Alright this Is what I did...I downloaded the newest MR2 Gingerbread Radio...then downloaded BAMF remix 1.7. Went into hboot flashed radio...rebooted then went to Rom Manager rebooted to recovery and flashed BAMF Rom...did wipe data before flashing Rom. I then recieved a couple of error messges followed by (bad). Then I did a system restore, I just rooted a couple of days ago and did a nand backup of everything stock. Now I don't have data, everytime I go into hboot it goes to the "do you want to update" part and to top It all off while freakin out trying to fix my screw up I lost Rom Manager so I don't have CWM. I came from stock radio and BAMF Remix 1.7 before all of this.
As you all can tell I'm new to the Thunderbolt. Did alot of reading these forums and watching Youtube before attempting this. I've "googled" for the past hour before coming to you guys...hope someone can help. Thanks in advance.
caspersfi said:
Alright this Is what I did...I downloaded the newest MR2 Gingerbread Radio...then downloaded BAMF remix 1.7. Went into hboot flashed radio...rebooted then went to Rom Manager rebooted to recovery and flashed BAMF Rom...did wipe data before flashing Rom. I then recieved a couple of error messges followed by (bad). Then I did a system restore, I just rooted a couple of days ago and did a nand backup of everything stock. Now I don't have data, everytime I go into hboot it goes to the "do you want to update" part and to top It all off while freakin out trying to fix my screw up I lost Rom Manager so I don't have CWM. I came from stock radio and BAMF Remix 1.7 before all of this.
As you all can tell I'm new to the Thunderbolt. Did alot of reading these forums and watching Youtube before attempting this. I've "googled" for the past hour before coming to you guys...hope someone can help. Thanks in advance.
Click to expand...
Click to collapse
The MR2 radio is for Ginger roms and new froyo leak. Bamf remix 1.7 is an older froyo leak. Try a bamf Ginger rom.
Also, don't post questions in development section. There's a q&a section for this stuff.
And research before flashing things. You should understand what's going on before modding your phone.
Sent from my ADR6400L using XDA Premium App
You can't use a gingerbread radio with a froyo ROM. You need to re-flash a froyo radio in bootloader. After that READ the whole post before you flash away and wreck your phone
Can we change the word noob to "dumb and lazy"?
Sent from my ADR6400L using XDA Premium App
I'm sorry guys I meant I tried to flash the BAMF 2.0-5 and this happened..I'm sorry for posting here I'll move along.....thanks
We will live. good luck!
Sent from my ADR6400L using XDA Premium App
If you want to use the MR2 Radio, download a gingerbread based rom. If you would like to use a gingerbread based rom, download the MR2 Radio or the Alpha leak (I would recommend the MR2 radio).
If you can't get into CWM through hboot, put your SD card in a card reader or another phone, and delete the PG05IMG.zip file. If you have the MR2 radio flashed right now, Remove the PG05IMG.zip file, and put a gingerbread based rom on your SD card. Now that the radio is off your SD card, you can access recovery through hboot. Now just flash the GB rom.
caspersfi said:
I'm sorry guys I meant I tried to flash the BAMF 2.0-5 and this happened..I'm sorry for posting here I'll move along.....thanks
Click to expand...
Click to collapse
Casper, delete the Radio (PG05IM file) from your SD card. Boot into recovery and Clockwork mod should pull up. Manually install Das Bamf 2.0 vers 5 file again. Sometimes you get errors using ROM Manager.
Richpopski123 said:
Can we change the word noob to "dumb and lazy"?
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
Depends on you.
Sent from my ADR6400L using XDA Premium App
Related
Ok, so the info right now
Very first original pg05img.zip is loaded.
I got no super user and no cw.
Had Das bamf 1.6.3 and radio from OP
Switched to Das bamf 2.0-5 and ginger radio
Switched back to a back up of 1.6.3 and radio because of possible brick via hboot old radio first then into cw to restore back up.
Everything flashed good no hiccups except one problem, nothing will download. Too clarify that, all apps function properly, updates act normal, apps download from market normal, data signal strong, full 3g, no 4g in my area, browser runs fast, sync runs, no problems except that when I try to download a theme from xda download fails. Tried mirrors, fail. Tried my mp3 download app, download fail, Rom download from Rom manager, fail!
I assumed radio, reloaded radio in hboot, still fail.
While shuffling pg05img.zip around my SD card I placed the original zip for rooting process for manual root when the tbolt first got rooted. Thinking I was trying a radio.... Oops.
