i'm about to go to a theme park but I can't leave my phone anywhere..i will be going on fast rides taking me into the air and stuff..will this damage my phone in anyway...i know older phones screen gets fuzzy and blurry...
Sent from my GT-I9100 using XDA App
I doubt anything will happend unless its hit by something.
Also, worst title ever.
J.2K4V said:
i'm about to go to a theme park but I can't leave my phone anywhere..i will be going on fast rides taking me into the air and stuff..will this damage my phone in anyway...i know older phones screen gets fuzzy and blurry...
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
LOL.
Provided it is in a zipped pocket to prevent it from accelerating at 9.81 m/s^2 towards concrete, then you should be fine.
you might damage it on the water rides depending how wet you get.
I suggest you place it firmly in your arm pit.
luckingfast said:
you might damage it on the water rides depending how wet you get.
I suggest you place it firmly in your arm pit.
Click to expand...
Click to collapse
But what happens if hes sweaty? Then the phone drowns anyway
Sent from my GT-P1000 using XDA Premium App
Also for future references it helps to name the topic in a more helpful way then Hellllppppppppp...
But yes you will be fine. Just take care of it.
Sent from my GT-I9100 using XDA Premium App
wrap it in a plastic bag, I find Morrisons shopping bags the best.
You could go for the megga safe method and wrap loads of duct tape around it also (sellotape works as a good cheap alternative). make sure you get about 5 layers on.
Oh I forgot to say, keep your arms close to your sides.
Make sure you keep your arms and legs inside the vehicle at all times.
i think you should be more worried about people trying to pinch it from your pocket than the g force damaging your phone.
and ,yeah... dont title like that again dude
J.2K4V said:
i'm about to go to a theme park but I can't leave my phone anywhere..i will be going on fast rides taking me into the air and stuff..will this damage my phone in anyway...i know older phones screen gets fuzzy and blurry...
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
this guy is really asking for it...
you've got to be kidding me
Related
Gentleman,
Removing the battery door the first time was a little tricky. I felt as though it would be easy to damage the door/door tabs. Is there a trick to it that I'm missing?
Thanks,
Sent from my GT-I9100 using XDA Premium App
I've found that using the corner of a credit card (or similar plastic card) is quite convenient. Just gently push it in the slot where you are supposed to use your fingernail.
Cheers
I spent an hour try to prise the back of the phone as per SGS 1 before spotting it had a different back .
jje
I think it's a lot tougher than first impressions suggest. I've just been prising it off. To put it back on, just insert the bottom tabs first and work your way around the cover, clipping it into place.
It just feels like every time I remove it im wearing down the tsbs on the door or the device tab catchers.
Thanks for the info
Sent from my GT-I9100 using XDA Premium App
Just stick the top of your thumbnail in that little notch on the top right side of the cover, and pull. It'll pop off like butter.
Well, no not like butter, but it's not hard. Don't worry the back cover can take a lot of abuse, lol
Pinkthesink said:
Gentleman,
Removing the battery door the first time was a little tricky. I felt as though it would be easy to damage the door/door tabs. Is there a trick to it that I'm missing?
Thanks,
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
There is no trick, I had the same reaction as you on my first time trying to put the battery in, I thought I was going to rip it back to bits. You'll just have to get used to it..
FYI, I use a knife (ones you eat with) to open it, it's much better than trying to use my fingernails
I found that using my fingernail to get it started while slowly pulling back and wiggling it left to right, released it much easier.
Sent from my GT-I9100 using XDA Premium App
Pinkthesink said:
It just feels like every time I remove it im wearing down the tsbs on the door or the device tab catchers.
Thanks for the info
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
It's like the Evo in that sense then... I was always afraid of trashing the plastic clips over the past year, but they are remarkably wear resistant. Just don't rip the cover off and you should be fine.
So I was in an important phone call outside, when it was 107, and it seems the sweat got into the lcd. now I see some smudges on the screen.
Is there anyway to get it out? or will warranty cover it? does anyone think the rice trick will work?
Place it on top of your cable box while on. Just needs some dry heat for a night or two.
Sent from my Incredible 2 using XDA Premium App
I'll give that a shot.
In the meantime, I guess I'll have to leave the PC on and have the calls forwarded through GVoice.
ddgarcia05 said:
Place it on top of your cable box while on. Just needs some dry heat for a night or two.
