Related
In the past couple weeks, my thunderbolt will not charge pass 86% percent. If anybody have any solutions, it will be greatly appriciated.
asmk20 said:
In the past couple weeks, my thunderbolt will not charge pass 86% percent. If anybody have any solutions, it will be greatly appriciated.
Click to expand...
Click to collapse
recalibrate your battery by clearing the battery stats?
Please let me know if you find a solution, mine is doing the same...
tried rooting and wiping the battery cal, but no luck...
tried different batteries and chargers, still no luck....
thanx
Danny
What kernel are you on and what ROM?
Most if not all of the time, your charging issues are kernel related.
Sent from my Synergized Thunderbolt via XDA Premium App
im running complete stock (as far as I know)
2.2.1
baseband 1.39.00.0627
kernel 2.6.32.21
build 1.70.605.0
thanx
Danny
inferno1 said:
im running complete stock (as far as I know)
2.2.1
baseband 1.39.00.0627
kernel 2.6.32.21
build 1.70.605.0
thanx
Danny
Click to expand...
Click to collapse
Wow! You need an updated kernel!!! That's from March or April.
Flash Synergy and the MR3.25 Radio.
Synergy: http://androidfilehost.com/XxXViRuSXxX/roms/synergy/thunderbolt/
MR3.25 Radio: http://devious-intentions.info/modules.php?name=Downloads&cid=22
For the radio, scroll to the bottom and find 3.25 Radio and click the download button in the bottom right.
Put the radio on the root of your SD Card and rename it to PG05IMG.
Flash the radio, then boot into recovery. Wipe fully!! Then flash Synergy.
Thank me later!
I'm running burnth3ory with the kernel that came with it, on 802 radio. It happens on other Tom's, kernals, and radios. I tried wiping battery stats and it doesn't solve the issue.
CanesDrew said:
Wow! You need an updated kernel!!! That's from March or April.
Flash Synergy and the MR3.25 Radio.
Synergy: http://androidfilehost.com/XxXViRuSXxX/roms/synergy/thunderbolt/
MR3.25 Radio: http://devious-intentions.info/modules.php?name=Downloads&cid=22
For the radio, scroll to the bottom and find 3.25 Radio and click the download button in the bottom right.
Put the radio on the root of your SD Card and rename it to PG05IMG.
Flash the radio, then boot into recovery. Wipe fully!! Then flash Synergy.
Thank me later!
Click to expand...
Click to collapse
Thanx for the response, but isnt the kernel Im on the stock one?
Back when I used sense based gingerbread I know it would take forever for it to charge at some spots. However, I would think that would have been solved with the newer leaked sources.
If you're using a AOSP/CM7 based ROM, I'd gather it's the ROM or something was messed up when you installed it somehow. I'd try reinstalling and totally wiping all of the internal storage (system, data, etc). And do it from recovery, not rom manager. If it still doesn't work, I would ask the developer of your ROM about it.
yareally said:
Back when I used sense based gingerbread I know it would take forever for it to charge at some spots. However, I would think that would have been solved with the newer leaked sources.
If you're using a AOSP/CM7 based ROM, I'd gather it's the ROM or something was messed up when you installed it somehow. I'd try reinstalling and totally wiping all of the internal storage (system, data, etc). And do it from recovery, not rom manager. If it still doesn't work, I would ask the developer of your ROM about it.
Click to expand...
Click to collapse
Any slow charge issues are kernel related. Especially if he's tried other batteries and getting the same result.
Flash a new kernel or new ROM/kernel combo and you'll be good. I promise.
Tried flashing many different rom and kernel combinations these past few weeks with no luck.
fingers crossed that when we get 2.3 it may magically fix the issue
i tried installing CM7 alpha 3.5. first install went okay fully. went to reboot and boot up and after i clkick cyanogenmod in the dual boot loader, it will display cyanogen icon and load for about 8 - 10 seconds then restart. keeps going in that order. tried erase/wipe all, dalvik, cache, etc... i am not sure what hapopened. does anyone have any ideas for me?
thanks in advance!
Bad zip?
Are you coming from a earlier version of cm7?
Or is it a first time flash for the touchpad?
Bear gri11z said:
Bad zip?
Are you coming from a earlier version of cm7?
Or is it a first time flash for the touchpad?
Click to expand...
Click to collapse
coming from alpha 3. not first time flashing. havent had problems before. tried redownloading the zip 2x
i had the same issue with miui. took me a day to figure it out, as there are few posts on this. you must "wipe sd" in cm recovery before installing the rom. do a backup first. it doesnt touch the webos area.
-ben
bensdeals said:
i had the same issue with miui. took me a day to figure it out, as there are few posts on this. you must "wipe sd" in cm recovery before installing the rom. do a backup first. it doesnt touch the webos area.
-ben
Click to expand...
Click to collapse
tried to do clockwork recovery. finished backing up boot, then went to back up system and restarted.
how do you wipe sd? do you mean partition it?
A sort of solution
I upgraded from 3 to 3.5 as well and I got in to a bootloop as well do I downgrade then re-upgrade or what, any help would be great.
EDIT: After posting this I reinstalled 3.5 and it's working but i'm never going to turn off android again at least until ICS
KJSOARES2 said:
I upgraded from 3 to 3.5 as well and I got in to a bootloop as well do I downgrade then re-upgrade or what, any help would be great.
EDIT: After posting this I reinstalled 3.5 and it's working but i'm never going to turn off android again at least until ICS
Click to expand...
Click to collapse
did you perform any other steps? you just installed 3.5? nothing special?
edit: i tried reinstalling 3.5. i tried redownloading it ot make sure it wasnt corrupt. nothing happened. it reboots during the installing system partition.
I wiped the cache and dalvik other than that I did nothing special, then I just re-installed it and it's working so far.
Okay I have been trying to get a CM9 rom to boot on my Atrix for about a week now. I am coming from Nottachtrix 1.3.1 on radio 37p with faux GB24 kernel. My bootloader is unlocked and I perform all necessary wipes before install. The furthest I have gotten any of the CM9 roms to boot is the screen that states Android Apps(or something) updateing. It then states starting system and boots back to the booting logo. I have tried fastboot -w. Formating data, cache, system, osh, pre install in mounts storage menu, and clearing both caches before and after install and I get the same results. This only happens with CM9 roms. I cannot get the CNA, Jokers, Turls, or Atrix tablet past the screen stated. I have tried with the latest rom racer from http://forum.xda-developers.com/showthread.php?t=1204500 and both recovery and touch recovery from rom manager and I get the same results. I have posted my issue in the dev section, but decided this was better as I did not want to clutter up the dev forum with my problems. Could it just be my Atrix or would the 37p radio have something to do with the bootlooping issue. Any help would be very much appreciated.
For some odd reason I decided to pull my external SD card before boot, and freaking BOOM BANG POW NO BOOTLOOP!
htcslic said:
Okay I have been trying to get a CM9 rom to boot on my Atrix for about a week now. I am coming from Nottachtrix 1.3.1 on radio 37p with faux GB24 kernel. My bootloader is unlocked and I perform all necessary wipes before install. The furthest I have gotten any of the CM9 roms to boot is the screen that states Android Apps(or something) updateing. It then states starting system and boots back to the booting logo. I have tried fastboot -w. Formating data, cache, system, osh, pre install in mounts storage menu, and clearing both caches before and after install and I get the same results. This only happens with CM9 roms. I cannot get the CNA, Jokers, Turls, or Atrix tablet past the screen stated. I have tried with the latest rom racer from http://forum.xda-developers.com/showthread.php?t=1204500 and both recovery and touch recovery from rom manager and I get the same results. I have posted my issue in the dev section, but decided this was better as I did not want to clutter up the dev forum with my problems. Could it just be my Atrix or would the 37p radio have something to do with the bootlooping issue. Any help would be very much appreciated.
Click to expand...
Click to collapse
Did you flash twice ?
Sent from my MB860 using XDA
I believe the problem is with the radio, I had this issue (on stock radio), then I upgraded to the newest CM9 Kang (0.4.4) and it went away. I then flashed the 37p radio in an attempt to fix a problem I've been having with my WiFi and bluetooth (they both don't work and cause reboots, I assume now it's a hardware problem) and the boot loop came back. I'm gonna try flashing some other radios to see if that works.
Yes flashed twice to no avail. Gonna try the 36p radio and stock to see if that fixes my issue.
Sent from my Wettest Dream Atrix!
giqbal said:
Did you flash twice ?
Sent from my MB860 using XDA
Click to expand...
Click to collapse
No need to flash any ROM twice. Not going to discuss other than to say its not require
OP......Not your phone or radio. There is something you are doing incorrectly. Quite possibly wipe procedure. If I remember when I am at my PC in the morning I will PM you exact instructions, start to finish, for flashing one of the CM9 builds.
Sent from my MB860 using xda premium
CaelanT said:
No need to flash any ROM twice. Not going to discuss other than to say its not require
OP......Not your phone or radio. There is something you are doing incorrectly. Quite possibly wipe procedure. If I remember when I am at my PC in the morning I will PM you exact instructions, start to finish, for flashing one of the CM9 builds.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Trust me, the CM9 kang (not turl's version, haven't tried that) didn't work unless you flashed it twice up to version 0.4.2 (I skipped 0.4.3 and installed 0.4.4 straight without wiping and only flashed once and it worked, so it's possible they fixed the bug). I don't think anyone knows why, but it's been confirmed many times.
CaelanT said:
No need to flash any ROM twice. Not going to discuss other than to say its not require
OP......Not your phone or radio. There is something you are doing incorrectly. Quite possibly wipe procedure. If I remember when I am at my PC in the morning I will PM you exact instructions, start to finish, for flashing one of the CM9 builds.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
That is what I am hoping, but I have tried every procedure I could find within the forums. Your start to finish is gonna be my last hope.
So I followed the same steps I use for other roms and managed to get this one working http://forum.xda-developers.com/showthread.php?t=1580449
Hey CaelanT any luck on getting me a step by step.
hitmannumber47 said:
Trust me, the CM9 kang (not turl's version, haven't tried that) didn't work unless you flashed it twice up to version 0.4.2 (I skipped 0.4.3 and installed 0.4.4 straight without wiping and only flashed once and it worked, so it's possible they fixed the bug). I don't think anyone knows why, but it's been confirmed many times.
Click to expand...
Click to collapse
Haven't had to do that with jokersax, turl, or CNA versions.
---------- Post added at 12:24 PM ---------- Previous post was at 12:24 PM ----------
htcslic said:
Hey CaelanT any luck on getting me a step by step.
Click to expand...
Click to collapse
Thanks for reminding me. Will get something to you here in a few!
<edit> Check your messages!
Gonna give it a shot soon as I get off work.
EDIT:
Unfortunately that was a no go as well. Followed everything to a tee and tried different kernels. I can only get the AOKP rom to boot, but its is currently without USB storage. Does anyone know a difference in the roms that would cause my Atrix to boot on one and not the other. I can also manage to get the MIUI to boot.
htcslic said:
Gonna give it a shot soon as I get off work.
EDIT:
Unfortunately that was a no go as well. Followed everything to a tee and tried different kernels. I can only get the AOKP rom to boot, but its is currently without USB storage. Does anyone know a difference in the roms that would cause my Atrix to boot on one and not the other. I can also manage to get the MIUI to boot.
Click to expand...
Click to collapse
I think something is going on with the kernel. You may have a bad processor. That's where my train of thought is right now. Sorry I couldn't get you up and running!
CaelanT said:
I think something is going on with the kernel. You may have a bad processor. That's where my train of thought is right now. Sorry I couldn't get you up and running!
Click to expand...
Click to collapse
Thanks for all you help. Finally got it to boot by removing external sd card.
[EDIT] Not sure but I believe the problem I had with m external sd is I still had an ext4 primary partition on it from when I was using Webtop2SD. Copying everything over to pc now and reformating external to see if my assumption is correct.
Looks like the ext4 partition on as was the culprit.
Sent from my Flipping ArtixTab!
I have S-Off, the leaked May Hboot, an ICS ROM (Nils' Business ICS 3.4 S-off version), but the ICS radios simply do not work.
Today I tried them and had barely functioning cell reception, crap battery life, and only 1x data.
Then I flashed the OTA GB radios, and everything was perfect. Lightening fast 4g, killer cell reception, and great battery.
Why?
Thanks for any help you can provide.
The Beeb
Try this one. There are a couple floating around that may have problems but this one works for me
ICS Latest Radio
Just remove everything in the name before the PH and flash in bootloader (I know, you know this but others may not)
May also want to match the kernel
Thanx, Nils. I'll try it after work today.
BTW, I'm on your new kernel release, and it's running great.
BBEgo said:
Thanx, Nils. I'll try it after work today.
BTW, I'm on your new kernel release, and it's running great.
Click to expand...
Click to collapse
Pretty sure you were so let me know how you make out.
If it ain't broke don't fix it. There are people who would kill for "Lightening fast 4g, killer cell reception, and great battery. "
Kane5581 said:
If it ain't broke don't fix it. There are people who would kill for "Lightening fast 4g, killer cell reception, and great battery. "
Click to expand...
Click to collapse
What you say makes perfect sense, and I even agree with you.
There's just this tiny voice in the back of my head that keeps shouting "Yeah, but WHY?!?"
After updating radios, may need to have stock recovery installed and do a factory reset in hboot, then reflash recovery, rom, & kernel.
Snuzzo said:
After updating radios, may need to have stock recovery installed and do a factory reset in hboot, then reflash recovery, rom, & kernel.
Click to expand...
Click to collapse
Are you asking or telling?
i flashed the latest radio while on my latest ROM with the latest leaked kernel with not problems.
NilsP said:
Are you asking or telling?
i flashed the latest radio while on my latest ROM with the latest leaked kernel with not problems.
Click to expand...
Click to collapse
Just mentioning is all. I had issues myself with data+voice until doing the above. Now I have spot on 4g and calls are crystal.
EDIT:
That was with the older leak, same radios.
Snuzzo said:
After updating radios, may need to have stock recovery installed and do a factory reset in hboot, then reflash recovery, rom, & kernel.
Click to expand...
Click to collapse
+1 you probably NEED to do this.. I know I always do..
In superchilpil's firmware thread he does say to wipe and reinstall or you'll have 4g problems.
http://forum.xda-developers.com/showthread.php?t=1614366
"YOU MUST FACTORY RESET IN THE BOOTLOADER TO FIX DATA ISSUES"
Actually it was Snuzzo who informed me that I need to do that after not reading all the words on the flashing instructions. You know figured I would just skip that part well thats fine if you want your data dropping in and out, no 4G and just general ****tyness..
I did a wipe/factory reset in bootloader, and then restored a CWM Backup of Nils' ROM.
When that didn't work, I did it again and wiped everything and started over with a fresh install... No joy.
Snuzzo said:
After updating radios, may need to have stock recovery installed and do a factory reset in hboot, then reflash recovery, rom, & kernel.
Click to expand...
Click to collapse
I skipped the recovery step... That's gotta be the problem.
BBEgo said:
I did a wipe/factory reset in bootloader, and then restored a CWM Backup of Nils' ROM.
When that didn't work, I did it again and wiped everything and started over with a fresh install... No joy.
Click to expand...
Click to collapse
You have to have the stock recovery in order to factory reset in the bootloader. If you have a custom recovery such as cwm or ra it won't do the reset needed for the radio to work correctly.
Flash stock recovery
Factory reset
Boot to make sure radios work right
Fastboot install custom recovery
Restore backup
Sent from my ADR6425LVW using Tapatalk 2
Hi guys. So here's my problem. I recently tried to update my phone to the latest version of NRG's Energy Rom using CWM. In the process I did a factory data wipe, and wiped the dalvik cache. I then flashed the rom as normal, but when I rebooted all I got was the white screen with the green HTC logo. It refuses to go any further. I can still get into recovery if needed, and I've tried a ton of different things, but to no avail. Anybody have any ideas as to what I need to do or is this thing hosed?
The phone is S-ON at the moment with an unlocked bootloader.
Any help is appreciated.
Mr.Moo52 said:
Hi guys. So here's my problem. I recently tried to update my phone to the latest version of NRG's Energy Rom using CWM. In the process I did a factory data wipe, and wiped the dalvik cache. I then flashed the rom as normal, but when I rebooted all I got was the white screen with the green HTC logo. It refuses to go any further. I can still get into recovery if needed, and I've tried a ton of different things, but to no avail. Anybody have any ideas as to what I need to do or is this thing hosed?
The phone is S-ON at the moment with an unlocked bootloader.
Any help is appreciated.
Click to expand...
Click to collapse
Flash the wipe script, flash the rom you wanted, when the phone boots up, let it sit for a few minutes, like 10 should be good.
Well I'll be damned. I could have sworn I tried that, but there we go. Thank you so much for the help.
Mr.Moo52 said:
Well I'll be damned. I could have sworn I tried that, but there we go. Thank you so much for the help.
Click to expand...
Click to collapse
Also, get rid of CWM and use 4ext recovery. It's in the dev section... And its the preferred recovery by most amaze users. I have a thread in Dev section
It allows you to flash kernel automatically when flashing ROM, that way you don't have to use a kernel flasher. Plus many other features.
Sent from my HTC_Amaze_4G using Tapatalk 2
Thanks for the info. I've been looking at recent posts and it seems I'm behind on a few things, including getting s-off.
Weird Problem
I had the same problem but I don't want to lock and re-unlock my bootloader. And this has never happened but my CWM Recovery isn't working. I didn't use 4ext bc this happened last time with that recovery. Is there any way to find the wipe script to use it from fastboot?
Tried kernel flashing; re-flashing recovery...second time this happened with s-on on speed rom
Had to re-wipe phone and re-flash everything...Got it working again! Weird problem though?!?!