Streakdroid no longer has guides posted. Need help with qdl. Win7 64bit drivers wont load. Most posts refer to "extra steps" needed to install but none are showing the steps needed. Please help or post the guide please.
I am currently running 1.9.0 and have been having stability issues and issues installing .apk's
Would like to get the 2.2.2 rom rooted and working.
Check my post here:
http://forum.xda-developers.com/showthread.php?p=14669686#post14669686
still getting nothing. Have the phone in the mode where windows is identifying it as a Qualcomm CDMA Technologies MSM. I am in test mode as per your post. When I point windows to the drivers I just says none found.
QDLTool3rd_20101022_GAUSB1A130500 ;QDL Tool I have downloaded.
Runawaywill said:
still getting nothing. Have the phone in the mode where windows is identifying it as a Qualcomm CDMA Technologies MSM. I am in test mode as per your post. When I point windows to the drivers I just says none found.
QDLTool3rd_20101022_GAUSB1A130500 ;QDL Tool I have downloaded.
Click to expand...
Click to collapse
Assuming you know how to install new devices, plug your phone in and when system manager finds your device change it to:
Qualcomm HS-USB Diagnostics 9002 (in the qdl start page states the same, must have it list device light this for it to work)
If you don't have that get latest drivers from Dell's support web page. Let me know how it works out for you.
vanemburghj said:
Assuming you know how to install new devices, plug your phone in and when system manager finds your device change it to:
Qualcomm HS-USB Diagnostics 9002 (in the qdl start page states the same, must have it list device light this for it to work)
.
Click to expand...
Click to collapse
I don't know how to tell it what a device name is. If i just turn it on it says dell mini. Holding up and on gives me "Qualcomm CDMA Technologies MSM"
go to control panel, go to system, go to device manager, go to Ports (COM & LPT). For me my is associated with COM1, so assume the same for you, doing this from memory, if you have multiple go to each one right click select update driver software, click on browser browse my computer and hopefully you see dell mini or something to that effect.
Click on let me pick, uncheck show compatible hardware, scroll down to qualcomm, in the model box scroll down till you see Qualcomm HS-USB Diagnostics 9002. Click on next follow the steps from there.
Can't remember if I had to reboot or not, but anyways you need to go through the bcd edit steps if you returned your system to normal. Now start qdl tool, holding volume button connect your usb. Hopefully next to the word port in device section you see Qualcomm HS-USB Diagnostics 9002.
If you do run the tool. If not, since I am doing this from memory, you might need to search for the exact steps to get driver update to Qualcomm HS-USB Diagnostics 9002.
I'll rememeber this for later.
I thought you HAD to run QDL tool to flash stock rom again. I didn't realize it was more of an un-bricking tool.
Flashing stock recovery with fastboot now and going to install .pkg from there see how that goes.
Runawaywill said:
I'll rememeber this for later.
I thought you HAD to run QDL tool to flash stock rom again. I didn't realize it was more of an un-bricking tool.
Flashing stock recovery with fastboot now and going to install .pkg from there see how that goes.
Click to expand...
Click to collapse
simple to flash a rom, just do a Google search, can go from any stock rom to any stock rom in less than 10 minutes. Fastboot and Update.pkg are your friends
Related
Hi.
I have a cracked screen (soon to be fixed) Dell Streak 5.
When I connect it to my PC it detects it as USB Input device and install the driver for it.
If I try to change the driver and use QDL Tool Windows says the @location does not have hardware information). I tried Windows 7 and XP with the same results.
MAC and Linux detects it as Qualcomm but there is nothing I can do as there is no ADB server nor FASTBOOT.
The only post regarding this does not have any replies so I dont know what to do.
Best Regards.
Anyone knows? A little help would be appreciated.
where did you get the drivers?
Maybe you can get the dell drivers or load the SDK for android it will install drivers too.
What is the end result you want?
alperin1 said:
where did you get the drivers?
Maybe you can get the dell drivers or load the SDK for android it will install drivers too.
What is the end result you want?
Click to expand...
Click to collapse
I have Android SDK installed, which works properly with other phones.
My question is why does my Streak is recognized as a USB Input Device?
Is it normal?
To get my streak working I had to install dell drivers (got it via here just click on downloads tab and install software but don't launch program after drivers have installed http://www.unlockstreak.com/pages/d...?ref=874b1d7212afe8cc4672f2f53d9976c12a5ea0e5).
After this I launched QDL Tool held vol up and inserted usb cable which launched Qualcomm HS-USB 9002 driver which won't be found, you need to go to drivers which should be in a folder that comes with QDL Tool.
So should go as Drivers - Driver_2.067 - Win 32 (or 64 if your running a 64 bit system) - Whatever OS you are running - qcser - Select 2nd option of Qualcomm Drivers and search for Qualcomm HS-USB 9002 should install when you double click on it and should be ready to go.
Check if QDL Tool has recognised driver via communications port if not close down and reopen.
Click on RUN if driver success and should start restoring Streak, should know when complete as it goes green when done and good.
Note: When installing driver have to manually install it so a case of Update Driver, Browse my computer, Let Me pick, Have Disk, Browse when it shows path to select, then go to path whever QDL is extracted (eg Desktop) and follow folder paths above to get it installed.
Hope this is clear and also hope it helps!!! Good Luck
passion8059 said:
To get my streak working I had to install dell drivers (got it via here just click on downloads tab and install software but don't launch program after drivers have installed http://www.unlockstreak.com/pages/d...?ref=874b1d7212afe8cc4672f2f53d9976c12a5ea0e5).
After this I launched QDL Tool held vol up and inserted usb cable which launched Qualcomm HS-USB 9002 driver which won't be found, you need to go to drivers which should be in a folder that comes with QDL Tool.
So should go as Drivers - Driver_2.067 - Win 32 (or 64 if your running a 64 bit system) - Whatever OS you are running - qcser - Select 2nd option of Qualcomm Drivers and search for Qualcomm HS-USB 9002 should install when you double click on it and should be ready to go.
Check if QDL Tool has recognised driver via communications port if not close down and reopen.
Click on RUN if driver success and should start restoring Streak, should know when complete as it goes green when done and good.
Note: When installing driver have to manually install it so a case of Update Driver, Browse my computer, Let Me pick, Have Disk, Browse when it shows path to select, then go to path whever QDL is extracted (eg Desktop) and follow folder paths above to get it installed.
Hope this is clear and also hope it helps!!! Good Luck
Click to expand...
Click to collapse
Thanks for your info but it's not helping.
It seems than something else was damaged when I cracked the screen because it never detects "Qualcom..."
Best Regards.
Hi I recomend taking your sd card out and put that directly into your pc and if you cant do that maybe borrow a friends smartphone or card reader.
Sent from my Dell Streak using XDA Premium App
stevepork said:
Hi I recomend taking your sd card out and put that directly into your pc and if you cant do that maybe borrow a friends smartphone or card reader.
Sent from my Dell Streak using XDA Premium App
Click to expand...
Click to collapse
Problem fixed!!
The phon had the Volume and Power Flex ripped off, so the phone did not power.
I replaced it and the phone is running now.
Best Regards and thanks to you all.
PLEASE! I need to load a new ROM into my MT6575 phone using Smart Phone Flash tool.
I've installed the Mediatek drivers on 4 different computers in my house (Vista, Window 7, Windows 7 64bit, Windows 8) and I cant get ANY of them to work!!
When I look under Ports (COM and LPT) in Device Manager, I ALWAYS get: This device cannot start. (Code 10)
WHAT is going on!! I've wasted so much time with this problem.
johnnysnavely said:
PLEASE! I need to load a new ROM into my MT6575 phone using Smart Phone Flash tool.
I've installed the Mediatek drivers on 4 different computers in my house (Vista, Window 7, Windows 7 64bit, Windows 8) and I cant get ANY of them to work!!
When I look under Ports (COM and LPT) in Device Manager, I ALWAYS get: This device cannot start. (Code 10)
WHAT is going on!! I've wasted so much time with this problem.
Click to expand...
Click to collapse
your not the only one with this problem i have it too with same mt6575 someone help please
Need to uninstall device and reinstall drivers
If you google, "Code 10", you will find that on a Windows system it is an error code generated by the Device Manager "because it can not start a device". In a nut shell, the most likely cause for this is because the device was not properly installed with the right drivers.
If you are running Windows, you can try to use the attached file called USBReview to see what device that is as you know it is your phone. Basically, with this program you can remove all the old drivers and start all the driver installation again.
Try to find your phone either here on xda, on the web or contact your phone's manufacturer - you need drivers!!!
Good luck, Mr. Phelps.
johnnysnavely said:
PLEASE! I need to load a new ROM into my MT6575 phone using Smart Phone Flash tool.
I've installed the Mediatek drivers on 4 different computers in my house (Vista, Window 7, Windows 7 64bit, Windows 8) and I cant get ANY of them to work!!
When I look under Ports (COM and LPT) in Device Manager, I ALWAYS get: This device cannot start. (Code 10)
WHAT is going on!! I've wasted so much time with this problem.
Click to expand...
Click to collapse
ronbo76 said:
If you google, "Code 10", you will find that on a Windows system it is an error code generated by the Device Manager "because it can not start a device". In a nut shell, the most likely cause for this is because the device was not properly installed with the right drivers.
If you are running Windows, you can try to use the attached file called USBReview to see what device that is as you know it is your phone. Basically, with this program you can remove all the old drivers and start all the driver installation again.
Try to find your phone either here on xda, on the web or contact your phone's manufacturer - you need drivers!!!
Good luck, Mr. Phelps.
Click to expand...
Click to collapse
Your USB program does give a lot of information I have never seen before, but I still haven't been able to figure out how to get the driver to load.
thanks, John
I'm having the same problem installing the MT6575 USB VCOM drivers. Is there a workaround to get this installed? I"m using WIN 6 64bit
johnnysnavely said:
PLEASE! I need to load a new ROM into my MT6575 phone using Smart Phone Flash tool.
I've installed the Mediatek drivers on 4 different computers in my house (Vista, Window 7, Windows 7 64bit, Windows 8) and I cant get ANY of them to work!!
When I look under Ports (COM and LPT) in Device Manager, I ALWAYS get: This device cannot start. (Code 10)
WHAT is going on!! I've wasted so much time with this problem.
Click to expand...
Click to collapse
This is what worked for me after lot of experimenting and searching:
- get MTK6575 drivers (for instance from Bruno Martins where he writes about flashing mtk6575 - google: MT6575 flashing tutorial bruno
- Start c/windows/system32/hdwwiz.exe (as admin)
- Click next
- Manually select hardware
- List all devices
- Select the driver (for example usb2ser_Win764.inf)
- from the List select "MediaTek Preloader USB VCOM Port"
(or you can install other drivers from the list if Preloader is not enough..)
On another computer I solved it by installing whole Android SDK, checked my android system and installed updated for SDK (approx. 2 GB) and it installed correct drivers automatically.
Also you can experiment with using another usb port..
Please write here if it helped.
ivy13 said:
This is what worked for me after lot of experimenting and searching:
- get MTK6575 drivers (for instance from Bruno Martins where he writes about flashing mtk6575 - google: MT6575 flashing tutorial bruno
- Start c/windows/system32/hdwwiz.exe (as admin)
- Click next
- Manually select hardware
- List all devices
- Select the driver (for example usb2ser_Win764.inf)
- from the List select "MediaTek Preloader USB VCOM Port"
(or you can install other drivers from the list if Preloader is not enough..)
On another computer I solved it by installing whole Android SDK, checked my android system and installed updated for SDK (approx. 2 GB) and it installed correct drivers automatically.
Also you can experiment with using another usb port..
Please write here if it helped.
Click to expand...
Click to collapse
Tried your first method but still get Code 10 error. Could not understand your second method. Please help. Me device is Qmobile Noir A2
hye.. any progress? am having the same issue.. just for MTK6575 com port driver
Just made my Amoi N820 work
So happy
You get Code 10 becouse your windows couldn't recognize the driver but that's irrelevant becouse flashing will work
No solution?
Any solution on this problem?
I've this china mt6575 galaxy s3 clone and got rooted using CF Root.Got ADB composite driver successfully installed in my pc (using win7 32-bit).When I install preloader usb vcom driver, i'm also facing this 'code 10' issue.Until now I can't install CWM in my phone.(the Flash Tool cannot detect my device).i try to install/push CWM using Terminal Emulator but nothing seems to change .when reboot into recovery mode the same stock recovery appear.Any help please?
orion~X said:
Any solution on this problem?
I've this china mt6575 galaxy s3 clone and got rooted using CF Root.Got ADB composite driver successfully installed in my pc (using win7 32-bit).When I install preloader usb vcom driver, i'm also facing this 'code 10' issue.Until now I can't install CWM in my phone.(the Flash Tool cannot detect my device).i try to install/push CWM using Terminal Emulator but nothing seems to change .when reboot into recovery mode the same stock recovery appear.Any help please?
Click to expand...
Click to collapse
i have thet problem to.
is ther solution?
I HAVE SOLUTION FOR THIS PROBLEM!!
Just ignore the error Code 10! Start the SPFlashtool and load the scatterfile, click on download and connect your switch off Phone with the computer. It will work fine.
Having the Same Problem
I understand I can ignore it and it works on that part, however I'm trying to root my phone now and it's not recognising that I have attached a device to the computer. Please need help to solve the problem. Have the drivers but can't get it without code 10
Hi.
me test for me not work.
iphone 4s.
plz help me.
hihi2u2 said:
I understand I can ignore it and it works on that part, however I'm trying to root my phone now and it's not recognising that I have attached a device to the computer. Please need help to solve the problem. Have the drivers but can't get it without code 10
Click to expand...
Click to collapse
Did you ever get this problem solved as I have the same issue with an MTK 6592 chip based phone?
I have the same problem too.
Installation of Media Tek preloaded drivers gives me Code 10 error.
Has anyone found the solution?
my phone is totally dead without power now after I tried to flash with SP Flash tool using correct ROM. I noticed in device manager that there is a CODE 10 error in mediatek preloader usb driver.. is this the culprit? my phone can no longer be detected now in SPFlash or MTK Droid tools... so hopeless... this is a brandnew phone I bought to be given as gift to my cousin...
I did it! I did it! I did it!
The solution is... we need not MediaTek USB VCOM (Android) (USB\VID_0BB4&PID_0005&MI_02), but PreLoader USB VCOM Port (USB\Vid_0e8d&Pid_2000) !
I have MTK6582 (KingSing S2), the host - WinXPx64.
It looks like my phone (and, maybe, other MTK devices too) have several engineering modes.
I have spent several hours trying to get working VID_0BB4&PID_0005&MI_02, which is exposed, if device is turned on while holding VOL- pressed. In this mode some strange factory mode with nonfunctional menu items is displayed on the screen. But to activate mode with Vid_0e8d&Pid_2000 some trickery is necessary.
Sometimes this USB interface starts repeatedly to appear and disappear every half-second in infinitive loop. I had such situation once, when connected turned off phone to USB cable with battery removed.
I just literally catched MT65xx Preloader by double clicking on it in windows device manager and pressing "install drivers" in it's properties. I have used Driver_Auto_Installer_v1.1236.00\SmartPhoneDriver\x64\Infs\usbvcom.inf from http://spflashtool.com/download/Driver_Auto_Installer_v1.1236.00.zip. DriverVer = 12/24/2011, 2.0000.0.0
After clicking "Read Back" in Flash Tool this insane loop stopped and program started to function as intended.
This interface could also appear once and for very short moment, if turned off phone (with battery inserted) is just connected to host. Also it could be seen again, if power button is pressed. If "Download" or "Read Back" is not pressed in advance in Flash Tool, than boot will continue after smaller than a second pause (if device is functional).
I don't know if running Install.bat (from archive I have given above) is necessary. It didn't installed driver when Vid_0e8d&Pid_2000 wasn't active, but, I guess, running it during short blinks would give the same effect.
Also, I don't know, if advice given in comment#6 in this thread four years ago would work. Maybe, the fault was in older version of driver (DriverVer=05/30/2011,1.1123.0).
Another reason could be that necessary USB interface disappears before windows manages to install driver for it for the first time. Possibly, only if "catched" in device manager, user could manually assign driver to it.
I've been struggling with my UMI Rome for days. It has/had the black screen problem, sometimes won't enter recovery mode, sometimes wouldn't allow charge, sometimes works just fine (yesterday). Last night i mistakenly cut off power during a battery recharge. -- today it has all the above problems (bricked) so I am trying doing a flashing again using the tutorials and tools on the Tehnotone.com site. Sintetix's reply above helps me at least have a better clue on what is going on. Wish me luck! BTW, I am using a Dell Windows 10 pc. (Results to be reported here.)
Sintetix said:
The solution is... we need not MediaTek USB VCOM (Android) (USB\VID_0BB4&PID_0005&MI_02), but PreLoader USB VCOM Port (USB\Vid_0e8d&Pid_2000) !
I have MTK6582 (KingSing S2), the host - WinXPx64.
It looks like my phone (and, maybe, other MTK devices too) have several engineering modes.
I have spent several hours trying to get working VID_0BB4&PID_0005&MI_02, which is exposed, if device is turned on while holding VOL- pressed. In this mode some strange factory mode with nonfunctional menu items is displayed on the screen. But to activate mode with Vid_0e8d&Pid_2000 some trickery is necessary.
Sometimes this USB interface starts repeatedly to appear and disappear every half-second in infinitive loop. I had such situation once, when connected turned off phone to USB cable with battery removed.
I just literally catched MT65xx Preloader by double clicking on it in windows device manager and pressing "install drivers" in it's properties. I have used Driver_Auto_Installer_v1.1236.00\SmartPhoneDriver\x64\Infs\usbvcom.inf from http://spflashtool.com/download/Driver_Auto_Installer_v1.1236.00.zip. DriverVer = 12/24/2011, 2.0000.0.0
After clicking "Read Back" in Flash Tool this insane loop stopped and program started to function as intended.
This interface could also appear once and for very short moment, if turned off phone (with battery inserted) is just connected to host. Also it could be seen again, if power button is pressed. If "Download" or "Read Back" is not pressed in advance in Flash Tool, than boot will continue after smaller than a second pause (if device is functional).
I don't know if running Install.bat (from archive I have given above) is necessary. It didn't installed driver when Vid_0e8d&Pid_2000 wasn't active, but, I guess, running it during short blinks would give the same effect.
Also, I don't know, if advice given in comment#6 in this thread four years ago would work. Maybe, the fault was in older version of driver (DriverVer=05/30/2011,1.1123.0).
Another reason could be that necessary USB interface disappears before windows manages to install driver for it for the first time. Possibly, only if "catched" in device manager, user could manually assign driver to it.
Click to expand...
Click to collapse
I tried what you said. It wouldn't install properly. It kept saying error (code 10) and showed in device management with a caution sign every time I installed the driver. I disabled the forced driver signature thingamabop but it still does it. I guess I'm screwed. Has anyone else fixed this?
Well as all the other cases i have also in my hands a Dell Streak 5 which got stuck on the logo screen and i have been fighting for weeks to recover it without any success. My father tried to update it to the latest version and he messed up with everything.. Unfortunately, i dont know the exact steps he took as he can not remember.
First of all i will describe my current situation and i will describe all the steps that i have taken until now..
1. Dell recovery can not be accessed by pressing (Volume +,Volume - and On/Off)
2. Dell fastboot can not be accessed by pressing (On/Off Camera button)
3. Dell download mode works fine by pressing (Volume + when connecting device with usb.)
4. The Qualcom drivers are successfully installed.
5. Dell successfully passes streakflash.
6. Dell fails in the end of the QDL tool with error
Wait for ADB device" error [D2]:wait ADB fastboot mode timeout! (black screen on Streak)
Click to expand...
Click to collapse
What i have done so far to resolve my issue.
I have followed this quide and numerous others that are alterations of the below guide.
Firstly after the download, you have to get the drivers (guess the problem is only with Win7 64 bit OS) in place.
The same link above has the links on tutorials to install QDL tool drivers for Qualcomm HS-USB Diagnostics 9002.
After this...
1) Run streakflash version from the streakflash.zip(after extraction though).
2) Boot into diagnostic mode (Vol Up + Power button) and connect the USB cable to the computer. 'Qualcomm HS-USB Diagnostics 9002' will show in the port field in streakflash QDL tool.
3) Hit the run button. The process should stop at success.
4) Disconnect USB cable and close streakflash QDL tool.
5) Now run the QDL tool that came in repairtool.zip (after extraction though).
6) Boot the Streak into diagnostic mode (Vol Up + Power button) and connect the USB cable to the computer. 'Qualcomm HS-USB Diagnostics 9002' will show in the port field in QDL tool.
7) Hit the run button. The process should stop at success. If not, dont forget try again and again. Make sure you change USB ports (to which you are connecting ur streak) on ur system too.
Click to expand...
Click to collapse
I have tried all the fastboot drivers that are provided by Dell from their website and the drivers that come with repair tool and streakflash. My issue here is that although i installed the drivers in the computer i dont have a way to match the drivers with my Dell as long as it is not possible to enter in fastboot mode. The only thing i did is to plug in my HTC Desire and when it asks for the driver i provided the drivers for the Dell in order to be able to find them later. I dont know if this is even possible but i tried it. Another thing i did is to add legacy hardware in the windows devices and i added the Android Adb Interface, Android Bootloadern Android Composite ADB interface but this did not work as well..
Last but not least i tried 2 different ports of my laptop. The first one stucks at Run Hex Success and the second arrives to the point i described previously. The operating system is OSX and i am running Windows 7 32bit in a virtual host and i tried the same in a normal Windows 7 installation. Both give the same results.
Finally i tried 2 different internal sd cards, the 1st one is the one coming from dell(2GB) and the second one is a 4GB that it was being used as external. Both gave me the same errors.
I have search in all the XDA forum, modaco, pocketables but i did not encounter a similar situation.
Please, if anyone has any clue what could be wrong and i can not overcome the above error please share with me.
Best Regards
Same problem
I have the same problem. The phone just won`t go in fastboot mode after streakflash, it`s just the same. I try to find another version of streakflash qdl but i can`t find it.
QDL won`t work because the phone won`t go in fastboot (wait for adb- error), so i think the problem is streakflash.
Maybe someone can help us:crying:
kotsos.marga said:
Well as all the other cases i have also in my hands a Dell Streak 5 which got stuck on the logo screen and i have been fighting for weeks to recover it without any success. My father tried to update it to the latest version and he messed up with everything.. Unfortunately, i dont know the exact steps he took as he can not remember.
First of all i will describe my current situation and i will describe all the steps that i have taken until now..
1. Dell recovery can not be accessed by pressing (Volume +,Volume - and On/Off)
2. Dell fastboot can not be accessed by pressing (On/Off Camera button)
3. Dell download mode works fine by pressing (Volume + when connecting device with usb.)
4. The Qualcom drivers are successfully installed.
5. Dell successfully passes streakflash.
6. Dell fails in the end of the QDL tool with error
What i have done so far to resolve my issue.
I have followed this quide and numerous others that are alterations of the below guide.
I have tried all the fastboot drivers that are provided by Dell from their website and the drivers that come with repair tool and streakflash. My issue here is that although i installed the drivers in the computer i dont have a way to match the drivers with my Dell as long as it is not possible to enter in fastboot mode. The only thing i did is to plug in my HTC Desire and when it asks for the driver i provided the drivers for the Dell in order to be able to find them later. I dont know if this is even possible but i tried it. Another thing i did is to add legacy hardware in the windows devices and i added the Android Adb Interface, Android Bootloadern Android Composite ADB interface but this did not work as well..
Last but not least i tried 2 different ports of my laptop. The first one stucks at Run Hex Success and the second arrives to the point i described previously. The operating system is OSX and i am running Windows 7 32bit in a virtual host and i tried the same in a normal Windows 7 installation. Both give the same results.
Finally i tried 2 different internal sd cards, the 1st one is the one coming from dell(2GB) and the second one is a 4GB that it was being used as external. Both gave me the same errors.
I have search in all the XDA forum, modaco, pocketables but i did not encounter a similar situation.
Please, if anyone has any clue what could be wrong and i can not overcome the above error please share with me.
Best Regards
Click to expand...
Click to collapse
http://srinicame.blogspot.in/2012/09/unbricking-dell-streak-5.html
some sparks flew with this
im not sure whether it works or not but it is definetly worth a try
RE
I try that too, the streakdroid page is offlline. i still think that the problem is streakflash 2.7.4.5 , because it run perfectly, but nothing changes, i cannot run into fastboot.
emyl_is said:
I try that too, the streakdroid page is offlline. i still think that the problem is streakflash 2.7.4.5 , because it run perfectly, but nothing changes, i cannot run into fastboot.
Click to expand...
Click to collapse
Same issue since months. No fastboot on my streak. Tried QDL, nothing. anyone has the QDL repair tool?
---------- Post added at 10:38 AM ---------- Previous post was at 10:01 AM ----------
I have finally found a working QDl repair tool.
This should help most of us
http://forum.xda-developers.com/showthread.php?t=2343463
Good luck
I'm amazed how many people still try to root the Streak using one-click root tools. They're not recommended, mainly because of the results shown in this thread. They're also unnecessary, as the Streak is arguably the easiest device to root so long as you immediately boot into the recovery after installing it.
repairtool.zip - 185.25 MB
This may be what you're looking for.
My lenovo S580 got hard bricked while I tried to install my own custom ROM it is having a Qualcomm snapdragon 200 is there a way to revive my lenovo S580 from its sleep.Please help.
Anyone please help
I'm waiting please anyone know how to unbrick a hard bricked Qualcomm device please help.
Adrenoaak322 said:
I'm waiting please anyone know how to unbrick a hard bricked Qualcomm device please help.
Click to expand...
Click to collapse
Hello!
You can try the following:
1. search and download sp flashtool. Actually you can get this from official SP Flashtool official site.
Assuming you are running Windows, also download MediaTek USB VCOM drivers and Driver Auto Installer v1.1236.00 from the same site.
2. have an S580 rom ready.
The Process:
1. Install the windows drivers you downloaded
2. Open the folder you extracted SP Flashtool and run it as administrator.
3. Inside the folder of your unzipped rom file, look for a file similar to XXXXXXXXXX_scatter_file.txt
4. Load this in the SP Flashtool (click downlad tab, then scatter loading, load this file in there. It should load your rom you will see some colours, etc...
The tricky part:
Assuming you have correctly installed the drivers:
1. turn off the device (well if bricked it is turned off all ready) just make sure, and if possible remove the battery.
2. Click the green download button on SP Flashtool.
3. Hold down the Vol down key on your s580 and connect it to a usb port.
4. If you see a red line and continue to yellow, all is probably good! Don't let go of the vol - button until yellow line reaches 100%
If it fails, try again by removing the mediatek drivers, and by installing the latest lenovo USB drivers you can find.
My phone has a Qualcomm Snapdragon will mediatek drivers work on Snapdragon chipset
r&xp said:
Hello!
You can try the following:
1. search and download sp flashtool. Actually you can get this from official SP Flashtool official site.
Assuming you are running Windows, also download MediaTek USB VCOM drivers and Driver Auto Installer v1.1236.00 from the same site.
2. have an S580 rom ready.
The Process:
1. Install the windows drivers you downloaded
2. Open the folder you extracted SP Flashtool and run it as administrator.
3. Inside the folder of your unzipped rom file, look for a file similar to XXXXXXXXXX_scatter_file.txt
4. Load this in the SP Flashtool (click downlad tab, then scatter loading, load this file in there. It should load your rom you will see some colours, etc...
The tricky part:
Assuming you have correctly installed the drivers:
1. turn off the device (well if bricked it is turned off all ready) just make sure, and if possible remove the battery.
2. Click the green download button on SP Flashtool.
3. Hold down the Vol down key on your s580 and connect it to a usb port.
4. If you see a red line and continue to yellow, all is probably good! Don't let go of the vol - button until yellow line reaches 100%
If it fails, try again by removing the mediatek drivers, and by installing the latest lenovo USB drivers you can find.
Click to expand...
Click to collapse
My phone has Qualcomm Snapdragon chipset will mediatek drivers work on Snapdragon chipset.
Adrenoaak322 said:
My phone has Qualcomm Snapdragon chipset will mediatek drivers work on Snapdragon chipset.
Click to expand...
Click to collapse
You have nothing to lose by trying! I cannot think of any further damage you can do to the device. If you want to be cautious, trying installing only the lenovo drivers and following the steps.
If your phone is not recognized and the process does not either not complete or initiate at all, then also install the mediatek drivers. The mediatek drivers are to facilitate communication between device and computer, they are not going into your device. What your device will get is whatever is in the scatter file in the rom you should have downloaded.
Googling about your problem, turned up using SP Flash anyway, you can google it too.
Hope I am helping, let me know how it goes! I recently revived my Lenovo Tab 3 8 Wifi following the steps I described!
qualcomm specific info
Hello Adrenoaak322.
You never posted back whether you were successful or not in reviving the phone. Anyway, I found some qualcomm specific information. I will pm you the links, if you want to take a look. Hope it helps.
Hey can QFIL work
Adrenoaak322 said:
Hey can QFIL work
Click to expand...
Click to collapse
Definitely worth trying. Perhaps even better from SP Flashtool, since QFIL is qualcomm specific.
You will need to do a little research on how it works, if it needs some kind of file similar to scatter file for SP, etc, etc. I sent some links to your PM that maybe useful in the process.
Maybe other users, around here, with more experience can help out?!? Anyone???
boot to "recovery mode" by pressing the volume up and power button after the lenovo and android logo appears release both buttons and immediately touch the Home button. Do clear wipe data after that select reboot now. in which case it will take a while but do not worry just wait until your lenovo returns to normal.
I'm trying to install stock rom in my OPPO A57 as it went dead and doesnt turn on. While going through the process i had to install Qualcomm USB drivers . After installing the drivers, there was no connection as it didnt showed up in my device manager. Went through several fix videos on youtube. Many of those tutorial videos showed to update the QHSUSB_bulk (found in device manager) with the qualcomm drivers. Unfortunate thing is there is no QHSUSB_bulk in device manager. How do i install the drivers? why QHSUSB-bulk is not showing in device manager? Help please asap.
toposexxum said:
I'm trying to install stock rom in my OPPO A57 as it went dead and doesnt turn on. While going through the process i had to install Qualcomm USB drivers . After installing the drivers, there was no connection as it didnt showed up in my device manager. Went through several fix videos on youtube. Many of those tutorial videos showed to update the QHSUSB_bulk (found in device manager) with the qualcomm drivers. Unfortunate thing is there is no QHSUSB_bulk in device manager. How do i install the drivers? why QHSUSB-bulk is not showing in device manager? Help please asap.
Click to expand...
Click to collapse
By any chance do you have another computer, if you do, try on that one. If not tho, try replacing the USB cable or check if the micro USB port to see if it is damaged somehow, it is always important to check those things first.
I personally own the device and have never faced a issue and even went ahead and installed CM 13.0 on it.
Pleaaaaas
Help me for root my device
S7
I'm going to give u info that you rarely find about this issue.
many users didn't realize that that port will only be active for a very short time. Pressing Power+vol up+vol down at the same time SHOULD ONLY BE DONE AFTER you have load all necessary files into QFIL or DownloadTool, it should the last thing u do.
It is ok to let the device connected to your pc while setting up qfil etc, but your phone must be in shutdown mode.
now open device manager, then press all three buttons at the same time, release aftee you see device manager is showing sign of detection of the qualcomm port, do not wait more than 4 seconds to press DOWNLOAD. And click DOWNLOAD on the QFIL app. I suggest using QFIL v1.0.0.2
after that your phone will reboot normally. QFIL will look like it's still not finish, but it actually had finished flashing so you can close it.