I was running Das BAMF 3.0 and then switched to anothe rom. I restored das BAMF and now I keep getting the message Sorry! Process system is not rssponding. I cant get past this screen.
If I reboot into recovery the I get an update message it wants to update:
[1] MDM9K
[2] Radio_V2
If I say yes to update then after the update I reboot and back to "Sorry Process...
If I say no then it reboots and same thing!
Help!
Wipe and reflash. It's what I had to do when mine did the same thing.
Sent from my ADR6400L using XDA Premium App
How?
Thanks for the response! How do I wipe... I cant get to any screens.
Donloric1 said:
Thanks for the response! How do I wipe... I cant get to any screens.
Click to expand...
Click to collapse
I had the same question when I started out. I'll make it easy on you.
Go into recovery, use the volume buttons to toggle up and down. Go to wipe data / factory reset. Select it and then confirm it. Then go to wipe cache partition and do the same. Then go to advanced and select wipe davlik. THAT IS HOW TO WIPE. This is recommended to do before flashing a new ROM.
Can't get past the update
I cant get past the update in recovery
Donloric1 said:
I cant get past the update in recovery
Click to expand...
Click to collapse
That's easy to get past. Just load a PGIMG05.zip file onto the ROOT of your SD card. ROOT means without being in any folders. If you're on BAMF 3.0 then you're on Gingerbread. So find the RUU file for unsigned Gingerbread RUU and place it on the ROOT. Then do an Hboot. Which is Power down and volume up at the same time when the phone is off. Make sure you don't have any PGIMG05 files on the ROOT. You probably do because you rooted your phone. If you don't you could end up with S back on.
**You did flash the correct Gingerbread radio...right?
**I have no clue where the Gingerbread RUU is. If you find it, please post it. It will be a fairly large file. Probably around 300mb+
EDIT:
I'm sorry but the RUU for Gingerbread isn't out yet. Try Hbooting the MR1 then Hboot the MR2 Radio RUU which is 2.3.4 base.
Link to Jcase radio thread: http://forum.xda-developers.com/showthread.php?t=997724&highlight=RUU
I'm pretty sure, you'll need to flash the "PG05IMG_Mecha_VERIZON_WWE_1.13.605.7_Radio_1.16.00.0402w_NV_8k_1.41_9k_1.64_release_182727_signed.zip" on that page which should be the last link.
Take your SD Card out, put in a reader or another Android phone and delete the radio file from it.
Sent from my ADR6400L using XDA App
I've had this problem too and I've wiped and reflashed from scratch to fix it.
But this happens to all my backups, making nandroid backups virtually useless to me now. Anybody know why this happens? I've never had a problem like this before and it started after trying to restore from the new CM7 back to bamf 2.1....
A common solution would be to backup the SD Card and reformat it in Clockwork or with SDFormatter.. NOT IN WINDOWS.
When the house gets dirty, you have to clean it.
Sent from my ADR6400L using XDA App
I have tried to format/system and every other piece of advice i can find I still cant get any nandroids to restore... Any ideas?
I have search every possible thread regarding restoring a nandroid and have tried every possible fix... my only solution, which DID WORK, was to format/system, do a full wipe of all three, and then flash the original zip, I cant use any nandroids at all!!! if any one know why please tell me how to restore a nandroid for future use. thanks
format did not work for me either.
restores worked for me at when i came off of Synergy's ROM back to bamf3.0, but coming outta CM7 to bamf 3.0 busted it again...very strange.
str1der_D said:
format did not work for me either.
restores worked for me at when i came off of Synergy's ROM back to bamf3.0, but coming outta CM7 to bamf 3.0 busted it again...very strange.
Click to expand...
Click to collapse
I am using th3orys inj3ct rom and just wanted to see what Synergy was all about, when I wasn't impressed i tried to restore my nandroid (which i made right before i flashed synergy) and that is when all the trouble started... i tried everything that I know of and just had to reflash the original ROM and start from scratch, sux but at least my phone is back on.
I had this issue over the weekend. However I did do a restore prior to getting the error... I was texting my gf, and all of a sudden my screen wouldn't turn on... Pulled the battery and when i booted up I kept getting the error.
I had a PG05IMG.zip on my SD card so if I tried to boot to recovery from boot menu it wouldn't let me.
I took my SD card and plugged it into a PC using an adapter. Deleted the PG05IMG.zip and then booted to recovery. Restored my latest backup (3 days old) and everything worked.
Sent from my ADR6400L using XDA App
What the hell.. this same thing happened to me last night - never had this happen before.