So now I'm running. Just fine. Except still no way to download threw phone. And as an added bonus I can not get into CW to flash a backup. ROM manager says I'm not rooted and have no super user. Hboot screen says s-off and when I go to recovery option there I get the triangle ! Sign. Yet Rom manger says there is an update for my CW available, but guess what happens when I try to download that....
Please give me ideas, if I left info out, I'm sorry just ask me.
Thanks a mill
Sent from my ADR6400L using XDA App
If you followed the root process correctly and have SU permissions with the SU app then you are ok with that.
Next make sure you can access root through apps like rom manager and Tit backup.
Now if those run fine in stock then make a backup of that through rom manager or recovery.
Download all the roms and radios associated with the appropriate roms. Next flash the PG05IMG with bootloader and make sure the TB boots to stock, if you have no connection there, that is ok because it is supposed to work with specified ROM.
Now make sure you connect to a PC and mount the SD and remove PG05IMG. Put the rom on the / of the SD.
Run rom manager and install the rom from SD. Wipe all data, cache, and dalvik cahce. Once the rom has successfully installed, you should have connection and everything ok.
It's best to follow these steps from a working backup that way you can always revert and redo.
It's best to have a stock rom back up with all of your settings incase you need it for any purpose.
If you have any questions please contact me or a dev.
Assuming you still have root with s-off I would flash this from jcase's thread in HBOOT:
Custom upgrade PG05IMG_MR1_upgrade.zip (md5sum : 7960c7977c25b2c8759605be264843ea)
http://www.multiupload.com/NEANZBS5S4
That should fix your radio and whatever else is broke. Then just flash whatever ROM you like over it.
kazuma5401 said:
Ok, so the info right now
Very first original pg05img.zip is loaded.
I got no super user and no cw.
Had Das bamf 1.6.3 and radio from OP
Switched to Das bamf 2.0-5 and ginger radio
Switched back to a back up of 1.6.3 and radio because of possible brick via hboot old radio first then into cw to restore back up.
Everything flashed good no hiccups except one problem, nothing will download. Too clarify that, all apps function properly, updates act normal, apps download from market normal, data signal strong, full 3g, no 4g in my area, browser runs fast, sync runs, no problems except that when I try to download a theme from xda download fails. Tried mirrors, fail. Tried my mp3 download app, download fail, Rom download from Rom manager, fail!
I assumed radio, reloaded radio in hboot, still fail.
While shuffling pg05img.zip around my SD card I placed the original zip for rooting process for manual root when the tbolt first got rooted. Thinking I was trying a radio.... Oops.
So now I'm running. Just fine. Except still no way to download threw phone. And as an added bonus I can not get into CW to flash a backup. ROM manager says I'm not rooted and have no super user. Hboot screen says s-off and when I go to recovery option there I get the triangle ! Sign. Yet Rom manger says there is an update for my CW available, but guess what happens when I try to download that....
Please give me ideas, if I left info out, I'm sorry just ask me.
Thanks a mill
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
(I know you said u can't download, but I think you said u could download from market?)
Have you gone to the market and downloaded "super user" app?
Try that and go to rom manager and attempt to flash the recovery again
And try downloading astro file manager - in settings it should have an option to download anything through browser...
See that's the prob, no Su app or permissions. I followed the original manual process to the tee. That was months ago. Iv been rooted. Up until today there have been zero problems. Today I accidently reflashed the original zip then lost su. But hboot screen says I have s-off. Doesn't that mean I have SU
Sent from my ADR6400L using XDA App
kazuma5401 said:
See that's the prob, no Su app or permissions. I followed the original manual process to the tee. That was months ago. Iv been rooted. Up until today there have been zero problems. Today I accidently reflashed the original zip then lost su. But hboot screen says I have s-off. Doesn't that mean I have SU
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
If hboot says s-off, I'd still try what I suggested a few posts up.
I downloaded superuser from the market just fine then ran manager still says no superuser present
Sent from my ADR6400L using XDA App
I would try what you suggest it up there but as I said I cannot download and I'm not near a computer
Sent from my ADR6400L using XDA App
for whatever reason my thunderbolt just refuses to download just keep saying download failed
Sent from my ADR6400L using XDA App
kazuma5401 said:
See that's the prob, no Su app or permissions. I followed the original manual process to the tee. That was months ago. Iv been rooted. Up until today there have been zero problems. Today I accidently reflashed the original zip then lost su. But hboot screen says I have s-off. Doesn't that mean I have SU
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
Okay Im lost Idk what I did but I'm very new to this mi HTC thunder is having problems and i need helpvwell its like i cane get to my apps r homesceen plz help
I bought my tbolt about 2 weeks ago off someone, and it is already rooted with Thundersense 1.45. I am completely new to Android and am wanting to switch to either a Gingersense rom or a bamf rom. I've been reading the forums daily on how to do it and I think I have the right idea.
