it wont load past the HTC screen..
flashed WARM-3.5-evo3d-unofficial-r100.zip
from sdcard.
had down a factory wipe initially.. tried clearing dalvik cache again but still cannot get past htc screen. ugh
correction i flashed to r119.zip
Did you wipe system as well? How long are you giving it at the HTC Splash screen before you decide it's frozen? I haven't been keeping up to date with the Warm train lately, so I'm not sure if there have been any issues with the builds. I know back in the day, sometimes the build bot that myn used would bork a build from time to time and it wouldn't flash. Have you tried flashing any other builds, or just r119?
yes i did a complete wipe initially.. flashed.. got stuck at screen.. i left it there for 2-3 mins with no response.. just hovering at the HTC screen. I have not tried flashing any other roms as I wasnt sure what if any adverse affect this may have on the current problem
tre976 said:
yes i did a complete wipe initially.. flashed.. got stuck at screen.. i left it there for 2-3 mins with no response.. just hovering at the HTC screen. I have not tried flashing any other roms as I wasnt sure what if any adverse affect this may have on the current problem
Click to expand...
Click to collapse
Before you go any further in trying to figure it out, I would let it sit at the HTC screen a bit longer than a couple minutes. I've had it hang there for 5 or 6 minutes on certain sense roms that I flash, especially on the first boot. Give it a solid 7 minutes or so, and if it's still hanging there..then yea it's stuck. After that, I would simply try flashing something else and see if it works. Perhaps you got a bad download as well, maybe try re downloading it.
suggestions on how to move rom to sdcard if phone isnt booting hence PC isnt seeing the drive?
is it possible to go back to stock rom if this doesnt work?
tre976 said:
suggestions on how to move rom to sdcard if phone isnt booting hence PC isnt seeing the drive?
is it possible to go back to stock rom if this doesnt work?
Click to expand...
Click to collapse
Transfer it to the SD card from recovery. I'm not sure what recovery you're on, but every recovery has the feature to mount the sd card from within recovery. It's like USB MS Toggle or something to that nature. In TWRP 2, I think it's under the 'mount' tab.
Did you just try turning it on again yet, and seeing if it will eventually get past the HTC Screen? Again, it could take a bit more than 2 or 3 minutes on the first boot.
EDIT: And yea, you should be able to get back to a stock ROM no problem, or at least get back to a functioning phone, lol. Did you make a nandroid of your stock setup right after you rooted, before you tried flashing warm?
no i didnt make a nandroid backup sadly. im letting it sit for 10 mins before i give up on tyhis version
I don't think that ROM will boot as I'm pretty sure it has no boot image in it. Joelz was doing some stuff on the later builds and removed the bootimage.
Go into the thread and look for Vin's post. He is on the front page or on post 2. He has been the one updating the ROM for Joelz. the last version I knew of was around 01/12 or so?
tre976 said:
no i didnt make a nandroid backup sadly. im letting it sit for 10 mins before i give up on tyhis version
Click to expand...
Click to collapse
Again, you said you're hboot 1.4, right? So you S-offed with revolutionary? Cuz if you're 1.5, then we're missing an important step....
Sent from my PG86100 using Tapatalk
Never mind, 01/27/12 was his last update.
Here ya go, flash this one.
http://forum.xda-developers.com/showpost.php?p=21019364&postcount=279
KB112 said:
I don't think that ROM will boot as I'm pretty sure it has no boot image in it. Joelz was doing some stuff on the later builds and removed the bootimage.
Go into the thread and look for Vin's post. He is on the front page or on post 2. He has been the one updating the ROM for Joelz. the last version I knew of was around 01/12 or so?
Click to expand...
Click to collapse
LOL, that would certainly explain his problems. As I said, I haven't been keeping up to date with the warm team
Sent from my PG86100 using Tapatalk
Yeah, I read his post too fast. I didn't realize he was flashing Sense 3.5 version. Vins version is really nice and clean, he's done an excellent job helping JoelZ and keeping the ROM alive.
k2buckley said:
Again, you said you're hboot 1.4, right? So you S-offed with revolutionary? Cuz if you're 1.5, then we're missing an important step....
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
no it was 1.4 from revolutinary.io.. it has the nandroid option i missed that step in the instructions before flashing. Thanks i'll try the link above
k2buckley said:
Transfer it to the SD card from recovery. I'm not sure what recovery you're on, but every recovery has the feature to mount the sd card from within recovery. It's like USB MS Toggle or something to that nature. In TWRP 2, I think it's under the 'mount' tab.
Did you just try turning it on again yet, and seeing if it will eventually get past the HTC Screen? Again, it could take a bit more than 2 or 3 minutes on the first boot.
EDIT: And yea, you should be able to get back to a stock ROM no problem, or at least get back to a functioning phone, lol. Did you make a nandroid of your stock setup right after you rooted, before you tried flashing warm?
Click to expand...
Click to collapse
gives me a Mount system or mount /data..
oh i see it i mounted sdcard.. oddly windows doesnt see the card tho as a drive still
tre976 said:
gives me a Mount system or mount /data..
oh i see it i mounted sdcard.. oddly windows doesnt see the card tho as a drive still
Click to expand...
Click to collapse
What recovery are you using?
It should be Toggle USB or something like that
i used my wifes phone sdcard to bypass the problem. that flash got me to a loading phone boot now. thanks! but i'm apparently not connecting to sprint. lol. go figure..
fwiw im using twrp 1.0.3
Ok, now you may have to call them ask to have your data reset. There is a specific thing to ask for. It's in the threads on how to root the Evo 3D.
Related
Ok, I looked around and cannot find an answer that works for me for this issue. I am wondering if it has to do with my phone having S-Off? I am most likely wrong, but i have to know whats going on. No matter what I try, I cannot get My Rezound to go from GB to ICS, ANY ICS BASED ROM for that matter. I checked MD5, Tried with battery door both removed and attached, with or without the SIM card inserted into the phone. The phone boots up almost 100%. I get a message saying "Updating Android" and it says its updating or doing something to 160 apps, the system then reboots, when it gets past the 4G screen again, It says that the boot was completed, I have no signal, i checked on the service type and its correct, tried a factory reset, and still nothing, the system just continues to boot loop over and over again, and when it boots up i cannot get past the Activation screen where it says that the phone is trying to contact Verizon to Auto Activate. I can go back to GB easily, and that works %100. Any and all information would be useful, Only reason why i think this might have to do with S-Off is because my first Rezound was S-On and worked just fine going to ICS, while this new one has S-Off and is just not cutting it.
If you have s-off the rom image could contain a radio update. That could be getting you...also data is off by default in some ICS ROMs.
Sent from my ADR6425LVW using Tapatalk
Sent from my ADR6425LVW using Tapatalk
MrSmith317 said:
If you have s-off the rom image could contain a radio update. That could be getting you...also data is off by default in some ICS ROMs.
Sent from my ADR6425LVW using Tapatalk
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
so what would be recommended in this type of situation? I know its not the data being off thats causing the issue, because when i boot up i dont have a signal at all, and the lock screen instead of showing VZW banner it says No Signal. Would the Radio being an issue also cause boot loop issues?
Did you put the battery cover on the phone ?
Edit saw that u did sorry ...
Sent from my Dinc... I mean Rezound
Only thing i can think of is that the ICS rom you flashed has data off automatically, and requires you to keep pressing the home button until it passes the activation screen.
Also make sure your battery cover is on like yojoe600 said, your antenna is connected to the cover and without it you will have no signal.
who_mike_d said:
Only thing i can think of is that the ICS rom you flashed has data off automatically, and requires you to keep pressing the home button until it passes the activation screen.
Also make sure your battery cover is on like yojoe600 said, your antenna is connected to the cover and without it you will have no signal.
Click to expand...
Click to collapse
this is just sooooooooo irritating. all that i have tried, this is kinda depressing. One interesting thing that i did come across though. When i flashed the BAMF GB, and tried to go from rom to rom to rom, i didnt get any MainVer error.... Dont know if thats just because S-Off allows you to go from one to another freely, or if its just not taking these updates.....
S-off has no mainvar issues. Try putting the gb radio into a PB zip or whatever the resound uses and flash that and boot to see of you get data then
Sent from my ADR6425LVW using XDA App
hey guys, its not just data, the phone is bootlooping on him.
I know several people have s-off devices. You might try looking over on rootzwiki as well. Maybe a dev with s-off can help.
I am one of those people with an s-off and I have had no issues with it but I also updated to the ICS radio AMD have no issues so I'm not totally sure what not working with yours
Sent from my ADR6425LVW using XDA App
werdna87 said:
I am one of those people with an s-off and I have had no issues with it but I also updated to the ICS radio AMD have no issues so I'm not totally sure what not working with yours
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
Not sure what is going on with mine that is making it so different. This is just frustrating, last thing that im going to try is going to be flashing th kernel through adb, know that whould not matter too much, but i'll give it a shot, not like it would hurt at all.
dalvear88 said:
Not sure what is going on with mine that is making it so different. This is just frustrating, last thing that im going to try is going to be flashing th kernel through adb, know that whould not matter too much, but i'll give it a shot, not like it would hurt at all.
Click to expand...
Click to collapse
Ok , so i tried this, and as i thought not much happened, more of the same. No real help at Rootz either sadly. I need to find me an S-Off Dev.... lol
On a side note, how would one go about flashing a different recovery.img on an S-Off device, do i have to adb it, or can i do it on the fly? If so, how?
Last thought...did you try the bootloop fix? ##whatever after booting without the battery covery etc...?? There' s a full thread on it.
MrSmith317 said:
Last thought...did you try the bootloop fix? ##whatever after booting without the battery covery etc...?? There' s a full thread on it.
Click to expand...
Click to collapse
yeah was about to give that a go, but the system seems to shut down before i get to the phone portion. I'm having to use the Emergency Call option to get to the dialer since the phone sits on the Self Activation Page.
Before anyone can help you fully and properly, more information needed!
What ROM are you trying to install?
angryPirate12 said:
Before anyone can help you fully and properly, more information needed!
What ROM are you trying to install?
Click to expand...
Click to collapse
what you mean more info, my original post was pretty clear, dont mean to be snappy or anything, i could try to give more info maybe. I've tried all the "fixes" and so far nothing works. ALL AND ANY ICS BASED ROMS are not staying stable on my phone. They get stuck in what i think is the data bootloop, but i cannot access the dial pad other than through the Emergency dial pad, i input the *#*#4636#*#* and nothing comes up, i try without the battery cover, and without the SIM card as well (Also have tried Various combinations of SIM and Battery Cover removals and inclusions). The device has S-Off, and is Unlocked with DevUnlock, and has Perm Root.
Like I stated in my initial post, the leak may contain a radio update that your phone(and the network) isn't ready for. We wouldn't get that update because our radios are locked and only a signed update from HTC would install it. I'd say back down to GB and wait it out...or post in the thread of the ROM maker and ask them about the radio.
dalvear88 said:
what you mean more info, my original post was pretty clear, dont mean to be snappy or anything, i could try to give more info maybe. I've tried all the "fixes" and so far nothing works. ALL AND ANY ICS BASED ROMS are not staying stable on my phone. They get stuck in what i think is the data bootloop, but i cannot access the dial pad other than through the Emergency dial pad, i input the *#*#4636#*#* and nothing comes up, i try without the battery cover, and without the SIM card as well (Also have tried Various combinations of SIM and Battery Cover removals and inclusions). The device has S-Off, and is Unlocked with DevUnlock, and has Perm Root.
Click to expand...
Click to collapse
When I say more info, I mean don't describe every symptom... tell us specifically what you did. Every ICS ROM is unique, like for example I last installed newtoroot's Senseless 4.0.3 ROM. In order to use it, I had to flash a ICS Kernel, I used the fastboot method. Then I could flash the ROM using AmonRa Recovery, and it would boot and operate effectively.
That's the kind of specifics we need, so we can follow your steps and identify possible error points, if any.
angryPirate12 said:
When I say more info, I mean don't describe every symptom... tell us specifically what you did. Every ICS ROM is unique, like for example I last installed newtoroot's Senseless 4.0.3 ROM. In order to use it, I had to flash a ICS Kernel, I used the fastboot method. Then I could flash the ROM using AmonRa Recovery, and it would boot and operate effectively.
That's the kind of specifics we need, so we can follow your steps and identify possible error points, if any.
Click to expand...
Click to collapse
Definetly more descriptive lol thank you for the breakdown infact. In that case, last one i tried what the ICS Sense Redefined, and I tried to use the fastboot method for the Included Kernel as well, but that didnt work at all, what ICS Kernel did you flash to get it to work? a Pre-Packaged one? When installing, I did a full wipe (Both the Amon Ra Factory Reset option and the SuperWipe that is in the Dev Forum) installed the Rom, went into the Bootloader and did ADB CMD of fastboot flash boot boot.img and thats about it.
dalvear88 said:
Definetly more descriptive lol thank you for the breakdown infact. In that case, last one i tried what the ICS Sense Redefined, and I tried to use the fastboot method for the Included Kernel as well, but that didnt work at all, what ICS Kernel did you flash to get it to work? a Pre-Packaged one? When installing, I did a full wipe (Both the Amon Ra Factory Reset option and the SuperWipe that is in the Dev Forum) installed the Rom, went into the Bootloader and did ADB CMD of fastboot flash boot boot.img and thats about it.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=22203549&postcount=40
That is the one I used. If you're having issues with fastboot flashing the kernel, you may want to throw the PH98IMG.zip onto your external sd-card and boot into HBOOT then hit vol up to install it that way
angryPirate12 said:
http://forum.xda-developers.com/showpost.php?p=22203549&postcount=40
That is the one I used. If you're having issues with fastboot flashing the kernel, you may want to throw the PH98IMG.zip onto your external sd-card and boot into HBOOT then hit vol up to install it that way
Click to expand...
Click to collapse
ok, i'll give this a shot really quick and do through ext. sd. thanks for the link btw, you've been extremely helpful. let ya know how this goes for me.
I was rooted on MeanROM, and from TWRP I cleared the cache and delvic cache and did a factory wipe, then tried to install the cm10 nightly build, but it said failed, so I cleared and wiped again and tried installing the FreshEVO ROM that I had on it before the MeanROM, it never finished installing, just froze after a while. then TWRP restarted then went into the white HTC "quietly brilliant" screen with the red disclaimer and stuck there. When i hold the power down, it just reboots back to this screen. I cant get it into recovery or bootloader or anywhere but this. My computer isn't recognizing the phone, I tried to adb to it from cmd but its not showing up. I don't think i had the latest hboot or whatever on it, it's been probably two months since i first rooted it. any help would be great, please and thank you. I'm heading to work but i'll check this on my breaks and answer any questions i can about what ive done. I was about to trade the phone for an s3 this saturday, but im sure he wont want it like this! THANK YOU.
I'm just gonna say this and don't take it offensively... That is the risk you took rooting your phone.. if you can get into bootloader, try loading a current ruu on there and see If that works.
Sent from my EVO using Tapatalk 2
thlinx said:
I'm just gonna say this and don't take it offensively... That is the risk you took rooting your phone.. if you can get into bootloader, try loading a current ruu on there and see If that works.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
No offense taken, I understood the risks, and I accept the consequences, which is why I'm fairly calm and not freaking out. I'm going to read more into RUU's on my break, as I'm not completely sure how to do that. Does the computer have to recognize my device for that? I would think so. Is there a trick to getting from this white HTC screen back to TWRP other than trying to reboot or pwr+vol down? Everything just keeps going back here. It wont even turn off without the battery draining.. I'll keep reading on my break, any other helpful comments are definitely welcome. Thanks.
Hold down the power button for 10 seconds and the lights on the capacitive buttons will blink. As soon as the screen goes black wait about half a second then hold volume down and power to get into bootloader then go into recovery.
Hope that helps you. That's how I've always gotten back into recovery when I have a bad flash.
Sent from my EVO using xda premium
BrianBaker said:
Hold down the power button for 10 seconds and the lights on the capacitive buttons will blink. As soon as the screen goes black wait about half a second then hold volume down and power to get into bootloader then go into recovery.
Click to expand...
Click to collapse
This is correct and works. Couldn't boot after trying to install Chainfie 3D drivers but got to recovery this way.
Sent from my EVO 4g LTE on my 3g network.
Happened to me. You have to flash the boot image for cm10 if I recall correctly.
Sent from my EVO
themorningsleeve said:
I was rooted on MeanROM, and from TWRP I cleared the cache and delvic cache and did a factory wipe, then tried to install the cm10 nightly build, but it said failed, so I cleared and wiped again and tried installing the FreshEVO ROM that I had on it before the MeanROM, it never finished installing, just froze after a while. then TWRP restarted then went into the white HTC "quietly brilliant" screen with the red disclaimer and stuck there. When i hold the power down, it just reboots back to this screen. I cant get it into recovery or bootloader or anywhere but this. My computer isn't recognizing the phone, I tried to adb to it from cmd but its not showing up. I don't think i had the latest hboot or whatever on it, it's been probably two months since i first rooted it. any help would be great, please and thank you. I'm heading to work but i'll check this on my breaks and answer any questions i can about what ive done. I was about to trade the phone for an s3 this saturday, but im sure he wont want it like this! THANK YOU.
Click to expand...
Click to collapse
did you ever get this going? Sounds like from what i was seeing you got into your BL finally. I would try reinstalling TWRP like the second part of the OP http://forum.xda-developers.com/showthread.php?t=1794867 and then select reboot to recovery from the bootloader ot the button method. If you get back into twrp restore the last working rom setup you had which sounds like meanrom. If it works come back and let us know.
motcher41 said:
did you ever get this going? Sounds like from what i was seeing you got into your BL finally. I would try reinstalling TWRP like the second part of the OP http://forum.xda-developers.com/showthread.php?t=1794867 and then select reboot to recovery from the bootloader ot the button method. If you get back into twrp restore the last working rom setup you had which sounds like meanrom. If it works come back and let us know.
Click to expand...
Click to collapse
Hey guys, on my lunch break, i got it working! I couldn't get it to go into recovery last night for the life of me, but i tried this morning on my way to work and it worked just fine like it should. For some reason none of my roms would install though other than the jewel stock of the latest update with root that i had on here. It worked and I'm good to go. Thanks for the help though! Anyone know why the roms that i installed before are falling Everette i try to install them now? I always wipe and restore first..
themorningsleeve said:
Hey guys, on my lunch break, i got it working! I couldn't get it to go into recovery last night for the life of me, but i tried this morning on my way to work and it worked just fine like it should. For some reason none of my roms would install though other than the jewel stock of the latest update with root that i had on here. It worked and I'm good to go. Thanks for the help though! Anyone know why the roms that i installed before are falling Everette i try to install them now? I always wipe and restore first..
Click to expand...
Click to collapse
I'm willing to bet that you are not S-OFF, and on Hboot 1.15 or higher, and that was the issue when you tried to install CM10. Make sure you read the instructions for flashing CM10, because you have to do something special to flash a kernel when you are S-ON. Now, as far as the old roms not being able to flash, it may be that they were based on the original 1.13 software version with the 1.13 kernel, and it won't let you flash over your current kernel because the version is older. Essentially, if you are S-ON, you can't flash a kernel unless it matches or is a newer version than the one you have. Of course, you can follow one of the many guides on how to flash boot (kernel) with S-ON to get around this.
timtlm said:
I'm willing to bet that you are not S-OFF, and on Hboot 1.15 or higher, and that was the issue when you tried to install CM10. Make sure you read the instructions for flashing CM10, because you have to do something special to flash a kernel when you are S-ON. Now, as far as the old roms not being able to flash, it may be that they were based on the original 1.13 software version with the 1.13 kernel, and it won't let you flash over your current kernel because the version is older. Essentially, if you are S-ON, you can't flash a kernel unless it matches or is a newer version than the one you have. Of course, you can follow one of the many guides on how to flash boot (kernel) with S-ON to get around this.
Click to expand...
Click to collapse
Wow yes this all made perfect sense! I didn't think about my old roms not being compatible, and i also didn't realize i needed s-off for cm10. I have a bad habit of thinking i can just throw a zip on my card and flash it and it will magically work perfectly lol.. This kind of thinking is what gets me into trouble! Where can i read about turning s-off for installing cm10? Are there links on the download page?
themorningsleeve said:
Wow yes this all made perfect sense! I didn't think about my old roms not being compatible, and i also didn't realize i needed s-off for cm10. I have a bad habit of thinking i can just throw a zip on my card and flash it and it will magically work perfectly lol.. This kind of thinking is what gets me into trouble! Where can i read about turning s-off for installing cm10? Are there links on the download page?
Click to expand...
Click to collapse
S-OFF info is here, but because you are having this issue, you probably have HBoot 1.15 or higher, which means you can't achieve S-OFF until a new exploit is found.
http://forum.xda-developers.com/showthread.php?t=1737123
There are methods for flashing kernels here with S-ON here:
http://forum.xda-developers.com/showthread.php?t=1794867
Also, there's the newer twrp dumlock method if you install the latest version ot TWRP (2.2.1). http://teamw.in/project/htcdumlock
timtlm said:
S-OFF info is here, but because you are having this issue, you probably have HBoot 1.15 or higher, which means you can't achieve S-OFF until a new exploit is found.
http://forum.xda-developers.com/showthread.php?t=1737123
There are methods for flashing kernels here with S-ON here:
http://forum.xda-developers.com/showthread.php?t=1794867
Also, there's the newer twrp dumlock method if you install the latest version ot TWRP (2.2.1). http://teamw.in/project/htcdumlock
Click to expand...
Click to collapse
Ok thanks. My main goal is to not screw this phone up before Saturday when i trade it for an S3 so i may not bother, but i will definitely give it a look!
themorningsleeve said:
Wow yes this all made perfect sense! I didn't think about my old roms not being compatible, and i also didn't realize i needed s-off for cm10. I have a bad habit of thinking i can just throw a zip on my card and flash it and it will magically work perfectly lol.. This kind of thinking is what gets me into trouble! Where can i read about turning s-off for installing cm10? Are there links on the download page?
Click to expand...
Click to collapse
You dont have to have s-off though like he said for cm-10 you just need an extra step or two. I dont blame you for trading it in I did the same. Except I am going back to the Gnex.
motcher41 said:
You dont have to have s-off though like he said for cm-10 you just need an extra step or two. I dont blame you for trading it in I did the same. Except I am going back to the Gnex.
Click to expand...
Click to collapse
I had the gnex before this, why did you go back to that out of the other 2?
themorningsleeve said:
I had the gnex before this, why did you go back to that out of the other 2?
Click to expand...
Click to collapse
Well I'm going back cuz of the non htc clustscrew and the openess of the platform. No bs no s on or s off dev unlocks etc...its how a phone should be. Better camera functionality and I know the sammy platform. Imho it may be older but its a far superior device. Could afford any device out there and to me its hands down gnex
Sent from my SPH-M900 using Tapatalk 2
motcher41 said:
Well I'm going back cuz of the non htc clustscrew and the openess of the platform. No bs no s on or s off dev unlocks etc...its how a phone should be. Better camera functionality and I know the sammy platform. Imho it may be older but its a far superior device. Could afford any device out there and to me its hands down gnex
Sent from my SPH-M900 using Tapatalk 2
Click to expand...
Click to collapse
right on. I did enjoy that phone. I LOVE the camera on my EVO LTE though, that's the one thing ill miss about this one. I did just find out that the ass that was supposed to trade me on saturday already traded someone, so i'm stuck with the LTE for a while now, so i might venture into putting cm10 on it, but then again i might wait til a more stable version hits, just depends on how long that may take..
themorningsleeve said:
right on. I did enjoy that phone. I LOVE the camera on my EVO LTE though, that's the one thing ill miss about this one. I did just find out that the ass that was supposed to trade me on saturday already traded someone, so i'm stuck with the LTE for a while now, so i might venture into putting cm10 on it, but then again i might wait til a more stable version hits, just depends on how long that may take..
Click to expand...
Click to collapse
Ruu it back to stock locked and ebay it. Should get enough for nib sealed gnex. I found one for 319.00. Saw a couple s3 on swappa for about 430-440 nib sealed. Saw a bad esn one going for 290ish so yours should be 350ish or more
Sent from my SPH-M900 using Tapatalk 2
CM10 should be going completely open source with the camera very soon. Expect good things.
To the people complaining about HTC and leaving/trading for new phones.... cya.
That isnt helpful here... we dont need an announcement. Just go please.
Rxpert said:
CM10 should be going completely open source with the camera very soon. Expect good things.
To the people complaining about HTC and leaving/trading for new phones.... cya.
That isnt helpful here... we dont need an announcement. Just go please.
Click to expand...
Click to collapse
Me and the op are having a good clean conversation in his thread so.... cya
Sent from my SPH-M900 using Tapatalk 2
motcher41 said:
Me and the op are having a good clean conversation in his thread so.... cya
Sent from my SPH-M900 using Tapatalk 2
Click to expand...
Click to collapse
Take your private conversation to PM?
I have my Evo 3D and I decided I wanted to flash a ROM on it.
Basically I rooted it and went to flash a ROM on it, and ended up deleting the dalvik cache and cache.
The bad part is, I forgot (like a complete idiot) to do a Nandroid backup.
Is there any way to come back from this?
you could just run an RUU and get back to stock.
btw what problem do you have while flashing new roms?
deleting the dalvick cache and cache dousnt matter, it automatically creates it.
If you haven´t backup up your previous rom, then you cant recover it... that´s why it´s called a backup..
So whats the problem?
I think i read it wrong. do you mean you want to restore your previous stock rom + data? if so its not possible to restore the data without a nandroid.
EM|NEM said:
you could just run an RUU and get back to stock.
btw what problem do you have while flashing new roms?
Click to expand...
Click to collapse
That works even though I can only see the bootloader screen / TWRP recovery screen.?
And my problem was that I had an error while trying to flash room. I might have done it wrong.
But I just want my phone to work. I dont need my apps or contacts etc
.
Not sure what the problem is either. If you delete the dalvik turn the phone back on and it automatically recreates it. No problems what so ever.
It sounds like you flashed or tried to flash a ROM without doing a full wipe. However I'm not sure.
Perhaps you could tell us in more detail the problem and what you would like to do and we can help ya..
Sent from my PG86100 using Tapatalk 2
I know that you are trying to help, but all I wanted to know was how to make it back to normal. But seeing as I did it incorrectly, I could really use the help.
I did not do a Nandroid backup.
What I did was try to flash the rom without wiping my phone, like you said.
Then I selected the option of clearing both cache and dalvick cache.
Then tried flashing rom again. Did not work.
I am sorry I cant recall what the error was when doing it, but I will let you know when I try again in a second (if it doesnt work this time.) [ I also found a different tutorial and would like to give it a try.
There isn't a way to get back to the same state your phone was in before wiping it since you did not do a backup. If you are gsm then find the gsm RUU. If CDMA then find the CDMA version. That will get you back to the stock version but it will be as if you just turned it on for the first time ever.
It would be easier to just download a different ROM and put it on your SD card then flash it. Although it won't be stock...
But before doing any of that just boot recovery and do a full wipe. Then reflash the ROM you were trying to install.
I got back to stock with RUU. Then I figured out how to successfully back up and flash my phone with different roms.
Thank you for all your help.
Good luck in your flashing endeavours! Its addicting.
I actually am having an issue. I am trying to flash a rom on my phone and it says im extracting boot.img with a progress bar on the bottom. The progress bar seems to be staying at one point and not moving.
He said something about naming something to PG86IMG and wasnt clear to me what to name PG86IMG.
Any speculations?
Edit: was impatient.
zdirty said:
I actually am having an issue. I am trying to flash a rom on my phone and it says im extracting boot.img with a progress bar on the bottom. The progress bar seems to be staying at one point and not moving.
He said something about naming something to PG86IMG and wasnt clear to me what to name PG86IMG.
Any speculations?
Edit: was impatient.
Click to expand...
Click to collapse
Got it figured out? Phone working?
Sent from my PG86100 using Tapatalk 2
Are you still s-on btw? Since i saw you had problems with boot.img
Try gaining s-off, flash hboot 1.49.0007 and all of your flashing problems will be gone!
klect said:
Are you still s-on btw? Since i saw you had problems with boot.img
Try gaining s-off, flash hboot 1.49.0007 and all of your flashing problems will be gone!
Click to expand...
Click to collapse
Yes I am on s-on. I did not want to do the wire trick.
I didnt either, now having s off, i cant imagine using the evo 3d with s on.
Sent from my Evo 3D GSM using xda app-developers app
klect said:
I didnt either, now having s off, i cant imagine using the evo 3d with s on.
Sent from my Evo 3D GSM using xda app-developers app
Click to expand...
Click to collapse
I tried the wire trick. Couldn't get it to work. Maybe because I used speaker wire which isnt a sold wire but strands. Do you think that makes a difference?
As long as there is a connection all the way through, no. Keep in mind i tried 20 times or so, you have to get the timing right.
Take another look at the demo vid and try again, if you're not sure about the wire, use a paperclip with some tape around it. (tape is important, you don't want your skin to touch the metal)
klect said:
As long as there is a connection all the way through, no. Keep in mind i tried 20 times or so, you have to get the timing right.
Take another look at the demo vid and try again, if you're not sure about the wire, use a paperclip with some tape around it. (tape is important, you don't want your skin to touch the metal)
Click to expand...
Click to collapse
I did the wire trick about a week or two ago and I couldnt time it just right so I just continuously tapped the SD card metal holder dealio with the paperclip about every second and it worked the fourth or fifth try.
Sent from my PG86100 using Tapatalk 2
There were two main roms I wanted to try after I finally S-OFF'd my phone yesterday. Hatka Supreme 1.1.0 and Carbon. Neither of these worked and I'm glad that I backed up my S-OFF rooted stock rom. Hatka Supreme, the guy states its best to use Beast Mode kernal with the rom, which I flashed after I installed the room, and it just randomly reboots at the splash screen/a few seconds after getting into Android, so I restored my stock and everything worked fine. Next, I tried Carbon, and it just sat there at the carbon flash screen for like 20 minutes, so again, I had to restore to stock. Is there something I'm doing wrong? Is there a difference between Original Android Development and Android Development? Should I be looking at the original or what? I'm really lost, I'm going to try another rom, hopefully someone replies to this before it finishes downloading. Thanks for the help.
EDIT: I'd rather just sit and wait to see if someone replies before I waste time downloading another rom...any help would be appreciated.
rejectedjs said:
There were two main roms I wanted to try after I finally S-OFF'd my phone yesterday. Hatka Supreme 1.1.0 and Carbon. Neither of these worked and I'm glad that I backed up my S-OFF rooted stock rom. Hatka Supreme, the guy states its best to use Beast Mode kernal with the rom, which I flashed after I installed the room, and it just randomly reboots at the splash screen/a few seconds after getting into Android, so I restored my stock and everything worked fine. Next, I tried Carbon, and it just sat there at the carbon flash screen for like 20 minutes, so again, I had to restore to stock. Is there something I'm doing wrong? Is there a difference between Original Android Development and Android Development? Should I be looking at the original or what? I'm really lost, I'm going to try another rom, hopefully someone replies to this before it finishes downloading. Thanks for the help.
EDIT: I'd rather just sit and wait to see if someone replies before I waste time downloading another rom...any help would be appreciated.
Click to expand...
Click to collapse
Did you do a full wipe? System, factory reset, dalvik?
Tapatalked from my HTC DNA - Carbon
pio_masaki said:
Did you do a full wipe? System, factory reset, dalvik?
Tapatalked from my HTC DNA - Carbon
Click to expand...
Click to collapse
It's probably your recoverys fault. On my last DNA I had nothing but failures. Once it took at least 30 times to get a Rom installed. Never solved the issue on that phone. I just soffed my new DNA yesterday, installed the newest cwm touch and flashed 4 different roms with no problem. Try re-flashing cwm touch.
pio_masaki said:
Did you do a full wipe? System, factory reset, dalvik?
Tapatalked from my HTC DNA - Carbon
Click to expand...
Click to collapse
Yes, still the same thing, I'm not saying I didn't do that the first time though, that's like the basics of installing a rom.
str8upx said:
It's probably your recoverys fault. On my last DNA I had nothing but failures. Once it took at least 30 times to get a Rom installed. Never solved the issue on that phone. I just soffed my new DNA yesterday, installed the newest cwm touch and flashed 4 different roms with no problem. Try re-flashing cwm touch.
Click to expand...
Click to collapse
Do you think its TWRP's fault? After I found out there was no way to mount USB storage in TWRP I wanted to switch to CWM, but sadly I don't know how.
rejectedjs said:
Yes, still the same thing, I'm not saying I didn't do that the first time though, that's like the basics of installing a rom.
Do you think its TWRP's fault? After I found out there was no way to mount USB storage in TWRP I wanted to switch to CWM, but sadly I don't know how.
Click to expand...
Click to collapse
You could use the goomanager from the play store or use fastbook flash recovery cwm.img
Edit: for the touch version of cwm fastboot is required.
str8upx said:
You could use the goomanager from the play store or use fastbook flash recovery cwm.img
Edit: for the touch version of cwm fastboot is required.
Click to expand...
Click to collapse
I would rather use goomanager, because it seems easier, but the only thing it seems to be able to download is the twrp image. How would I set it to cwm?
I have canvas 2 running on suvi6 Jupiter rom i have some prob with this when i reboot some icon on home screen will disappear, i found that those apps which r installed on ext sd card its icon will disappear from home screen, but apps working in apps list, only icon from home screen disappeared.
Other problem is that while incoming a call i cannot see full picture of caller becoz half screen is black and half picture can be seen.
Please help me
Sent from my Micromax A110 using xda app-developers app
rejectedjs said:
I would rather use goomanager, because it seems easier, but the only thing it seems to be able to download is the twrp image. How would I set it to cwm?
Click to expand...
Click to collapse
Sorry I was mistaken, goomanager installs twrp not cwm.
Fastboot is easy to use, I'm at work so I can't to a step by step til I get home later. You should be able figure it out but if not I will help when I get home.
str8upx said:
Sorry I was mistaken, goomanager installs twrp not cwm.
Fastboot is easy to use, I'm at work so I can't to a step by step til I get home later. You should be able figure it out but if not I will help when I get home.
Click to expand...
Click to collapse
I don't know if you knew this already but I s-offed using moonshine, is that a problem? I installed cwm and tried installing hatka again and it did the same thing, restart like every three seconds into android. I don't know what to do anymore.
kundan.lohar said:
I have canvas 2 running on suvi6 Jupiter rom i have some prob with this when i reboot some icon on home screen will disappear, i found that those apps which r installed on ext sd card its icon will disappear from home screen, but apps working in apps list, only icon from home screen disappeared.
Other problem is that while incoming a call i cannot see full picture of caller becoz half screen is black and half picture can be seen.
Please help me
Sent from my Micromax A110 using xda app-developers app
Click to expand...
Click to collapse
Pretty sure you're in the wrong forum.
From my S-Off BadSeed DNA
rejectedjs said:
There were two main roms I wanted to try after I finally S-OFF'd my phone yesterday. Hatka Supreme 1.1.0 and Carbon. Neither of these worked and I'm glad that I backed up my S-OFF rooted stock rom. Hatka Supreme, the guy states its best to use Beast Mode kernal with the rom, which I flashed after I installed the room, and it just randomly reboots at the splash screen/a few seconds after getting into Android, so I restored my stock and everything worked fine. Next, I tried Carbon, and it just sat there at the carbon flash screen for like 20 minutes, so again, I had to restore to stock. Is there something I'm doing wrong? Is there a difference between Original Android Development and Android Development? Should I be looking at the original or what? I'm really lost, I'm going to try another rom, hopefully someone replies to this before it finishes downloading. Thanks for the help.
EDIT: I'd rather just sit and wait to see if someone replies before I waste time downloading another rom...any help would be appreciated.
Click to expand...
Click to collapse
I'm no expert, but when u flashed hatka, did u reboot into the system before flashing beast mode kernel? Flashing a kernel in the same recovery session is a no no. Also, beast mode is not compatible with carbon, fyi.
Sent from my HTC6435LVW using Tapatalk 4 Beta
kelvinnotcalvin said:
I'm no expert, but when u flashed hatka, did u reboot into the system before flashing beast mode kernel? Flashing a kernel in the same recovery session is a no no. Also, beast mode is not compatible with carbon, fyi.
Sent from my HTC6435LVW using Tapatalk 4 Beta
Click to expand...
Click to collapse
I did that the first time, and thats when I started experiencing it, so I figured that was the problem. So I restored to stock, and then just tried flashing the rom and booting, still same thing, rebooting every 5 seconds. Sometimes I'm able to get into settings, scroll up and down a few times, and then it reboots.
EDIT: If I remember correctly, I didn't even flash beast mode kernel after I flashed carbon.
rejectedjs said:
EDIT: If I remember correctly, I didn't even flash beast mode kernel after I flashed carbon.
Click to expand...
Click to collapse
If you had you never would have seen the carbon boot animation I don't think, just a white scrambled screen.
Tapatalked from my HTC DNA - Carbon
pio_masaki said:
If you had you never would have seen the carbon boot animation I don't think, just a white scrambled screen.
Tapatalked from my HTC DNA - Carbon
Click to expand...
Click to collapse
What exactly is the problem I'm experiencing here? x.x Of all roms I REALLY wanted to try Hatka, why me...
rejectedjs said:
What exactly is the problem I'm experiencing here? x.x Of all roms I REALLY wanted to try Hatka, why me...
Click to expand...
Click to collapse
I've had the same sort of thing happen to me when we first started working with CM. I had to lock up and run the RUU then unlock again, started flashing normally again after that.
Tapatalked from my HTC DNA - Carbon
pio_masaki said:
I've had the same sort of thing happen to me when we first started working with CM. I had to lock up and run the RUU then unlock again, started flashing normally again after that.
Tapatalked from my HTC DNA - Carbon
Click to expand...
Click to collapse
You mean you want me to go back to pure stock and soff all over again?
rejectedjs said:
You mean you want me to go back to pure stock and soff all over again?
Click to expand...
Click to collapse
I don't want you to do anything, in was just saying what I did to correct it when it happened to me.
And no, I didn't day s-on, I said relocked, the RUU won't run on an unlocked device. Locked and son are different.
Tapatalked from my HTC DNA - Carbon
pio_masaki said:
I don't want you to do anything, in was just saying what I did to correct it when it happened to me.
And no, I didn't day s-on, I said relocked, the RUU won't run on an unlocked device. Locked and son are different.
Tapatalked from my HTC DNA - Carbon
Click to expand...
Click to collapse
I've never had so many problems just trying to flash a Rom before, this is crazy...I'm seriously at a loss about what to do other than stay on rooted stock
bump?..I really want some help..
Did you figure it out? I'd do what pio said. He's kind of amazing. He's a very smart man who most likely knows what he's doing
Sent from my HTC6435LVW using xda app-developers app
Well let me explain my predicament. The other day I flash somex's something explosive rom after a wipe of the everything I need to wipe ( Data,Cache,Davlik) When it was finished flashing I got to rebooting. I ended up with a blank, yet illuminated screen ( if that makes sense) I waited about 20 minutes. After coming to the conclusion that the ROM doesn't work I did another wupe of everything needed. Then i flashed JoseGalre's ROM since it has aroma it told me that it had an error and coundln't finsih the instalation. I wiped again and reflashed, same error. I wanted to see what would happen if it let it boot up w/o recovery and it ended up in a boot loop. I tried to go back to 4ext and it seemed to load up just fine but half way through the startup it ends up back in the bootloop. I ran Hasoon's all in one kit and flashed TWRP and it worked just fine until I flash a rom. It seemed to be working just fine then it suddenly crashes and we're back in the loop. I've been trying to fix for the last few days but to no avail. I marked the title as urgent because my parents are going out of town for the weekend and I really need a phone. They havn't a clue that it doesn't work becausse they get home before me. Any help would be appreciated a great deal.
I've had something similar happen and freaked out my phone was down for half a day.
Try booting into the boot loader by holding vol down and power boot into recovery, wipe everything then format everything except SD card and try restoring a backup. Hopefully you made one or two in the past.
Sent from my HTC Amaze 4G running Evervolv jellybean 4.3
Illstatic said:
Well let me explain my predicament. The other day I flash somex's something explosive rom after a wipe of the everything I need to wipe ( Data,Cache,Davlik) When it was finished flashing I got to rebooting. I ended up with a blank, yet illuminated screen ( if that makes sense) I waited about 20 minutes. After coming to the conclusion that the ROM doesn't work I did another wupe of everything needed. Then i flashed JoseGalre's ROM since it has aroma it told me that it had an error and coundln't finsih the instalation. I wiped again and reflashed, same error. I wanted to see what would happen if it let it boot up w/o recovery and it ended up in a boot loop. I tried to go back to 4ext and it seemed to load up just fine but half way through the startup it ends up back in the bootloop. I ran Hasoon's all in one kit and flashed TWRP and it worked just fine until I flash a rom. It seemed to be working just fine then it suddenly crashes and we're back in the loop. I've been trying to fix for the last few days but to no avail. I marked the title as urgent because my parents are going out of town for the weekend and I really need a phone. They havn't a clue that it doesn't work becausse they get home before me. Any help would be appreciated a great deal.
Click to expand...
Click to collapse
I don't think you wiped properly. You needed to format ALL PARTITIONS. I can't stress that enough lol.
Edit: Go into bootloader first. Hold volume down then hold power as well. Choose recovery and format all partitions. If that works you're good! :thumbup:
Use the toolkit and flash 4ext. And make sure whenever you flash Roms that you format all partitions.
If that doesn't work you need to flash a RUU, get it back to stock, it will still retain S OF. Then flash 4ext again. Your problems should be fixed for sure if my first method doesn't work.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Hey guys it completly out of the question to format my internal storage so keep that in mind
GB or IC RUU and which one?
You don't have to format internal storage just data, cache, system, and boot
Sent from my HTC Amaze 4G running CyanogenMod 10.1
Illstatic said:
Hey guys it completly out of the question to format my internal storage so keep that in mind
GB or IC RUU and which one?
Click to expand...
Click to collapse
Just choose format all partitions.
If you want to use a ruu use the T-Mobile ICS RUU.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
So i changed the name of the RUU i download to PH85img.zip and use the all in one tool kit to flash it. The black htc loading screen came up. I waited until it finished and then the bootloader came up with a list of things it head to unzip and then load. After all of that was finished it gave me an error. After reading a message that you should get an error ( i now realize this was at another stage) so i though nothing of it and rebooted. A black screen with 4 warning triangles came up. I let it load all day and when i got home i plugged it back in and I noticed it looked like it was unplugging after securing the charger in I came the conclusion that it wasn't holding a charge and dying on the battery. Normally I would leave it alone but when you plug in the charger it turns itself on. I've began living with the fact that my phone is bricked. But any help would be appreciated.
BTW is there a way to get data (music pictures contacts) that were saved on the internal storage?
Probably should have gone with full caps on the PH85IMG.zip
It's easier just to put the zip on your external sdcard and gone in to bootloader.
Sent from my HTC_Amaze_4G using xda app-developers app
chevycowboyusa said:
Probably should have gone with full caps on the PH85IMG.zip
It's easier just to put the zip on your external sdcard and gone in to bootloader.
Sent from my HTC_Amaze_4G using xda app-developers app
Click to expand...
Click to collapse
So is there anything that I can do when I plug it in it wont boot or charge at all so am i truly bricked or is there still hope
Illstatic said:
So is there anything that I can do when I plug it in it wont boot or charge at all so am i truly bricked or is there still hope
Click to expand...
Click to collapse
Should be hope, check out the unbricking project...
http://forum.xda-developers.com/showthread.php?t=1627882:cowboy: