Related
Ok, so I'm kinda new to the whole rooting, recovery, etc, but after successfully rooting my phone last week, I felt like trying to do something simple like putting on Community Rom or a different boot-up animation. I followed this thread for Community Rom:
http://forum.xda-developers.com/showthread.php?t=1053567
Which then references other links to download the files necessary to flash the Community Rom to the Fascinate. Problem is, I cannot get 'Update.zip' from this link:
http://forum.xda-developers.com/showthread.php?t=1046855
The update.zip link goes to a 404 not found page, so I can't finish the rest of this.
What I have done so far is installed ODIN on my PC and flashed Clockworkmod, though its not the same one I see referenced on XDA....the filename is
"cwm-recovery-ALL-3-30-FIX". Would this make an difference at all? I got it on my phone and it works when I boot into recovery, but it gives the stock blue screen and not the CWM screen (which I understand should be red) and I guess this is because I don't have Update.zip or something, so I can't flash anything using CWM at the moment.
I did find an 'update.zip' file somewhere (I really don't remember where now), and I put this on the root of my sdcard, but when I go into record and select 'Apply sdcard/update.zip' it shows that it's trying to do something (a progress bar moves across the screen very quickly), but then I get a triangle with an exclamation mark inside and the Android underneath it and nothing else happens. I left it for at least 5 mins and still nothing happened. The only way I can get back to the phone normally is to pull the battery out, put it back in and reboot the phone from the stock recovery.
Can someone help me out? Do I have a crap 'Update.zip' file and if so where do I get a good one from?
My specs for my phone are:
Hardware ver. I500.04
Firmware ver. 2.2.1
Basband ver. S:i500.04 V.ED01
Kernal ver. 2.6.32.9
Build number: SCH-I500.ED01
Odin the CWM recovery, boot to recovery, flash CommROM. That's all you need to do
Sent from my SCH-I500 using XDA App
Ok, I guess I'm kinda confused now. I already have CWM on my phone. Are you saying that I should use Odin to put the version of CWM on from here and I won't need update.zip?
Update.zip is not needed, the cwm replaces the stock recovery in the phones flash memory
Sent from my SCH-I500 using XDA Premium App
You already have cwm on your phone and the recovery 3-30 file is fine, download comm rom and it put on the root of your phones sd card (ie.not in a folder)...if you download it right from your phone it will be in a file that your downloads will be in..most likely tapatalk download, download, or downloads... the point is you want to be able to find it easily.boot into recovery and
Do a factory data reset, also wipe cache, and go to advanced and wipe dalvik cache . After doing those three things locate the comm rom file and install..reboot and enjoy!
If you did odin recovery and then did not flash anything the stock kernel will re write recovery and you will have to re-odin recovery again...so if I were you I would....odin recovery...put the batt back in, three finger boot into cwm flash your rom and or kernel and done
Sent from my SCH-I500 using XDA App
efan450 said:
You already have cwm on your phone and the recovery 3-30 file is fine, download comm rom and it put on the root of your phones sd card (ie.not in a folder)...if you download it right from your phone it will be in a file that your downloads will be in..most likely tapatalk download, download, or downloads... the point is you want to be able to find it easily.boot into recovery and
Do a factory data reset, also wipe cache, and go to advanced and wipe dalvik cache . After doing those three things locate the comm rom file and install..reboot and enjoy!
If you did odin recovery and then did not flash anything the stock kernel will re write recovery and you will have to re-odin recovery again...so if I were you I would....odin recovery...put the batt back in, three finger boot into cwm flash your rom and or kernel and done
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Maybe that's what happened then, I used Odin to put CWM on, but didn't flash anything after that. I'll go ahead and try again and see what happens.
So, why does everyone say you need update.zip all the time after you Odin CWM on the phone?
toledospod said:
Maybe that's what happened then, I used Odin to put CWM on, but didn't flash anything after that. I'll go ahead and try again and see what happens.
So, why does everyone say you need update.zip all the time after you Odin CWM on the phone?
Click to expand...