My question is what is all needed rom? radio? kernel?
I already have a folder named PG05IMG.zip on my sd. Do i replace that or erase it or what? lol
im also using a Mac if that matters..
Appreciate whoever helps.
Ive downloaded the BAMF sense3 shooter final-RC2 and the MR2.5 radio.
whats next?
v36sedan said:
Ive downloaded the BAMF sense3 shooter final-RC2 and the MR2.5 radio.
whats next?
Click to expand...
Click to collapse
The BAMF team recommends the MR2 radio which I have reverted to from the MR2.5. I've used both on this ROM and no issues with either. You can flash in any order, but this is what I do.
-Verify you downloads by checking MD5 sums. There is a thread on this if you need to know more
-Make sure both files or on your SD card folder
-Go to CWR (recovery) wipe all data, wipe cache, wipe dalvik cache, wipe battery stats
-Install ROM zip from SD card
-When complete, select reboot and do a battery pull
-Replace battery, hold volume down + power until you boot into Hboot
-The radio will then install from there
-DO NOT do anything stupid like pull the battery while flashing the radio!
All done!
do you have a link to the MR2 radio?
the one in the "official thread" is suspended..
should i back up this current rom as well thru cwr or rom manager?
Here is the link For MR2 :
http://forum.xda-developers.com/showthread.php?t=1115714
As far as Rom very stable it's the Gingeritis v1.0 Final :
http://forum.xda-developers.com/showthread.php?t=1084474
Appreciate it.
Sent from my ADR6400L using XDA App
My phone keeps giving me an error when I try and back up my current rom or go into cwr..
also neither of those links worked, says the account has been suspended. ?
Sent from my ADR6400L using XDA App
Before i post those link they was working maybe they will back live again later . I personal use the new Radio ver MR 2.5 with the Gingeritis v1.0 Final and it's work for me perfect withou loop boot... (but i test it now and also can't download it..)
I got the Rom file in my PC i can mail it to you , i also got the MR2 but not sure if it's real this file or not ..... check if you can upgrade direct to the MR2.5 and i can email you the Rom file and the MR 2.5 Radio file . i also use the Old Ver of the imoseyon_leanKernel_v3.0.1GBtest1 which work perfect with this rom (unless call recording app in my phone) and i can email you this file to.
As for Backup try to use the RomManager App. work for me Perfect .
I was running Das BAMF 3.0 and then switched to anothe rom. I restored das BAMF and now I keep getting the message Sorry! Process system is not rssponding. I cant get past this screen.
If I reboot into recovery the I get an update message it wants to update:
[1] MDM9K
[2] Radio_V2
If I say yes to update then after the update I reboot and back to "Sorry Process...
If I say no then it reboots and same thing!
Help!
Wipe and reflash. It's what I had to do when mine did the same thing.
Sent from my ADR6400L using XDA Premium App
How?
Thanks for the response! How do I wipe... I cant get to any screens.
Donloric1 said:
Thanks for the response! How do I wipe... I cant get to any screens.
Click to expand...
Click to collapse
I had the same question when I started out. I'll make it easy on you.
Go into recovery, use the volume buttons to toggle up and down. Go to wipe data / factory reset. Select it and then confirm it. Then go to wipe cache partition and do the same. Then go to advanced and select wipe davlik. THAT IS HOW TO WIPE. This is recommended to do before flashing a new ROM.
Can't get past the update
I cant get past the update in recovery
Donloric1 said:
I cant get past the update in recovery
Click to expand...
Click to collapse
That's easy to get past. Just load a PGIMG05.zip file onto the ROOT of your SD card. ROOT means without being in any folders. If you're on BAMF 3.0 then you're on Gingerbread. So find the RUU file for unsigned Gingerbread RUU and place it on the ROOT. Then do an Hboot. Which is Power down and volume up at the same time when the phone is off. Make sure you don't have any PGIMG05 files on the ROOT. You probably do because you rooted your phone. If you don't you could end up with S back on.
**You did flash the correct Gingerbread radio...right?
**I have no clue where the Gingerbread RUU is. If you find it, please post it. It will be a fairly large file. Probably around 300mb+
EDIT:
I'm sorry but the RUU for Gingerbread isn't out yet. Try Hbooting the MR1 then Hboot the MR2 Radio RUU which is 2.3.4 base.
Link to Jcase radio thread: http://forum.xda-developers.com/showthread.php?t=997724&highlight=RUU
I'm pretty sure, you'll need to flash the "PG05IMG_Mecha_VERIZON_WWE_1.13.605.7_Radio_1.16.00.0402w_NV_8k_1.41_9k_1.64_release_182727_signed.zip" on that page which should be the last link.
Take your SD Card out, put in a reader or another Android phone and delete the radio file from it.
Sent from my ADR6400L using XDA App
I've had this problem too and I've wiped and reflashed from scratch to fix it.
But this happens to all my backups, making nandroid backups virtually useless to me now. Anybody know why this happens? I've never had a problem like this before and it started after trying to restore from the new CM7 back to bamf 2.1....
A common solution would be to backup the SD Card and reformat it in Clockwork or with SDFormatter.. NOT IN WINDOWS.
When the house gets dirty, you have to clean it.
Sent from my ADR6400L using XDA App
I have tried to format/system and every other piece of advice i can find I still cant get any nandroids to restore... Any ideas?
I have search every possible thread regarding restoring a nandroid and have tried every possible fix... my only solution, which DID WORK, was to format/system, do a full wipe of all three, and then flash the original zip, I cant use any nandroids at all!!! if any one know why please tell me how to restore a nandroid for future use. thanks
format did not work for me either.
restores worked for me at when i came off of Synergy's ROM back to bamf3.0, but coming outta CM7 to bamf 3.0 busted it again...very strange.
str1der_D said:
format did not work for me either.
restores worked for me at when i came off of Synergy's ROM back to bamf3.0, but coming outta CM7 to bamf 3.0 busted it again...very strange.
Click to expand...
Click to collapse
I am using th3orys inj3ct rom and just wanted to see what Synergy was all about, when I wasn't impressed i tried to restore my nandroid (which i made right before i flashed synergy) and that is when all the trouble started... i tried everything that I know of and just had to reflash the original ROM and start from scratch, sux but at least my phone is back on.
I had this issue over the weekend. However I did do a restore prior to getting the error... I was texting my gf, and all of a sudden my screen wouldn't turn on... Pulled the battery and when i booted up I kept getting the error.
I had a PG05IMG.zip on my SD card so if I tried to boot to recovery from boot menu it wouldn't let me.
I took my SD card and plugged it into a PC using an adapter. Deleted the PG05IMG.zip and then booted to recovery. Restored my latest backup (3 days old) and everything worked.
Sent from my ADR6400L using XDA App
What the hell.. this same thing happened to me last night - never had this happen before.
Happened after restoring a backup of Das Bamf 3.0 RC 3
Guess I have to wait for my wife to come home with her old droid so I can plug my sdcard in to her phone and get rid of the pgimg zip
Hello,
i downloaded the mr2 http://forum.xda-developers.com/showthread.php?t=1160346&highlight=ota+mr2 i downloaded and installed, after verifying the md5, i dropped the file onto the root sd card and then i rebooted with hboot, which i believe is when the phone is off and i power it on holing down the power and down volume buttons, after the radio was installed i got no signal, how can i fix this problem?
You're unrooted on stock?
mattsonhistb said:
You're unrooted on stock?
Click to expand...
Click to collapse
I'm rooted, rooted with a guide here on xda forums and it was a successful root and i had signal, now i wanted to get bamf and i need mr2, after i installed the radio i had no signal at all
You need a ROM that's compatible with that radio.
Sent from my ADR6400L using XDA Premium App
setexascustoms said:
You need a ROM that's compatible with that radio.
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
i got signal now, i went ahead and installed bamf along with the radio, which gave me no signal, the reasoning was because i saw another thread about someone was asking if they should install the radio first, or the ROM first, then later they said they got it to work....well MINES WORKS NOW!!!
Well i had BAMF and it was working fine and all, then it just froze...ok i just rebooted and it was fine, and again it froze and i had to remove batter. So i decided to go back to when i originally rooted the phone, which has the mr2 radio, and since it is what causes me to have no signal. How do i remove the mr2? me taking a wild guess, would i need to flash PG05IMG_mr1_upgrade? http://forum.xda-developers.com/showthread.php?t=996616
problem is fixed now, i went ahead and flashed PG05IMG_mr1_upgrade from the link and it works fine now, for some reason mr2 does not allow me to get signal at all
Hi guys,
Im new to the rezound but flashed several different froyo/GB roms on my DX so I know basics but Im a little lost between flashing between roms on the rezound since there are kernals and other stuff that was rarely messed with on the DX. Not to mention the DX had a linux iso to flash to OTA froyo and GB which would be nice if someone did that for the rezound, would deffinetly be worth a donation!
Im currently on Scotts cleanrom 4.3 standard. I unlocked the bootloader with the htc coded and have the amon ra recovery installed, and when i flashed the rom i installed the patch, then flashed the ph98img file (ph98img is a kernal?). I tried going to rezrom v3.4 earlier today and once I finished setup I would go into a bootloop. It was sense 3.6 so I didnt think there were animations to disable or anything weird, Im not sure I missed a step or used the wrong file. I ended up just flashing back to cleanrom till I figure this stuff out.
So how would I go about switching to other ics roms, what do I need to worry about/look out for in regards to compatability?
Also What do I need to do to go back to stock so I can get the OTA ics when it comes out (if I even want to)? I did do a nand backup and some backups with titanium pro but I just hope I saved the right stuff.
Thanks for any help!!
66racer said:
Hi guys,
Im new to the rezound but flashed several different froyo/GB roms on my DX so I know basics but Im a little lost between flashing between roms on the rezound since there are kernals and other stuff that was rarely messed with on the DX. Not to mention the DX had a linux iso to flash to OTA froyo and GB which would be nice if someone did that for the rezound, would deffinetly be worth a donation!
Im currently on Scotts cleanrom 4.3 standard. I unlocked the bootloader with the htc coded and have the amon ra recovery installed, and when i flashed the rom i installed the patch, then flashed the ph98img file (ph98img is a kernal?). I tried going to rezrom v3.4 earlier today and once I finished setup I would go into a bootloop. It was sense 3.6 so I didnt think there were animations to disable or anything weird, Im not sure I missed a step or used the wrong file. I ended up just flashing back to cleanrom till I figure this stuff out.
So how would I go about switching to other ics roms, what do I need to worry about/look out for in regards to compatability?
Also What do I need to do to go back to stock so I can get the OTA ics when it comes out (if I even want to)? I did do a nand backup and some backups with titanium pro but I just hope I saved the right stuff.
Thanks for any help!!
Click to expand...
Click to collapse
That is a lot of questions, but I'll answer what I know:
(ph98img is a kernal?): It can be several things, so you just need to know what you are installing. In this case it was probably a firmware patch.
I tried going to rezrom v3.4 earlier today and once I finished setup I would go into a bootloop: You will need to install the RezROM patch after you install the ROM. It will fix the bootloop.
So how would I go about switching to other ics roms, what do I need to worry about/look out for in regards to compatability?: Read the instructions in each ROM's OP. It will tell you what is compatible and what you will need to do to make it work well. There may be issues going back and forth from ICS to GB, but usually the instructions will give you a heads up. In any case, ALWAYS do a nand backup before flashing.
What do I need to do to go back to stock so I can get the OTA ics when it comes out (if I even want to)?: I believe there is a thread on this. I haven't done it, so I can't help on this question.
Good luck!
66racer said:
Not to mention the DX had a linux iso to flash to OTA froyo and GB which would be nice if someone did that for the rezound, would deffinetly be worth a donation!
Click to expand...
Click to collapse
You can't flash it backwards and you can't go back to a factory-locked bootloader, but other than that the RUUs accomplish the same thing as a DX SBF.
66racer said:
when i flashed the rom i installed the patch, then flashed the ph98img file (ph98img is a kernal?).
Click to expand...
Click to collapse
PH98IMG.ZIP is a reserved filename. If you boot to the firmware menu the Rezound will automatically flash anything in a file by that name in the root of the SD card. Apparently HTC uses different numbers in the file name reserved on each phone, and the Rezound is "98". Other than that, there's no telling what's in the file -- it can be a huge ROM or just a tiny kernel patch.
66racer said:
I tried going to rezrom v3.4 earlier today and once I finished setup I would go into a bootloop.
Click to expand...
Click to collapse
Did you notice that RezROM has custom install instructions? Is it possible you skipped that step?
66racer said:
What do I need to do to go back to stock so I can get the OTA ics when it comes out (if I even want to)?
Thanks for any help!!
Click to expand...
Click to collapse
Easiest way is to flash the leaked ICS RUU. I think in your case you have to actually extract the PH98IMG.ZIP file and flash it manually. And while that's supposedly a release candidate, it's still having a few problems with battery life and heat, so you might not want to flash it till the OTA you want is actually released.
Thanks for the help guys, that helped
Ugh... I had those exact same problems and questions and I even came from the DX.. HTC is so complicated. I'm frustrated with not being able to flash any other roms other than Scott's CleanRom.. The Ph98img.zip file always makes me reboot the phone and when I do delete it and get back to recovery, I am always in a bootloop mode with BAMF and RezRom.
Sent from my ADR6425LVW using XDA
artisticsoul79 said:
Ugh... I had those exact same problems and questions and I even came from the DX.. HTC is so complicated. I'm frustrated with not being able to flash any other roms other than Scott's CleanRom.. The Ph98img.zip file always makes me reboot the phone and when I do delete it and get back to recovery, I am always in a bootloop mode with BAMF and RezRom.
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
I don't know about BAMF, but with RezROM, you just need to flash the patch in his post, after getting rid of the PH98IMG file. That will cure your bootloop problem.
---------- Post added at 07:52 AM ---------- Previous post was at 07:51 AM ----------
66racer said:
Thanks for the help guys, that helped
Click to expand...
Click to collapse
You're welcome! Remember to click the Thanks button if any of us have been of service.
Enjoy!
And how would I delete that file if I cannot get into my phone? Do I flash the rom while my phone is hooked up to the computer and delete from there?
Sent from my ADR6425LVW using XDA
artisticsoul79 said:
And how would I delete that file if I cannot get into my phone? Do I flash the rom while my phone is hooked up to the computer and delete from there?
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
Just use the search on this site and type in how to remove ph98img.zip . Only reason I say that is because there are a few threads about the issue and a few different techniques. Easiest, I just used my old OG droid to remove the file if I bootlooped. If you don't have an old phone, using a cheap card reader pop it into that and remove the file. Booting into recovery if you can get into it , then mount the card and remove file.
Like I said , not trying be an ass telling you to search I just can't recall all the different ways.
---------- Post added at 08:45 AM ---------- Previous post was at 08:41 AM ----------
66racer said:
Hi guys,
Im new to the rezound but flashed several different froyo/GB roms on my DX so I know basics but Im a little lost between flashing between roms on the rezound since there are kernals and other stuff that was rarely messed with on the DX. Not to mention the DX had a linux iso to flash to OTA froyo and GB which would be nice if someone did that for the rezound, would deffinetly be worth a donation!
Im currently on Scotts cleanrom 4.3 standard. I unlocked the bootloader with the htc coded and have the amon ra recovery installed, and when i flashed the rom i installed the patch, then flashed the ph98img file (ph98img is a kernal?). I tried going to rezrom v3.4 earlier today and once I finished setup I would go into a bootloop. It was sense 3.6 so I didnt think there were animations to disable or anything weird, Im not sure I missed a step or used the wrong file. I ended up just flashing back to cleanrom till I figure this stuff out.
So how would I go about switching to other ics roms, what do I need to worry about/look out for in regards to compatability?
Also What do I need to do to go back to stock so I can get the OTA ics when it comes out (if I even want to)? I did do a nand backup and some backups with titanium pro but I just hope I saved the right stuff.
Thanks for any help!!
Click to expand...
Click to collapse
Also , another way to switch between roms. If you make a nandroid of the roms and use Con's nandroid recovery helper http://forum.xda-developers.com/showthread.php?t=1547496
Posted here and then follow directions in using it and you can then "swap roms without having to restore the kernel separately.
artisticsoul79 said:
And how would I delete that file if I cannot get into my phone? Do I flash the rom while my phone is hooked up to the computer and delete from there?
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
I've read where there are ways to do this via adb commands, but what I've had to do lately is simply pull the SD card and either put it into a reader or another cell phone, delete the file, then put it back into my phone, boot into recovery, and then flash the patch. I know, it's a PITA, but until we install the new firmware, that's just the way it is.
the way that i do it is hold the battery partially out so you can start it with the sd card partially out... boot into bootloader and click recovery.... then you can push the sd back in... next while in amon ra go to developer menu and select the delete phimg option.
yes this can be tricky but it works when you dont have a sd adapter
This is what I'm running right now and I'm not too happy with it. And also to add that I am unable to launch a few apps and sync contacts pictures to GoSMS.
Sent from my ADR6425LVW using XDA