Related
I was running Das BAMF 3.0 and then switched to anothe rom. I restored das BAMF and now I keep getting the message Sorry! Process system is not rssponding. I cant get past this screen.
If I reboot into recovery the I get an update message it wants to update:
[1] MDM9K
[2] Radio_V2
If I say yes to update then after the update I reboot and back to "Sorry Process...
If I say no then it reboots and same thing!
Help!
Wipe and reflash. It's what I had to do when mine did the same thing.
Sent from my ADR6400L using XDA Premium App
How?
Thanks for the response! How do I wipe... I cant get to any screens.
Donloric1 said:
Thanks for the response! How do I wipe... I cant get to any screens.
Click to expand...
Click to collapse
I had the same question when I started out. I'll make it easy on you.
Go into recovery, use the volume buttons to toggle up and down. Go to wipe data / factory reset. Select it and then confirm it. Then go to wipe cache partition and do the same. Then go to advanced and select wipe davlik. THAT IS HOW TO WIPE. This is recommended to do before flashing a new ROM.
Can't get past the update
I cant get past the update in recovery
Donloric1 said:
I cant get past the update in recovery
Click to expand...
Click to collapse
That's easy to get past. Just load a PGIMG05.zip file onto the ROOT of your SD card. ROOT means without being in any folders. If you're on BAMF 3.0 then you're on Gingerbread. So find the RUU file for unsigned Gingerbread RUU and place it on the ROOT. Then do an Hboot. Which is Power down and volume up at the same time when the phone is off. Make sure you don't have any PGIMG05 files on the ROOT. You probably do because you rooted your phone. If you don't you could end up with S back on.
**You did flash the correct Gingerbread radio...right?
**I have no clue where the Gingerbread RUU is. If you find it, please post it. It will be a fairly large file. Probably around 300mb+
EDIT:
I'm sorry but the RUU for Gingerbread isn't out yet. Try Hbooting the MR1 then Hboot the MR2 Radio RUU which is 2.3.4 base.
Link to Jcase radio thread: http://forum.xda-developers.com/showthread.php?t=997724&highlight=RUU
I'm pretty sure, you'll need to flash the "PG05IMG_Mecha_VERIZON_WWE_1.13.605.7_Radio_1.16.00.0402w_NV_8k_1.41_9k_1.64_release_182727_signed.zip" on that page which should be the last link.
Take your SD Card out, put in a reader or another Android phone and delete the radio file from it.
Sent from my ADR6400L using XDA App
I've had this problem too and I've wiped and reflashed from scratch to fix it.
But this happens to all my backups, making nandroid backups virtually useless to me now. Anybody know why this happens? I've never had a problem like this before and it started after trying to restore from the new CM7 back to bamf 2.1....
A common solution would be to backup the SD Card and reformat it in Clockwork or with SDFormatter.. NOT IN WINDOWS.
When the house gets dirty, you have to clean it.
Sent from my ADR6400L using XDA App
I have tried to format/system and every other piece of advice i can find I still cant get any nandroids to restore... Any ideas?
I have search every possible thread regarding restoring a nandroid and have tried every possible fix... my only solution, which DID WORK, was to format/system, do a full wipe of all three, and then flash the original zip, I cant use any nandroids at all!!! if any one know why please tell me how to restore a nandroid for future use. thanks
format did not work for me either.
restores worked for me at when i came off of Synergy's ROM back to bamf3.0, but coming outta CM7 to bamf 3.0 busted it again...very strange.
str1der_D said:
format did not work for me either.
restores worked for me at when i came off of Synergy's ROM back to bamf3.0, but coming outta CM7 to bamf 3.0 busted it again...very strange.
Click to expand...
Click to collapse
I am using th3orys inj3ct rom and just wanted to see what Synergy was all about, when I wasn't impressed i tried to restore my nandroid (which i made right before i flashed synergy) and that is when all the trouble started... i tried everything that I know of and just had to reflash the original ROM and start from scratch, sux but at least my phone is back on.
I had this issue over the weekend. However I did do a restore prior to getting the error... I was texting my gf, and all of a sudden my screen wouldn't turn on... Pulled the battery and when i booted up I kept getting the error.
I had a PG05IMG.zip on my SD card so if I tried to boot to recovery from boot menu it wouldn't let me.
I took my SD card and plugged it into a PC using an adapter. Deleted the PG05IMG.zip and then booted to recovery. Restored my latest backup (3 days old) and everything worked.