Click to collapse
You use to have to use update.zip but that is not the case anymore...and since you didn't flash anything after recovery you will have to re-do it, so if u did not already download the com rom file you will have to boot up...download comm rom...(i recommend the one with the otb kernel because you can overclock and undervolt with the voltage control app), pull the batt, odin recovery...that 3-30 recovery file is what works for me, put the batt back in and boot directly into recovery at this point I would suggest going to backup and restore and doing a nandroid back up btw power button is accept and menu button is go back...this willsave your phone exactly like it is now just in case things get screwy you will have a point to go back to ( but do not try to restore that back up in the future with out first disabling the voo doo lag fix) after your nandroid is done ,wipe data/cache/dalvik, navigate to wherever your comm rom zip is...install reboot and done...this process will take a few minutes and it's important to be patient...if you are fully stock as if right now you will hear a robotic lady saying stuff as your phone boots up...this is all normal and what you want to hear..once it reboots you can start playing around and setting it up the way you like it
One more suggestion is to use titanium backup and back up all of your apps prior to flashing and after your flash just restore all the apps...not data..i also export all of my contacts to the sd card not g mail cause I've lost contacts before so I just export to sd..flash and import them..that's what works for me...good luck..happy flashing!
Sent from my SCH-I500 using XDA App
Thanks efan, that worked perfectly this time. I now have Comm Rom on my phone and like you said, didn't need update.zip at all.
Edited as I thought I was having problems after with Android Market, but its fine now.
So, disclaimer. I'm an idiot today. Don't mind me.
So today I decided to go to jt's CM7 from ComRom 2.1 (non gingerbread)
Backed up everything, made a nandroid, wiped everything installed cwm 3.x.
Went and started to flash CM7. That didn't exactly like me too much as it went into a 45min long bootloop saying that it failed. No big deal. Nows the fun part. Rewiped everything, started to reinstall the ComRom. That didnt like me either, it says that it cannot mount Cache/recovery/log etc. So I thought. Okay, well I can always ODIN!
Ideas folks?
Thanks in advance.
Sorry about the bump/post, forgot to edit this one instead.
OK! Ignore above, used odin so now im on stock eb01 but still when i use odin to flash cwm 3.0.2.8x it still says it cannot open or mount cache/recovery/log and recovery/last_log.
At this point, I just want to get it so I can nandroid back to where i was on comrom.
Ideas?
What I did, ODIN the atlas2.2 and ebo1 Froyo package, boots up to stock fine no problem.
Attempted to flash CWM 3.0 in ODIN. flashes fine.
3 finger salute. doesnt boot, have to hold it for about a second then cwm just pops up saying it cant mount recovery.
Then I re ODINd eb01, deleted all voodoo, cwm, update.zip etc from sdcard.
re tried to flash cwm 3.0
same thing.
Completely lost haha
New ; odin's dl09, OTA'd up to current. What steps should I take next given my issues with CWM?
By deleting the file named clockworkmod on your sd card, you most likely deleted all of your nandroid backups. unless you backed up you sd card to your computer, im pretty sure they are gone. Im sorry. As far as the rest of your problems... I know a stock kernal will overwrite clockworkmod every reboot.
schu9120 said:
By deleting the file named clockworkmod on your sd card, you most likely deleted all of your nandroid backups. unless you backed up you sd card to your computer, im pretty sure they are gone. Im sorry. As far as the rest of your problems... I know a stock kernal will overwrite clockworkmod every reboot.
Click to expand...
Click to collapse
I did back up everything, made sure of that haha. So I should try reflashing a kernal? or would that have been included in the ODIN package/ OTA updates I did?
Thanks
tkirane said:
I did back up everything, made sure of that haha. So I should try reflashing a kernal? or would that have been included in the ODIN package/ OTA updates I did?
Thanks
Click to expand...
Click to collapse
there may have been a kernel in the ota updates, the problem us you need a non stock kernel..stock ones over write recovery in every boot
My suggestion....
odin eb01 with the atlas 2.2pit and repartition checked.
Fully boot after eb01 flash
Odin cwr 3-30-all and immediately three finger boot into cwr....wipe everything
Flash cm7 build 7/4 completely reboot
Use the power menu to access recovery...this time it will be cwr 4.x.x.x flash the
Cm7 build your want with no wiping, thats what works for me
Sent from my SCH-I500 using XDA App
efan450 said:
there may have been a kernel in the ota updates, the problem us you need a non stock kernel..stock ones over write recovery in every boot
My suggestion....
odin eb01 with the atlas 2.2pit and repartition checked.