Happened after restoring a backup of Das Bamf 3.0 RC 3
Guess I have to wait for my wife to come home with her old droid so I can plug my sdcard in to her phone and get rid of the pgimg zip
Related
I was running A05PTH3ORY V1.4X and wanted to put on a new kernel to see if I could get better batter life. I flashed Tiamat's kernel and everything seemed to work fine for a little while while it was sitting on my desk. About 30 minutes later I reached over to unlock it and nothing, it had shut off.
I go to turn it on and I get a boot loop on the white HTC screen. I get into recovery to restore a backup and it get a minute into the restore and automatically reboots. So I try again but wipe data/cache first, same thing. So I try to just install a new ROM, same thing, reboots.
Don't know where to go from here....any help?
Can I rename a ROM to PG05IMG.zip and flash it through the bootloader????
schmaltzy said:
Can I rename a ROM to PG05IMG.zip and flash it through the bootloader????
Click to expand...
Click to collapse
No
tbolt ^_^_^
Same thing happened to me. You have to find the correct RUU to flash in bootloader. I flashed the stock RUU. Although I lost root, phone was fine again.
schmaltzy said:
I was running A05PTH3ORY V1.4X and wanted to put on a new kernel to see if I could get better batter life. I flashed Tiamat's kernel and everything seemed to work fine for a little while while it was sitting on my desk. About 30 minutes later I reached over to unlock it and nothing, it had shut off.
I go to turn it on and I get a boot loop on the white HTC screen. I get into recovery to restore a backup and it get a minute into the restore and automatically reboots. So I try again but wipe data/cache first, same thing. So I try to just install a new ROM, same thing, reboots.
Don't know where to go from here....any help?
Click to expand...
Click to collapse
Another member had the same problem as you and what eventually fixed it was a factory RUU run from the computer. You would then need to root the phone again. The other fix to try first is a different Micro SD card. Apparently if the Micro SD is bad or corrupted, when the phone is trying to restore the backup it encounters an error and reboots. If you don't have another Micro SD card then you can try formatting the current one. Formatting the Micro SD card will erase everything, I'm sure you know that. If you want to run a factory RUU from your computer this site has a couple different RUU's to choose from http://dougpiston.com/ThunderBolt/RUU/ Download one of the .exe RUU's not the .zip RUU's. Once you download it to your computer run it from your computer with the phone plugged in and turned on. Running the RUU is a last resort because you'll have to root your phone again, but if you've exhausted all your other options then go for it.
EEdaesung said:
No
tbolt ^_^_^
Click to expand...
Click to collapse
Tbolt! Thanks for the help on the IRC! It worked!
I flashed the MR1 RUU and it got me in. So all is well!
Question though....why? I can understand a boot loop because of my phone not meshing well with the kernel, but why wouldn't it let CWR work correctly?
schmaltzy said:
Tbolt! Thanks for the help on the IRC! It worked!
I flashed the MR1 RUU and it got me in. So all is well!
Question though....why? I can understand a boot loop because of my phone not meshing well with the kernel, but why wouldn't it let CWR work correctly?
Click to expand...
Click to collapse
Had the same problem and cure. I suspected a fubar clockwork only because I was running an older version.
courtesy of my rooted bolt
ILMF said:
Had the same problem and cure. I suspected a fubar clockwork only because I was running an older version.
courtesy of my rooted bolt
Click to expand...
Click to collapse
HMMM.....I was running the most up to date CWR.
Yesterday I unplugged my phone and it wouldn't start. Had to take out battery and SD card to get it to eventually start, but it hung on the HTC white screen.
I can access the clockwork recovery screen, and have even been able to load previous backups and new roms to see if anything will work, but it won't let me get past that white HTC screen.
I feel like I'm close because I can still access the recovery menu, but something's up. So I have a few questions that if anyone can answer I will appreciate more than you know.
1) Is there a way to unroot my phone from the recovery menu/PC access so I can get it replaced by Verizon if it is a hardware problem? I know, I know, I did it to myself, but if there's a way out, I'll take it.
2) What are RUU files and would they somehow fix this? I am not against unrooting and going back to stock, especially after this scare.
3) As of now I have DasBampf 1.8.6 and MR2 radio on the phone. Will the RUU remove these and flash a whole new Radio/ROM? Again, I know I'm an idiot, but I need help. Help me Obi Wan!
