Hi All,
I wanted to ask whether one can help me where and how can I install Android Froyo 2.2 or Ginger Bread 2.3. Because I can not and does not know English so well that works out of the 100%. It would be nice if you can help me.
Thanks in advance.
First of all you need to root your phone. Then install xRecovery or ClockWorkMod Recovery (recommended) and then put the room in your sd card and flash it with either xRecovery or CWM Recovery. NOTE that the roms are targeted to one of these two recoveries.
Just look up the tutorials, since we can help you only in english (or at least we have to provide bilingual posts with english and language X), you can read these tutorials. What ist important: You have to _always_ know what you are doing, this is even more important when you are working in your filesystem. Screwing files up, could mean that you have to use SEUS to unbrick your phone.
But here are some steps.
First root your phone with SuperOneClick.
Download a BusyBox installer rom the market and install BusyBox
Get somehow root explorer (or any other explorer that can mount your /system as R/W)
Then look for the xRecovery installer vom slade87 or D4rk.
(You can go into recovery with pressing Back while the SE logo appears)
Install xRecovery with the provided steps.
Now you have to make your choice:
CM7 14.5 (Gingerbread) could as far as i know only be flashed with xRecovery, but i recommend flashing a nice Froyo rom (FroyoComb or Cyanogen Froyo, they both based on the same ROM but i prefer FroyoComb. Basically they are the same). For flashing them you need ClockWorkMod recovery (which will be used in future anyways, cause you cant brick your phone with it).
Go to the thread of ClockWorkMod and download the file. You have to install it manually, so lock at the permissions of the files you replace. When youve done all correct your recovery screen will be yellow. And now you can flash a custom zip. FroyoComb or Cyanogen Froyo, your choice.
Hope this was helpfull
s0ftcorn said:
Just look up the tutorials, since we can help you only in english (or at least we have to provide bilingual posts with english and language X), you can read these tutorials. What ist important: You have to _always_ know what you are doing, this is even more important when you are working in your filesystem. Screwing files up, could mean that you have to use SEUS to unbrick your phone.
But here are some steps.
First root your phone with SuperOneClick.
Download a BusyBox installer rom the market and install BusyBox
Get somehow root explorer (or any other explorer that can mount your /system as R/W)
Then look for the xRecovery installer vom slade87 or D4rk.
(You can go into recovery with pressing Back while the SE logo appears)
Install xRecovery with the provided steps.
Now you have to make your choice:
CM7 14.5 (Gingerbread) could as far as i know only be flashed with xRecovery, but i recommend flashing a nice Froyo rom (FroyoComb or Cyanogen Froyo, they both based on the same ROM but i prefer FroyoComb. Basically they are the same). For flashing them you need ClockWorkMod recovery (which will be used in future anyways, cause you cant brick your phone with it).
Go to the thread of ClockWorkMod and download the file. You have to install it manually, so lock at the permissions of the files you replace. When youve done all correct your recovery screen will be yellow. And now you can flash a custom zip. FroyoComb or Cyanogen Froyo, your choice.
Hope this was helpfull
Click to expand...
Click to collapse
You could also use the xrecovery apk for quick install, as long as you know how to work with it.
Here is the page: http://forum.xda-developers.com/showthread.php?t=878426&highlight=xrecovery
Credits go to zdzihu and D4
nilseby said:
You could also use the xrecovery apk for quick install, as long as you know how to work with it.
Here is the page: http://forum.xda-developers.com/showthread.php?t=878426&highlight=xrecovery
Credits go to zdzihu and D4
Click to expand...
Click to collapse
thanks to all for now.
It is this: the X10 Pro I have been rooted with SuperOneClick.
I also have the Xrecovery as the BusyBox Insatlliert.
But how do I install the: Cyanogen Froyo CM6-Latest (based on MiniCM)
- Release v5.0 Final reuploaded?
I've read that you install it through Xrecovery or CWM must, as
because it works?
Cm7
experthandy said:
thanks to all for now.
It is this: the X10 Pro I have been rooted with SuperOneClick.
I also have the Xrecovery as the BusyBox Insatlliert.
But how do I install the: Cyanogen Froyo CM6-Latest (based on MiniCM)
- Release v5.0 Final reuploaded?
I've read that you install it through Xrecovery or CWM must, as
because it works?
Click to expand...
Click to collapse
sent from this midget x10 mini pro using cm7.2.3.3 14.5
experthandy said:
thanks to all for now.
It is this: the X10 Pro I have been rooted with SuperOneClick.
I also have the Xrecovery as the BusyBox Insatlliert.
But how do I install the: Cyanogen Froyo CM6-Latest (based on MiniCM)
- Release v5.0 Final reuploaded?
I've read that you install it through Xrecovery or CWM must, as
because it works?
Click to expand...
Click to collapse
are you german? if yes PM me, ill help you
Related
If it matters I've got a sony ericsson X10i from AT&T (North America)
already rooted, using a stock 2.1 rom with .54 baseband.
I want to switch over to 2.2 and fully optimize my device.
This is the procedure I believe I need to go through.
Please tell me if I am missing any steps.
1-Use flash tool to install latest baseband (.55 right? I would appreciate a link to this)
2-Reroot?
3-Install Busy Box and SuperUser Access
4-Install Xrecovery using flash tool?? (would appreciate link)
5-Install "TMR_CM_6.1.3_DesireX10"
6-install dual touch
7-install JIT (Is there a guide to do this for 2.2?)
8-install App2sd (Is there a guide to do this for 2.2?)
So am I missing anything?
dont worry bout the baseband all you need to do is root it (if not yet rooted) install xrecovery, move TMR .zip to your sd card open xrecovery on phone back up rom if you want factory reset wide dalvik cache wipe cache and install custom zip then boot thats it.
might want to install gapps afterwards.
if you already have BB .54 it will keep dual touch and jitm busy boxm xrecovery etc are already included in the rom.
i'm not sure bout the app2sd thing
Use recovery to install, don't use flash tool. Most ROM are released for installing via recovery.
6-install dual touch
7-install JIT (Is there a guide to do this for 2.2?)
8-install App2sd (Is there a guide to do this for 2.2?)
All is included in 2.2
There`s a big confusion here.
1. You don`t need to flash with latest .55 baseband unless you want to. You can find baseband HERE;
2. If you already have root and xRecovery, just install your desired rom directly through xRecovery. ROM
3. If you don`t have xRecovery or others go HERE, download Flashtool and install. If you have ANY dough go HERE to see how FT work.
4. You won`t need to install ANYTHING after. All these ROM/MOD came with all that pre-installed (root, xRecovery, JIT, app2sd, dual toutch, blá, blá, blá)
Period!
Don`t confuse the man. Don`t talk about you don`t really know!!!
Cheers,
Rendeiro
i think z has released an apk for the xRecovery installer.
all you do is to install the apk, then run it.
you'll find the install xRecovery button in that app.
I have X10 mini pro and i have question, how i can install this
http://forum.xda-developers.com/showthread.php?t=1059361
or this
http://forum.xda-developers.com/showthread.php?t=1041099
system witch patches, i try it, but without succes.I only managed to install the system
http://www.youtube.com/watch?v=9RYp5QPncM0
, but others do not. Is there a tutorial, I'm looking all day and nothing
Mallp said:
I have X10 mini pro and i have question, how i can install this
http://forum.xda-developers.com/showthread.php?t=1059361
or this
http://forum.xda-developers.com/showthread.php?t=1041099
system witch patches, i try it, but without succes.I only managed to install the system
http://www.youtube.com/watch?v=9RYp5QPncM0
, but others do not. Is there a tutorial, I'm looking all day and nothing
Click to expand...
Click to collapse
Well I'm using the ROM of which you've listed in the second link. Here are some tips and see if they help:
1. Make sure you have the latest SE firmware (2.1.1.A.0.6 and baseband version: 53404015) Do this by checking software updates with SEUS (Sony Ericsson Update Service)
2. Ensure you've got the right Xrecovery version. Download and unpack and flash THE ONE BUILT FOR THE MINI PRO or else some features in xrecovery may not work or even brick your device.
3.Remember to wipe Dalvik Cache and do a factory reset in xrecovery BEFORE you install any of these ROMs.
4. You may also wipe battery stats before you install the ROM, but I don't think this is essential.
The install should be flawless if you follow every of the steps listed by the devs who developed the ROM, and take these steps above only as an advice...I'm not responsable for bricking your lovely phone...
Enjoy CyanogenMod experience after the install!
thanks man (are you God), the system is already running. and do not know yet how I doninstalovat patches on the keyboard backlight, GPS and camera?
assuming you want to install apps:
Market or apk's or *.zip files (which you can install with xrecovery)
I mean, I do not install the latest 3 hotfixes for this ROM: http://forum.xda-developers.com/showthread.php?t=1041099
A try install by Xrecover, but without changes......
Hi guys,
i have decided that i install new ROM to my device.
Device :
xperia x10 mini pro, U20i, 2.1-update1, 2.1.1.A.0.6
My device is ROOTed - i have used SUPER ONE CLICK, i have installed BUSYBOX from the Market, and i have got xRecovery.
I have downloaded ROM - http://forum.xda-developers.com/showthread.php?t=1059361
I have copied it to my SD card, turn off the phone,turn on the phone,on the SE logo i have touched BACK button => i get into xRecovery.
I have update .zip file from sd card- everything done. Reboot device. (i have tried- wipe cache, -factory reset, -reboot, but problem still last)
Device has turned off, turned on, there was SE logo, than just black display, so i have waited long time - about 20-25 minutes, but there was still just black display, phone simetimes vibrated but nothing else.
I have restored my system using xRecovery.
Please help me somebody,i want this ROM but i can not do that.
Sorry form my english.
Do it again staring with any back ups ,,, if not seus when you get to a rom choose a more stable rom ,,, like slade 5 or cm7
Sent from my U20i using XDA Premium App
Install CM6 V6 after installation CM6 V5
Problem black screen
Hi i have the same like friend under me.
I trying install cm6 v5 and latter cm6 v6 .
but this is not change anything.
during booted after sonyericsson logo, i have black screen and sometimes vibrate.
sorry for my language, but my national language is polish, english is learning
Hi guys !
I have installed v.5 .That version works correctly. I have tried to install v. 6 after v.5 but that brokes again at SE logo after reboot.
I want to ask, how get i Hotfixes to the system ? I have downloaded Hotfix .zip files, but i do not know how i should apply that.
Thanks
You can install Hotfixes through CWM or xRecovery. Just go to option instal custom zip and choose the Hotfix you want.
NihilisticWonder said:
You can install Hotfixes through CWM or xRecovery. Just go to option instal custom zip and choose the Hotfix you want.
Click to expand...
Click to collapse
I have tried to do it. But it can not install Hotfix, that notices some error, i have tried two, or three Hotfixes, but that still notices some error.
I have read that there can be some problems with installing .zip files, i have found it in FAQ ( http://forum.xda-developers.com/showthread.php?t=1066824 )
"
I CAN'T INSTALL CUSTOM.ZIP ON CWM RECOVERY BUT WITH XRECOVERY I CAN...
This script it's amend script, so it need to be translated to edify script for work on CWM recover
"
This should be my problem, i think...
How can i translate script to work in CWR ?
Thx
BOSSno.21 said:
Hi guys !
I have installed v.5 .That version works correctly. I have tried to install v. 6 after v.5 but that brokes again at SE logo after reboot.
I want to ask, how get i Hotfixes to the system ? I have downloaded Hotfix .zip files, but i do not know how i should apply that.
Thanks
Click to expand...
Click to collapse
Well V6 is clockworkmod recovery flashable only!
galvic said:
Well V6 is clockworkmod recovery flashable only!
Click to expand...
Click to collapse
So, i do not understand. That brokes in CWM when i have tried to apply Hotfix. CWM notices some script problems.
I am going to try it again later.
As you did with the rom, use EXACTLY the same procedure except the wiping (wipe cache, battery stats, factory reset).
That's how you install a hotfix
1. First you need to root your phone. The easiest way is by using Superoneclick:Superoneclick
2. Then you need to install xRecovery because CWM cannot be instaled on Stock Rom( I tried but with no success). You can use this: AIO Automatic Instalation Script
3. After that download this package:cwmr3_xrecinstall and put it into SD card
Boot into xRecovery and instal this custom zip.
This is how i did it and get CWM for STOCK ROM
I can't install(or run) xRecovery on my Stock rom,
The device is already Rooted with SuperOneClick, and have a root file manager, installed busybox, terminal and the AIO script, but isn't work, just install the dualtouch driver, the JIT but it says the xRecovery is installed as well, but when I reboot the phone and try to enter in recovery just turn on normaly.. I don't understand what happen.. any idea??
I did this 4 times this weekend while testing stock ROM again on my Mini Pro:
Root with SuperOneClick.
Busybox from market (with Busybox Installer).
AAIS from [Updated]AIO Automatic Installation Script For X10 Mini/Mini Pro-Firmware 2.1.1.A.0.6
Install XRecovery from AAIS.
Install CyanoComb (the version I still had in SD) that comes with CWM, reboot in CWM.
Install whatever ROM you like using CWM
Hehe you guys must have missed something.. I have done like 4 resetts with seus on 2 days..
Root then aais to install cwm and that worked for me directly.. No probs here..
i've install xrecovery for mini not pro
i've want to install some roms but it wants cwm recovery can i use xrecovery instead of cwm
sorry for my ****kin eng
xrecovery is the old s/w and cwm is the updated and newer version so it basically replaces the xrecovery.
it is much powerful and has more options to use. even the devs can write scripts for it so it is much easier for them too.
are you having problems with cwm that you are using xrec? maybe someone with that knowledge can help you sort that out.
i use cwm and it is absolutely easy to use.
regards,
Tim