phone?
thank you.
cabrote said:
Please I want to buy this phone. Can you answer me a few doubts I have?
- How is the viewing angle? Cause i purchased a tablet from china and the angle is very bad.
- Has proximity sensor?
Are you ok with the phone?
thank you.
Click to expand...
Click to collapse
I'm still awaiting the phone, hence why that guide is at your own risk.
However from what I have been told and gather that should root the phone no problems.
As for custom roms, I wouldn't even bother trying!
Once the phone gets here I will test my tutorial and re-write it into a more easy on the eyes fashion.
Thanks
http://www.fastcardtech.com/APOLLO-ONE-K6589?u=37825
They sell the phone, for an extra $3 they root before sending.
It cant be that hard, I'd love to know someone in that factory!
I'm looking for a link to download the full stock firmware for this device.
Anyone, please?
...or at least a firmware dump from a non-modified working phone.
One could use MTK Droid Tools and SPFlash to perform this task easily.
PM me for assistance if you need it.
Thank you.
Hey Guys,
So I just bought a brand new ZTE V5 Max and upon receiving found out that it didn't have GAPPS installed which I heaily use those apps so I went down the route of figuring out what was needed to install GAPPS. Please keep in mind I'm writing this to help fellow users of this phone so they don't have to go through the teadious research and chinese translations, I will not be held accountable for anything that goes wrong with your device when doing the below process, I just know it worked perfectly fine for me:
Step 1: Enable Debugging Mode
Head to Settings > About Phone > tap Build Number 8 times or something > Now go Back to settings and tap More > Developer Options > Enable USB Debugging.
Step 2: Install Drivers
Plug in your phone and install the AutoRun.exe that appears in the virtual CD drive (shows up when youplug the phone in)
Once you have installed the drivers verify in Device manager that all devices relating to the phone are installed and there's no unknow devices.
Step 3: Root the Phone and install CWM (Chinese Version sorry but the bits that are needed have english written )
Download the Rooting and Custom Recovery tool here -- drive.google.com/file/d/0B8qJPucQA8GkQy1uTk93dUNuMkE/view?usp=sharing
Unzip and double click on the ZTE-V5-MAX-TOOL.exe
It should come up and ask for a password enter the following (no spaces in the password had too due to XDA posting rules) - www . ydss . cn
Now select Option 2 which is the Root option
Now the tool will detect the phone and press any key and it'll reboot (my computer installed more drivers at this point and I had to close the rooting tool window, reboot the phone and start again, once again selecting option 2)
Now it should proceed through the rooting process.
At the end it'll try and install a chinese verison of the Root Checker tool mine failed which is ok.
It then display Sucess.
Now at this point I rebooted the phone and installed a Root Checker to validate that I did have Root acess and I did, you can proberly skip this step.
I then fired up the Rooting tool again but this time selected option 3 which will install the Custom Recover CWM
Once again press any key and it will begin installing the custom recovery
Once complete you should see sucess.
Reboot the Phone and go to Settings > About Phone > System Updates > Recovery and it should boot to Recovery CWM if it does yay.
Step 4: Installing Gapps
Reboot the phone
Install ES File Explore and give it Superuser Access
Now go to the uper directoy and tap and hold on the System folder then view the details.
You'll need around 150mb free space in there to be able to install GAPPS, I had to install an app called "Uninstall" (red coloured trash can). I then uninstalled the following : Easy Mode, Handbook (as it's chinese), neoshare, nubia Niudun, Nubia PlatLogo, Nubia Poster and Video Sample.
I then had enough room.
Now download Micro Gapps (Go to drive.google.com/folderview?id=0B1T7tp6tJ_3kQkZSWjNsazJZbGc&usp=sharing
Then click on "1.10 update_gapps" then "pa_gapps-modular-m" and download it. Then put it in the root directory of you Phone Storage.
Now reboot into recovery (Settings > About Phone > System Updates > Recovery)
Go to the second Option in Recovery called "***** Zip**) and browse to the phones storae and install the Zip.
If sucessfull go back to the main menu of Recovery and go down to the (****Cache**) option and select, then select it again to confirm.
Once complete go back to the Main menu again and choose the top option to reboot.
Walla your done.
Website I for info: shuajizhijia.com/jiaocheng/9170.html&prev=search then use translate in Google.
Have fun guys.
Have fun guys, and keep in mind I probaly wont reply if you ask for help as I have a day job
Now select Option 2 which is the Root option
Now the tool will detect the phone and press any key and it'll reboot (my computer installed more drivers at this point and I had to close the rooting tool window, reboot the phone and start again, once again selecting option 2)
Now it should proceed through the rooting process.
At the end it'll try and install a chinese verison of the Root Checker tool mine failed which is ok.
It then display Sucess.
Now at this point I rebooted the phone and installed a Root Checker to validate that I did have Root acess and I did, you can proberly skip this step.
I then fired up the Rooting tool again but this time selected option 2 which will install the Custom Recover CWM
Click to expand...
Click to collapse
Hi m8, I'm still waiting for my phone, seems it will take a wile, as I don't have confirmation yet of shipping.
Now, I was reading what you posted above and I have to thank you for the mini tut, but I marked in red two lines that I'm quite confuse... Can you confirm that please?
Hey Mate,
I've fixed that up now good pickup
Cheers Eric
i got my phone with root without cwm
and found that playstore didnt worked, it has 4.4.4 version
any suggest?
Simply Skip these steps:
Now select Option 2 which is the Root option
Now the tool will detect the phone and press any key and it'll reboot (my computer installed more drivers at this point and I had to close the rooting tool window, reboot the phone and start again, once again selecting option 2)
Now it should proceed through the rooting process.
At the end it'll try and install a chinese verison of the Root Checker tool mine failed which is ok.
It then display Sucess.
Now at this point I rebooted the phone and installed a Root Checker to validate that I did have Root acess and I did, you can proberly skip this step.
very very useful
Dear Frenchie
I would like to express my sincere thanks for your magnificent manual
It has been very very extremely truly helpful for me
I can't express how much I feel grateful for you, this solved a problem that ruined my life
The manual is very accurate and detailed
Thanks very much
unable to add google account
Hi, I have just received my new ZTE Max 5 and I've spent all evening trying to set up my google account. The phone has google play store installed but I cannot install any apps because I cannot establish my google account. Every time I try to set up the account it says "there was a problem communicating with google servers". Any ideas? (I have disabled 2 google 2 step verification).
Can't turn on my phone
Hi, so I was trying to root my ZTE V5 Pro and when i reached the step where it was suposed to root itself, it reeboted and the computer stopped recognizing it. I tried rebooting it several times and restoring its fabric data but it doesnt pass the first screen. It can't open /dev/tty0 because there is no such file or directory. Can anyone please help me?
patseho said:
Hi, so I was trying to root my ZTE V5 Pro and when i reached the step where it was suposed to root itself, it reeboted and the computer stopped recognizing it. I tried rebooting it several times and restoring its fabric data but it doesnt pass the first screen. It can't open /dev/tty0 because there is no such file or directory. Can anyone please help me?
Click to expand...
Click to collapse
You said you have the "ZTE V5 Pro". Maybe that is just a typo, but this thread is about the "ZTE V5 Max", so be careful about what you do.
You can try looking at this post and see if it is helpful to you: http://forum.xda-developers.com/and...alcom-2-gb-t2965623/post63005167#post63005167
But you must make your own assessment and take responsibility for the outcome if it is not the right thing to do for your phone.
I just want the GAPPS zip File.
Hi, everyone, I recently got an old demo Wing and decided to try seeing if I could remove the software restrictions (charge limit, etc). I originally intended to use it as a media device, but after successfully flashing retail firmware found that it could be used as an actual phone! I pieced this together using a bunch of posts and guides for various phones, but figured I'd share what worked for me here. I've only tested the unlocked Korean firmware on my unit, though others have supposedly used Verizon or T-Mobile firmware.
REQUIREMENTS:
Android Debug Bridge (ADB)
LG Mobile Driver (select universal)
LGUP terminal flash
Firmware - I used the Korean unlocked linked here, but in theory any KDZ for the Wing should work.
Before starting, uninstall the retail mode app and sign out of any google accounts on the device.
REMOVING DEMO MODE:
NOTE: This section should probably work on most recent LG demo devices. If it works for you, please let me know!
Step 1: Install the LG mobile driver on your computer.
Step 2: Extract the contents of the ADB .zip file.
Step 3: Power on the phone and enable developer mode. It's the same as any other phone (go to Settings > About > Software Info and tap on "Build Number" until it says "You are now a developer!), however you may be prompted for a password. The default password is L310MC570G.
Step 4: In the developer options, enable USB debugging.
Step 5: Connect the phone to your computer. Make sure that it’s set to “charge only” and not “media sync” or anything else in the notification. It should prompt you to allow your computer to access the phone for debugging when you connect it.
Step 6: On your computer, open a terminal in the ADB folder. Type ".\adb.exe devices" (no quotatations) and the phone should show up in there. If that works, type ".\adb.exe shell"
Step 7: Enter the command "am start -S com.android.settings/.Settings\$DeviceAdminSettingsActivity" to open the Device Administrators menu. Uncheck Retail Mode.
Step 8: Enter the command "pm uninstall -k --user 0 com.lge.retailmode" to remove retail mode.
Step 9: Restart the phone and you should be good to go. This doesn't remove the charging limit or cellular restrictions, but it removes most of the annoying demo stuff.
FLASHING:
NOTE: This is for the LG Wing only. Some devices like the Velvet may work, but others (such as the V60) reportedly brick if you try to flash stock firmware. Attempt at your own risk.
Step 1: Install the LG mobile driver on your computer if you haven't already.
Step 2: Extract the LGUP flash utility and place it in your C:\ directory. Ensure the filepath is C:\LGUP-FLASH-Utility\[Contents of folder], otherwise it will not work.
Step 3: Copy your firmware (.kdz) file to the LGUP-FLASH-Utility folder.
Step 4: Put your phone into download mode. To do this, power off the phone and connect it to your computer while holding the volume up button.
Step 5: Run LGUP-FLASH-Utility.exe.
Step 6: Pick option 1. Find the COM port number the phone is using- the program and documentation should indicate which you need.
Step 7: After finding this, press enter to return to the menu and select option 2.
Step 8: Enter the port number again. Don't type "COM," just the port number itself.
Step 9: Follow the prompts to select the proper file. You'll need to type the full name.
Step 10: If all goes well, the program should start flashing the firmware. Leave it be until the program says it is complete, even if it appears to boot into Android. It will take approximately 5-10 minutes.
Step 11: If all goes well, you should now have a much more usable LG Wing. Disconnect and enjoy!
What works:
-SIM card/modem (data, call and text all work fine)
-Full battery capacity
-Unless it's in the other section, it's safe to assume it probably works!
What doesn't work:
-Fingerprint sensor
Other notes:
-The Korean firmware is what I flashed, and it works fine. However, this post seems to indicate that you can flash the stock Verizon firmware and then T-Mobile firmware. I haven't tested this.
-There's an error when starting the phone, but it doesn't affect its functionality.
-At times, I've had SMS/calling stop working, but toggling airplane mode on and off seems to fix it.
Edit: Changed firmware link to the exact file I used (F100N11b_00_COM_KR_OP_0119.kdz)
Edit 2: I've been using this phone for around 2 months now as my daily driver with no major issues since flashing the stock firmware
Ok but how can i uninstall the demo mode app at the first place? The guide is interesting but i guess you should include that as well
Thankyou-_- said:
Ok but how can i uninstall the demo mode app at the first place? The guide is interesting but i guess you should include that as well
Click to expand...
Click to collapse
There's a bunch of guides online you can follow, but I've added how to do this to the post.
So i was successfully able to remove the demo mode, but when i try to flash using LGUP (after doing all the steps) it shows "Flash done" but nothing changes
Any idea what's wrong? I downloaded everything from this guide
Thanks in advance
Thankyou-_- said:
So i was successfully able to remove the demo mode, but when i try to flash using LGUP (after doing all the steps) it shows "Flash done" but nothing changes
Any idea what's wrong? I downloaded everything from this guide
Thanks in advance
Click to expand...
Click to collapse
Double check that your files are extracted in the proper place. The LGUP-FLASH-Utility folder should be in your C: directory and the files should be inside it. It should look something like this (I'm using Windows 11, but the folder layout should be the same).
gd243 said:
Double check that your files are extracted in the proper place. The LGUP-FLASH-Utility folder should be in your C: directory and the files should be inside it. It should look something like this (I'm using Windows 11, but the folder layout should be the same).
View attachment 5421117View attachment 5421115
Click to expand...
Click to collapse
Now I'm facing another problem
"Dll isn't installed properly..."
Any ideas what should I do?
I tried to uninstall and install again but no luck
I really appreciate your help
Thankyou-_- said:
Now I'm facing another problem
"Dll isn't installed properly..."
Any ideas what should I do?
I tried to uninstall and install again but no luck
I really appreciate your help
Click to expand...
Click to collapse
Odd. Looks like you've done everything right otherwise. I'm not sure what could be causing the DLL error- try completely reinstalling everything (driver, redownload + install the flash utilty, etc), or even try it on a different computer. You might have to experiment a bit and change a few things to see what works.
gd243 said:
I used the Korean unlocked linked here
Click to expand...
Click to collapse
There are three types of firmware for three korean cellular networks: KTF, SKT and LGT. Which one did you choose?
georgiadiy said:
There are three types of firmware for three korean cellular networks: KTF, SKT and LGT. Which one did you choose?
Click to expand...
Click to collapse
The exact firmware file name was F100N11b_00_COM_KR_OP_0119.kdz
Starting now the download but amazing post!
I don't have a Demo wing *yet* but there's a chance at getting some at work
If someone wants to try this, go for it, as this worked on a Google Pixel 6 Pro Android 12 that was MDM locked
If you can enable USB debugging, enable it, plug into your computer, use ADB to disable Google Play Services, go to user profiles and create a second profile, use that profile, enable Play Services and the device works with no MDM/Demo restrictions
Yo, thanks for putting this together man! This is huge! I was able to flash mine and get it working. I figured out you can get an IMEI in the service menu (for development purposes only) I'm on the Korean firmware that you listed in the guide, but I want to try and get it on the TMobile firmware since that's the carrier I have and I want to see if it will have wifi calling. I wasn't able to flash the TMobile file the other day but I will try a few other firmwares and see what I can do. I noticed on the Korean one, you can't update through settings and I'm not sure why. This thing will be totally legit if I can get it on the newest TMobile firmware with wifi calling and OTA updates for when the wing gets android 11. The last thing we need is to figure out how to get the fingerprint scanner working!
mikewolski said:
Yo, thanks for putting this together man! This is huge! I was able to flash mine and get it working. I figured out you can get an IMEI in the service menu (for development purposes only) I'm on the Korean firmware that you listed in the guide, but I want to try and get it on the TMobile firmware since that's the carrier I have and I want to see if it will have wifi calling. I wasn't able to flash the TMobile file the other day but I will try a few other firmwares and see what I can do. I noticed on the Korean one, you can't update through settings and I'm not sure why. This thing will be totally legit if I can get it on the newest TMobile firmware with wifi calling and OTA updates for when the wing gets android 11. The last thing we need is to figure out how to get the fingerprint scanner working!
Click to expand...
Click to collapse
Let me know if you make any progress! I've also been trying to get T-Mobile on mine, but so far no luck.
I saw someone said something about resetting the finger print sensor to have it work. It turns on on mine but doesn't scan. I can't find the post now about "resetting it". Its like the discussion threads on this topic were deleted
KaptinBoxxi said:
I saw someone said something about resetting the finger print sensor to have it work. It turns on on mine but doesn't scan. I can't find the post now about "resetting it". Its like the discussion threads on this topic were deleted
Click to expand...
Click to collapse
I think you're referring to this post.
OP says that you can go to the hidden menu (#*462633*#100#) and go to SVC Menu > Fingerprint > Enable. The thing is, that doesn't exist on the Wing. The only thing I see in SVC Menu is Handprint > HandID Logging on/off. Because that setting only deals with logging, it obviously doesn't enable the optical fingerprint scanner. After poking around in the service menu some more, I haven't been able to find any other way of enabling it.
The only thing of some significance OP mentioned was a way to test the the fingerprint scanner. You can go to Device Test > SAAT > Service Menu - Manual Test > Optical FingerPrint Test and go through the test from there. Every time I run it, the test fails and I get the following results:
Exposure Time: PASS
Bad Block: FAIL
Finger Effect Area: FAIL
Signal: PASS
Noise: FAIL
M-Facotry: PASS
Data Save: FAIL
OP said that if it fails after enabling it that means it worked. That doesn't make much sense though.
Hopefully some day soon we'll be able to get this sensor working.
twocans said:
I think you're referring to this post.
OP says that you can go to the hidden menu (#*462633*#100#) and go to SVC Menu > Fingerprint > Enable. The thing is, that doesn't exist on the Wing. The only thing I see in SVC Menu is Handprint > HandID Logging on/off. Because that setting only deals with logging, it obviously doesn't enable the optical fingerprint scanner. After poking around in the service menu some more, I haven't been able to find any other way of enabling it.
The only thing of some significance OP mentioned was a way to test the the fingerprint scanner. You can go to Device Test > SAAT > Service Menu - Manual Test > Optical FingerPrint Test and go through the test from there. Every time I run it, the test fails and I get the following results:
Exposure Time: PASS
Bad Block: FAIL
Finger Effect Area: FAIL
Signal: PASS
Noise: FAIL
M-Facotry: PASS
Data Save: FAIL
OP said that if it fails after enabling it that means it worked. That doesn't make much sense though.
Hopefully some day soon we'll be able to get this sensor working.
Click to expand...
Click to collapse
Its entirely possible we don't have the fingerprint scanner at all. Demo devices, they sometimes leave hardware out of them. Samsungs are usually missing modems
Other thing I'm confused by... My IMEI is 0. I've seen people say, including this post, that mobile data and such work after doing this
KaptinBoxxi said:
Its entirely possible we don't have the fingerprint scanner at all. Demo devices, they sometimes leave hardware out of them. Samsungs are usually missing modems
Other thing I'm confused by... My IMEI is 0. I've seen people say, including this post, that mobile data and such work after doing this
Click to expand...
Click to collapse
That is very true too. But based on the fact that the demo units have the functioning 5G modem and the full 256GB of storage, it would honestly surprise me if they didn’t have a functioning scanner.
As for the IMEI, I’m assuming those people have changed the default IMEI and generated a new one. Based on other discussion threads on XDA, it appears to be frowned upon / illegal in some countries to discuss how to change the IMEI. All I can say is that it is possible, just hidden. If you’ve gotten to the point that you’re modifying a demo device like this, you’re probably the type that’s willing to poke around menus you’re not supposed to be in, so it shouldn’t be too hard to figure it out.
twocans said:
That is very true too. But based on the fact that the demo units have the functioning 5G modem and the full 256GB of storage, it would honestly surprise me if they didn’t have a functioning scanner.
As for the IMEI, I’m assuming those people have changed the default IMEI and generated a new one. Based on other discussion threads on XDA, it appears to be frowned upon / illegal in some countries to discuss how to change the IMEI. All I can say is that it is possible, just hidden. If you’ve gotten to the point that you’re modifying a demo device like this, you’re probably the type that’s willing to poke around menus you’re not supposed to be in, so it shouldn’t be too hard to figure it out.
Click to expand...
Click to collapse
Oh I've poked around lol but even this tutorial states "data worked after flashing" which mine didn't, which is why I asked
I know with normal LGUp Tool, you can do PDM and modify the IMEI, or you can do ChipErase via LGUp_CMD but I can't figure out how to do optional commands with lg cmd since it doesn't really tell you and no one online seems to have a tutorial for anymore than the basics of
Code:
lgup_cmd com DLL KDZ
options go at the end, but doesn't seem to matter what I put there
Hey, thanks so much for putting this together! I'm running into an issue where it says to do a ChipErase D/L. Any ideas?
firefurby said:
Hey, thanks so much for putting this together! I'm running into an issue where it says to do a ChipErase D/L. Any ideas?
View attachment 5455955
Click to expand...
Click to collapse
This is due to the firmware you're flashing. For the demo conversion, you have to do the Korean firmware first, then to do something like Verizon, you need the LGUP 1.16 tool from my other post, use ChipErase in that tool and it'll flash just fine. You have to wipe the partition that checks variation, which is what chip erase is for