Ok, I looked around and cannot find an answer that works for me for this issue. I am wondering if it has to do with my phone having S-Off? I am most likely wrong, but i have to know whats going on. No matter what I try, I cannot get My Rezound to go from GB to ICS, ANY ICS BASED ROM for that matter. I checked MD5, Tried with battery door both removed and attached, with or without the SIM card inserted into the phone. The phone boots up almost 100%. I get a message saying "Updating Android" and it says its updating or doing something to 160 apps, the system then reboots, when it gets past the 4G screen again, It says that the boot was completed, I have no signal, i checked on the service type and its correct, tried a factory reset, and still nothing, the system just continues to boot loop over and over again, and when it boots up i cannot get past the Activation screen where it says that the phone is trying to contact Verizon to Auto Activate. I can go back to GB easily, and that works %100. Any and all information would be useful, Only reason why i think this might have to do with S-Off is because my first Rezound was S-On and worked just fine going to ICS, while this new one has S-Off and is just not cutting it.
If you have s-off the rom image could contain a radio update. That could be getting you...also data is off by default in some ICS ROMs.
Sent from my ADR6425LVW using Tapatalk
Sent from my ADR6425LVW using Tapatalk
MrSmith317 said:
If you have s-off the rom image could contain a radio update. That could be getting you...also data is off by default in some ICS ROMs.
Sent from my ADR6425LVW using Tapatalk
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
so what would be recommended in this type of situation? I know its not the data being off thats causing the issue, because when i boot up i dont have a signal at all, and the lock screen instead of showing VZW banner it says No Signal. Would the Radio being an issue also cause boot loop issues?
Did you put the battery cover on the phone ?
Edit saw that u did sorry ...
Sent from my Dinc... I mean Rezound
Only thing i can think of is that the ICS rom you flashed has data off automatically, and requires you to keep pressing the home button until it passes the activation screen.
Also make sure your battery cover is on like yojoe600 said, your antenna is connected to the cover and without it you will have no signal.
who_mike_d said:
Only thing i can think of is that the ICS rom you flashed has data off automatically, and requires you to keep pressing the home button until it passes the activation screen.
Also make sure your battery cover is on like yojoe600 said, your antenna is connected to the cover and without it you will have no signal.
Click to expand...
Click to collapse
this is just sooooooooo irritating. all that i have tried, this is kinda depressing. One interesting thing that i did come across though. When i flashed the BAMF GB, and tried to go from rom to rom to rom, i didnt get any MainVer error.... Dont know if thats just because S-Off allows you to go from one to another freely, or if its just not taking these updates.....
S-off has no mainvar issues. Try putting the gb radio into a PB zip or whatever the resound uses and flash that and boot to see of you get data then
Sent from my ADR6425LVW using XDA App
hey guys, its not just data, the phone is bootlooping on him.
I know several people have s-off devices. You might try looking over on rootzwiki as well. Maybe a dev with s-off can help.
I am one of those people with an s-off and I have had no issues with it but I also updated to the ICS radio AMD have no issues so I'm not totally sure what not working with yours
Sent from my ADR6425LVW using XDA App
werdna87 said:
I am one of those people with an s-off and I have had no issues with it but I also updated to the ICS radio AMD have no issues so I'm not totally sure what not working with yours
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
Not sure what is going on with mine that is making it so different. This is just frustrating, last thing that im going to try is going to be flashing th kernel through adb, know that whould not matter too much, but i'll give it a shot, not like it would hurt at all.
dalvear88 said:
Not sure what is going on with mine that is making it so different. This is just frustrating, last thing that im going to try is going to be flashing th kernel through adb, know that whould not matter too much, but i'll give it a shot, not like it would hurt at all.
Click to expand...
Click to collapse
Ok , so i tried this, and as i thought not much happened, more of the same. No real help at Rootz either sadly. I need to find me an S-Off Dev.... lol
On a side note, how would one go about flashing a different recovery.img on an S-Off device, do i have to adb it, or can i do it on the fly? If so, how?
Last thought...did you try the bootloop fix? ##whatever after booting without the battery covery etc...?? There' s a full thread on it.
MrSmith317 said:
Last thought...did you try the bootloop fix? ##whatever after booting without the battery covery etc...?? There' s a full thread on it.
Click to expand...
Click to collapse
yeah was about to give that a go, but the system seems to shut down before i get to the phone portion. I'm having to use the Emergency Call option to get to the dialer since the phone sits on the Self Activation Page.
Before anyone can help you fully and properly, more information needed!
What ROM are you trying to install?
angryPirate12 said:
Before anyone can help you fully and properly, more information needed!
What ROM are you trying to install?
Click to expand...
Click to collapse
what you mean more info, my original post was pretty clear, dont mean to be snappy or anything, i could try to give more info maybe. I've tried all the "fixes" and so far nothing works. ALL AND ANY ICS BASED ROMS are not staying stable on my phone. They get stuck in what i think is the data bootloop, but i cannot access the dial pad other than through the Emergency dial pad, i input the *#*#4636#*#* and nothing comes up, i try without the battery cover, and without the SIM card as well (Also have tried Various combinations of SIM and Battery Cover removals and inclusions). The device has S-Off, and is Unlocked with DevUnlock, and has Perm Root.
Like I stated in my initial post, the leak may contain a radio update that your phone(and the network) isn't ready for. We wouldn't get that update because our radios are locked and only a signed update from HTC would install it. I'd say back down to GB and wait it out...or post in the thread of the ROM maker and ask them about the radio.
dalvear88 said:
what you mean more info, my original post was pretty clear, dont mean to be snappy or anything, i could try to give more info maybe. I've tried all the "fixes" and so far nothing works. ALL AND ANY ICS BASED ROMS are not staying stable on my phone. They get stuck in what i think is the data bootloop, but i cannot access the dial pad other than through the Emergency dial pad, i input the *#*#4636#*#* and nothing comes up, i try without the battery cover, and without the SIM card as well (Also have tried Various combinations of SIM and Battery Cover removals and inclusions). The device has S-Off, and is Unlocked with DevUnlock, and has Perm Root.
Click to expand...
Click to collapse
When I say more info, I mean don't describe every symptom... tell us specifically what you did. Every ICS ROM is unique, like for example I last installed newtoroot's Senseless 4.0.3 ROM. In order to use it, I had to flash a ICS Kernel, I used the fastboot method. Then I could flash the ROM using AmonRa Recovery, and it would boot and operate effectively.
That's the kind of specifics we need, so we can follow your steps and identify possible error points, if any.
angryPirate12 said:
When I say more info, I mean don't describe every symptom... tell us specifically what you did. Every ICS ROM is unique, like for example I last installed newtoroot's Senseless 4.0.3 ROM. In order to use it, I had to flash a ICS Kernel, I used the fastboot method. Then I could flash the ROM using AmonRa Recovery, and it would boot and operate effectively.
That's the kind of specifics we need, so we can follow your steps and identify possible error points, if any.
Click to expand...
Click to collapse
Definetly more descriptive lol thank you for the breakdown infact. In that case, last one i tried what the ICS Sense Redefined, and I tried to use the fastboot method for the Included Kernel as well, but that didnt work at all, what ICS Kernel did you flash to get it to work? a Pre-Packaged one? When installing, I did a full wipe (Both the Amon Ra Factory Reset option and the SuperWipe that is in the Dev Forum) installed the Rom, went into the Bootloader and did ADB CMD of fastboot flash boot boot.img and thats about it.
dalvear88 said:
Definetly more descriptive lol thank you for the breakdown infact. In that case, last one i tried what the ICS Sense Redefined, and I tried to use the fastboot method for the Included Kernel as well, but that didnt work at all, what ICS Kernel did you flash to get it to work? a Pre-Packaged one? When installing, I did a full wipe (Both the Amon Ra Factory Reset option and the SuperWipe that is in the Dev Forum) installed the Rom, went into the Bootloader and did ADB CMD of fastboot flash boot boot.img and thats about it.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=22203549&postcount=40
That is the one I used. If you're having issues with fastboot flashing the kernel, you may want to throw the PH98IMG.zip onto your external sd-card and boot into HBOOT then hit vol up to install it that way
angryPirate12 said:
http://forum.xda-developers.com/showpost.php?p=22203549&postcount=40
That is the one I used. If you're having issues with fastboot flashing the kernel, you may want to throw the PH98IMG.zip onto your external sd-card and boot into HBOOT then hit vol up to install it that way
Click to expand...
Click to collapse
ok, i'll give this a shot really quick and do through ext. sd. thanks for the link btw, you've been extremely helpful. let ya know how this goes for me.
Related
Alright i need help badly. I consider myself an advanced noob in installing roms and kernals on a phone. I have the rezound. I unlocked it about a week about and went through the step by step instructions. I installed ziggys kernal. I was getting some bootloops but not to many until this morning. My phone kept bootlooping. I would take the battery out and put it back and it would do it again. I tried wiping the date cache and dalvik. Nothing. I then formatted all to ext3. After i did that it said i need to install a rom. I try to restart my phone and it just stays on the HTC screen. I tried to do the factory restore. Nothing. I have to put my sd card in after i get into recovery because when i go to the bootloader screen the HBOOT does something and then asks me if i want to do an update. I tried and hit yes and it did it then reboots but nothing. When i hit no it just wants me to reboot my phone, which does nothing for me. As it is right now my phone wont load. it just stays on the HTC screen. HELP please
http://forum.xda-developers.com/showthread.php?t=1394659
Try this, but you should really search first.
I would try that but my phone will not boot. it will not go past the HTC start up screen
Evo4gLI said:
http://forum.xda-developers.com/showthread.php?t=1394659
Try this, but you should really search first.
Click to expand...
Click to collapse
The other half of the problem is that it sounds like he formatted ext3 and wiped his ROM. So, he'd have to reboot back into recovery and restore a backup or drop a new ROM on the phone via USB.
Grab the RUU and start all fresh again.
MrSmith317 said:
The other half of the problem is that it sounds like he formatted ext3 and wiped his ROM. So, he'd have to reboot back into recovery and restore a backup or drop a new ROM on the phone via USB.
Grab the RUU and start all fresh again.
Click to expand...
Click to collapse
Good point. I'm in class, so I just read it quickly. RUU sounds like the way to go.....start with a clean slate.
how do i get to the RUU
See "shipped Rom collection" sticky in dev section
Sent from my ADR6425LVW using XDA App
Good Luck
This is one of the reasons I have not tried to hack this device. Although I may unlock/root my Rezound I'm not in a hurry to. It's really a great device. Just too expensive for me to maybe mess up. Especially since its our own fault if we do. Can't blame the carrier/manufacturer for not paying to fix/replace either. Hopefully you get it fixed soon. I know I wouldn't want to have to go through all that either.
i just installed the CleanRom. Ill let you know if this works
installed cleanrom but now my wifi says error and wont connect
Abead84 said:
installed cleanrom but now my wifi says error and wont connect
Click to expand...
Click to collapse
You need to reflash the kernel in order to get wifi to work.
Abead84 said:
installed cleanrom but now my wifi says error and wont connect
Click to expand...
Click to collapse
The answer should be in the CleanRom thread but as far as I know if you flashed Ziggy's Kernel, you should reflash it and that should solve the problem.
Oops, just noticed this was already answered.
i flashed a kernel and its all good now
Abead84 said:
i flashed a kernel and its all good now
Click to expand...
Click to collapse
Glad you got it all back. That would scare the sh*t out of me
WasabiWa83 said:
Glad you got it all back. That would scare the sh*t out of me
Click to expand...
Click to collapse
It shouldn't. You can't brick with unlock S-On. If you can get to HBOOT, you are fine. And there is no way to overwrite HBOOT yet.
con247 said:
It shouldn't. You can't brick with unlock S-On. If you can get to HBOOT, you are fine. And there is no way to overwrite HBOOT yet.
Click to expand...
Click to collapse
And does it need to be said that this phone has been out for less than a month? Maybe we should give the devs a chance to work out the kinks before we start flashing.
I *really* miss WiFi tethering that I used to do with my DInc, but I am not about to root in the first two weeks of ownership before I see good, dependable feedback from the community.
I love this phone too much.
Sent from my ADR6425LVW using Tapatalk
con247 said:
It shouldn't. You can't brick with unlock S-On. If you can get to HBOOT, you are fine. And there is no way to overwrite HBOOT yet.
Click to expand...
Click to collapse
That's damn good to know
WasabiWa83 said:
That's damn good to know
Click to expand...
Click to collapse
Actually you might be able to mess up the partitions or something, but HTC limits our ability to **** up the phone pretty well
WookieFan said:
And does it need to be said that this phone has been out for less than a month? Maybe we should give the devs a chance to work out the kinks before we start flashing.
I *really* miss WiFi tethering that I used to do with my DInc, but I am not about to root in the first two weeks of ownership before I see good, dependable feedback from the community.
I love this phone too much.
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
Not trying to knock you but I don't see the point in waiting. Flashing a rom is fairly straightforward and even flashing kernels is for the most part. I had an Incredible prior to this and I am absolutely in love with my phone...that's why I read how to do things properly and learn from others mistakes.
Take the plunge! It's great on the otherside
WookieFan said:
I *really* miss WiFi tethering that I used to do with my DInc
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
There is a wifi tether app that doesn't require root. Koush is the dev. I tried it and it worked. That was the only thing I would have needed root for also. You should be able to find it if you search for it. If not, I'll find the link.
Edit: I found the link
https://plus.google.com/u/0/103583939320326217147/posts/1Yy1jb9z4TA
Sent from my ADR6425LVW using Tapatalk
Okay guys, I have an HTC Evo 3D CDMA that is somewhat unusable. All I did was root the phone and in a few days the phone just wouldn't start up. It gets stuck on the HTC logo. I've tried getting it into download mode to flash a new stock firmware (but it didn't want to), I've tried to put the .zip stock firmware file onto the sd card to "install zip from sd card", I've tried to put the update file on the sd card to install it through "hboot", and even factory resetting it, but it still would get stuck on the logo and fail to boot up. I've tried just about everything I can think of, or find on the internet. Any other suggestions or solutions?
Daaaavinnn said:
Okay guys, I have an HTC Evo 3D CDMA that is somewhat unusable. All I did was root the phone and in a few days the phone just wouldn't start up. It gets stuck on the HTC logo. I've tried getting it into download mode to flash a new stock firmware (but it didn't want to), I've tried to put the .zip stock firmware file onto the sd card to "install zip from sd card", I've tried to put the update file on the sd card to install it through "hboot", and even factory resetting it, but it still would get stuck on the logo and fail to boot up. I've tried just about everything I can think of, or find on the internet. Any other suggestions or solutions?
Click to expand...
Click to collapse
Were you able to reflash a kernel or the stock ROM?
I couldn't flash ANYTHING. -_-
Sent from my GT-I9100 using XDA App
I made the mistake of flashing one of the stock roms derived from RUU which was a big mistake since it flashed the hboot I no longer have revolutionary which lead me to not being able to fastboit anything. I can get the adb to.connect to the device while in recovery with system mounted. but that's pretty much it. If i install a custom ROM when I reboot revolutionary will see device but not ling enough to.root and install the drivers. Just setup your pc to use fastboot otherwise you might do the same thing I did. After two days of searching trying different things my fix was going and buying a new phone last night.
Sent from my PG86100 using XDA App
mteezey said:
I made the mistake of flashing one of the stock roms derived from RUU which was a big mistake since it flashed the hboot I no longer have revolutionary which lead me to not being able to fastboit anything. I can get the adb to.connect to the device while in recovery with system mounted. but that's pretty much it. If i install a custom ROM when I reboot revolutionary will see device but not ling enough to.root and install the drivers. Just setup your pc to use fastboot otherwise you might do the same thing I did. After two days of searching trying different things my fix was going and buying a new phone last night.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
If you relocked your phone "fastboot oem lock" and installed a stock RUU, this should have brought your phone back to stock. This wasn't the case?
---------- Post added at 10:00 AM ---------- Previous post was at 09:55 AM ----------
Daaaavinnn said:
Okay guys, I have an HTC Evo 3D CDMA that is somewhat unusable. All I did was root the phone and in a few days the phone just wouldn't start up. It gets stuck on the HTC logo. I've tried getting it into download mode to flash a new stock firmware (but it didn't want to), I've tried to put the .zip stock firmware file onto the sd card to "install zip from sd card", I've tried to put the update file on the sd card to install it through "hboot", and even factory resetting it, but it still would get stuck on the logo and fail to boot up. I've tried just about everything I can think of, or find on the internet. Any other suggestions or solutions?
Click to expand...
Click to collapse
When you root your phone, never accept updates unless you unroot your phone and go back to stock. Are you on hboot 1.5? I would suggest finding a rom that you want to flash (I recommend Myn's warmtwopoint3 RLS1 Deodex). To do this go into fastboot USB and load the custom recovery in the folder you downloaded to root your phone "fastboot boot recovery.img" (recovery.img should be replaced with the name of the CWM***.img file in that folder. This will give you full access to write the kernal and install the rom). Your issue is only likely kernal related so unless you do what I just mentioned, you wont have access to write a new kernal.
JayDaKissEP said:
Your issue is only likely kernal related so unless you do what I just mentioned, you wont have access to write a new kernal.
Click to expand...
Click to collapse
Agreed. Sounds like a kernel issue to me.
JayDaKissEP said:
If you relocked your phone "fastboot oem lock" and installed a stock RUU, this should have brought your phone back to stock. This wasn't the case?
---------- Post added at 10:00 AM ---------- Previous post was at 09:55 AM ----------
When you root your phone, never accept updates unless you unroot your phone and go back to stock. Are you on hboot 1.5? I would suggest finding a rom that you want to flash (I recommend Myn's warmtwopoint3 RLS1 Deodex). To do this go into fastboot USB and load the custom recovery in the folder you downloaded to root your phone "fastboot boot recovery.img" (recovery.img should be replaced with the name of the CWM***.img file in that folder. This will give you full access to write the kernal and install the rom). Your issue is only likely kernal related so unless you do what I just mentioned, you wont have access to write a new kernal.
Click to expand...
Click to collapse
I have hboot 1.4 it wasnt locked. I just falshed the pg86img for my hboot but since it flashed the hboot too it doesn't have fastnoot anymore
Sent from my PG86100 using XDA App
mteezey said:
I have hboot 1.4 it wasnt locked. I just falshed the pg86img for my hboot but since it flashed the hboot too it doesn't have fastnoot anymore
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Does it still show hboot 1.4? According to the instructions, after the PG86IMG.zip installs, you need to go into fastboot and type "fastboot oem writesecureflag 3"
I think your probably just doing something wrong. Pull your battery out, put it back in, hold down volume button and power to boot into bootloader. Explain to me what you see. You should see fastboot on the top and you should be able to press the power button to enter fastboot and when you plug in your phone it will show fastboot usb. If this isnt happening I'm very curious as to what is.
Daaaavinnn said:
Okay guys, I have an HTC Evo 3D CDMA that is somewhat unusable. All I did was root the phone and in a few days the phone just wouldn't start up. It gets stuck on the HTC logo. I've tried getting it into download mode to flash a new stock firmware (but it didn't want to), I've tried to put the .zip stock firmware file onto the sd card to "install zip from sd card", I've tried to put the update file on the sd card to install it through "hboot", and even factory resetting it, but it still would get stuck on the logo and fail to boot up. I've tried just about everything I can think of, or find on the internet. Any other suggestions or solutions?
Click to expand...
Click to collapse
did you nandroid?
Thanks for the help everyone!
Hi everyone. The only reason why I wrote this status was because I rooted the phone for someone, and gave it back to them in working order. Then about a week later, they came back to me with that problem and I tried to fix it. But with no success as I stated above. They threatened to sue me or take me to small claims for this problem which i didn't even start. Talk about assholes. Anyways, they gave me the option of paying them 350 which is half of what they bought the phone for, or having me try to fix it. If I do fix it, no need to pay, but if I don't then I'd have to pay the full price which is 700. So I've decided to just pay them the 350 to shut their mouth, get my ass out of trouble, and get on with my life.
So yea, I guess I won't be needing this thread anymore. I really want to try fixing it to save me money, but I don't want to risk it. And yea, I know how much of an asshole they're being. But oh well, shows what kind of people they are.
Were you paid initially for services rendered, when first "working" on the phone? Did you make mention any guarantee/warranty for "work" performed? At any time was this person/persons aware of such forum/s which clearly express "do this at your own risk"?
Sent with L*W*H
Anytime your altering anything on anyone's phone always run them through the normal disclaimer. Make certain that they understand that you take ABSOLUTELY NO RESPONSIBILITY for any damage that might be caused by what THEY want you to do. **** happens sometimes and and you gotta cover your ass. This is why every Rom, Radio/firmware updates, themes and guides have the same disclaimer.
Sent from my PG86100 using xda premium
Just read the OP again. You only rooted the phone, didn't install a custom ROM? Also, after rooting it, the person whom you rooted the phone came to you after a week, not a day or two? In that time frame who knows what they tried to do. Also, someone mentioned a kernel issue as the most likely culprit. Are you able to get into recovery, volume down + power/recovery? Can you get to the bootloader/HBOOT screen? If you get anything other than just the bootloader screen, you may still salvage it. Any progress?
Sent with L*W*H
Daaaavinnn said:
Hi everyone. The only reason why I wrote this status was because I rooted the phone for someone, and gave it back to them in working order. Then about a week later, they came back to me with that problem and I tried to fix it. But with no success as I stated above. They threatened to sue me or take me to small claims for this problem which i didn't even start. Talk about assholes. Anyways, they gave me the option of paying them 350 which is half of what they bought the phone for, or having me try to fix it. If I do fix it, no need to pay, but if I don't then I'd have to pay the full price which is 700. So I've decided to just pay them the 350 to shut their mouth, get my ass out of trouble, and get on with my life.
So yea, I guess I won't be needing this thread anymore. I really want to try fixing it to save me money, but I don't want to risk it. And yea, I know how much of an asshole they're being. But oh well, shows what kind of people they are.
Click to expand...
Click to collapse
Did you check the SD card for anything that you didn't put on there? Sounds like you were scammed to me. Give me half now or try to fix it and if you can't you have to pay me full. Something doesn't sound right with that. Sounds like they didn't want to give you enough time to dig to deep into the phone. Did you check to see if it was even the same phone? Did you charge them for this service originally? What was the reason why they wanted root access?
Sent from my PG86100 using xda premium
Replies to all
Robert542 said:
Anytime your altering anything on anyone's phone always run them through the normal disclaimer. Make certain that they understand that you take ABSOLUTELY NO RESPONSIBILITY for any damage that might be caused by what THEY want you to do. **** happens sometimes and and you gotta cover your ass. This is why every Rom, Radio/firmware updates, themes and guides have the same disclaimer.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
That was the mistake I made, by NOT telling them that. Which is why I have absolutely NOTHING to cover my ass. Which is the reason why I'm going to pay for it to get out of this mess.
intrlude said:
Just read the OP again. You only rooted the phone, didn't install a custom ROM? Also, after rooting it, the person whom you rooted the phone came to you after a week, not a day or two? In that time frame who knows what they tried to do. Also, someone mentioned a kernel issue as the most likely culprit. Are you able to get into recovery, volume down + power/recovery? Can you get to the bootloader/HBOOT screen? If you get anything other than just the bootloader screen, you may still salvage it. Any progress?
Sent with L*W*H
Click to expand...
Click to collapse
I don't have the phone with me right now. Which is why I can't try anymore repairs. And I'm not going to in case it fails, then I'll have to pay full price.
Robert542 said:
Did you check the SD card for anything that you didn't put on there? Sounds like you were scammed to me. Give me half now or try to fix it and if you can't you have to pay me full. Something doesn't sound right with that. Sounds like they didn't want to give you enough time to dig to deep into the phone. Did you check to see if it was even the same phone? Did you charge them for this service originally? What was the reason why they wanted root access?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
I don't remember what I did and didn't put on there. So I can't use that as a way to back myself up. And I honestly started thinking that it is a scam, but again, it is kind of is my fault for not taking extra precautionary measures to protect myself in the event that this thing happens. Yes, I did charge for the service. And they didn't say why they wanted it rooted. And even if they are scamming me, I'm just glad it happened sooner so that I could learn from it and prepare myself for the future. As for the money, I am bummed that I have to pay them, but God knows who's the better person and what kind of people they are so I'll let God deal with them.
I have the same issue, sort of. A friend brought me his Evo 3D for me to work on.
My friend 'rooted' his Evo3D through some steps up on youtube that claims root for the 1.5 hboot with S-ON. He then later DL Rom Manager and flashed the freEVO ROM. Now its only useful for WIFI, connected media/google talk/phone dialer/contacts do not work, they all say 'Could not launch the requested activity.'. I have tried factory resetting but it resets to the same issue, cant flash any other rom since there is no actual recovery.
Any ideas on how I can make this thing work
the258 said:
I have the same issue, sort of. A friend brought me his Evo 3D for me to work on.
My friend 'rooted' his Evo3D through some steps up on youtube that claims root for the 1.5 hboot with S-ON. He then later DL Rom Manager and flashed the freEVO ROM. Now its only useful for WIFI, connected media/google talk/phone dialer/contacts do not work, they all say 'Could not launch the requested activity.'. I have tried factory resetting but it resets to the same issue, cant flash any other rom since there is no actual recovery.
Any ideas on how I can make this thing work
Click to expand...
Click to collapse
You will find the answer for your problem here. Sticky's are our friend.
http://forum.xda-developers.com/showthread.php?t=1444285
Sent from my PG86100 using xda premium
thanks, i have already checked it out and tried some but this phone wont 'work'.
the258 said:
thanks, i have already checked it out and tried some but this phone wont 'work'.
Click to expand...
Click to collapse
I'm in the same boat. If I figure my phone out we will have a new guide "how to unbrick the EVO 3d"
Sent from my PG86100 using XDA App
mteezey said:
I'm in the same boat. If I figure my phone out we will have a new guide "how to unbrick the EVO 3d"
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
How is it bricked? Are you able to get into hboot or recovery. Never mind I read back.
Sent from my PG86100 using xda premium
it wont load past the HTC screen..
flashed WARM-3.5-evo3d-unofficial-r100.zip
from sdcard.
had down a factory wipe initially.. tried clearing dalvik cache again but still cannot get past htc screen. ugh
correction i flashed to r119.zip
Did you wipe system as well? How long are you giving it at the HTC Splash screen before you decide it's frozen? I haven't been keeping up to date with the Warm train lately, so I'm not sure if there have been any issues with the builds. I know back in the day, sometimes the build bot that myn used would bork a build from time to time and it wouldn't flash. Have you tried flashing any other builds, or just r119?
yes i did a complete wipe initially.. flashed.. got stuck at screen.. i left it there for 2-3 mins with no response.. just hovering at the HTC screen. I have not tried flashing any other roms as I wasnt sure what if any adverse affect this may have on the current problem
tre976 said:
yes i did a complete wipe initially.. flashed.. got stuck at screen.. i left it there for 2-3 mins with no response.. just hovering at the HTC screen. I have not tried flashing any other roms as I wasnt sure what if any adverse affect this may have on the current problem
Click to expand...
Click to collapse
Before you go any further in trying to figure it out, I would let it sit at the HTC screen a bit longer than a couple minutes. I've had it hang there for 5 or 6 minutes on certain sense roms that I flash, especially on the first boot. Give it a solid 7 minutes or so, and if it's still hanging there..then yea it's stuck. After that, I would simply try flashing something else and see if it works. Perhaps you got a bad download as well, maybe try re downloading it.
suggestions on how to move rom to sdcard if phone isnt booting hence PC isnt seeing the drive?
is it possible to go back to stock rom if this doesnt work?
tre976 said:
suggestions on how to move rom to sdcard if phone isnt booting hence PC isnt seeing the drive?
is it possible to go back to stock rom if this doesnt work?
Click to expand...
Click to collapse
Transfer it to the SD card from recovery. I'm not sure what recovery you're on, but every recovery has the feature to mount the sd card from within recovery. It's like USB MS Toggle or something to that nature. In TWRP 2, I think it's under the 'mount' tab.
Did you just try turning it on again yet, and seeing if it will eventually get past the HTC Screen? Again, it could take a bit more than 2 or 3 minutes on the first boot.
EDIT: And yea, you should be able to get back to a stock ROM no problem, or at least get back to a functioning phone, lol. Did you make a nandroid of your stock setup right after you rooted, before you tried flashing warm?
no i didnt make a nandroid backup sadly. im letting it sit for 10 mins before i give up on tyhis version
I don't think that ROM will boot as I'm pretty sure it has no boot image in it. Joelz was doing some stuff on the later builds and removed the bootimage.
Go into the thread and look for Vin's post. He is on the front page or on post 2. He has been the one updating the ROM for Joelz. the last version I knew of was around 01/12 or so?
tre976 said:
no i didnt make a nandroid backup sadly. im letting it sit for 10 mins before i give up on tyhis version
Click to expand...
Click to collapse
Again, you said you're hboot 1.4, right? So you S-offed with revolutionary? Cuz if you're 1.5, then we're missing an important step....
Sent from my PG86100 using Tapatalk
Never mind, 01/27/12 was his last update.
Here ya go, flash this one.
http://forum.xda-developers.com/showpost.php?p=21019364&postcount=279
KB112 said:
I don't think that ROM will boot as I'm pretty sure it has no boot image in it. Joelz was doing some stuff on the later builds and removed the bootimage.
Go into the thread and look for Vin's post. He is on the front page or on post 2. He has been the one updating the ROM for Joelz. the last version I knew of was around 01/12 or so?
Click to expand...
Click to collapse
LOL, that would certainly explain his problems. As I said, I haven't been keeping up to date with the warm team
Sent from my PG86100 using Tapatalk
Yeah, I read his post too fast. I didn't realize he was flashing Sense 3.5 version. Vins version is really nice and clean, he's done an excellent job helping JoelZ and keeping the ROM alive.
k2buckley said:
Again, you said you're hboot 1.4, right? So you S-offed with revolutionary? Cuz if you're 1.5, then we're missing an important step....
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
no it was 1.4 from revolutinary.io.. it has the nandroid option i missed that step in the instructions before flashing. Thanks i'll try the link above
k2buckley said:
Transfer it to the SD card from recovery. I'm not sure what recovery you're on, but every recovery has the feature to mount the sd card from within recovery. It's like USB MS Toggle or something to that nature. In TWRP 2, I think it's under the 'mount' tab.
Did you just try turning it on again yet, and seeing if it will eventually get past the HTC Screen? Again, it could take a bit more than 2 or 3 minutes on the first boot.
EDIT: And yea, you should be able to get back to a stock ROM no problem, or at least get back to a functioning phone, lol. Did you make a nandroid of your stock setup right after you rooted, before you tried flashing warm?
Click to expand...
Click to collapse
gives me a Mount system or mount /data..
oh i see it i mounted sdcard.. oddly windows doesnt see the card tho as a drive still
tre976 said:
gives me a Mount system or mount /data..
oh i see it i mounted sdcard.. oddly windows doesnt see the card tho as a drive still
Click to expand...
Click to collapse
What recovery are you using?
It should be Toggle USB or something like that
i used my wifes phone sdcard to bypass the problem. that flash got me to a loading phone boot now. thanks! but i'm apparently not connecting to sprint. lol. go figure..
fwiw im using twrp 1.0.3
Ok, now you may have to call them ask to have your data reset. There is a specific thing to ask for. It's in the threads on how to root the Evo 3D.
I was rooted on MeanROM, and from TWRP I cleared the cache and delvic cache and did a factory wipe, then tried to install the cm10 nightly build, but it said failed, so I cleared and wiped again and tried installing the FreshEVO ROM that I had on it before the MeanROM, it never finished installing, just froze after a while. then TWRP restarted then went into the white HTC "quietly brilliant" screen with the red disclaimer and stuck there. When i hold the power down, it just reboots back to this screen. I cant get it into recovery or bootloader or anywhere but this. My computer isn't recognizing the phone, I tried to adb to it from cmd but its not showing up. I don't think i had the latest hboot or whatever on it, it's been probably two months since i first rooted it. any help would be great, please and thank you. I'm heading to work but i'll check this on my breaks and answer any questions i can about what ive done. I was about to trade the phone for an s3 this saturday, but im sure he wont want it like this! THANK YOU.
I'm just gonna say this and don't take it offensively... That is the risk you took rooting your phone.. if you can get into bootloader, try loading a current ruu on there and see If that works.
Sent from my EVO using Tapatalk 2
thlinx said:
I'm just gonna say this and don't take it offensively... That is the risk you took rooting your phone.. if you can get into bootloader, try loading a current ruu on there and see If that works.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
No offense taken, I understood the risks, and I accept the consequences, which is why I'm fairly calm and not freaking out. I'm going to read more into RUU's on my break, as I'm not completely sure how to do that. Does the computer have to recognize my device for that? I would think so. Is there a trick to getting from this white HTC screen back to TWRP other than trying to reboot or pwr+vol down? Everything just keeps going back here. It wont even turn off without the battery draining.. I'll keep reading on my break, any other helpful comments are definitely welcome. Thanks.
Hold down the power button for 10 seconds and the lights on the capacitive buttons will blink. As soon as the screen goes black wait about half a second then hold volume down and power to get into bootloader then go into recovery.
Hope that helps you. That's how I've always gotten back into recovery when I have a bad flash.
Sent from my EVO using xda premium
BrianBaker said:
Hold down the power button for 10 seconds and the lights on the capacitive buttons will blink. As soon as the screen goes black wait about half a second then hold volume down and power to get into bootloader then go into recovery.
Click to expand...
Click to collapse
This is correct and works. Couldn't boot after trying to install Chainfie 3D drivers but got to recovery this way.
Sent from my EVO 4g LTE on my 3g network.
Happened to me. You have to flash the boot image for cm10 if I recall correctly.
Sent from my EVO
themorningsleeve said:
I was rooted on MeanROM, and from TWRP I cleared the cache and delvic cache and did a factory wipe, then tried to install the cm10 nightly build, but it said failed, so I cleared and wiped again and tried installing the FreshEVO ROM that I had on it before the MeanROM, it never finished installing, just froze after a while. then TWRP restarted then went into the white HTC "quietly brilliant" screen with the red disclaimer and stuck there. When i hold the power down, it just reboots back to this screen. I cant get it into recovery or bootloader or anywhere but this. My computer isn't recognizing the phone, I tried to adb to it from cmd but its not showing up. I don't think i had the latest hboot or whatever on it, it's been probably two months since i first rooted it. any help would be great, please and thank you. I'm heading to work but i'll check this on my breaks and answer any questions i can about what ive done. I was about to trade the phone for an s3 this saturday, but im sure he wont want it like this! THANK YOU.
Click to expand...
Click to collapse
did you ever get this going? Sounds like from what i was seeing you got into your BL finally. I would try reinstalling TWRP like the second part of the OP http://forum.xda-developers.com/showthread.php?t=1794867 and then select reboot to recovery from the bootloader ot the button method. If you get back into twrp restore the last working rom setup you had which sounds like meanrom. If it works come back and let us know.
motcher41 said:
did you ever get this going? Sounds like from what i was seeing you got into your BL finally. I would try reinstalling TWRP like the second part of the OP http://forum.xda-developers.com/showthread.php?t=1794867 and then select reboot to recovery from the bootloader ot the button method. If you get back into twrp restore the last working rom setup you had which sounds like meanrom. If it works come back and let us know.
Click to expand...
Click to collapse
Hey guys, on my lunch break, i got it working! I couldn't get it to go into recovery last night for the life of me, but i tried this morning on my way to work and it worked just fine like it should. For some reason none of my roms would install though other than the jewel stock of the latest update with root that i had on here. It worked and I'm good to go. Thanks for the help though! Anyone know why the roms that i installed before are falling Everette i try to install them now? I always wipe and restore first..
themorningsleeve said:
Hey guys, on my lunch break, i got it working! I couldn't get it to go into recovery last night for the life of me, but i tried this morning on my way to work and it worked just fine like it should. For some reason none of my roms would install though other than the jewel stock of the latest update with root that i had on here. It worked and I'm good to go. Thanks for the help though! Anyone know why the roms that i installed before are falling Everette i try to install them now? I always wipe and restore first..
Click to expand...
Click to collapse
I'm willing to bet that you are not S-OFF, and on Hboot 1.15 or higher, and that was the issue when you tried to install CM10. Make sure you read the instructions for flashing CM10, because you have to do something special to flash a kernel when you are S-ON. Now, as far as the old roms not being able to flash, it may be that they were based on the original 1.13 software version with the 1.13 kernel, and it won't let you flash over your current kernel because the version is older. Essentially, if you are S-ON, you can't flash a kernel unless it matches or is a newer version than the one you have. Of course, you can follow one of the many guides on how to flash boot (kernel) with S-ON to get around this.
timtlm said:
I'm willing to bet that you are not S-OFF, and on Hboot 1.15 or higher, and that was the issue when you tried to install CM10. Make sure you read the instructions for flashing CM10, because you have to do something special to flash a kernel when you are S-ON. Now, as far as the old roms not being able to flash, it may be that they were based on the original 1.13 software version with the 1.13 kernel, and it won't let you flash over your current kernel because the version is older. Essentially, if you are S-ON, you can't flash a kernel unless it matches or is a newer version than the one you have. Of course, you can follow one of the many guides on how to flash boot (kernel) with S-ON to get around this.
Click to expand...
Click to collapse
Wow yes this all made perfect sense! I didn't think about my old roms not being compatible, and i also didn't realize i needed s-off for cm10. I have a bad habit of thinking i can just throw a zip on my card and flash it and it will magically work perfectly lol.. This kind of thinking is what gets me into trouble! Where can i read about turning s-off for installing cm10? Are there links on the download page?
themorningsleeve said:
Wow yes this all made perfect sense! I didn't think about my old roms not being compatible, and i also didn't realize i needed s-off for cm10. I have a bad habit of thinking i can just throw a zip on my card and flash it and it will magically work perfectly lol.. This kind of thinking is what gets me into trouble! Where can i read about turning s-off for installing cm10? Are there links on the download page?
Click to expand...
Click to collapse
S-OFF info is here, but because you are having this issue, you probably have HBoot 1.15 or higher, which means you can't achieve S-OFF until a new exploit is found.
http://forum.xda-developers.com/showthread.php?t=1737123
There are methods for flashing kernels here with S-ON here:
http://forum.xda-developers.com/showthread.php?t=1794867
Also, there's the newer twrp dumlock method if you install the latest version ot TWRP (2.2.1). http://teamw.in/project/htcdumlock
timtlm said:
S-OFF info is here, but because you are having this issue, you probably have HBoot 1.15 or higher, which means you can't achieve S-OFF until a new exploit is found.
http://forum.xda-developers.com/showthread.php?t=1737123
There are methods for flashing kernels here with S-ON here:
http://forum.xda-developers.com/showthread.php?t=1794867
Also, there's the newer twrp dumlock method if you install the latest version ot TWRP (2.2.1). http://teamw.in/project/htcdumlock
Click to expand...
Click to collapse
Ok thanks. My main goal is to not screw this phone up before Saturday when i trade it for an S3 so i may not bother, but i will definitely give it a look!
themorningsleeve said:
Wow yes this all made perfect sense! I didn't think about my old roms not being compatible, and i also didn't realize i needed s-off for cm10. I have a bad habit of thinking i can just throw a zip on my card and flash it and it will magically work perfectly lol.. This kind of thinking is what gets me into trouble! Where can i read about turning s-off for installing cm10? Are there links on the download page?
Click to expand...
Click to collapse
You dont have to have s-off though like he said for cm-10 you just need an extra step or two. I dont blame you for trading it in I did the same. Except I am going back to the Gnex.
motcher41 said:
You dont have to have s-off though like he said for cm-10 you just need an extra step or two. I dont blame you for trading it in I did the same. Except I am going back to the Gnex.
Click to expand...
Click to collapse
I had the gnex before this, why did you go back to that out of the other 2?
themorningsleeve said:
I had the gnex before this, why did you go back to that out of the other 2?
Click to expand...
Click to collapse
Well I'm going back cuz of the non htc clustscrew and the openess of the platform. No bs no s on or s off dev unlocks etc...its how a phone should be. Better camera functionality and I know the sammy platform. Imho it may be older but its a far superior device. Could afford any device out there and to me its hands down gnex
Sent from my SPH-M900 using Tapatalk 2
motcher41 said:
Well I'm going back cuz of the non htc clustscrew and the openess of the platform. No bs no s on or s off dev unlocks etc...its how a phone should be. Better camera functionality and I know the sammy platform. Imho it may be older but its a far superior device. Could afford any device out there and to me its hands down gnex
Sent from my SPH-M900 using Tapatalk 2
Click to expand...
Click to collapse
right on. I did enjoy that phone. I LOVE the camera on my EVO LTE though, that's the one thing ill miss about this one. I did just find out that the ass that was supposed to trade me on saturday already traded someone, so i'm stuck with the LTE for a while now, so i might venture into putting cm10 on it, but then again i might wait til a more stable version hits, just depends on how long that may take..
themorningsleeve said:
right on. I did enjoy that phone. I LOVE the camera on my EVO LTE though, that's the one thing ill miss about this one. I did just find out that the ass that was supposed to trade me on saturday already traded someone, so i'm stuck with the LTE for a while now, so i might venture into putting cm10 on it, but then again i might wait til a more stable version hits, just depends on how long that may take..
Click to expand...
Click to collapse
Ruu it back to stock locked and ebay it. Should get enough for nib sealed gnex. I found one for 319.00. Saw a couple s3 on swappa for about 430-440 nib sealed. Saw a bad esn one going for 290ish so yours should be 350ish or more
Sent from my SPH-M900 using Tapatalk 2
CM10 should be going completely open source with the camera very soon. Expect good things.
To the people complaining about HTC and leaving/trading for new phones.... cya.
That isnt helpful here... we dont need an announcement. Just go please.
Rxpert said:
CM10 should be going completely open source with the camera very soon. Expect good things.
To the people complaining about HTC and leaving/trading for new phones.... cya.
That isnt helpful here... we dont need an announcement. Just go please.
Click to expand...
Click to collapse
Me and the op are having a good clean conversation in his thread so.... cya
Sent from my SPH-M900 using Tapatalk 2
motcher41 said:
Me and the op are having a good clean conversation in his thread so.... cya
Sent from my SPH-M900 using Tapatalk 2
Click to expand...
Click to collapse
Take your private conversation to PM?
I have my Evo 3D and I decided I wanted to flash a ROM on it.
Basically I rooted it and went to flash a ROM on it, and ended up deleting the dalvik cache and cache.
The bad part is, I forgot (like a complete idiot) to do a Nandroid backup.
Is there any way to come back from this?
you could just run an RUU and get back to stock.
btw what problem do you have while flashing new roms?
deleting the dalvick cache and cache dousnt matter, it automatically creates it.
If you haven´t backup up your previous rom, then you cant recover it... that´s why it´s called a backup..
So whats the problem?
I think i read it wrong. do you mean you want to restore your previous stock rom + data? if so its not possible to restore the data without a nandroid.
EM|NEM said:
you could just run an RUU and get back to stock.
btw what problem do you have while flashing new roms?
Click to expand...
Click to collapse
That works even though I can only see the bootloader screen / TWRP recovery screen.?
And my problem was that I had an error while trying to flash room. I might have done it wrong.
But I just want my phone to work. I dont need my apps or contacts etc
.
Not sure what the problem is either. If you delete the dalvik turn the phone back on and it automatically recreates it. No problems what so ever.
It sounds like you flashed or tried to flash a ROM without doing a full wipe. However I'm not sure.
Perhaps you could tell us in more detail the problem and what you would like to do and we can help ya..
Sent from my PG86100 using Tapatalk 2
I know that you are trying to help, but all I wanted to know was how to make it back to normal. But seeing as I did it incorrectly, I could really use the help.
I did not do a Nandroid backup.
What I did was try to flash the rom without wiping my phone, like you said.
Then I selected the option of clearing both cache and dalvick cache.
Then tried flashing rom again. Did not work.
I am sorry I cant recall what the error was when doing it, but I will let you know when I try again in a second (if it doesnt work this time.) [ I also found a different tutorial and would like to give it a try.
There isn't a way to get back to the same state your phone was in before wiping it since you did not do a backup. If you are gsm then find the gsm RUU. If CDMA then find the CDMA version. That will get you back to the stock version but it will be as if you just turned it on for the first time ever.
It would be easier to just download a different ROM and put it on your SD card then flash it. Although it won't be stock...
But before doing any of that just boot recovery and do a full wipe. Then reflash the ROM you were trying to install.
I got back to stock with RUU. Then I figured out how to successfully back up and flash my phone with different roms.
Thank you for all your help.
Good luck in your flashing endeavours! Its addicting.
I actually am having an issue. I am trying to flash a rom on my phone and it says im extracting boot.img with a progress bar on the bottom. The progress bar seems to be staying at one point and not moving.
He said something about naming something to PG86IMG and wasnt clear to me what to name PG86IMG.
Any speculations?
Edit: was impatient.
zdirty said:
I actually am having an issue. I am trying to flash a rom on my phone and it says im extracting boot.img with a progress bar on the bottom. The progress bar seems to be staying at one point and not moving.
He said something about naming something to PG86IMG and wasnt clear to me what to name PG86IMG.
Any speculations?
Edit: was impatient.
Click to expand...
Click to collapse
Got it figured out? Phone working?
Sent from my PG86100 using Tapatalk 2
Are you still s-on btw? Since i saw you had problems with boot.img
Try gaining s-off, flash hboot 1.49.0007 and all of your flashing problems will be gone!
klect said:
Are you still s-on btw? Since i saw you had problems with boot.img
Try gaining s-off, flash hboot 1.49.0007 and all of your flashing problems will be gone!
Click to expand...
Click to collapse
Yes I am on s-on. I did not want to do the wire trick.
I didnt either, now having s off, i cant imagine using the evo 3d with s on.
Sent from my Evo 3D GSM using xda app-developers app
klect said:
I didnt either, now having s off, i cant imagine using the evo 3d with s on.
Sent from my Evo 3D GSM using xda app-developers app
Click to expand...
Click to collapse
I tried the wire trick. Couldn't get it to work. Maybe because I used speaker wire which isnt a sold wire but strands. Do you think that makes a difference?
As long as there is a connection all the way through, no. Keep in mind i tried 20 times or so, you have to get the timing right.
Take another look at the demo vid and try again, if you're not sure about the wire, use a paperclip with some tape around it. (tape is important, you don't want your skin to touch the metal)
klect said:
As long as there is a connection all the way through, no. Keep in mind i tried 20 times or so, you have to get the timing right.
Take another look at the demo vid and try again, if you're not sure about the wire, use a paperclip with some tape around it. (tape is important, you don't want your skin to touch the metal)
Click to expand...
Click to collapse
I did the wire trick about a week or two ago and I couldnt time it just right so I just continuously tapped the SD card metal holder dealio with the paperclip about every second and it worked the fourth or fifth try.
Sent from my PG86100 using Tapatalk 2