4) I'll check back if anyone needs more info. BTW, the phone only boots into recovery *power+down volume* Won't turn on manually. I've tried another SD card, I've tried other ROMS. I have NOT tried any new radios yet, as I'm scared to accidentally brick it.
Thanks in advance.
go into bootloader (when it's off hold power button and volume down until white screen pops up) wait for it to check your sd card, then click wipe data. it should boot up after its done wiping the data, if not you might have to select reboot in recovery.
RUU update.
I flashed the 2.11.605.5 build of the new RUU. It started out fine, and then it failed at user data, system, and one other. Now it's still in the same hanging screen. What the hell!?
Please help me before I **** this thing up even more.
OTA updates are the DEVIL!!!!!! You people need to block them and stop installing the unrooted version while you are rooted with no reguard to your phones safety. If you are rooted install the rooted version of the OTA.
If I helped please use the thank you button and donate a free account to my dropbox http://db.tt/uDc7iw7x
I didn't read the op but if its hanging on htc screen with new ota try flashing the radio the new ota has or an older one. Had that issue with my EVO.
The wrong radio will cause your phone to never pass htc screen.
Sent from my Incredible 2 HD using XDA App
Haven't tried anything new yet, but besides one time this morning, I can't even get to the bootloader. Won't turn on, even with a spare charged working battery. Time to call Verizon and maybe eat the payment, methinks.
Update for anyone interested.
I got onto IRC and contacted Jcase, who had me flash a new RUU, which seemed to fix the problem.
HOWEVER, my phone is still FUBAR, as it shuts off periodically and will not allow me to call out. I managed to go through the entire unroot process and got my phone back to original status. I have a replacement coming from Verizon soon and although I think it's a hardware problem with my phone, I don't think I'll be rooting again anytime before my warranty expires. Thanks for all the help everyone.
need help
Hey guys, I was trying to unroot my thunderbolt but jacked things up. I had it wipe all date, now will not boot Its still rooted. When i go into the reboot mood its by Revolutionary. Info it displays where it gives me options of fastboot, recover, factory reset, simlock, hboot usb and image crc is
Revolutionary
MECHA XD SHIP S-OFF
HBOOT-6.O4.1002
MICROP-/
RADIO-1.49.00.0406v_1
eMMC-BOOT
Idk if that helps. It doesnt reboot or does a looping process. Just stays at the white htc screen and doesnt say anything, and is not the screen where it says htc quietly brilliant. When i go into recovery 4ext recovery touch is whats available, current rom:unknown. Im fairly new so i would greatly appreciate any help, I like this phone alot and would hate to use something else. I dont care if after everything is said and done its still rooted or not. I have my personal info still on my card and a backup on my computer so im safe on that and dont care if i lose everything on the phone. Also i did not try to do the ota update.
Because you wiped all your data to ahead and wipe cache and dalvik cache and system. Then flash another rom.
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
Because you wiped all your data to ahead and wipe cache and dalvik cache and system. Then flash another rom.
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
If you dont me asking, is there a step process you can suggest or point me to? Idk how to flash the rom and am new to this scene.
When flashing a rom. Wipe caches (cache and dalvik cache), wipe data (most of the time I recommend doing this), and system/boot partitions. Then after wiping all of those choose the option to flash a rom( I haven't used clockworkmod recovery in ages and I don't remember what they list that option as). When the installation is completed reboot and if all goes well you should be running a custom rom of your choosing. I would suggest you ditch cwm for 4ext recovery just as soon as you can. Cwm has some unusual bugs where the caches may not be properly wiped and your rom won't boot because of this.
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
Cwm has some unusual bugs where the caches may not be properly wiped and your rom won't boot because of this.
Click to expand...
Click to collapse
I know back in the EVO days of no 4EXT Virus had a SuperWipe. It would wipe everything 3 times in CWM. If you are persistent to keep CWM you might want to try that... I think I have it somewhere I can make compatible for the Thunderbolt. But it is highly recommended to use 4EXT instead.
I had it at one point too but wiping 3x or 10x just to flash a rom is ridiculous.
Sent from my ADR6400L using Tapatalk 2
Hi,
I accidentally updated to Gingerbread on my Thunderbolt, and I forgot I rooted my phone, by the time I remembered it already had a blue android and an explaimation mark. So I did some random crap, and probley made it worse.
First I did the vol down power thing went to factory reset it loaded CWM v4.0.1.4
I wiped cache patition
Dalvick cache
and Battery stats
then I wiped data/factory reset
It loaded like it was brand new everything seemed fine till I updated and did same thing so I wiped the data again and now it keeps auto updating so I have to keep my internet off
and it's annoying as crap
I'm a noob so I don't understand stuff
should I go ahead with this guide:
http://forum.xda-developers.com/showthread.php?t=1009423
I couldn't understand it and if your not rooted why would you unroot I don't get that part...
Do I still have root?
What does flash exactly mean?
Current Specs (I don't know what to give but I'll guess)
Thunderbolt
Top says
Mecha XD S-OFF
HBOOT 6.04.1002
eMMC-boot
Android Version 2.2.1
(tell me if you need any other info)
Should I upgrade to gingerbread any way
Download a customer rom, put it on your sd card and flash it in CWM. I'm running BAMF forever and like it. There are plenty of roms to choose from. This should stop the update. After running the rom if you decide you like stock better you can flash the stock rom back and take the update. You will loose root.
Pull the update off the SD. It will stop flashing it
Sent from my ADR6400L using xda premium
Kidney Poker said:
Pull the update off the SD. It will stop flashing it
Sent from my ADR6400L using xda premium
Click to expand...
Click to collapse
I had a friend who's phone auto updated and is stuck on the htc boot screen. Will deleting the update off the sd card work also? Her phone is not rooted, just hoping to save her from having to replace it.
And how do you forget you rooted your phone?
If pulling the update off the sd what do i need to look for
i have a similar problem
my wifes phone is rooted though. it had a stock rom and she autoupdated
now i can only go to recovery mode.
is there a way to fix this and save the stuff on her phone
waltersobchak96 said:
i have a similar problem
my wifes phone is rooted though. it had a stock rom and she autoupdated
now i can only go to recovery mode.
is there a way to fix this and save the stuff on her phone
Click to expand...
Click to collapse
1) The phone will not boot all the way up?
2) is the recovery stock or CWM?
3) do you have a recent back up made?
4) do you have s-off?
jett2314 said:
1) The phone will not boot all the way up?
2) is the recovery stock or CWM?
3) do you have a recent back up made?
4) do you have s-off?
Click to expand...
Click to collapse
1. it boots up all the way, turns off after 10-20s each time, regardless of what action i'm taking
2. cwm recovery
3. no backups recent or not
4. i don't know if i 'have it' but when i load hboot the status is 's-off'
Does it crash or shut off? Maybe a hardware problem?
It powers down the normal way.
waltersobchak96 said:
It powers down the normal way.
Click to expand...
Click to collapse
If you clear the cache, the shutdowns will stop.
But the OTA will download again, and in a few days you will have to repeat the process.
A custom ROM fixed me, but now the same thing poped up.
May go back to stock .... trying xdabolt, but in the process lost my data.
Kidney Poker said:
Pull the update off the SD. It will stop flashing it
Sent from my ADR6400L using xda premium
Click to expand...
Click to collapse
What am I looking for on the SD card to remove?
sounds like you still have s-off. Anything you are trying to save like app data is gone if you do not have a back up. I would down load a customer rom or even one of the rooted stock versions with the latest OTA and flash that with CWM recovery. Be sure to clear cache and dalvick wipe first when you flash it. There are RUU you could use to return it to stock, but you will lose root. I'm running BAMF forever 1.0.9 and like it. Play around with some roms and if you don't like them use a RUU to restore you back to stock. Most important is make sure you read up on things first.
Hey I endded up just unrooting using this video
(can't show video url)
(Search how to unroot on youtube you should see it by nat3mil and I think that's only if you have revolutionary)
and I guess the video would work too.
If you restored to factory settings using power and vol down buttons and wiped the data in the revolutionary thing, and then followed the video...
phones working now and the video's idiot-proof
just posting this if anyone else needded to unroot
syed2007 said:
and the video's idiot-proof
Click to expand...
Click to collapse
You would think but I have seen people who after being on here a year still don't know the difference between flashing something in ROM manager or recovery.