Fully boot after eb01 flash
Odin cwr 3-30-all and immediately three finger boot into cwr....wipe everything
Flash cm7 build 7/4 completely reboot
Use the power menu to access recovery...this time it will be cwr 4.x.x.x flash the
Cm7 build your want with no wiping, thats what works for me
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I believe I attempted that last night at home, I will definitely try again after I am out of work. Would you happen to have a link to download of cwr 3-30-all?
Also, would I be correct in the assumption that same steps would apply to ComRom installation.
Also too, I am currently on the ED04 non-rooted stock OTA. Do same rooting methods that I used way back on dl09 still apply?
Sorry for the multiple idiotic questions, just much different this time around do to the inability for CWM (either 2.5 or 3.0) to be able to locate/mount the cache/recovery/log.
Would that have to do with Root? thats my main concern is getting into CWM for it to say it cannot mount. After this point I have it reboot system and it does not boot up again. It boots into CWM immediately. So it is unable to bot back into the actual phone mode. So then I reflash dl09 or eb01 in ODIN and start over.
tkirane said:
I believe I attempted that last night at home, I will definitely try again after I am out of work. Would you happen to have a link to download of cwr 3-30-all?
Also, would I be correct in the assumption that same steps would apply to ComRom installation.
Also too, I am currently on the ED04 non-rooted stock OTA. Do same rooting methods that I used way back on dl09 still apply?
Sorry for the multiple idiotic questions, just much different this time around do to the inability for CWM (either 2.5 or 3.0) to be able to locate/mount the cache/recovery/log.
Would that have to do with Root? thats my main concern is getting into CWM for it to say it cannot mount. After this point I have it reboot system and it does not boot up again. It boots into CWM immediately. So it is unable to bot back into the actual phone mode. So then I reflash dl09 or eb01 in ODIN and start over.
Click to expand...
Click to collapse
rooting has no effect on wheather or not recovery (cwm) sticks, its the stock kernel that is overwriting it as soon as you boot. com rom 2.0 comes with a kernel in the flash so if you do this exactly you'll be on comrom rooted with recovery
The steps for going to com rom would be the same this method may be overkill but it should get you cleared up....you said you odin'd ebo1 and the atlas pit before in your previous post,so im going to assume you know how to properly get into download mode and what do, and not do in odin, so down load cwr 3-30-fix all here, and save it on your pc in your odin folder
http://forum.xda-developers.com/attachment.php?attachmentid=556634&d=1301538947
download com rom (ukb) 2.0 either from your phone or from your pc, connect your usb cord and move it to the root of your sd card.(ie.not in a folder)
pull the battery,and odin the ebo1 tar with the atlas 2.2 with repartition checked, when its done insert batt and boot fully.
when done pull batt, odin cwr 3-30-fix all, when done insert batt and right away hold volume up, down, and power and continue to hold until your see the red cwr screen.
wipe data(factory reset)/wipe cache/go to advanced and wipe dalvik
go to install zip from sd, and find the comrom ukb zip and select install...when its done select reboot and done...at this point your phone will look like its not doing anything and its important to be patient you will hear the voodoo lady talking to you and this is good, when your phone fully boots hit the power button and select recovery and at the recovery screen go to backup and restore and select nandroid backup and run it, when its done reboot and enjoy
if you want to go to ukb 2.1 just download the patch, boot into recovery and flash, no wipe needed.
as a side note the 3-30 file you odined will not be your recovery after this is complete because comrom comes with its own recovery, after you get on to this rom the recovery that came with it will be the one you see.
i used these same steps to go to cm7 but i have only had success by, odin cwr 3-30 fix all, wipe everything and then install build date 7/4 and reboot completely, and power menu to recovery and flash the 7/13 build.
efan450 said:
rooting has no effect on wheather or not recovery (cwm) sticks, its the stock kernel that is overwriting it as soon as you boot. com rom 2.0 comes with a kernel in the flash so if you do this exactly you'll be on comrom rooted with recovery
The steps for going to com rom would be the same this method may be overkill but it should get you cleared up....you said you odin'd ebo1 and the atlas pit before in your previous post,so im going to assume you know how to properly get into download mode and what do, and not do in odin, so down load cwr 3-30-fix all here, and save it on your pc in your odin folder
http://forum.xda-developers.com/attachment.php?attachmentid=556634&d=1301538947
download com rom (ukb) 2.0 either from your phone or from your pc, connect your usb cord and move it to the root of your sd card.(ie.not in a folder)
pull the battery,and odin the ebo1 tar with the atlas 2.2 with repartition checked, when its done insert batt and boot fully.
when done pull batt, odin cwr 3-30-fix all, when done insert batt and right away hold volume up, down, and power and continue to hold until your see the red cwr screen.
wipe data(factory reset)/wipe cache/go to advanced and wipe dalvik
go to install zip from sd, and find the comrom ukb zip and select install...when its done select reboot and done...at this point your phone will look like its not doing anything and its important to be patient you will hear the voodoo lady talking to you and this is good, when your phone fully boots hit the power button and select recovery and at the recovery screen go to backup and restore and select nandroid backup and run it, when its done reboot and enjoy
if you want to go to ukb 2.1 just download the patch, boot into recovery and flash, no wipe needed.
as a side note the 3-30 file you odined will not be your recovery after this is complete because comrom comes with its own recovery, after you get on to this rom the recovery that came with it will be the one you see.
i used these same steps to go to cm7 but i have only had success by, odin cwr 3-30 fix all, wipe everything and then install build date 7/4 and reboot completely, and power menu to recovery and flash the 7/13 build.
Click to expand...
Click to collapse
I definitely know my way around odin and recovery haha thank you very much for the help. I'll try it out once I am out of work and let you know how it goes. I was doing just that only with cwr 3.0 not the fix all. so hopefully that does the trick. Hopefully I wont be seeing and mount cache errors.
So I did use the recovery-all last night to no avail, still says that it cannot mount certain items.
I have to three finger salute it, then let go after a while for it to boot to CWM, then it cannot mount cache:recovery/command and recovery/log and dev/block/st111
Also when trying to wipe data it cannot mount datadata
Then I do reboot system now and it reboots to CWM with same errors.
EDIT : Found an ODIN for EC01 ComRom 2.0
Going to try that out and see what happens.
I'm an idiot. I realized I kept ODIN'ing pit with CWM, aka, BAD idea. All fixed and running.
Thanks everyone!
tkirane said:
I'm an idiot. I realized I kept ODIN'ing pit with CWM, aka, BAD idea. All fixed and running.
Thanks everyone!
Click to expand...
Click to collapse
Lol glad to hear your up and running...I've had my share of idiotic moments and lucky our phones are pretty brick proof...and now we can add to the list that using a pit file and trying to odin cwr while it won't allow your phone to work..... you can still recover even from this with out perma-bricking!
Sent from my SCH-I500 using XDA App
So how can I fix this?
My screen looks exactly like this and it doesn't give me a chance to flash cyanogenmod from the sd card.
I think my problem is similar to what is stated here: http://androidforums.com/galaxy-s-all-things-root/248433-stuck-install-default-apk-file-using-rom-manager-photo.html
Do I need a new kernel? Where would I find one of those..
Thanks for the help!
From what I can tell your first problem is that your in 3e recovery. I would recommend odening back to 2.1 eclair then get root access and then flash CWM. this was the best method for me
Sent from my SGH-T959 using xda premium
One little exception though
fear676 said:
From what I can tell your first problem is that your in 3e recovery. I would recommend odening back to 2.1 eclair then get root access and then flash CWM. this was the best method for me
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
First just boot it back up and go back to that screen you posted, then re-install the packages, might need to do it twice, if that doesn't work then do a fresh install of JFD again and follow the instructions listed below, you just haven't re-installed the packages yet to get your CWM recovery green screen yet!!
Do what he says, but untick the reboot in odin, so you will have manual control of that, REASON WHY is so you can use the 3E recovery menu to clear data/reset to factory and then wipe the cache, these two things alone if not done account for alot of locking or boot looping during first initial start after a fresh flash, and is the reason why the OP's suggest to always wipe and clear, so as to remove Ghosts from the prior SW and not corrupt the data, and or especially mess with the BLdr's
Also make sure to root the phone first after your fresh install of JFD, before you install Rom Manager, then flash CWM.
Also when you go to CWM recovery the first time to re-install packages, sometime you have to do it twice, and usaully the 2nd time will get you to your green menu , and then your in business to start the process of Modding with the flavors around here!!
Ok, I made a schoolboy error and think I have softbricked my phone.
I just got it this morning and have rooted it through ODIN. I was going to install a ROM but when in recovery I went and used the Superwipe app and then rebooted (don't ask) and it is now stuck on the Samsung logo screen. I can boot into recovery but of course no backup as its been wiped.
I am downloading a Stock Official and going to install through ODIN. I assume this is the right way to getting back to stock and starting again to unsoftbrick my SIII?
Its the first time I have ever arsed up. Its not nice lol
Haizum74 said:
Ok, I made a schoolboy error and think I have softbricked my phone.
I just got it this morning and have rooted it through ODIN. I was going to install a ROM but when in recovery I went and used the Superwipe app and then rebooted (don't ask) and it is now stuck on the Samsung logo screen. I can boot into recovery but of course no backup as its been wiped.
I am downloading a Stock Official and going to install through ODIN. I assume this is the right way to getting back to stock and starting again to unsoftbrick my SIII?
Its the first time I have ever arsed up. Its not nice lol
Click to expand...
Click to collapse
Yup, as long as you can get to download mode, you can use odin and flash back to stock.
Haizum74 said:
Ok, I made a schoolboy error and think I have softbricked my phone.
I just got it this morning and have rooted it through ODIN. I was going to install a ROM but when in recovery I went and used the Superwipe app and then rebooted (don't ask) and it is now stuck on the Samsung logo screen. I can boot into recovery but of course no backup as its been wiped.
I am downloading a Stock Official and going to install through ODIN. I assume this is the right way to getting back to stock and starting again to unsoftbrick my SIII?
Its the first time I have ever arsed up. Its not nice lol
Click to expand...
Click to collapse
Yup enter in to download mode and flash it using ODIN everythin wil b fine I hav experienced the same problem so many times
Phew, I was panicking there. Thanks guys. Do I also need to download the seperate kernel and modem? Im coming from a Nexus S and didnt have these options
Haizum74 said:
Ok, I made a schoolboy error and think I have softbricked my phone.
I just got it this morning and have rooted it through ODIN. I was going to install a ROM but when in recovery I went and used the Superwipe app and then rebooted (don't ask) and it is now stuck on the Samsung logo screen. I can boot into recovery but of course no backup as its been wiped.
I am downloading a Stock Official and going to install through ODIN. I assume this is the right way to getting back to stock and starting again to unsoftbrick my SIII?
Its the first time I have ever arsed up. Its not nice lol
Click to expand...
Click to collapse
I have the exact problem as you,but I couldn't flash the stock rom for my country..via Odin
Don't bother with superwipe, just wipe data/factory reset in cwm and of you really feel the need you can format system under mounts and storage in cwm.
Just make sure you have something to flash already on your phone before you do, and don't reboot after formatting system.
Flashing stock via Odin will fix your problem now.
Sent from my GT-I9300 using xda premium
nodstuff said:
Don't bother with superwipe, just wipe data/factory reset in cwm and of you really feel the need you can format system under mounts and storage in cwm.
Just make sure you have something to flash already on your phone before you do, and don't reboot after formatting system.
Flashing stock via Odin will fix your problem now.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks. I dont usually format and have no idea why I thought it was a good idea to do it this time. I was going to mount internal storage through CWM and put the ROM on it but there was no option to mount it.
EDIT - All sorted. Thanks for the info
If you know how to use adb you could put the ROM on your sdcard through cwm.
Sent from my GT-I9300 using xda premium
Or if you're not comfortable with adb and got an external SD, put the external SD in your PC and transfer the cwm rom to that and flash it from external SD on your phone
if i helped-hit thanx
OK so Im on AOKP milestone 6 with the devil kernel and i went in to recovery to wipe cache and dalvik cache and when i pressed reboot system it goes back to recovery!!!! please help as I really don't want to reflash everything!!! Thanks.
I had this same problem until I flashed TWRP. When I rebooted, it instead loaded the OS, but it still had Devil Recovery. WTF?
Have you tried re-flashing the rom without wiping data?
Sent from my SCH-I500 using xda premium
I can't flash anything because i can't put anything on the sd card because i cant get out of recovery!
ThePlasticBling said:
I can't flash anything because i can't put anything on the sd card because i cant get out of recovery!
Click to expand...
Click to collapse
i have the same problem i cant get out of recovery, cause the rom i flashed is all screwed up
android_noob01 said:
i have the same problem i cant get out of recovery, cause the rom i flashed is all screwed up
Click to expand...
Click to collapse
Try flashing CWM recovery again using Heimdall or Odin. Once it boots into recovery, flash TWRP or another recovery of your choice, then reboot and hopefully you will see your boot animation. That's what I did to get AOKP build 40 to boot again (though strangely enough, it's stuck with Devil recovery even after flashing TWRP). Hope this helps you guys out. And be sure to make backups!
UndeadSquirrel said:
Try flashing CWM recovery again using Heimdall or Odin. Once it boots into recovery, flash TWRP or another recovery of your choice, then reboot and hopefully you will see your boot animation. That's what I did to get AOKP build 40 to boot again (though strangely enough, it's stuck with Devil recovery even after flashing TWRP). Hope this helps you guys out. And be sure to make backups!
Click to expand...
Click to collapse
Again, how can i put twrp on my sd card if i'm stuck in recovery? Is there a link for an odin version of twrp
You should be able to mount your SD card in recovery anyway. If not, take it out and insert it into an adapter to plug into your computer. I don't know if there's an Odin version of TWRP, I flashed it in CWM recovery.
I would read droid styles guide first if you have not yet as it has all the answers you will need. You just need to read through it and following the directions.
Sent from my SCH-R530U
how do i mount my sd card and open it on my pc in recovery?
If you're using CWM, it's under Advanced or Mounts and Storage. Plug in the USB cable like you normally would.
UndeadSquirrel said:
If you're using CWM, it's under Advanced or Mounts and Storage. Plug in the USB cable like you normally would.
Click to expand...
Click to collapse
I try to install twrp but it says installation aborted. I'm really starting to get sick of this phone and its stability issues.
You got the zip, right? It's in the Fascinate development section of the forums.
There is nothing wrong with the phone. I don't understand why you can't just Odin back to stock and start over. With the amount of time you have been stuck in recovery you could have fixed it by now. It you could follow droid styles guide to get out of the recovery loop without going back to stock. Something tells me you really just want a new phone...am I close???
Sent from my SCH-R530U
shelby04861 said:
There is nothing wrong with the phone. I don't understand why you can't just Odin back to stock and start over. With the amount of time you have been stuck in recovery you could have fixed it by now. It you could follow droid styles guide to get out of the recovery loop without going back to stock. Something tells me you really just want a new phone...am I close???
Sent from my SCH-R530U
Click to expand...
Click to collapse
Sent from my SCH-R530U
Don't you belong in a different section?
Anyway, sorry for getting snippy, I was just really tired and frustrated. I did use the .zip from the forums.
If you've already tried Heimdall-flashing CWM again, and that didn't work, then I suggest you Odin back to stock as shelby suggested. If you haven't made a nandroid already, do so, then revert back to stock and start from scratch. You can try restoring your nandroid once you're no longer stuck in recovery.
ThePlasticBling said:
Sent from my SCH-R530U
Don't you belong in a different section?
Anyway, sorry for getting snippy, I was just really tired and frustrated. I did use the .zip from the forums.
Click to expand...
Click to collapse
I have a mez and I just got the sgs3 a little while ago. You need to check out section 8 or 9 I think of the guide. It tells you exactly how to get out of your situation.
Sent from my SCH-I500 using Tapatalk 2
There's also a topic about the "three-finger recovery boot loop" fix. You could try that.