Sent from my ADR6400L using XDA App
What the hell.. this same thing happened to me last night - never had this happen before.
Happened after restoring a backup of Das Bamf 3.0 RC 3
Guess I have to wait for my wife to come home with her old droid so I can plug my sdcard in to her phone and get rid of the pgimg zip
it wont load past the HTC screen..
flashed WARM-3.5-evo3d-unofficial-r100.zip
from sdcard.
had down a factory wipe initially.. tried clearing dalvik cache again but still cannot get past htc screen. ugh
correction i flashed to r119.zip
Did you wipe system as well? How long are you giving it at the HTC Splash screen before you decide it's frozen? I haven't been keeping up to date with the Warm train lately, so I'm not sure if there have been any issues with the builds. I know back in the day, sometimes the build bot that myn used would bork a build from time to time and it wouldn't flash. Have you tried flashing any other builds, or just r119?
yes i did a complete wipe initially.. flashed.. got stuck at screen.. i left it there for 2-3 mins with no response.. just hovering at the HTC screen. I have not tried flashing any other roms as I wasnt sure what if any adverse affect this may have on the current problem
tre976 said:
yes i did a complete wipe initially.. flashed.. got stuck at screen.. i left it there for 2-3 mins with no response.. just hovering at the HTC screen. I have not tried flashing any other roms as I wasnt sure what if any adverse affect this may have on the current problem
Click to expand...
Click to collapse
Before you go any further in trying to figure it out, I would let it sit at the HTC screen a bit longer than a couple minutes. I've had it hang there for 5 or 6 minutes on certain sense roms that I flash, especially on the first boot. Give it a solid 7 minutes or so, and if it's still hanging there..then yea it's stuck. After that, I would simply try flashing something else and see if it works. Perhaps you got a bad download as well, maybe try re downloading it.
suggestions on how to move rom to sdcard if phone isnt booting hence PC isnt seeing the drive?
is it possible to go back to stock rom if this doesnt work?
tre976 said:
suggestions on how to move rom to sdcard if phone isnt booting hence PC isnt seeing the drive?
is it possible to go back to stock rom if this doesnt work?
Click to expand...
Click to collapse
Transfer it to the SD card from recovery. I'm not sure what recovery you're on, but every recovery has the feature to mount the sd card from within recovery. It's like USB MS Toggle or something to that nature. In TWRP 2, I think it's under the 'mount' tab.
Did you just try turning it on again yet, and seeing if it will eventually get past the HTC Screen? Again, it could take a bit more than 2 or 3 minutes on the first boot.
EDIT: And yea, you should be able to get back to a stock ROM no problem, or at least get back to a functioning phone, lol. Did you make a nandroid of your stock setup right after you rooted, before you tried flashing warm?
no i didnt make a nandroid backup sadly. im letting it sit for 10 mins before i give up on tyhis version
I don't think that ROM will boot as I'm pretty sure it has no boot image in it. Joelz was doing some stuff on the later builds and removed the bootimage.
Go into the thread and look for Vin's post. He is on the front page or on post 2. He has been the one updating the ROM for Joelz. the last version I knew of was around 01/12 or so?
tre976 said:
no i didnt make a nandroid backup sadly. im letting it sit for 10 mins before i give up on tyhis version
Click to expand...
Click to collapse
Again, you said you're hboot 1.4, right? So you S-offed with revolutionary? Cuz if you're 1.5, then we're missing an important step....
Sent from my PG86100 using Tapatalk
Never mind, 01/27/12 was his last update.
Here ya go, flash this one.
http://forum.xda-developers.com/showpost.php?p=21019364&postcount=279
KB112 said:
I don't think that ROM will boot as I'm pretty sure it has no boot image in it. Joelz was doing some stuff on the later builds and removed the bootimage.
Go into the thread and look for Vin's post. He is on the front page or on post 2. He has been the one updating the ROM for Joelz. the last version I knew of was around 01/12 or so?
Click to expand...
Click to collapse
LOL, that would certainly explain his problems. As I said, I haven't been keeping up to date with the warm team
Sent from my PG86100 using Tapatalk
Yeah, I read his post too fast. I didn't realize he was flashing Sense 3.5 version. Vins version is really nice and clean, he's done an excellent job helping JoelZ and keeping the ROM alive.
k2buckley said:
Again, you said you're hboot 1.4, right? So you S-offed with revolutionary? Cuz if you're 1.5, then we're missing an important step....
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
no it was 1.4 from revolutinary.io.. it has the nandroid option i missed that step in the instructions before flashing. Thanks i'll try the link above
k2buckley said:
Transfer it to the SD card from recovery. I'm not sure what recovery you're on, but every recovery has the feature to mount the sd card from within recovery. It's like USB MS Toggle or something to that nature. In TWRP 2, I think it's under the 'mount' tab.
Did you just try turning it on again yet, and seeing if it will eventually get past the HTC Screen? Again, it could take a bit more than 2 or 3 minutes on the first boot.
EDIT: And yea, you should be able to get back to a stock ROM no problem, or at least get back to a functioning phone, lol. Did you make a nandroid of your stock setup right after you rooted, before you tried flashing warm?
Click to expand...
Click to collapse
gives me a Mount system or mount /data..
oh i see it i mounted sdcard.. oddly windows doesnt see the card tho as a drive still
tre976 said:
gives me a Mount system or mount /data..
oh i see it i mounted sdcard.. oddly windows doesnt see the card tho as a drive still
Click to expand...
Click to collapse
What recovery are you using?
It should be Toggle USB or something like that
i used my wifes phone sdcard to bypass the problem. that flash got me to a loading phone boot now. thanks! but i'm apparently not connecting to sprint. lol. go figure..
fwiw im using twrp 1.0.3
Ok, now you may have to call them ask to have your data reset. There is a specific thing to ask for. It's in the threads on how to root the Evo 3D.
Hi all,
So it looks like I've ****ed up my phone a bit. I just started the rooting process earlier this week and I went horribly wrong somewhere. The phone is not bricked, but close to it. Here's where I'm at:
Downloaded a couple of ICS ROMs
Unlocked device using HTC Dev
Flashed recovery using recovery-clockwork-touch-5.8.0.2-shooteru.img
Installed first custom ROM 70_shooter_ice_v_1.0.1_beta_7b225
Shooter ICE ROM worked with wifi and mobile data, but camera didn't work and connecting to a computer resulted in a MTP USB error so I was not able to access SD card from any computer
Booted to recovery and flashed a new ROM LoLic Sense 4.0 v4
Now, SD card doesn't work, wifi doesn't work, mobile data doesn't work; phone is essentially bricked
I do not have any backups of the original ROM and I have been trying to flash using RUUs and PG86IMG.zip but I haven't had any luck
PLEASE HELP! What do I do? How can I recover my phone?
Here is the original device info:
Manufacturer: HTC
Model: EVO 3D X515a
OS Version: Android 2.3.4
Baseband: 10.53.9020.00U_10.13.9020.08_2M
Boot loader: 1.49.0008
Carrier: ROGERS
Tiffiter said:
Hi all,
So it looks like I've ****ed up my phone a bit. I just started the rooting process earlier this week and I went horribly wrong somewhere. The phone is not bricked, but close to it. Here's where I'm at:
Downloaded a couple of ICS ROMs
Unlocked device using HTC Dev
Flashed recovery using recovery-clockwork-touch-5.8.0.2-shooteru.img
Installed first custom ROM 70_shooter_ice_v_1.0.1_beta_7b225
Shooter ICE ROM worked with wifi and mobile data, but camera didn't work and connecting to a computer resulted in a MTP USB error so I was not able to access SD card from any computer
Booted to recovery and flashed a new ROM LoLic Sense 4.0 v4
Now, SD card doesn't work, wifi doesn't work, mobile data doesn't work; phone is essentially bricked
I do not have any backups of the original ROM and I have been trying to flash using RUUs and PG86IMG.zip but I haven't had any luck
PLEASE HELP! What do I do? How can I recover my phone?
Here is the original device info:
Manufacturer:HTC
Model:EVO 3D X515a
OS Version:Android 2.3.4
Baseband: 10.53.9020.00U_10.13.9020.08_2M
Boot loader:1.49.0008
Carrier:ROGERS
Click to expand...
Click to collapse
Have you tried mounting the sdcard to PC from recovery?
The Next Sentence Is TRUE.
The Previous Sentence Is A LIE.
Datguy_n_Disguy said:
Have you tried mounting the sdcard to PC from recovery?
The Next Sentence Is TRUE.
The Previous Sentence Is A LIE.
Click to expand...
Click to collapse
No, but what would I be able to do differently? Currently, I am using an SD card reader to load images/roms onto the SD card to try flashing. I have attempted to flash other ROMs and RUUs, but nothing is restoring the radios or usb function of the phone.
The USB issue you are having is an ICS ROM bug. In order to access your SD from your computer you have to mount through your recovery. I would try to go back to a ROM where your radios worked, such as the first ROM you flashed or to the stock ROM, and try to re-install your radios. BTW are you S-ON or OFF? And are the ROMs you flashed CMDA or GSM? If they were CDMA there's your problem.
Alright, from what I understand your phone will boot but nothing really works?
Try flashing this, it's the Stock rom, but it is rooted.
http://forum.xda-developers.com/showthread.php?t=1318942
All you need to do is flash it and boot into it.
IF it works, create a nandroid of it, and then try flashing a different ROM.
If it doesn't work, just post again.
MAKE SURE to wipe the phone completely from Recovery before the install.
Format all sections, and then install. (You don't need to format SD card)
And, by the way, if you need a good rom, try the KingCobra ICS ROM.
If you're S-ON, however, you'll need to use Version 1.5. S-OFF: 1.6+.
DjDom said:
Alright, from what I understand your phone will boot but nothing really works?
Try flashing this, it's the Stock rom, but it is rooted.
http://forum.xda-developers.com/showthread.php?t=1318942
All you need to do is flash it and boot into it.
IF it works, create a nandroid of it, and then try flashing a different ROM.
If it doesn't work, just post again.
MAKE SURE to wipe the phone completely from Recovery before the install.
Format all sections, and then install. (You don't need to format SD card)
And, by the way, if you need a good rom, try the KingCobra ICS ROM.
If you're S-ON, however, you'll need to use Version 1.5. S-OFF: 1.6+.
Click to expand...
Click to collapse
Yes, it boots up fine, but nothing works.
The stock ROM you linked is from Europe and I am from Canada on Rogers. Will it still work? I will give it a try later tonight.
And yea, I'm S-ON.
sic_inside said:
The USB issue you are having is an ICS ROM bug. In order to access your SD from your computer you have to mount through your recovery. I would try to go back to a ROM where your radios worked, such as the first ROM you flashed or to the stock ROM, and try to re-install your radios. BTW are you S-ON or OFF? And are the ROMs you flashed CMDA or GSM? If they were CDMA there's your problem.
Click to expand...
Click to collapse
I got all the ROMs from the GSM development index. And I am S-ON
Tiffiter said:
Yes, it boots up fine, but nothing works.
The stock ROM you linked is from Europe and I am from Canada on Rogers. Will it still work? I will give it a try later tonight.
And yea, I'm S-ON.
Click to expand...
Click to collapse
Yes, it will work perfectly.
I'm on Rogers too.
I have the exact same phone as you, right down to the HBOOT. So, not to worry as I've used that ROM several times to fix problems.
I know you've probably heard this a dozen times, but I recommend you go S-OFF. It's not very hard and I can help you out if you'd like.
DjDom said:
Yes, it will work perfectly.
I'm on Rogers too.
I have the exact same phone as you, right down to the HBOOT. So, not to worry as I've used that ROM several times to fix problems.
I know you've probably heard this a dozen times, but I recommend you go S-OFF. It's not very hard and I can help you out if you'd like.
Click to expand...
Click to collapse
That would be awesome. I appreciate all the help!
Tiffiter said:
That would be awesome. I appreciate all the help!
Click to expand...
Click to collapse
No Problem!
Tell me how installing the Euro ROM goes.
DjDom said:
No Problem!
Tell me how installing the Euro ROM goes.
Click to expand...
Click to collapse
Okay so here's what I did:
1. Turn OFF Fast Boot by going to Settings > Power
2. Turn ON USB Debugging by going to Settings > Applications > Development
3. Connect to your computer using USB Disk Mode
4. Turned off the phone and took out the battery for 10 seconds
5. Re-inserted the battery and booted into recovery
8. Wipe the Cache Partition
9. Wipe the Dalvik Cache
10. Wipe Data/Factory Reset
11. Installed the ROM from the zip file on my sd card
Now when I boot up, it flashes the HTC logo and then the screen just goes black. The home buttons are lit up.
Tiffiter said:
Okay so here's what I did:
1. Turn OFF Fast Boot by going to Settings > Power
2. Turn ON USB Debugging by going to Settings > Applications > Development
3. Connect to your computer using USB Disk Mode
4. Turned off the phone and took out the battery for 10 seconds
5. Re-inserted the battery and booted into recovery
8. Wipe the Cache Partition
9. Wipe the Dalvik Cache
10. Wipe Data/Factory Reset
11. Installed the ROM from the zip file on my sd card
Now when I boot up, it flashes the HTC logo and then the screen just goes black. The home buttons are lit up.
Click to expand...
Click to collapse
What recovery are you using?
DjDom said:
What recovery are you using?
Click to expand...
Click to collapse
recovery-clockwork-touch-5.8.0.2-shooteru
Tiffiter said:
recovery-clockwork-touch-5.8.0.2-shooteru
Click to expand...
Click to collapse
Problem Solved by flashing a new recovery, installing a rom, then flashing the Boot.img.
I could really use some help here guys. Last night I flashed a new ROM - ThunderShed-v1.6_CM7.2-tbolt using Rom Manager/ClockworkMod (had been using CM7.1 without issue). I also updated the kernal to imoseyon_leanKernel_v6.2.1AOSP (didn't change ANY kernal settings) after reboot and install gapps. Everything seemed fine, however after powering off and back on again. I am now stuck in a boot loop. HTC screen phone vibrates, black screen, then HTC screen. I then attempted to boot into HBoot screen which I was able to do. Clicked on recovery and attempted to get into clockwork mod and restore the backup I'd created. Phone just reboots don't get to recovery and continuous HTC Screen black HTC Screen. This isn't my first rodeo with flashing roms (no expert by any stretch, but I'm pretty familiar with the process). Somehow I've screwed something up badly. I did attempt factory reset. I've also tried to downgrade to an older RUU although the RUU is loaded in HBOOT and seems to install (other than Bootloader is bypassed, due I believe because of Revolutionary ERROR - Can not roll back hboot version). Everything else Boot, recovery, system, splash1, userdata, etc all appear to update and show oK. After rebooting I'm back in the boot loop. I've tried installing stock roms rooted and unrooted without resolving the problem. ADB doesn't help either just never returns the device serial number. Loopfix just sits there waiting for device.
I'm am S-OFF (via Revolutionary)
-Revolutionary-
MECHA XD SHIP S-OFF
HBOOT-6.04.1002
MICROP-/
RADIO-1.16.00.0402w_1
eMMC-boot
Feb 23 2011,20:42:55
There is no PG05IMG.zip file on my SD card. (apparently can cause boot looping)
I googled to my hearts content, browsed every forum and blog I could to find a solution. Found similar issues but was not able to use any of the know fixes out there. Part of the problem is ADB doesn't see my phone. I've looked at 'loop fix' and 'thunderbolt all in one tool' these don't work for me. Any suggestions would be welcome. I'd prefer not to have to throw money at the problem to fix it.
I know I screwed the pooch on this one, maybe someone has the skills to help me unscrew it.
Thanks much in advance!
Rem
What happens when you connect the phone via USB? Does the computer detect it? You could try flashing cwm through hboot
sent from my jellybolt courtesy of the jester
dizzyman1180 said:
What happens when you connect the phone via USB? Does the computer detect it? You could try flashing cwm through hboot as PG05IMG. See if that works and you can get into recovery.
sent from my jellybolt courtesy of the jester
Click to expand...
Click to collapse
sent from my jellybolt courtesy of the jester
dizzyman1180 said:
What happens when you connect the phone via USB? Does the computer detect it? You could try flashing cwm through hboot
sent from my jellybolt courtesy of the jester
Click to expand...
Click to collapse
Windows 7 does signal that it sees a USB device but it shows unknown device. I've tried the HTC Drivers and the android USB drivers from google. Nothing doing. I am currently trying to install CWM via hboot (PG05IMG.zip). Got into CWM once tried to restore back to my backup but after the restore process same thing.
Thank you for your suggestions!
Rem
No problem. Report back with your progress.
sent from my jellybolt courtesy of the jester
dizzyman1180 said:
No problem. Report back with your progress.
sent from my jellybolt courtesy of the jester
Click to expand...
Click to collapse
UPDATE: Unable to get CWR through HBOOT.
Rem
I have the same problem.
I have a brand new(refurbished) thunderbolt. I recently installed
*07-25-2012* JELLYBLUR *V1.3* CM7.2 - SPJESTER Production
I completely wiped and cleared the device. All was running fine, until I unplugged it from the charger then poof, boot loop. I can also access hboot but nothing seems to work. I have flashed a few roms, but I'm out of my depth here.
I will try putting and image on the sd card, since it does try to flash a radio when it boots.
Either of you tried an RUU. Download 605.9 or 605.19, change it PG05IMG.zip and flash it through hboot, see if it goes through.
Sent from my ADR6400L using xda premium
I have successfully flashed both recovery, and the latest mr4 radio from hboot.
Without the sd card, I was able to get it booted once after each flash. Unplugging it forced it right back into boot loop(whether card was in or not).
The only options that work are hboot, and fast boot. Neither connects to adb, or the all in one tool.
Can I flash a regular rom from hboot? I have previous version of thundershed, and various stock roms on the SD card?
dizzyman1180 said:
Either of you tried an RUU. Download 605.9 or 605.19, change it PG05IMG.zip and flash it through hboot, see if it goes through.
Sent from my ADR6400L using xda premium
Click to expand...
Click to collapse
I've tried RUU both .9 and .19 both seem to flash fine. But after reboot same boot loop. After trying a few more times flashing various RUU I flashed .19 again. After rebooting the phone I was able to get into the phone, everything setup fine, google account, wireless, etc. But after rebooting again. Back in same boot loop. I've also tried using 2 different SD card to rule out a bad SD. Unfortunately same thing. Starting to think this is hardware not a bad rom or firmware.
Rem
Ok I tried a factory wipe, no go either....
Tried installing regular rom renamed as "pg....." that didn't work.
So I've been told as long as you have hboot you can fix anything...Not sure whats next? At this point I'd be happy to start over.
Okay, I'm gonna try and see if I can get a dev to check out this thread for you guys. Because I am not sure what to tell you to do next at this point. Its exceeded my knowledge.
Sent from my ADR6400L using xda premium
dizzyman1180 said:
Okay, I'm gonna try and see if I can get a dev to check out this thread for you guys. Because I am not sure what to tell you to do next at this point. Its exceeded my knowledge.
Sent from my ADR6400L using xda premium
Click to expand...
Click to collapse
Dizzyman any help is appreciated. Thanks for taking an interest and trying to help!
Rem
ok, I am not exactly sure what happened...I left my phone with no sim, no memory card and no battery alone for about 7 hours.
I came home with the intent to flash twrp from fastboot usb. I plugged it into usb port, put memory card and battery in. The phone on its own turned on, and voila it was in Clockwork.
Note the SIM card was not in the phone. I accidentally left it in the other tbolt I am replacing.
I factory wiped, cleared cache, and then installed thundershed from zip on SD. It has booted twice and seems to be running as it should be.
I put the sim card in and now its boot looping again. Removing the sim it boots and runs fine. The sim works fine on another thunderbolt, so I must assume the sim is fine.
I compared phones both were running the same rom and same radios. Kernels were different so I flashed imoseyon kernel to match the working phone. No go still boot looping.
Assurion sent me a "new" retail sim. Verizon told me to use my old one in the new phone. However the "new" phone will boot loop continuosly with old sim card. I have verified that the rom, radios, etc are all the same.
The mystery deepens...
tonyagee said:
ok, I am not exactly sure what happened...I left my phone with no sim, no memory card and no battery alone for about 7 hours.
I came home with the intent to flash twrp from fastboot usb. I plugged it into usb port, put memory card and battery in. The phone on its own turned on, and voila it was in Clockwork.
Note the SIM card was not in the phone. I accidentally left it in the other tbolt I am replacing.
I factory wiped, cleared cache, and then installed thundershed from zip on SD. It has booted twice and seems to be running as it should be.
I put the sim card in and now its boot looping again. Removing the sim it boots and runs fine. The sim works fine on another thunderbolt, so I must assume the sim is fine.
I compared phones both were running the same rom and same radios. Kernels were different so I flashed imoseyon kernel to match the working phone. No go still boot looping.
Assurion sent me a "new" retail sim. Verizon told me to use my old one in the new phone. However the "new" phone will boot loop continuosly with old sim card. I have verified that the rom, radios, etc are all the same.
The mystery deepens...
Click to expand...
Click to collapse
Attempted the above on my device but no luck. Just same reboot loop. Just FYI. Thanks for the tip.
Rem
Even the different sim, eventually led to the same issue. I finally just convinced assurian that my replacement phone is defective (which is may be).
The only thing I can think of is that the jelly rom, combined with the all in one root tool somehow made a bad situation or the phone is simply defective.
Now my task is to see if I can flash something to make this stock...lol...I really don't want to send back a phone to assurion with clockwork and revolution on it if I can help it.
I suspect its going to be tricky as ADB doesn't work..
Here is where I stand.
1. Flashed a stock room, through hboot
2. Flashed a stock hboot through hboot. (this didn't work, revolution is locked)
3. I rebooted back to hboot.
4. removed sim card, and sd car.
5. Then I selected "Recovery" it went into standard recovery i let it sit for a bit, then it rebooted on its own back to stock, unactivated state.
I used the files from this thread
After this is seems to function perfectly normal, except I still have a revolutionary boot loader, and soff.
I let the phone reboot, and once it loaded I was able to get adb to work perfectly fine. I then returned to the above guide and fixed the boot loader, and s-off as directed. Its now completely stock. I mean it might be a version or so from whats current but a simple ota update would take care of it.
Its all brand new...Of course, I am still going to return it to asurian as I have no idea if it had a hardware issue, or what it was.
tonyagee said:
Here is where I stand.
1. Flashed a stock room, through hboot
2. Flashed a stock hboot through hboot. (this didn't work, revolution is locked)
3. I rebooted back to hboot.
4. removed sim card, and sd car.
5. Then I selected "Recovery" it went into standard recovery i let it sit for a bit, then it rebooted on its own back to stock, unactivated state.
I used the files from this thread
After this is seems to function perfectly normal, except I still have a revolutionary boot loader, and soff.
I let the phone reboot, and once it loaded I was able to get adb to work perfectly fine. I then returned to the above guide and fixed the boot loader, and s-off as directed. Its now completely stock. I mean it might be a version or so from whats current but a simple ota update would take care of it.
Its all brand new...Of course, I am still going to return it to asurian as I have no idea if it had a hardware issue, or what it was.
Click to expand...
Click to collapse
Tonyagee that's for the step by step. Tried on my Tbolt. Still boot looping. I appreciate you documenting what you did THANK YOU!
Your welcome...I definitely was on the edge of my skill set for sure....
So my thunderbolt is is in the same boat. The main cause for the boot looping seems to come from unplugging the usb from charging.
Mine will randomly stop the infinite boot looping and boot up. Sometimes it's quick. Sometimes it will take hours.
Most of the time when I manage to get it to run it is very difficult to get back into a custom recovery. It has to reboot the phone to get into recovery which most of the time just puts it into the infinite boot loop again.
If I plug mine into a computer it will charge but will not recognize the phone.
I've tried every fix known to man. No luck. I've come to deal with it as I've had this problem for two or three months now.
Sent from my ADR6400L using Tapatalk 2
---------- Post added at 08:09 PM ---------- Previous post was at 07:37 PM ----------
tonyagee said:
ok, I am not exactly sure what happened...I left my phone with no sim, no memory card and no battery alone for about 7 hours.
I came home with the intent to flash twrp from fastboot usb. I plugged it into usb port, put memory card and battery in. The phone on its own turned on, and voila it was in Clockwork.
The mystery deepens...
Click to expand...
Click to collapse
Mine has done the same thing. I read that one of the failsafe ways to boot up clock work mod recovery is that it will automatically boot up after a battery pull and turn the phone back on with it plugged in.
If I plug the phone in while it is completely shut down it automatically powers it on and 9 times out of 10 it randomly reboots but sometimes it will boot up into recovery.
Sent from my ADR6400L using Tapatalk 2
Well let me explain my predicament. The other day I flash somex's something explosive rom after a wipe of the everything I need to wipe ( Data,Cache,Davlik) When it was finished flashing I got to rebooting. I ended up with a blank, yet illuminated screen ( if that makes sense) I waited about 20 minutes. After coming to the conclusion that the ROM doesn't work I did another wupe of everything needed. Then i flashed JoseGalre's ROM since it has aroma it told me that it had an error and coundln't finsih the instalation. I wiped again and reflashed, same error. I wanted to see what would happen if it let it boot up w/o recovery and it ended up in a boot loop. I tried to go back to 4ext and it seemed to load up just fine but half way through the startup it ends up back in the bootloop. I ran Hasoon's all in one kit and flashed TWRP and it worked just fine until I flash a rom. It seemed to be working just fine then it suddenly crashes and we're back in the loop. I've been trying to fix for the last few days but to no avail. I marked the title as urgent because my parents are going out of town for the weekend and I really need a phone. They havn't a clue that it doesn't work becausse they get home before me. Any help would be appreciated a great deal.
I've had something similar happen and freaked out my phone was down for half a day.
Try booting into the boot loader by holding vol down and power boot into recovery, wipe everything then format everything except SD card and try restoring a backup. Hopefully you made one or two in the past.
Sent from my HTC Amaze 4G running Evervolv jellybean 4.3
Illstatic said:
Well let me explain my predicament. The other day I flash somex's something explosive rom after a wipe of the everything I need to wipe ( Data,Cache,Davlik) When it was finished flashing I got to rebooting. I ended up with a blank, yet illuminated screen ( if that makes sense) I waited about 20 minutes. After coming to the conclusion that the ROM doesn't work I did another wupe of everything needed. Then i flashed JoseGalre's ROM since it has aroma it told me that it had an error and coundln't finsih the instalation. I wiped again and reflashed, same error. I wanted to see what would happen if it let it boot up w/o recovery and it ended up in a boot loop. I tried to go back to 4ext and it seemed to load up just fine but half way through the startup it ends up back in the bootloop. I ran Hasoon's all in one kit and flashed TWRP and it worked just fine until I flash a rom. It seemed to be working just fine then it suddenly crashes and we're back in the loop. I've been trying to fix for the last few days but to no avail. I marked the title as urgent because my parents are going out of town for the weekend and I really need a phone. They havn't a clue that it doesn't work becausse they get home before me. Any help would be appreciated a great deal.
Click to expand...
Click to collapse
I don't think you wiped properly. You needed to format ALL PARTITIONS. I can't stress that enough lol.
Edit: Go into bootloader first. Hold volume down then hold power as well. Choose recovery and format all partitions. If that works you're good! :thumbup:
Use the toolkit and flash 4ext. And make sure whenever you flash Roms that you format all partitions.
If that doesn't work you need to flash a RUU, get it back to stock, it will still retain S OF. Then flash 4ext again. Your problems should be fixed for sure if my first method doesn't work.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Hey guys it completly out of the question to format my internal storage so keep that in mind
GB or IC RUU and which one?
You don't have to format internal storage just data, cache, system, and boot
Sent from my HTC Amaze 4G running CyanogenMod 10.1
Illstatic said:
Hey guys it completly out of the question to format my internal storage so keep that in mind
GB or IC RUU and which one?
Click to expand...
Click to collapse
Just choose format all partitions.
If you want to use a ruu use the T-Mobile ICS RUU.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
So i changed the name of the RUU i download to PH85img.zip and use the all in one tool kit to flash it. The black htc loading screen came up. I waited until it finished and then the bootloader came up with a list of things it head to unzip and then load. After all of that was finished it gave me an error. After reading a message that you should get an error ( i now realize this was at another stage) so i though nothing of it and rebooted. A black screen with 4 warning triangles came up. I let it load all day and when i got home i plugged it back in and I noticed it looked like it was unplugging after securing the charger in I came the conclusion that it wasn't holding a charge and dying on the battery. Normally I would leave it alone but when you plug in the charger it turns itself on. I've began living with the fact that my phone is bricked. But any help would be appreciated.
BTW is there a way to get data (music pictures contacts) that were saved on the internal storage?
Probably should have gone with full caps on the PH85IMG.zip
It's easier just to put the zip on your external sdcard and gone in to bootloader.
Sent from my HTC_Amaze_4G using xda app-developers app
chevycowboyusa said:
Probably should have gone with full caps on the PH85IMG.zip
It's easier just to put the zip on your external sdcard and gone in to bootloader.
Sent from my HTC_Amaze_4G using xda app-developers app
Click to expand...
Click to collapse
So is there anything that I can do when I plug it in it wont boot or charge at all so am i truly bricked or is there still hope
Illstatic said:
So is there anything that I can do when I plug it in it wont boot or charge at all so am i truly bricked or is there still hope
Click to expand...
Click to collapse
Should be hope, check out the unbricking project...
http://forum.xda-developers.com/showthread.php?t=1627882:cowboy: