Related
OK. I apologize for the repeat question, but there seems to just be way too many threads with this mentioned, and way too much sifting for me to find the answer.
I am running Das-bamf gingerbread, de-sensed stripped (which is "wicked" awesome) and I am having a problem both sending and receiving MMS. I tried going into MMS settings and changing the source from Internet to Verizon, but to no avail. Does anybody else know of a solution?
xbostonIrishx said:
OK. I apologize for the repeat question, but there seems to just be way too many threads with this mentioned, and way too much sifting for me to find the answer.
I am running Das-bamf gingerbread, de-sensed stripped (which is "wicked" awesome) and I am having a problem both sending and receiving MMS. I tried going into MMS settings and changing the source from Internet to Verizon, but to no avail. Does anybody else know of a solution?
Click to expand...
Click to collapse
How did you get the menu unlocked to change the settings?
Sent from my ADR6400L using XDA App
It was unlocked. I just changed it. I will post s photo later. I may be wrong IM not a techie, but it still says verizon when I look at it
Sent from my ADR6400L using XDA Premium App
Nobody? I'll head one over to the developers corner.
xbostonIrishx said:
Nobody? I'll head one over to the developers corner.
Click to expand...
Click to collapse
I already have an exact duplicate of this thread open, literally same problem same rom same radio etc. Why open a new one? This needs to be consolidated and focused on in one big thread. So far I'm getting mixed reports. Some people say it works fine. Others say the same no MMS of any form. So idk what to tell you.
I for one know I am tech savvy and am very comfortable with command line and working my way around software, and I know I did everything fine. So I would really like to know what magical rainbow the people who have it working are floating along on, because I'd like a ride too.
I would have posted on your thread but it was like six on three AM and I was on my first cup of coffee.
I got mms working in gingerbread but I has to switch to Cyanogenmod. O only switched becauseI couldn't get my batt to charge with the dasbamf. I will most likely go back when both those issues are worked out
Sent from my ThunderBolt using XDA Premium App
xbostonIrishx said:
I would have posted on your thread but it was like six on three AM and I was on my first cup of coffee.
I got mms working in gingerbread but I has to switch to Cyanogenmod. O only switched becauseI couldn't get my batt to charge with the dasbamf. I will most likely go back when both those issues are worked out
Sent from my ThunderBolt using XDA Premium App
Click to expand...
Click to collapse
Sent you am PM on the charging issue..
Sent from my ADR6400L using XDA Premium App
The title says it all, I need to know when I have a voicemail and I hate youmail and Google voice. Lookin for fluidity and battery life as well. I use my phone for business 17 hours a day. I'm you guys could recommend a ROM, kernel, radio set up. Thanks in advance.
Sent from my ADR6400L using XDA App
Infuse3Th3ory. It's amazing.
Sent from my ADR6400L using XDA App
knothead said:
Infuse3Th3ory. It's amazing.
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
Does the stock voicemail work on it?
Don't know I use Google voice, have since it came out. Post in the thread and see what pops up.
Sent from my ADR6400L using XDA App
All of the GB roms have the vmail notification bug. If you absolutely must have working vmail notification, then go with a Froyo rom
Sent from my ADR6400L using XDA App
refers the OP back to a similar posting a few posts down (that has more replies and to avoid redundancy):
http://forum.xda-developers.com/showthread.php?t=1176922
sublimaze said:
All of the GB roms have the vmail notification bug. If you absolutely must have working vmail notification, then go with a Froyo rom
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
You can fix this very easily
Sent from my TBolt using my f***king thumbs...
sublimaze said:
All of the GB roms have the vmail notification bug. If you absolutely must have working vmail notification, then go with a Froyo rom
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
actually, I think the droidtheory series have a fix for vvm. Reported as working. Not sure why OP is being so picky about Youmail, it has been 100% rock solid for me.
I guess if you have to have a 100% working ROM, your best bet is to stay stock.
knothead said:
Infuse3Th3ory. It's amazing.
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
I have to second this one ... been running it since it was released, and just a smooth running beautiful thing.
sonami said:
You can fix this very easily
Sent from my TBolt using my f***king thumbs...
Click to expand...
Click to collapse
Please Advise ! I would love to have my voicemail notifications working. I'm running Infusetheroy. I've tried youmail, and one other.
Ready5 released a VVM fix for the alpha GB base. I believe its been added to the netflix sticky thread in the mods section. Don't know if VVM works on the new GB base. I've been running th3ory's 3D 6.02 and its terrific for me. I too use my phone for business and it just works, great battery, etc. Will likely run his Infuse release after its baked in awhile. But, this is working so well after a month of constant flashing, I am not ready to move to the new leak just yet.
courtesy of my rooted bolt
ILMF said:
Ready5 released a VVM fix for the alpha GB base. I believe its been added to the netflix sticky thread in the mods section. Don't know if VVM works on the new GB base. I've been running th3ory's 3D 6.02 and its terrific for me. I too use my phone for business and it just works, great battery, etc. Will likely run his Infuse release after its baked in awhile. But, this is working so well after a month of constant flashing, I am not ready to move to the new leak just yet.
courtesy of my rooted bolt
Click to expand...
Click to collapse
It does by changing some code
Sent from my TBolt using my f***king thumbs...
Sorry if this is an obvious answer, but so far have been unable to find a solution through xda and Google searches. I'm currently running Task's b31.
Do you mean for phone calls or for text messaging? or do you mean for the soft keys?
dirtbikerr450 said:
Do you mean for phone calls or for text messaging? or do you mean for the soft keys?
Click to expand...
Click to collapse
Soft keys, key presses, keyboard.
At this time I believe there's no way to adjust it, and it's low on the priority list since it's not adversely affecting anything.
And as to the vibrate when you unlock the screen, I've not found a way to disable it. Seems every thread I've read about it says you can't disable it right now. Hopefully in a future update but it's definitely low on the priority scale for me anyhow.
Please tell me how to reduce vibration intensity on lock screen.
Thanks
Nice find! And only 2 months dead! How many people did it take to dig this up? Shovels or by hand ?
Sent from my SGH-I777 using Tapatalk 2
Kadin said:
And as to the vibrate when you unlock the screen, I've not found a way to disable it. Seems every thread I've read about it says you can't disable it right now. Hopefully in a future update but it's definitely low on the priority scale for me anyhow.
Click to expand...
Click to collapse
sravanz said:
Please tell me how to reduce vibration intensity on lock screen.
Thanks
Click to expand...
Click to collapse
you need to edit the framework.jar
No, YOU need to edit the framework.jar )
Lol. Why u no givez vibration intensity buttttonz?! Haha. I actually got used to it after a while. U can do it yourself, but to me its just....meh. Not one of those uber important things.
Sent from my SGH-I777 using Tapatalk 2
This is simple... Just use the Fluxi kernel. You can adjust the intensity using the xxtweaker app
Foxhound rom has an option to reduce the intensity of vibration.It is the only aosp rom with that option i think.
Sent from my SGH-I777 using XDA
Yeah except he asked how to do it on AOKP. Which is....not foxhound. That's like saying how to I build and compile with windows and someone yelling USE LINUX! lol
Sent from my SGH-I777 using Tapatalk 2
Phalanx7621 said:
Yeah except he asked how to do it on AOKP. Which is....not foxhound. That's like saying how to I build and compile with windows and someone yelling USE LINUX! lol
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
thanx for the advice.i will think twice before posting anything in future.
Sent from my SGH-I777 using XDA
Oh I wasn't trying to be s ****. Anything I say u can take with a grain of salt, its usually always good humor / fun, I never want to make someone feel as if they shouldn't post. If we all stopped sharing ideas it'd get pretty dull eh
Sent from my MB860 using Tapatalk 2
And this is why I say Phalanx is hung like a gnat...
/end troll
Clay
Sent from my SGH-I777 using XDA
clay101eve said:
And this is why I say Phalanx is hung like a gnat...
/end troll
Clay
Sent from my SGH-I777 using XDA
Click to expand...
Click to collapse
Lol bastard stop spying on me in the shower!
dschreiber69 said:
This is simple... Just use the Fluxi kernel. You can adjust the intensity using the xxtweaker app
Click to expand...
Click to collapse
Yuuuuup! There's no way to do it on stock AOKP, but you can if you flash ktoonsez's Fluxi kernel(which has been reported to work amazing with AOKP). Launch xxTweaker -> Sound and Vibration -> Vibration intensity -> BOOM
Re: [ROM] 07-22-2012 JELLYBLUR V1.2 CM7.2 - SPJESTER Production
Media volume appears to be jacked up on this ROM. When turning my volume down 3 notches, it almost goes silent. Did I miss a fix in the settings? Sorry to post this under the "Random Q&A" section but it appears that XDA micromanages harder than my boss. Thus, I can't communicate with the actual dev. Yes, I've searched this site as well as Rootzwiki, but have not found an answer. Thanks for your time!
Sent from my 'Bolt using my thumbs.
I have brought this post to the attention of the dev.
Sent from my ADR6400L using xda premium
I am going to try tirmat 1.4 kernal instead 1.5 tomorrow. I heard its better.. (xda 10 post sucks ..before you can post in dev section) so far this rom has little hick-ups but good.. try next time to add gapps in the d/l (like liquid ics) might be easier..
Sent from my ADR6400L using Tapatalk 2
Its not kernel related im not sure wat it is. I like that it goes quiet quiclly and loud fast honestly lol idk why its being weird tho but im working on it trust me
Sent from my ADR6400L using Tapatalk 2
[SP]JESTER said:
Its not kernel related im not sure wat it is. I like that it goes quiet quiclly and loud fast honestly lol idk why its being weird tho but im working on it trust me
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
I do like how it gets quiet quickly, however it kind of defeats the purpose if it goes silent before you get to the bottom of your media volume. I think whatever it is it's also influencing the peak volume. Don't get me wrong, I've said it before and I'll say it again: by far the most reliable ROM I've run to date on my Bolt. Thanks for all the time you're investing!
Sent from my 'Bolt using my thumbs.
This is the only place I can replay but great build dev. I can't post the picture but I got 1day and 8min off this rom. I just put it back on charger for 30 min total maybe.. I drop it to 3g at work and bump it back to 4g at lunch and I break.. can't wait till the new build ..
Sent from my ADR6400L using Tapatalk 2
I hope this isn't too late to be noticed/I certainly don't want to add to the trouble you've gone to Jester, but I noticed a force close under menu/settings/sound/volume. Not a big deal, just wanted to bring it to your attention since I didn't see it mentioned on the main thread. Thanks for everything you're doing for the community!
Since I can't post in the dev section, just wanted to say thanks again Jester! 1.3 is fantastic so far! One of the most responsive roms I've ran yet. Only one question / issue so far - I ran the PDroid patch this morning, but when I flash it my bolt freezes on the boot animation. Anyone have any suggestions?
EDIT: Changed "period" to "PDroid"
Sent from my ADR6400L using xda app-developers app
Are you clearing caches first?
Sent from my ADR6400L using Tapatalk 2
Get on 1.3 volume and all things broken seem to work fine. Except the brightness toggle settings
Sent from my ADR6400L using Tapatalk 2
[SP]JESTER said:
Get on 1.3 volume and all things broken seem to work fine. Except the brightness toggle settings
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
+1!
Dang, man! This ROM just keeps getting better. I miss the Jelly toolkit for the prop modder, but fortunately ROM Toolbox has one built in so no deal-breaker. I gotta say, you are very dedicated and responsive to fixing issues. Thanks again for all you time!
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
Are you clearing caches first?
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
Yea, I cleared the Dalvik and Cache - just tried it again and I got the same freezing. Also, unrelated, on this rom mlb at bat won't let me watch games. It works on any sense roms, but it can't find my location. Did the gps fix and I get a lock within 2 seconds. Otherwise no issues since flashing!
Sent from my ADR6400L using xda app-developers app
TehFlyingIndian said:
Since I can't post in the dev section, just wanted to say thanks again Jester! 1.3 is fantastic so far! One of the most responsive roms I've ran yet. Only one question / issue so far - I ran the period patch this morning, but when I flash it my bolt freezes on the boot animation. Anyone have any suggestions?
Sent from my ADR6400L using xda app-developers app
Click to expand...
Click to collapse
I totally missed this period patch. What is this and where did you find it?
Sent from my 'Bolt using my thumbs.
U dont need any patch for 1.3
Sent from my ADR6400L using Tapatalk 2
*BAM* said:
I totally missed this period patch. What is this and where did you find it?
Sent from my 'Bolt using my thumbs.
Click to expand...
Click to collapse
Thanks for the notice on that. I meant PDroid, not period. My phone auto corrected me. The PDroid patch was what was giving me trouble
Sent from my ADR6400L using xda app-developers app
TehFlyingIndian said:
Thanks for the notice on that. I meant PDroid, not period. My phone auto corrected me. The PDroid patch was what was giving me trouble
Sent from my ADR6400L using xda app-developers app
Click to expand...
Click to collapse
No problem. I wasn't trying to call you out, just confused. To answer your question, it looks like you may have to patch the ROM yourself to make it compatible. This recent version had fixed compatibility issues with a few ROMs, but since Jester's is new I doubt it includes his ROM (even though it's CM based, there are going to be differences). See the screenshot below or visit: http://forum.xda-developers.com/showthread.php?t=1357056
Then again, I could be completely off base...
Sent from my 'Bolt using my thumbs.
battery drain
I have noticed huge battery drain on this rom. I dont know if its normal but within an hr or 2 I am down to 60% with 50% phone idle. Everything else is smooth.
blublazx said:
I have noticed huge battery drain on this rom. I dont know if its normal but within an hr or 2 I am down to 60% with 50% phone idle. Everything else is smooth.
Click to expand...
Click to collapse
Did you clear battery stats?
Sent from my 'Bolt using my thumbs.
battery drain
*BAM* said:
Did you clear battery stats?
Sent from my 'Bolt using my thumbs.
Click to expand...
Click to collapse
Where would I clear battery stats. I tried to do a battery calibration but wont even let me charge to 100%
The baked in Battery Calibration app will do it for you, but it's recommended to barge to 100% before callibrating. You can also clear battery stats through recovery where you would clear your dalvik. There should be an option to clear battery stats.
Sent from my 'Bolt using my thumbs.
I saw this but was afraid to flash it yet but wondering if anyone here has tried it yet and what their experience was with it
http://forum.xda-developers.com/showthread.php?t=2488082
kevinrocksman said:
I saw this but was afraid to flash it yet but wondering if anyone here has tried it yet and what their experience was with it
http://forum.xda-developers.com/showthread.php?t=2488082
Click to expand...
Click to collapse
A few folks have. I personally have not but I have it d/l.
Hoping Saber and Faux port their kernels eventually.
It's safe
Yes ive used it for a day and I like it so far.
I just flashed it and nothing has exploded yet! So far so good ;-p It seems snappy, it's quite "minimal" as he said. I haven't been able to alter governors/IO schedulers but I'd be a betting man and say this would significantly increase battery life
Works great. Does anyone know if 0.9 will work on MJ4?
Sent from my SM-N900P using XDA Premium 4 mobile app
Flashed and it's working no problem. If anything I'll report back. Thanks for finding this.
Sent from my SM-N900P using XDA Premium 4 mobile app
I saw this but was afraid to flash it yet but wondering if anyone here has tried it yet and what their experience was with it
http://forum.xda-developers.com/show....php?t=2488082
Click to expand...
Click to collapse
Yes i flashed it using Jellybomb Ver 1.0 MI5 overclocked to 2.7 and undervolted -50mv with system tuner so far its stable
I've been using it, since the OP made us Sprint folks aware of it. I haven't had any problems at all. The developer updates frequently, and now that I've started experimenting with the color temperature, the screen colors seem a lot more natural-- not so Samsung cartooney.
Sent from my SM-N900P
Been using it on jellybomb since I saw this thread and is working great
Sent from my SM-N900P using Tapatalk
THunDA said:
Been using it on jellybomb since I saw this thread and is working great
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
Yeah, it's a great kernel. BTW, I responded to your question, in the kernel thread.
Sent from my SM-N900P