Related
I mean is this possible to overclock and undervolt stable our X10 with Snapdragon QSD8250 to....maybe 1.5Ghz? With Custom Kernel, or after fully unlock/crack bootloader? Please answer.
to 1.5ghz.....noway, its unstable as it is at 1.2ghz, so far the highest stable frequency is 1152 and mayb 1190.4ghz. the chipset we have cant really be highly overclockd without being really unstable and can damage the phone, i dnt think ny dev will even attempt to do this, even the desire which has same chipset isnt overclockd too much
Thx for answer dude, but one more - Desire have unlocked bootloader if I good hear, how much freq have Desires users?
BTW: I read long time ago that someone do 1.7 (??!!) Ghz for our X10, but it was very unstable, and thread disappear after ~20minutes. You know something more about it?
tobibravo said:
Thx for answer dude, but one more - Desire have unlocked bootloader if I good hear, how much freq have Desires users?
BTW: I read long time ago that someone do 1.7 (??!!) Ghz for our X10, but it was very unstable, and thread disappear after ~20minutes. You know something more about it?
Click to expand...
Click to collapse
it doesnt matter if its got a unlocked bootloader or not the chipset itself is not highly clockable it is a hardware limitation, ive jus seen most of them in desire development page dnt go above 1.2ghz, no i didnt hear abt the 1.7ghz and it probably didnt happen, the phone probably wud be dead in 5 minutes
tobibravo said:
Thx for answer dude, but one more - Desire have unlocked bootloader if I good hear, how much freq have Desires users?
BTW: I read long time ago that someone do 1.7 (??!!) Ghz for our X10, but it was very unstable, and thread disappear after ~20minutes. You know something more about it?
Click to expand...
Click to collapse
It disappeared because it was wrong.
It was due to an incorrect multiplier and was actually only running at 1152mhz
1228 is the highest anyone can reach without reboots. At this frequency there is a huge possibility of burning out your chip if you leave it there for long periods
supports the x10 Overclok and undevolt to (1113Mhz or 1228Mhz) spends the useful life of the cell
It is best to use stock kernel :S
to date non of the rom is actually stable.. with either OC or UV..
NipponGo said:
to date non of the rom is actually stable.. with either OC or UV..
Click to expand...
Click to collapse
Lol what? Z's cm7 with doomlords kernel is as stable as you can get...
There have been tons of other stable combos
Just because you don't know what you're doing doesn't make it unstable
NipponGo said:
to date non of the rom is actually stable.. with either OC or UV..
Click to expand...
Click to collapse
i disagree with that comment, i ran 2.1custom stock with a custom kernel running at 1.152Ghz undervolted for almost 3 months with no problems whatsoever
Thx guys, now I know everything I wanted ^^.
Hey guys,
I have just installed OmegaRom by Team Cooper and what a Rom it is!!! Amazing is an understatement.
Okay so with there new Rom v2, it has an OC kernal built in and it does work...BUT I need to know how to OC the thing safely and squeezing as much performance as possible!
I have it at 825 and min 806 mhz, scaler is performance.
What settings would you pro's recommened?
Thanks!
Edit 1- I am using SetCPU to OC.
"overclock" and "safe" cannot be use in the same sentence, it just wrong.
theres no safe overclocking. moreover each and every device is unique even for the same model.
what is working with others doesnt guarantee it'll works with yours.
an0nym0us_ said:
"overclock" and "safe" cannot be use in the same sentence, it just wrong.
theres no safe overclocking. moreover each and every device is unique even for the same model.
what is working with others doesnt guarantee it'll works with yours.
Click to expand...
Click to collapse
What I meant was a stable OC that may work with my phone... I OC computers too so I know the risk's involved. So what I was asking was what OC's worked with peoples phones so I could get a rough idea on how to govern my cpu and OC it without totally messing it up.
davalav said:
What I meant was a stable OC that may work with my phone... I OC computers too so I know the risk's involved. So what I was asking was what OC's worked with peoples phones so I could get a rough idea on how to govern my cpu and OC it without totally messing it up.
Click to expand...
Click to collapse
i hope u are aware of the ill effects of OCing.....battery takes a real beating....well i have done it upto 886 mhz....many others have done it upto 1ghz mark...but i personally do not recommend...
CPU Tuner
I try CPU Tuner, is similar ti setCPU but is free whit THE END 3.0 custom ROM and use the 864-254 mhz for screen on and 480-122 for screen off whitout problems, previously I use 904 mhz, but sometime it freeze...
Bye Pistaaa
sreesh87 said:
i hope u are aware of the ill effects of OCing.....battery takes a real beating....well i have done it upto 886 mhz....many others have done it upto 1ghz mark...but i personally do not recommend...
Click to expand...
Click to collapse
I have OCed it to 902 mhz..
Sent from my GT-S5830 using XDA App
Thanks for the comments guys... Gives me a rough estimate on its limits.
So far I have been running 844mhz performance for a while, since I created this thread and the battery has remained at 82%!
I have benched using AnTuTu twice and have excellent read and write speeds, compared to other benchies I have seen, OmegaRom is the best Rom I have ever used!
Cheers,
i tried cpufrills and its the best for me
I don't Think U mustuse over clocking,even my setting was min245 max 902,the effect just draining more battery,and if using to much can damaging ur prosessor
I know you might think what I'm going to write is unnecessary and going to contradict with your believes here. but I'm going say it anyway.
If you are going to use your device for a long time then I would suggest not to overclock too much. You'll know when something will go wrong with your over-clocking. Your SGA would start rebooting randomly. Heating up would be excessively common once you start overclocking, using your SGA while it's charging. Over clocking will definitely reduce your processor life span. People who do can over clock their device to get the max out of their device and know they're going to change the device in sometime later anyway.
Rushyang said:
I know you might think what I'm going to write is unnecessary and going to contradict with your believes here. but I'm going say it anyway.
If you are going to use your device for a long time then I would suggest not to overclock too much. You'll know when something will go wrong with your over-clocking. Your SGA would start rebooting randomly. Heating up would be excessively common once you start overclocking, using your SGA while it's charging. Over clocking will definitely reduce your processor life span. People who do can over clock their device to get the max out of their device and know they're going to change the device in sometime later anyway.
Click to expand...
Click to collapse
Don't worry! Like I said, I have experience O/C'ing processors etc and I know how bad the effects can be! I am not going for a massive overclock at all. Just a tiny bump in the speed. At the moment, I am running 825mhz and already the speed has improved dramatically. I may go a little further but 902mhz is a bit mental for my liking.
Pistaaa said:
I try CPU Tuner, is similar ti setCPU but is free whit THE END 3.0 custom ROM and use the 864-254 mhz for screen on and 480-122 for screen off whitout problems, previously I use 904 mhz, but sometime it freeze...
Bye Pistaaa
Click to expand...
Click to collapse
SetCPU is free for XDA members and it's the best one ever...period
http://forum.xda-developers.com/showthread.php?t=505419
Pistaaa said:
I try CPU Tuner, is similar ti setCPU but is free whit THE END 3.0 custom ROM and use the 864-254 mhz for screen on and 480-122 for screen off whitout problems, previously I use 904 mhz, but sometime it freeze...
Bye Pistaaa
Click to expand...
Click to collapse
setCPU is free to if you download it from the forum
I resently had a huawei ascend p1 running ics, and it was atleast as fast as my galaxy s2 running jellybean. i have tried to overclock alittlebit with no big difference. and people say the phone might get hot and so on. The ascend p1 i had has original dualcore 1,5 ghz prossessor,and never went hot.Why cant the s2 run more 1,5 instead of 1,2 ghz without being hot or buggy? THANKS!
tonymb91 said:
I resently had a huawei ascend p1 running ics, and it was atleast as fast as my galaxy s2 running jellybean. i have tried to overclock alittlebit with no big difference. and people say the phone might get hot and so on. The ascend p1 i had has original dualcore 1,5 ghz prossessor,and never went hot.Why cant the s2 run more 1,5 instead of 1,2 ghz without being hot or buggy? THANKS!
Click to expand...
Click to collapse
I read that some users oveclocked their SGS2 to 1,6 GHz.
But you need a kernel which supports such high oc and hope that your hardware is able to handle this CPU frquency too.
As I don't overclock my phone, you have to search a little bit on xda, SGS2 forum, original dev section for kernel and oc 1.6 GHz.
Good luck !
tonymb91 said:
I resently had a huawei ascend p1 running ics, and it was atleast as fast as my galaxy s2 running jellybean. i have tried to overclock alittlebit with no big difference. and people say the phone might get hot and so on. The ascend p1 i had has original dualcore 1,5 ghz prossessor,and never went hot.Why cant the s2 run more 1,5 instead of 1,2 ghz without being hot or buggy? THANKS!
Click to expand...
Click to collapse
All devices are slightly different. Some might be able to be oc a lot, some can't be at all. All depends on the phone.
And why do you need to oc? 1.2 is enough to run smoothly for almost everything. Unless you are playing the newest games...
Sent from my GT-I9100 using xda premium
kilometers4 said:
All devices are slightly different. Some might be able to be oc a lot, some can't be at all. All depends on the phone.
And why do you need to oc? 1.2 is enough to run smoothly for almost everything. Unless you are playing the newest games...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Have been using it at 1500ghz for a few days now,and the phone works smootly.. ive been running many tests like benchmark,browsermark and so on, and my phone even gets better result than the s3 when running at 1500ghz( witch i realy dont rely to). the batterylife is still as ****ty as before,so no big defference there. u ask why i want to overclock. i was hoping to get a faster phone by doing so,and i have a faster phone now. was just hoping it would bee a bigger difference. im running thunderbolt jellybean rom and overclocked at 1500 ghz, and works good and stable. just wounder if anybody knows if i should turn up the volts too, as i read some place thath higher ghz u also need higher volt. tried to turn up the volt but the phone froze. so ill be using it at standard volts and 1500ghz for now. works good dont think ill be changing this phone for a while,it works as god as any other phone out there.
tonymb91 said:
Have been using it at 1500ghz for a few days now,and the phone works smootly.. ive been running many tests like benchmark,browsermark and so on, and my phone even gets better result than the s3 when running at 1500ghz( witch i realy dont rely to). the batterylife is still as ****ty as before,so no big defference there. u ask why i want to overclock. i was hoping to get a faster phone by doing so,and i have a faster phone now. was just hoping it would bee a bigger difference. im running thunderbolt jellybean rom and overclocked at 1500 ghz, and works good and stable. just wounder if anybody knows if i should turn up the volts too, as i read some place thath higher ghz u also need higher volt. tried to turn up the volt but the phone froze. so ill be using it at standard volts and 1500ghz for now. works good dont think ill be changing this phone for a while,it works as god as any other phone out there.
Click to expand...
Click to collapse
I am pretty sure you can't get the SII processor overclocked to 1500 Ghz..
23732 said:
I am pretty sure you can't get the SII processor overclocked to 1500 Ghz..
Click to expand...
Click to collapse
U can do so as long as the kernel supports OC(overclocking) or UV(undervolting) for sure
23732 said:
I am pretty sure you can't get the SII processor overclocked to 1500 Ghz..
Click to expand...
Click to collapse
then u cant know to mutch i have clocked it as high as 1600ghz without heating or problems.. and if you cant do it then you will have to change your kernel. i use thunderbolt jellybean rom with dreamkernel and it works great. i have mine clocked at 1500ghz dayly use
tonymb91 said:
then u cant know to mutch i have clocked it as high as 1600ghz without heating or problems.. and if you cant do it then you will have to change your kernel. i use thunderbolt jellybean rom with dreamkernel and it works great. i have mine clocked at 1500ghz dayly use
Click to expand...
Click to collapse
Umm, then whats the point of opening this thread for ma8
tonymb91 said:
then u cant know to mutch i have clocked it as high as 1600ghz without heating or problems.. and if you cant do it then you will have to change your kernel. i use thunderbolt jellybean rom with dreamkernel and it works great. i have mine clocked at 1500ghz dayly use
Click to expand...
Click to collapse
I don't know much, but I do know enough to know that you can't have a stable overclock at 1600Ghz (Gigahertz)
But, I believe that 1600Mhz could be achieved as a stable overclock.
My cpu is running at 1500 mhz 1425-1500 mv and gpu at 520mhz 1300mv the heating issue acctually drops when at 1.5 ghz, my problem is there is no point of having my gpu so high when my cpu is not good enough
hi guys i have a note 3 mediatek device (mtk6582) and when i play games or just using it for more than 30-40 min...it gets really hot, i mean really hott..{90c}....(especially when i'm playing games).
and i think it may be beacause of GPU (mali 400)...but i cant find a way to undervolt it...i think i must have custom kernel to do that...so if anyone knows another method to undervolt the gpu, please tell me.
but i also think that it could be the battery that is not the best quality...and i need someone to tell that if the battery is not that good can this heat up the cpu.(or generally the motherboard)
THANK YOU.
anybodyyy??????
jessegize said:
anybodyyy??????
Click to expand...
Click to collapse
Its either the battery or badly soldered chip set No custom kernels for mt6582 try ramping it up and see if it sets in
Hi, I own this phone and I do overclock the processor, if you can help me , tell me step by step how.
Thank you and excuse my English .
kppus said:
Hi, I own this phone and I do overclock the processor, if you can help me , tell me step by step how.
Thank you and excuse my English .
Click to expand...
Click to collapse
Your english is fine.
To overclock the CPU, you need a custom kernel that supports CPU overclocking. If you're using a stock rom, use a stock kernel, otherwise use an AOSP kernel.
I don't recommend overclocking this phone in particular. It has heat damage issues (can damage digitalizer at specific temperatures).
Overclocking in general is a good idea, but bad for phones. Remember that the temperature rises very quickly with slight voltage additions. Therefore, the CPU will be throttled instantly to a lower frequency (ie: 1497MHz) anyway to prevent damage. It also drains the battery that much quicker.
Quad core (armv8?) @ what? 2.5Ghz if I'm not mistaken. Dude that should already be plenty fast. Honestly most people overclock older devices to give them that last shining chance to go down. Your G2 isn't dated by any means and is still up with the crowd as far as hardware goes.
G2's cpu is still good enough for most tasks without compromising any performance issues.