Sent from my ADR6400L using XDA App
unrooting is good and all, but if that happens again, just look around for the newest ruu and find a rooted version. most ruu get rooted that day... heck i had 2.11.605.5 rooted b4 verizon released it (the 2nd leak, the one WITH working vm notifications) thanks to eris of course. then you'd be up to date, stock, rooted... all you'd have to do is wipe dalvik, cache, and system... keep the data (if coming from sense 2.1 rom) and you'd be good.
i don't mess with sense 2.1/3.0 hybrid or 3.0 roms anymore, for this very reason. a ton of incompatibilities between the roms and framework, causing you to have to wipe data when switching... what a pita! i haven't wiped data in months. keep the data always to make life easier...
if you have problems, use clockwork's "fix permissions" and reboot. problem not solved? then retry rom installation WIPING EVERYTHING, then at least you tried to keep your stuff. titanium backup is great for backing up apps + data, so you can import the data back when you're stable on the new rom... just restore the apps + data for the necessary apps, and app only for the stuff that doesn't mnatter... never restore system apps + data for roms with severely different basebands or from completely different roms. unrooting won't be necessary next time
I had my phone half rooted, OTA came and I selected to defer, well I forgot and now I have the security warning.I tried flashing through the bootloader on my SD card the stock file and I still have the security warning. I use my phone as my internet source so it's been a big PITA. The phone starts, goes to 1x, then 4G, then restarts over and over.
Won't load into recovery, won't factory reset, using HBOOT USB and the command prompt the device isn't recognized.
Right now its as follows:
S-ON
1.04.0000
1.16.0223r
Feb 23 2011, 20: 42:55
Back to using my OG Moto DROID and I am going insane!! Any help would be GREATLY appreciated!!!
Wiped dalvik and flashed a new rom. Works fine now. Had to use a new radio but still.
tapatalk on thunderbread
flip218 said:
I had a friend who's phone auto updated and is stuck on the htc boot screen. Will deleting the update off the sd card work also? Her phone is not rooted, just hoping to save her from having to replace it.
And how do you forget you rooted your phone?
Click to expand...
Click to collapse
If the phones rooted you can prolly get into recovery VIA hboot.
If its not rooted you can prolly find a ota ruu and flash it in hboot. U can do that if its rooted too but ull lose root. Or if its a locked s off there's methods to roll back to factory and turn s on. And yes delete the orig update off the card
RobsCavZ24 said:
I had my phone half rooted, OTA came and I selected to defer, well I forgot and now I have the security warning.I tried flashing through the bootloader on my SD card the stock file and I still have the security warning. I use my phone as my internet source so it's been a big PITA. The phone starts, goes to 1x, then 4G, then restarts over and over.
Won't load into recovery, won't factory reset, using HBOOT USB and the command prompt the device isn't recognized.
Right now its as follows:
S-ON
1.04.0000
1.16.0223r
Feb 23 2011, 20: 42:55
Back to using my OG Moto DROID and I am going insane!! Any help would be GREATLY appreciated!!!
Click to expand...
Click to collapse
Anyone, or flash to Gingerbread? I really need my 4G my OG DROID battery is f**ked, I NEED THIS PHONE WORKING!
I think i might have got to comfortable with my phone and possibly screwed something up in the process.
I recently have been Installing and Removing various ROMS on my phone so I can find one I am happy with and stick to as a DAILY.
I recently deleted from the SD Card all the folders in it besides DCIM, MUSIC, and my own Media. I figured its just an SD Card even if I removed it the phone should still operate. But I haven't touched anything Internally on the phone itself. Just always making CLEAN installs before installing ROMS under Amon Ra WIPE ALL. Which it skips my SD.
So for some reason now I have no Mobile Network on my phone it says its Disconnected. It also shows Full bars but with a TRIANGLE
over it now. I want to go back to regular data. I have a Nandroid Backup of my HTC Rezounds FACTORY ICS Build. While it help if I reverted to that? and started over with the ROM I like?
Have you tried long pressing on Mobile Network in settings and seeing if you it shows LTE/CDMA?
It does, and it is selected.
Take a look at this.
I found a way to take it off of ROAMING. In system select I switched the CDMA ROAMING MODE from Automatic B (I think it was) to Home.
I have a feeling it has something to do with a rom I installed last night. MIUI it might have change some options in the phone internal system
to thinking its not in the US. Im running stock ICS HTC at the moment from my NAN backup of Amon Ra. But at the moment its showing FULL SIGNAL BARS
& then seconds later no Signal Bars with an X over it. The verizon wireless rep told me that I was connecting to their SERVERS. I can also make calls but only under Automatic B settings in Roaming.
Im not sure what to do at this point. I wish there was someway I could reset the phone SIGNAL OR DATA OR CONNECTION SETTINGS or radio or something. o DEFAULT. I even reset back to my NANDROID Backup and WIPED all before I did that and I was still having the same problem. It doesnt make sense to me unless its a TOWER near by that is Out of order.
Sent from my ADR6425LVW
Im stumped
I would appreciate anyone that can help shed some light on this.
ChuckZv2 said:
I would appreciate anyone that can help shed some light on this.
Click to expand...
Click to collapse
You always have the option of flashing a RUU and with that putting your phone back to bone stock.
Sent from my ADR6425LVW using xda premium
i would say start from scratch, flash the global ruu twice, pull the. zip followed by a factory reset. thats what I would do, if I was in your shoes.
Sent from my ADR6425LVW using Tapatalk 2
Or reflash your ROM. If you can do a dirty flash you can just flash over it and I think you won't lose your set up. That should restore any necessary folders/files if that's the issue.
Oh! What about this... Format it in recovery or via your phone in settings. Since there's that option it should put whatever is needed on there.
If you can't tell, I'm just brainstorming here... I don't know what the files and folders are but seems to me formatting it from within the phone should work or why would you be able to do it?
EDIT: I just reread your post where you posted the pic. I guess you probably have more issues than just the ext sd. Probably best to RUU it and get back to stock and start from scratch. Then you know it's all good and clean.
Thanks
LOBBS said:
You always have the option of flashing a RUU and with that putting your phone back to bone stock.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
mike7728 said:
i would say start from scratch, flash the global ruu twice, pull the. zip followed by a factory reset. thats what I would do, if I was in your shoes.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Where can I find the right GLOBAL RUU for my phone?
So I flash the RUU twice one after another. Delete the zip? and Boot and do a factory reset?
I would appreciate any links you can forward me to for the Global RUU!
:victory:Thanks in advanced.
It used to be here:
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
But I just read today that all those mirrors are taken down.
Check the Developer section in the Vigor Shipped RUU thread.
Here's the link from that thread:
http://www.androidfiles.org/ruu/?dir=Vigor
You don't need to factory reset after running the RUU, it puts it all back to factory stock anyway. Relock before you run it:
fastboot oem lock
And after it's done you'll need to unlock again and flash a recovery, root, then flash custom rom.
feralicious said:
Or reflash your ROM. If you can do a dirty flash you can just flash over it and I think you won't lose your set up. That should restore any necessary folders/files if that's the issue.
Oh! What about this... Format it in recovery or via your phone in settings. Since there's that option it should put whatever is needed on there.
If you can't tell, I'm just brainstorming here... I don't know what the files and folders are but seems to me formatting it from within the phone should work or why would you be able to do it?
Click to expand...
Click to collapse
The funny thing is I have a COMPLETE Nandroid Backup of my phone even before I ever flashed my first ROM! (Before this even happened)
I went into Amon Ra and did a CLEAN WIPE. I wiped everything in the internal storage it was completely blank (I check it under My Computer)
I then restored my Nandroid Backup of my STOCK ICS from Verizon and HTC and Im still getting the same error.
"I found a way to take it off of ROAMING. In system select I switched the CDMA ROAMING MODE from Automatic B (I think it was) to Home.
at the moment its showing FULL SIGNAL BARS & then seconds later no Signal Bars with an X over it. The verizon wireless rep told me that I was connecting to their SERVERS."
ChuckZv2 said:
The funny thing is I have a COMPLETE Nandroid Backup of my phone even before I ever flashed my first ROM! (Before this even happened)
I went into Amon Ra and did a CLEAN WIPE. I wiped everything in the internal storage it was completely blank (I check it under My Computer)
I then restored my Nandroid Backup of my STOCK ICS from Verizon and HTC and Im still getting the same error.
"I found a way to take it off of ROAMING. In system select I switched the CDMA ROAMING MODE from Automatic B (I think it was) to Home.
at the moment its showing FULL SIGNAL BARS & then seconds later no Signal Bars with an X over it. The verizon wireless rep told me that I was connecting to their SERVERS."
Click to expand...
Click to collapse
Are you S-On or Off? If S-On, your nandroid may have missed a file that is necessary that can only be replaced by flashing a RUU. Just throwing ideas against the wall.
If I remember correctly, a nandroid from S-On can't touch the kernel and coming from MIUI there may be files that are missing or modified.
In that case, you may be able to pull the stock boot.IMG from the RUU you were on and push that to restore the files.
Sent from my ADR6425LVW using xda premium
LOBBS said:
Are you S-On or Off? If S-On, your nandroid may have missed a file that is necessary that can only be replaced by flashing a RUU. Just throwing ideas against the wall.
If I remember correctly, a nandroid from S-On can't touch the kernel and coming from MIUI there may be files that are missing or modified.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
I am S-On. Its so weird I cant wrap my head around it.
Another funny thing is I've before restored my Nandroid backup when I needed it with a ROM I had that was Unstable and it was working like it should I was back to normal.
Im thinking it has something to do with their towers in my area. But I called a friend that has Verizon as well and he seems to be handling alright.
I just dont get it. Im going to try that RUU flash and see if that works after I eat dinner and possibly relock my phone.
LOBBS said:
Are you S-On or Off? If S-On, your nandroid may have missed a file that is necessary that can only be replaced by flashing a RUU. Just throwing ideas against the wall.
If I remember correctly, a nandroid from S-On can't touch the kernel and coming from MIUI there may be files that are missing or modified.
In that case, you may be able to pull the stock boot.IMG from the RUU you were on and push that to restore the files.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Yes I ADB the Nandroids Boot.img too lol!
ChuckZv2 said:
Yes I ADB the Nandroids Boot.img too lol!
Click to expand...
Click to collapse
Free-flow thinking there. Lol. It's looks like a RUU is going to be your best bet.
Sent from my ADR6425LVW using xda premium
feralicious said:
It used to be here:
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
But I just read today that all those mirrors are taken down.
Check the Developer section in the Vigor Shipped RUU thread.
Here's the link from that thread:
http://www.androidfiles.org/ruu/?dir=Vigor
You don't need to factory reset after running the RUU, it puts it all back to factory stock anyway. Relock before you run it:
fastboot oem lock
And after it's done you'll need to unlock again and flash a recovery, root, then flash custom rom.
Click to expand...
Click to collapse
The android police website did have the RUU files but they are .zip only to flash in recovery they where PH98IMG.zip files.
So im not sure what to do.
hey
Im trying to run the RUU .exe files but the arent executing. I double click the .exe files but nothing happens. I locked my phone so now I dont have access to the bootloader =( I feel like throwing this thing in a river:crying: at this point.
ChuckZv2 said:
Im trying to run the RUU .exe files but the arent executing. I double click the .exe files but nothing happens. I locked my phone so now I dont have access to the bootloader =( I feel like throwing this thing in a river:crying: at this point.
Click to expand...
Click to collapse
Quoted the wrong post this is for the zip files.
You should only have to shorten the name to PH98IMG. All the RUUs I've seen are some longer name (usually the name of the site hosting them_PH98IMG.)
Then just place it on the root of your external SD and boot into Hboot.
Sent from my ADR6425LVW using xda premium
Are you still working on this?
You should be able to RUU from a zip file. Just make sure it's named PH98IMG.zip, put it on your card and then boot into hboot. It should find that file and run it. Let it run through a few times, do its thing and it should reboot when it's done.
I came back here cuz I just ran across this post from another thread:
GordoGuapo said:
<snip>
Could it be because I don't have an SDcard? My phone doesn't read SDcards anymore, so I'm using only the internal storage.
Thanks again!
Click to expand...
Click to collapse
So that guy is using his phone normally without the external card. What happens if you boot up with the external card out of the phone?
I think it has something to do with the hardware on my phone that started not functioning. I did try going into recovery wiping the whole phone wiping my sd card and then placing the zip file in my sd card. I then booted into H boot and from ADB locked my phone rebooted and then it started to read the zip file and reinstalled to factory reset. I let it reinstall the files let it do its thing it restarted a couple of times reinstalled everything needed went back into the lock screen and was still having the same issue till now. But it's okay because I called Verizon Wireless spoke with him on the phone and I still have my extended warranty on the phone and they concluded that it was a hardware issue so I got to replace my phone for free lol
***
Although the problem wasnt solved I still appreciate everyone's help on the matter.
Sent from my ADR6425LVW using xda app-developers app
Go to phone dialer and put *#*#3646#*#* then go to phone information. Look for a drop down menu and make sure its on CDMA/LTE Only (or anything really with CDMA and LTE in it, that specific one may not show up on your list depending on what ruu your on.) That changes the specifics of how the radio operates incoming connections. Set your data settings back to HOME and turn off roaming. Lemme know if that works.
Sent from my Rezound using Tapatalk 2
Well let me explain my predicament. The other day I flash somex's something explosive rom after a wipe of the everything I need to wipe ( Data,Cache,Davlik) When it was finished flashing I got to rebooting. I ended up with a blank, yet illuminated screen ( if that makes sense) I waited about 20 minutes. After coming to the conclusion that the ROM doesn't work I did another wupe of everything needed. Then i flashed JoseGalre's ROM since it has aroma it told me that it had an error and coundln't finsih the instalation. I wiped again and reflashed, same error. I wanted to see what would happen if it let it boot up w/o recovery and it ended up in a boot loop. I tried to go back to 4ext and it seemed to load up just fine but half way through the startup it ends up back in the bootloop. I ran Hasoon's all in one kit and flashed TWRP and it worked just fine until I flash a rom. It seemed to be working just fine then it suddenly crashes and we're back in the loop. I've been trying to fix for the last few days but to no avail. I marked the title as urgent because my parents are going out of town for the weekend and I really need a phone. They havn't a clue that it doesn't work becausse they get home before me. Any help would be appreciated a great deal.
I've had something similar happen and freaked out my phone was down for half a day.
Try booting into the boot loader by holding vol down and power boot into recovery, wipe everything then format everything except SD card and try restoring a backup. Hopefully you made one or two in the past.
Sent from my HTC Amaze 4G running Evervolv jellybean 4.3
Illstatic said:
Well let me explain my predicament. The other day I flash somex's something explosive rom after a wipe of the everything I need to wipe ( Data,Cache,Davlik) When it was finished flashing I got to rebooting. I ended up with a blank, yet illuminated screen ( if that makes sense) I waited about 20 minutes. After coming to the conclusion that the ROM doesn't work I did another wupe of everything needed. Then i flashed JoseGalre's ROM since it has aroma it told me that it had an error and coundln't finsih the instalation. I wiped again and reflashed, same error. I wanted to see what would happen if it let it boot up w/o recovery and it ended up in a boot loop. I tried to go back to 4ext and it seemed to load up just fine but half way through the startup it ends up back in the bootloop. I ran Hasoon's all in one kit and flashed TWRP and it worked just fine until I flash a rom. It seemed to be working just fine then it suddenly crashes and we're back in the loop. I've been trying to fix for the last few days but to no avail. I marked the title as urgent because my parents are going out of town for the weekend and I really need a phone. They havn't a clue that it doesn't work becausse they get home before me. Any help would be appreciated a great deal.
Click to expand...
Click to collapse
I don't think you wiped properly. You needed to format ALL PARTITIONS. I can't stress that enough lol.
Edit: Go into bootloader first. Hold volume down then hold power as well. Choose recovery and format all partitions. If that works you're good! :thumbup:
Use the toolkit and flash 4ext. And make sure whenever you flash Roms that you format all partitions.
If that doesn't work you need to flash a RUU, get it back to stock, it will still retain S OF. Then flash 4ext again. Your problems should be fixed for sure if my first method doesn't work.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Hey guys it completly out of the question to format my internal storage so keep that in mind
GB or IC RUU and which one?
You don't have to format internal storage just data, cache, system, and boot
Sent from my HTC Amaze 4G running CyanogenMod 10.1
Illstatic said:
Hey guys it completly out of the question to format my internal storage so keep that in mind
GB or IC RUU and which one?
Click to expand...
Click to collapse
Just choose format all partitions.
If you want to use a ruu use the T-Mobile ICS RUU.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
So i changed the name of the RUU i download to PH85img.zip and use the all in one tool kit to flash it. The black htc loading screen came up. I waited until it finished and then the bootloader came up with a list of things it head to unzip and then load. After all of that was finished it gave me an error. After reading a message that you should get an error ( i now realize this was at another stage) so i though nothing of it and rebooted. A black screen with 4 warning triangles came up. I let it load all day and when i got home i plugged it back in and I noticed it looked like it was unplugging after securing the charger in I came the conclusion that it wasn't holding a charge and dying on the battery. Normally I would leave it alone but when you plug in the charger it turns itself on. I've began living with the fact that my phone is bricked. But any help would be appreciated.
BTW is there a way to get data (music pictures contacts) that were saved on the internal storage?
Probably should have gone with full caps on the PH85IMG.zip
It's easier just to put the zip on your external sdcard and gone in to bootloader.
Sent from my HTC_Amaze_4G using xda app-developers app
chevycowboyusa said:
Probably should have gone with full caps on the PH85IMG.zip
It's easier just to put the zip on your external sdcard and gone in to bootloader.
Sent from my HTC_Amaze_4G using xda app-developers app
Click to expand...
Click to collapse
So is there anything that I can do when I plug it in it wont boot or charge at all so am i truly bricked or is there still hope
Illstatic said:
So is there anything that I can do when I plug it in it wont boot or charge at all so am i truly bricked or is there still hope
Click to expand...
Click to collapse
Should be hope, check out the unbricking project...
http://forum.xda-developers.com/showthread.php?t=1627882:cowboy: