In the past couple weeks, my thunderbolt will not charge pass 86% percent. If anybody have any solutions, it will be greatly appriciated.
asmk20 said:
In the past couple weeks, my thunderbolt will not charge pass 86% percent. If anybody have any solutions, it will be greatly appriciated.
Click to expand...
Click to collapse
recalibrate your battery by clearing the battery stats?
Please let me know if you find a solution, mine is doing the same...
tried rooting and wiping the battery cal, but no luck...
tried different batteries and chargers, still no luck....
thanx
Danny
What kernel are you on and what ROM?
Most if not all of the time, your charging issues are kernel related.
Sent from my Synergized Thunderbolt via XDA Premium App
im running complete stock (as far as I know)
2.2.1
baseband 1.39.00.0627
kernel 2.6.32.21
build 1.70.605.0
thanx
Danny
inferno1 said:
im running complete stock (as far as I know)
2.2.1
baseband 1.39.00.0627
kernel 2.6.32.21
build 1.70.605.0
thanx
Danny
Click to expand...
Click to collapse
Wow! You need an updated kernel!!! That's from March or April.
Flash Synergy and the MR3.25 Radio.
Synergy: http://androidfilehost.com/XxXViRuSXxX/roms/synergy/thunderbolt/
MR3.25 Radio: http://devious-intentions.info/modules.php?name=Downloads&cid=22
For the radio, scroll to the bottom and find 3.25 Radio and click the download button in the bottom right.
Put the radio on the root of your SD Card and rename it to PG05IMG.
Flash the radio, then boot into recovery. Wipe fully!! Then flash Synergy.
Thank me later!
I'm running burnth3ory with the kernel that came with it, on 802 radio. It happens on other Tom's, kernals, and radios. I tried wiping battery stats and it doesn't solve the issue.
CanesDrew said:
Wow! You need an updated kernel!!! That's from March or April.
Flash Synergy and the MR3.25 Radio.
Synergy: http://androidfilehost.com/XxXViRuSXxX/roms/synergy/thunderbolt/
MR3.25 Radio: http://devious-intentions.info/modules.php?name=Downloads&cid=22
For the radio, scroll to the bottom and find 3.25 Radio and click the download button in the bottom right.
Put the radio on the root of your SD Card and rename it to PG05IMG.
Flash the radio, then boot into recovery. Wipe fully!! Then flash Synergy.
Thank me later!
Click to expand...
Click to collapse
Thanx for the response, but isnt the kernel Im on the stock one?
Back when I used sense based gingerbread I know it would take forever for it to charge at some spots. However, I would think that would have been solved with the newer leaked sources.
If you're using a AOSP/CM7 based ROM, I'd gather it's the ROM or something was messed up when you installed it somehow. I'd try reinstalling and totally wiping all of the internal storage (system, data, etc). And do it from recovery, not rom manager. If it still doesn't work, I would ask the developer of your ROM about it.
yareally said:
Back when I used sense based gingerbread I know it would take forever for it to charge at some spots. However, I would think that would have been solved with the newer leaked sources.
If you're using a AOSP/CM7 based ROM, I'd gather it's the ROM or something was messed up when you installed it somehow. I'd try reinstalling and totally wiping all of the internal storage (system, data, etc). And do it from recovery, not rom manager. If it still doesn't work, I would ask the developer of your ROM about it.
Click to expand...
Click to collapse
Any slow charge issues are kernel related. Especially if he's tried other batteries and getting the same result.
Flash a new kernel or new ROM/kernel combo and you'll be good. I promise.
Tried flashing many different rom and kernel combinations these past few weeks with no luck.
fingers crossed that when we get 2.3 it may magically fix the issue
Related
So I went ahead and upgraded to Das BAMF 2.0. Wiped many times before flashing. Went to charge the phone while at work today and it charged very slowly so I figured it was just an issue with the kernal. Flashed a new kernal to fix that but now I am stuck on the boot screen. Has anyone seen this before? What can I do to fix it? Thanks!
Try reflashing the rom and see if it boots back up. Not bashing your intelligence but by some odd reason you may have flashed the wrong kernel?
Sent from my Thunderbolt using XDA Premium.
Haha! You are fine. I wouldn't put it past me either. ;P I didn't wipe but did re-flash the ROM and still nothing. Tried two different kernals as well. Probably just have to wipe then flash, right?
So I have wiped, have not done a factory reset, and re-flashed. Still nothing. Any help is appreciated.
Did U flash the new radio ?
THUNDERBOLT
elliott35 said:
Did U flash the new radio ?
THUNDERBOLT
Click to expand...
Click to collapse
I did flash the new radio the MR2. That is what brought me back to a GB build.
I fixed it by doing a full wipe and re-flashing the ROM. Not ideal but it worked. Thanks!
I unlocked the bootloader and rooted it okay... then I flashed a ROM, that also worked fine. I tried to flash a kernel and now it just gets stuck on the HTC screen. I tried restoring my back up, still the same issue. Tried reflashing the ROM, same issue. Not sure how to get it back to normal at this point.
It sounds like the kernel you flashed is either a 2.3.3 kernel that doesn't work on 2.3.4, or it was a bad flash. You should be able to fix this by holding volume down when booting up (opens HBOOT) then choose Recovery and from the recovery you can then either enable USB Mass Storage device and transfer a stock kernel over USB to your SD card then flash the stock kernel, or if you already have a stock kernel on your SD card, you can just select it from the install from zip menu and flash.
This Kernel should work fine (it's stock with CIQ spyware removed):
http://forum.xda-developers.com/showthread.php?t=1224659
and after I flash this kernel it should be back to normal.... or should I try to flash a ROM all over again as well? As long as it can definitely be fixed then that's quite alright.... this phone compared to the Epic (which I came from) seems like it's much less fail safe to me.
Coriolis3ffect said:
and after I flash this kernel it should be back to normal.... or should I try to flash a ROM all over again as well? As long as it can definitely be fixed then that's quite alright.... this phone compared to the Epic (which I came from) seems like it's much less fail safe to me.
Click to expand...
Click to collapse
ROMs usually have kernels. You could just wipe Dalvick cache and cache and flash your original rom (which has it's original kernel). and that should work.
There's a sea of roms. You could try posting on a rom's thread whether a particular kernel is compatible. Just follow the spin of things. Saves from just going round in circles.
Coriolis3ffect said:
and after I flash this kernel it should be back to normal.... or should I try to flash a ROM all over again as well? As long as it can definitely be fixed then that's quite alright.... this phone compared to the Epic (which I came from) seems like it's much less fail safe to me.
Click to expand...
Click to collapse
Here's a scenario: If you installed a rooted stock 2.3.4 rom then decided to install Silverneedle kernel, your phone will get stuck in this boot-loop because the silverneedle kernel is not compatible with 2.3.4 yet. So by flashing a stock kernel over what is already on there, it should fix the problem. Before you flash the stock kernel clear cache and dalvik. After that flash the kernel and reboot the phone. Chances are it will boot normally. I doubt you will have to reflash a ROM to fix this.
Just cleared the dalvik and the cache, reflashed the ROM hoping to start completely fresh and its still getting stuck...
Coriolis3ffect said:
Just cleared the dalvik and the cache, reflashed the ROM hoping to start completely fresh and its still getting stuck...
Click to expand...
Click to collapse
Then flash a stock kernel. I have had the same problem before. I flashed a ROM, installed a kernel and stuck at HTC boot screen. The fix is to either install a stock kernel through bootloader or flash another ROM in recovery. If you want the best chance of it working the first time, then flash the stock rooted 2.3.4 ROM by xhausx. If you want to try other ROMs and kernels, make sure that your ROM and kernel are compatible. Also use the synergy wipe zip file before flashing to make sure everything is formatted properly. Also, did you flash the extra firmwares that came with the 2.3.4 update? If not, make sure you flash those along with the new radio that just came out.
Sent from my PG86100 using Tapatalk
Take it you didn't do a nandroid before flashing?
Sent from my PG86100 using xda premium
Tried to get my nandroid and it still got stuck..
Perhaps I should've also mentioned that my bootloader still says S-ON and I unlocked it using the HTC unlock method.
sn0b0ard said:
Then flash a stock kernel. I have had the same problem before. I flashed a ROM, installed a kernel and stuck at HTC boot screen. The fix is to either install a stock kernel through bootloader or flash another ROM in recovery. If you want the best chance of it working the first time, then flash the stock rooted 2.3.4 ROM by xhausx. If you want to try other ROMs and kernels, make sure that your ROM and kernel are compatible. Also use the synergy wipe zip file before flashing to make sure everything is formatted properly. Also, did you flash the extra firmwares that came with the 2.3.4 update? If not, make sure you flash those along with the new radio that just came out.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Not sure about any extra firmwares actually.... currently going to try flashing xhaus' ROM and hope that works...
Flashed the superwipe before flashing the ROM, then flashed the ROM... it went to the HTC screen for a second then just vibrated and then turned black.
When I go into the bootloader when it is loading up the images.... it kept saying "No Image!" for all of them. I'm not having any luck with this at all.
Coriolis3ffect said:
When I go into the bootloader when it is loading up the images.... it kept saying "No Image!" for all of them. I'm not having any luck with this at all.
Click to expand...
Click to collapse
Do you have it named exactly PG86IMG.ZIP?
Sent from my PG86100 using xda premium
Okay... you mentioned something about firmwares to flash... which ones are they?
I'm kinda lost at this point because I'm not sure about the specific order in which you are supposed to do things.
Which version of hboot do you have?
Sent from my PG86100 using xda premium
1.50.000 or whatever
Just follow this guide easy. Easy step by step.
http://forum.xda-developers.com/showthread.php?t=1231249
jayharper08 said:
Just follow this guide easy. Easy step by step.
http://forum.xda-developers.com/showthread.php?t=1231249
Click to expand...
Click to collapse
+1 on this. RUU method should be bullet proof
Coriolis3ffect said:
Okay... you mentioned something about firmwares to flash... which ones are they?
I'm kinda lost at this point because I'm not sure about the specific order in which you are supposed to do things.
Click to expand...
Click to collapse
It's in the post that xhausx made for the stock rooted 2.08.651.2 ROM.
URL: http://forum.xda-developers.com/showthread.php?t=1223979
List of new firmwares for the 2.08.651.2 update:
(If you do the RUU method, you should have all the firmwares installed automatically btw...)
Radio & PRI Updates Radio 0.97.10.0808 PRI 1.24_003
PG86IMG_radio_pri.zip (MD5: E28414AAC6F91CE9D7B3615B2999AD3A)
RPM Possible fix for Black SOD
PG86IMG_rpm.zip (MD5: DE69396C8922FAD3AC82E5F836EE95FB)
SBL Secure Bootloader?
PG86IMG_sbl.zip (MD5: 5604349AD611241CF1AC152FD3B0DE45)
TZ Trusted Zone - Not sure of it's purpose
PG86IMG_tz.zip (MD5: 75749FBCCE1331A5A85D2A154E15B276)
PG2F2_SPCUSTOM - No idea what it is
PG86IMG_pg2f2_spcustom.zip (MD5: 7A7DE8659A0771919A14B0C299CA18CC)
Click to expand...
Click to collapse
The link posted is for the GSM Evo 3D... will it work on CDMA?
After sometime my cell phone is rebooting all times.
If it goes idle and I press the button to wake it, it reboots.
I've used some custom roms including CM7.
After I restored to my original firmware which is Claro Brazil, it keeps rebooting all time .
Anyone know what can I do? I even sent it to motorola and they don't do a thing. All they say is that it don't have any defect .
Thank you
Jayson
Did it start rebooting after you after you restored to the original firmware,
or did you restore to the original firmware to try to fix the reboots?:
blingmaster said:
Did it start rebooting after you after you restored to the original firmware,
or did you restore to the original firmware to try to fix the reboots?:
Click to expand...
Click to collapse
I restored to original to try to fix and it keeps rebooting.
I've flashed that build of ICS of dev thread and it seems to be rebooting less times.
How did you flash the rom?
Are you using romracers recovery?
Did you do a full wipe before flashing the rom?
You might make sure you have romracers latest recovery,
and then run this script for a full wipe:
http://forum.xda-developers.com/showthread.php?t=1421261&highlight=moto-fastboot+script
and then load a new rom and see if that fixes it.
You can also flash the Kernel and the radio too.
blingmaster said:
How did you flash the rom?
Are you using romracers recovery?
Did you do a full wipe before flashing the rom?
You might make sure you have romracers latest recovery,
and then run this script for a full wipe:
http://forum.xda-developers.com/showthread.php?t=1421261&highlight=moto-fastboot+script
and then load a new rom and see if that fixes it.
You can also flash the Kernel and the radio too.
Click to expand...
Click to collapse
First I installed IHOP_Bell.sbf with sbf_flash to be able to unlock with moto-fastboot. After that did install CWM.
All my roms are installed with CWM with its cache/data and stuff wipe.
How can I know the right kernel and radio for me?
Same for me. I think this is a radio issue, where can we find lastest radio? Do we need to flash it like rom via RR CWM?
Thanks.
I get random reboots all the time. I was thinking it was a problem with wireless or bluetooth... Last time it rebooted was this morning, I docked it before going to bed, and 5 minutes later i hear the double-ding of it mounting internal storage at boot. At the time it wasn't running anything but the dock-widget clock.
I've had it reboot while on the bus listening to music with the phone in my pocket, I've had it reboot while docked and sitting idle, but youtube and flash are the real killers while actually using the phone, for me at least.
I find it reboots less if I leave wireless and bluetooth off, but what is the good in that?
I've had the random reboots probably since I upgraded to gingerbread, but even moreso after Bell 2.3.6 OTA.
I wonder if there is a way to prevent it from rebooting, so we can see what actually causes it to spontaneously reboot.
Im getting random reboots too, but figured it was from the build of CM7 i'm running (23-Nov. Was thinking of doing a full wipe then reload sometime this week. will report my results.
Hi!
Same thing happened to me. What I did was, I flashed to a different radio for it to be fixed. The stock doesn't seem to work on mine and I can't have signal reception.
Sent from my MB860 using XDA App
I'm also getting reboots when I'm not on wifi.... Sometimes takes 15 mins once I'm not on wifi using 2.3.6 bell with latest radio.
Sent from my MB860
try wipeing data cache and dalvic with fastboot then flash a rom
thats the "cleanest way to install
ltdanno360 said:
try wipeing data cache and dalvic with fastboot then flash a rom
thats the "cleanest way to install
Click to expand...
Click to collapse
I've already did it without success.
Now I'm trying this new Radio:
http://forum.xda-developers.com/showthread.php?t=1175750
N_01.100.00R
because I'm pretty sure it is a Radio issue.
I previously had N_01.95.00R wich seems to be an Asian Radio that probably (hopefully) doesn't work properly here.
I will tell you if it will fix the problem.
Hi there,
I also have random reboots on my Atrix.
Till now, I tried to change rom, recovery, reset data factory, use no apps, etc. But it never worked, and the reboots are still happening without any logical explanation.
I'm also thinking about a Radio problem, mine is : N_01.100.00R
I'll try changing it this evening, maybe it will fix things.
I'm trying a new radio too.
It didn't reboot yet.
jaysonsantos said:
I'm trying a new radio too.
It didn't reboot yet.
Click to expand...
Click to collapse
Which one? Please, tell us!
Just had my second reboot in 5 minutes with N_01.100.00R...
Basically, it happens only in 3G and never in 2G, so I really think this is a radio issue, but I can't find alternatives...
-Fra- said:
Which one? Please, tell us!
Just had my second reboot in 5 minutes with N_01.100.00R...
Click to expand...
Click to collapse
Mine is a brazilian version, I'm using N_01.31.00R.
Maybe you should try Bell GB Version which is in dev forum.
jaysonsantos said:
Mine is a brazilian version, I'm using N_01.31.00R.
Maybe you should try Bell GB Version which is in dev forum.
Click to expand...
Click to collapse
Thank you!
Now I'm trying with N_01.07.05P...
Have you check your battery contact?
Sent from my HTC Hero using XDA App
Mine atrix also reboots, but it has stock 2.3.4. Suggestions?
Sent from my HTC Tattoo using Tapatalk
roflestomp said:
/thread
change radio to N_01.77.36P.
I bet most you're reboots are withing 1 minute of loosing data connection over 3g/4g. Use this radio and I haven't have had one reboot with both blur based roms and currently cm7.
Click to expand...
Click to collapse
Do you have any link to this radio?
Now with N_01.07.05P I had 2h and 16 min. without reboots, but if it will fail again I will try your one!
Thank you.
I have S-Off, the leaked May Hboot, an ICS ROM (Nils' Business ICS 3.4 S-off version), but the ICS radios simply do not work.
Today I tried them and had barely functioning cell reception, crap battery life, and only 1x data.
Then I flashed the OTA GB radios, and everything was perfect. Lightening fast 4g, killer cell reception, and great battery.
Why?
Thanks for any help you can provide.
The Beeb
Try this one. There are a couple floating around that may have problems but this one works for me
ICS Latest Radio
Just remove everything in the name before the PH and flash in bootloader (I know, you know this but others may not)
May also want to match the kernel
Thanx, Nils. I'll try it after work today.
BTW, I'm on your new kernel release, and it's running great.
BBEgo said:
Thanx, Nils. I'll try it after work today.
BTW, I'm on your new kernel release, and it's running great.
Click to expand...
Click to collapse
Pretty sure you were so let me know how you make out.
If it ain't broke don't fix it. There are people who would kill for "Lightening fast 4g, killer cell reception, and great battery. "
Kane5581 said:
If it ain't broke don't fix it. There are people who would kill for "Lightening fast 4g, killer cell reception, and great battery. "
Click to expand...
Click to collapse
What you say makes perfect sense, and I even agree with you.
There's just this tiny voice in the back of my head that keeps shouting "Yeah, but WHY?!?"
After updating radios, may need to have stock recovery installed and do a factory reset in hboot, then reflash recovery, rom, & kernel.
Snuzzo said:
After updating radios, may need to have stock recovery installed and do a factory reset in hboot, then reflash recovery, rom, & kernel.
Click to expand...
Click to collapse
Are you asking or telling?
i flashed the latest radio while on my latest ROM with the latest leaked kernel with not problems.
NilsP said:
Are you asking or telling?
i flashed the latest radio while on my latest ROM with the latest leaked kernel with not problems.
Click to expand...
Click to collapse
Just mentioning is all. I had issues myself with data+voice until doing the above. Now I have spot on 4g and calls are crystal.
EDIT:
That was with the older leak, same radios.
Snuzzo said:
After updating radios, may need to have stock recovery installed and do a factory reset in hboot, then reflash recovery, rom, & kernel.
Click to expand...
Click to collapse
+1 you probably NEED to do this.. I know I always do..
In superchilpil's firmware thread he does say to wipe and reinstall or you'll have 4g problems.
http://forum.xda-developers.com/showthread.php?t=1614366
"YOU MUST FACTORY RESET IN THE BOOTLOADER TO FIX DATA ISSUES"
Actually it was Snuzzo who informed me that I need to do that after not reading all the words on the flashing instructions. You know figured I would just skip that part well thats fine if you want your data dropping in and out, no 4G and just general ****tyness..
I did a wipe/factory reset in bootloader, and then restored a CWM Backup of Nils' ROM.
When that didn't work, I did it again and wiped everything and started over with a fresh install... No joy.
Snuzzo said:
After updating radios, may need to have stock recovery installed and do a factory reset in hboot, then reflash recovery, rom, & kernel.
Click to expand...
Click to collapse
I skipped the recovery step... That's gotta be the problem.
BBEgo said:
I did a wipe/factory reset in bootloader, and then restored a CWM Backup of Nils' ROM.
When that didn't work, I did it again and wiped everything and started over with a fresh install... No joy.
Click to expand...
Click to collapse
You have to have the stock recovery in order to factory reset in the bootloader. If you have a custom recovery such as cwm or ra it won't do the reset needed for the radio to work correctly.
Flash stock recovery
Factory reset
Boot to make sure radios work right
Fastboot install custom recovery
Restore backup
Sent from my ADR6425LVW using Tapatalk 2
I have been running MeanBean for a few months and am not very happy with the battery life and certain other "Features" and would like to flash the ICS ROM listed below. I have tried a few times to flash it but it won't install. It stalls trying to install and just sits there for up to an hour with no progress. I have wiped everything several times and get the same results. I end up having to go back to MeanBean also listed below (Which installs just fine in about 5 minutes.) I've re-downloaded the ROM several times getting the same size.
I've recently started getting random reboots with no error report generated. That and the poor battery life begs me to go back to ICS... If It would install. I have 1 year left on the contract so a new phone is not in the cards.
Any suggestions?
Kernel: 3.4.10-g19136fe
Baseband: 1.05.11.0606
Build: 3.16.651.3
S-ON
Thanks! ?)
jocarog said:
Try either mean rom ics if you haven't updated your firmware or meanbean jelly bean if you did update to the latest firmware, both have all the instructions in the op for s-on installation should be easy...
http://forum.xda-developers.com/showthread.php?t=2048229 (meanbean) :good:
http://forum.xda-developers.com/showthread.php?t=1727167 (mean rom)
Both are pure stock with a bunch of tweaks that will give you good battery life and performance, only con is that both haven't been updated in a while but are pretty stable... (ics mean rom not being developed at all anymore)
Click to expand...
Click to collapse
Micro Maniac said:
I have been running MeanBean for a few months and am not very happy with the battery life and certain other "Features" and would like to flash the ICS ROM listed below. I have tried a few times to flash it but it won't install. It stalls trying to install and just sits there for up to an hour with no progress. I have wiped everything several times and get the same results. I end up having to go back to MeanBean also listed below (Which installs just fine in about 5 minutes.) I've re-downloaded the ROM several times getting the same size.
I've recently started getting random reboots with no error report generated. That and the poor battery life begs me to go back to ICS... If It would install. I have 1 year left on the contract so a new phone is not in the cards.
Any suggestions?
Kernel: 3.4.10-g19136fe
Baseband: 1.05.11.0606
Build: 3.16.651.3
S-ON
Thanks! ?)
Click to expand...
Click to collapse
since you are s-on, are you flashing the kernel/boot.img separately? or thru fastboot? If I'm not mistaken when you are s-on you have to flash the rom twice (meanben OP and meanrom ICS OP instructed) so the kernel gets installed... Good luck!
P.S. you need to update your radio/baseband but for that you need to be s-off.
I have the same problem, except for me when I install the MeanRom zip, it reboots while it installs the kernel and then hangs. I'd really like to get this rom working again! Really the onnly reason was because I heard that Sprint limited MMS sizes on JB, and ICS was supposedly unaffected, so I wanted to see if it was true.
numel007 said:
I have the same problem, except for me when I install the MeanRom zip, it reboots while it installs the kernel and then hangs. I'd really like to get this rom working again! Really the onnly reason was because I heard that Sprint limited MMS sizes on JB, and ICS was supposedly unaffected, so I wanted to see if it was true.
Click to expand...
Click to collapse
Try a different download, did you checked the md5?? If you are s-off it should be easy to flash...
jocarog said:
Try a different download, did you checked the md5?? If you are s-off it should be easy to flash...
Click to expand...
Click to collapse
I'm s-off, and I thought maybe there was something wrong with the md5 also, but it checks out fine. I also tried downloading an older version, then dirty flashing the newer version, but that didn't work either and it hung at the same spot. I've never had problems before with flashing roms before... althoughI've never been able to flash a kernel correctly for some reason. Custom kernels and my phone just never work
numel007 said:
I'm s-off, and I thought maybe there was something wrong with the md5 also, but it checks out fine. I also tried downloading an older version, then dirty flashing the newer version, but that didn't work either and it hung at the same spot. I've never had problems before with flashing roms before... althoughI've never been able to flash a kernel correctly for some reason. Custom kernels and my phone just never work
Click to expand...
Click to collapse
thicklizard has a kernel stabilizer in his dev folder made by viperboy, my replacement doesn't like custom kernels if I don't flash that right after the kernel, did you used superwipe or just wiped in TWRP?
jocarog said:
thicklizard has a kernel stabilizer in his dev folder made by viperboy, my replacement doesn't like custom kernels if I don't flash that right after the kernel, did you used superwipe or just wiped in TWRP?
Click to expand...
Click to collapse
A stabilizer? Does that work across all roms Sense and AOSP? Or just certain types? I only wiped in twrp, but according to instruction to install kernels, all you need to do is wipe cache and dalvik before flashing right?
numel007 said:
A stabilizer? Does that work across all roms Sense and AOSP? Or just certain types? I only wiped in twrp, but according to instruction to install kernels, all you need to do is wipe cache and dalvik before flashing right?
Click to expand...
Click to collapse
You need to do a super wipe and in the same session I would flash the custom kernel and yes the stabilizer works on sense and aosp...
numel007 said:
A stabilizer? Does that work across all roms Sense and AOSP? Or just certain types? I only wiped in twrp, but according to instruction to install kernels, all you need to do is wipe cache and dalvik before flashing right?
Click to expand...
Click to collapse
Are you positive you are S-OFF? You used Facepalm,DirtyRacun,or Moonshine?
S-OFF and htcdev unlocked are 2 totally different things
Sounds to me like you are just htcdev unlocked
jocarog said:
You need to do a super wipe and in the same session I would flash the custom kernel and yes the stabilizer works on sense and aosp...
Click to expand...
Click to collapse
If I superwipe, I'll need to reflash the rom correct? And then without rebooting, install the stabilizer, wipe cache and dalvik, then Komodo?
bigdaddy619 said:
Are you positive you are S-OFF? You used Facepalm,DirtyRacun,or Moonshine?
S-OFF and htcdev unlocked are 2 totally different things
Sounds to me like you are just htcdev unlocked
Click to expand...
Click to collapse
I believe I am s-off, as my bootloader reads. I used DirtyRacun (which had a number of problems.)
Oh and my Hboot is 1.19.222 if that helps
numel007 said:
If I superwipe, I'll need to reflash the rom correct? And then without rebooting, install the stabilizer, wipe cache and dalvik, then Komodo?
I believe I am s-off, as my bootloader reads. I used DirtyRacun (which had a number of problems.)
Oh and my Hboot is 1.19.222 if that helps
Click to expand...
Click to collapse
Yup looks like you are s-off
Komodo won't work on sense roms
bigdaddy619 said:
Yup looks like you are s-off
Komodo won't work on sense roms
Click to expand...
Click to collapse
Oh I know Komodo doesn't work, forgot to mention I'm running ReVolt to test if I can install kernels... Just tried the stabilizer, and then the kernel. Still no luck Get put in a bootloop
numel007 said:
If I superwipe, I'll need to reflash the rom correct? And then without rebooting, install the stabilizer, wipe cache and dalvik, then Komodo?
I believe I am s-off, as my bootloader reads. I used DirtyRacun (which had a number of problems.)
Oh and my Hboot is 1.19.222 if that helps
Click to expand...
Click to collapse
If you are going to go back to ics mean rom do not flash Komodo! That's for aosp 4.2.2, you might want to use an ics kernel... I don't remember the name but zarbos had one and I think flar2 had another one, and flash rom, then custom kernel, then stabilizer, reboot...
jocarog said:
If you are going to go back to ics mean rom do not flash Komodo! That's for aosp 4.2.2, you might want to use an ics kernel... I don't remember the name but zarbos had one and I think flar2 had another one, and flash rom, then custom kernel, then stabilizer, reboot...
Click to expand...
Click to collapse
Yeah forgot to mention what rom I'm using. But I tried to use I believe Arc-Reactor a while back with Sense and the same thing happened then too
numel007 said:
Oh I know Komodo doesn't work, forgot to mention I'm running ReVolt to test if I can install kernels... Just tried the stabilizer, and then the kernel. Still no luck Get put in a bootloop
Click to expand...
Click to collapse
Try a lower speed meaning 1.7ghz or 1.8ghz some phones don't like to be OC'ed
bigdaddy619 said:
Try a lower speed meaning 1.7ghz or 1.8ghz some phones don't like to be OC'ed
Click to expand...
Click to collapse
I'm using the 1.5 version when I flash. I also tried the 1.7 before, and neither work. I think I have a busted phone or something lol
numel007 said:
I'm using the 1.5 version when I flash. I also tried the 1.7 before, and neither work. I think I have a busted phone or something lol
Click to expand...
Click to collapse
hmmmmm weird
BTW is revolt even for the EVO LTE? NVM found it
bigdaddy619 said:
hmmmmm weird
BTW is revolt even for the EVO LTE?
Click to expand...
Click to collapse
Well seeing as there is a thread here, someone ported it at least. It's really really nice though I'd love to get my own kernel working on it. You don't think that maybe since it's a hybrid of three different roms, that would be affecting the installation? I guess perhaps I could superwipe, install rom, install stabilizer, and then kernel.
Link to ReVolt: http://forum.xda-developers.com/showthread.php?t=2337740
numel007 said:
Well seeing as there is a thread here, someone ported it at least. It's really really nice though I'd love to get my own kernel working on it. You don't think that maybe since it's a hybrid of three different roms, that would be affecting the installation? I guess perhaps I could superwipe, install rom, install stabilizer, and then kernel.
Link to ReVolt: http://forum.xda-developers.com/showthread.php?t=2337740
Click to expand...
Click to collapse
IDK I only use sense roms so not really sure what the problem might be
bigdaddy619 said:
IDK I only use sense roms so not really sure what the problem might be
Click to expand...
Click to collapse
I could experiment quickly. I'll do the installs with Elemental 1.5 and MeanBean and see if I can boot.
Update: Flashed, rom appears to be stuck in boot animation.
Update 2: Booted! Wow, alright guess I'll try the same with ReVolt now...