Sent from my Incredible 2 using XDA Premium App
Click to expand...
Click to collapse
It seems that trick might have made it worse. Gonna do the rice trick now.
phone wasn't submerged, but enough water got to it to cause the water seal to turn pink. I blew dried it and dumped it in rice and what not.
I attempted to start it up the screen had no discolorations and it booted riight up but everything was force closing while trying to enter the phone from the lock screen.
so I rebooted and the phone stays at the galaxy s2 screen.
i attempted a nandroid (I already have a saved nandroid) but wanted to backup this one since i'm not sure it syncd some of the contacts.
when attempting the nandroid i got an error during the backup portion of the data.
Does that mean i should just recover from my original backup or is thier anything i should be doing?
thanks
Um i think you might have to get a replacement phone..
When i had a iPhone i dropped it in my pool so i let it dray out for 2 years and now it works.
Though i have a Galaxy S II cause i love android and the thing doesn't break plus i spilled water on it and it works fine with no effects.
Get some 90% alcohol. Remove covers, battery, Sim cards, etc.. submerge the phone in it for 3-5 minutes to displace any moisture still trapped inside. Take it out, let sit and evaporate for 10-15 minutes. Place inside your oven at 125° for 4-6 hrs. Replace battery and fire it up. If it still won't boot then return for warranty as your humi-dots will now be white
Sent from my SAMSUNG-SGH-I777 using xda premium
Stevenrogers_420 said:
Get some 90% alcohol. Remove covers, battery, Sim cards, etc.. submerge the phone in it for 3-5 minutes to displace any moisture still trapped inside. Take it out, let sit and evaporate for 10-15 minutes. Place inside your oven at 125° for 4-6 hrs. Replace battery and fire it up. If it still won't boot then return for warranty as your humi-dots will now be white
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
No way.
If you're going to try this at least wait an hour before the oven. And be sure to preheat it.
I have baked Nokias back to life.
Sent from my SGH-I777 running MIUI with Siyah
I rework/repair circuit card assemblies for the largest defense contractor in world....
I use this process daily on boards worth more than your house....
Sent from my SAMSUNG-SGH-I777 using xda premium
What's the water seal?
Sent from my SAMSUNG-SGH-I777 using XDA App
Edgarhighman said:
What's the water seal?
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
He means the humi-dots. Little white stickers that turn pink/red when a certain humidity level is reached..
Sent from my SAMSUNG-SGH-I777 using xda premium
Stevenrogers_420 said:
I rework/repair circuit card assemblies for the largest defense contractor in world....
I use this process daily on boards worth more than your house....
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I do too......well not really but I did stay at a holiday inn express last night.
Haha, I couldn't resist.....
do you work in Huntsville ala by any chance.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Grand Prairie Texas.
Lockheed Martin Missles and Fire Control..
Sent from my SAMSUNG-SGH-I777 using xda premium
Stevenrogers_420 said:
Grand Prairie Texas.
Lockheed Martin Missles and Fire Control..
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Cool. I work for kratos out of Huntsville
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Nice.. That looks like fun. ;-)
Sent from my SAMSUNG-SGH-I777 using xda premium
Stevenrogers_420 said:
I rework/repair circuit card assemblies for the largest defense contractor in world....
I use this process daily on boards worth more than your house....
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Okay. Still at least preheat the oven so there isn't direct heat on the device which is much greater than 125.
And do the boards have a screen? Is that an issue?
Curious
Derrrrrr
Sent from my SGH-I777 running MIUI with Siyah
ok everything seems to have worked. looks like my data was corrupted and restoreing worked...my only issue is with my volume down button, I have to apply either a lot of pressure or tapp hard repeatedly to get the volume to go down. Also my humi stuff is still pink. as i didn't want to take the phone apart.
any suggestions for the volume button and the humi?
I will thank everyone for responding to this thread
thanks again
Any residual moisture still trapped inside the board layers will slowly develop copper dendrites and kill your phone. The only way to stop the process is to bake it out. This will also dry out your humi-dots and turn them white again. It may work for now but in a couple months the problems will get worse.
Just my $.02
Edit: Check out metallic electromigration phenomena. Exactly the reason for humi-dots and not honoring warranties on phones exposed to excessive moisture..
Sent from my SAMSUNG-SGH-I777 using xda premium
Stevenrogers_420 said:
Any residual moisture still trapped inside the board layers will slowly develop copper dendrites and kill your phone. The only way to stop the process is to bake it out. This will also dry out your humi-dots and turn them white again. It may work for now but in a couple months the problems will get worse.
Just my $.02
Edit: Check out metallic electromigration phenomena. Exactly the reason for humi-dots and not honoring warranties on phones exposed to excessive moisture..
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
i have to take the phone apart to bake it at 125? to make sure that is.
No , Remove your battery, Sim cards, sdcards and bake it without the back cover....
Sent from my SAMSUNG-SGH-I777 using xda premium
Stevenrogers_420 said:
No , Remove your battery, Sim cards, sdcards and bake it without the back cover....
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
thx i will do that right now. and for aprox how long?
2-4 hrs should do it.
Sent from my SAMSUNG-SGH-I777 using xda premium
curious how this worked out. My wife dropped hers in the toilet like...a week ago. we've been doing the rice thing....
if we did this, how do you put the phone in the oven? won't it melt? scren up or down? on a cookie sheet? pizza stone? suggestions?
It's booting up now, but it gets REALLY hot on the back of the phone, (volme rocker) side, toward the bottom if you pop the back off the phone and look there, it's just below the circle that's molded into the plastic. it'll booth and run for a minute tops and then just turn off. this alcohol idea is intriguing to me.
allroy1975 said:
curious how this worked out. My wife dropped hers in the toilet like...a week ago. we've been doing the rice thing....
if we did this, how do you put the phone in the oven? won't it melt? scren up or down? on a cookie sheet? pizza stone? suggestions?
It's booting up now, but it gets REALLY hot on the back of the phone, (volme rocker) side, toward the bottom if you pop the back off the phone and look there, it's just below the circle that's molded into the plastic. it'll booth and run for a minute tops and then just turn off. this alcohol idea is intriguing to me.
Click to expand...
Click to collapse
I'm going on a limb here and say they were joking about the oven
Sent from my SGH-I777
Hello guys.
Got mine SGS3 as a present 2 weeks ago. At first I didn't notice this, but now it makes me wonder... Btw this is mine first touch screen and Android phone.
1. Friction between finger and screen oscilates. In one moment, it is super smooth, but in other there is some additional friction with different intensity. The screen is still usable, of course, but this issue is quite irritating. What is even worse, I just can't see any pattern in these screen changes. Even when I clean the screen with microfiber, wash and dry my hands, problem is still present sometimes.
2. Back cover. I noticed on 2 spots that plastics clicks everytime I touch it. Everything seems perfectly fit, except on those 2 tiny spots, although it is not noticable when you just look at it, just when you press it - it clicks. One spot is right besides camera flash and other above USB/charge cable slot. It doesn't bother me that much, I'm more interested if there are other people with similar issue.
I don't have receipt and the phone is bought in another country. Therefore, it is quite a problem for me to return it and ask for replacement. On the other hand, since it is quite expensive toy, it would be ridicilous not to claim it, unless this is "normal" (?!). I want to hear what you think and about your experience, just in case I'm doing something wrong and/or missing something obvious.
Thank you.
Sent from my GT-I9300 using xda app-developers app
Bump.
1. It seems that I'm an idiot and those increased friction between my fingers and screen is caused by my sweaty hands/fingers. It is pretty humid and hot these days, so it's understandable. How can I solve this? What do you think - can screen protector help in my case?
2. Remains. Does your sgs3 plastics clicks time from time or it is perfectly fitted?
Thank you.
Sent from my GT-I9300 using xda app-developers app
1) Put anti-fingerprint screen protector. You will have a bit blurry screen but should solved your issue.
2) Put a case on it and you are good to go
Else, get an exchange....
Enjoy
Sent from my GT-I9300 using xda app-developers app
Thank you very much, Arsaw!
Do you or other sgs3 users have some recommendations for screen protector and case? Some specific model?
Sent from my GT-I9300 using xda app-developers app
tgv87 said:
Thank you very much, Arsaw!
Do you or other sgs3 users have some recommendations for screen protector and case? Some specific model?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Loads reviewed in Applications .
jje
Yeah, I missed that. Thank you.
Sent from my GT-I9300 using xda app-developers app
Hello!,
I'm not sure if I'm posting in the right section but you guys can correct me if I'm wrong and I'll move it to another post.
So here is the case for my Sony Xperia Sola. It fell in water and when I picked it up and turned it on it turned on (bad mistake I know! but that was the first time I ever dropped my phone in water and didn't know what to do in that situation.) it seemed fine but I was still worry. I took out my Sim and SD card and let it dry for an hour. After an hour I turned it on again and it seemed fine so I just left it alone. I never turned off the phone though just for clarification, which I should have after many research but it was too late. Next day I tried turning it on again and it won't power on just a black screen. Then I put the charger on it and the red L.E.D. came on. So I thought the battery was just low tried again to power on but still a black screen. Am I at a total loss here? Can anything be done to save my phone I love this phone and I just had it for 2 months. Maybe a fried battery by chance?
The first thing you should do when a electronic device falls in water is to put it in a jar filled with rice, the rice will absorb water but I guess it's too late to tell you that. If you have still locked bootloader and warranty you could try going to assistance. Hope you solve the problem
Sent from my MT27i using xda premium
I heard this from a friend who has tried this with success, immediately put the device in a container filled with alcohol. It repels the water and does not harm electronics. Remove the battery of course.... Let dry... Should work fine.
Sent from my LG-P925g using xda premium
chrism.brunner said:
I heard this from a friend who has tried this with success, immediately put the device in a container filled with alcohol. It repels the water and does not harm electronics. Remove the battery of course.... Let dry... Should work fine.
Sent from my LG-P925g using xda premium
Click to expand...
Click to collapse
You can't remove battery on Xperia sola, it's built-in.
Sent from my MT27i using xda premium
chrism.brunner said:
I heard this from a friend who has tried this with success, immediately put the device in a container filled with alcohol. It repels the water and does not harm electronics. Remove the battery of course.... Let dry... Should work fine.
Sent from my LG-P925g using xda premium
Click to expand...
Click to collapse
I think it's a little late to soak my Sola in alcohol. It's been 4 days already since the incident.
KarterPatryk said:
You can't remove battery on Xperia sola, it's built-in.
Sent from my MT27i using xda premium
Click to expand...
Click to collapse
Yeah, That's what I thought too. Heard that you can't remove the battery, but is it possible to take it apart to find the battery inside? Not a good idea but why not right, phone isn't turning on so minus well. Do you think it could be a fried battery? My front l.e.d. light comes on so any possibility there?
If led turns on I don't think it's battery problem, maybe screen doesn't work cuz water did something there.
You actually can take out battery some how but then it loses warranty
Sent from my MT27i using xda premium
My brother just had this happen. A repair technician told him to take the phone apart and clean the corrosion off of the contacts throughout the phone. You can see it. He did, and the phone is fine now....
Sent from my LG-P925g using xda premium
chrism.brunner said:
I heard this from a friend who has tried this with success, immediately put the device in a container filled with alcohol. It repels the water and does not harm electronics. Remove the battery of course.... Let dry... Should work fine.
Sent from my LG-P925g using xda premium
Click to expand...
Click to collapse
Camera and Screen need removing first of they'll get full of liquid and damaged.
theronkinator said:
Camera and Screen need removing first of they'll get full of liquid and damaged.
Click to expand...
Click to collapse
My brother didn't remove either. I think because alcohol evaporates very quick. He put his whole phone in the container. Later, after it dried, the phone worked. Maybe it was a fluke......
Sent from my LG-P925g using xda premium
KarterPatryk said:
If led turns on I don't think it's battery problem, maybe screen doesn't work cuz water did something there.
You actually can take out battery some how but then it loses warranty
Sent from my MT27i using xda premium
Click to expand...
Click to collapse
It's okay I didn't even buy warranty for the phone. So I'm at a dead end here only option left is to take it apart and see if I can do anything to it.
chrism.brunner said:
My brother just had this happen. A repair technician told him to take the phone apart and clean the corrosion off of the contacts throughout the phone. You can see it. He did, and the phone is fine now....
Sent from my LG-P925g using xda premium
Click to expand...
Click to collapse
Yeah I'm getting the proper tools to take the phone apart first. Then see if I can see any corrosion. How did your brother clean the corrosion?
I'll ask him and let you know.....
Sent from my LG-P925g using xda premium
Hey, my brother used rubbing alcohol and a tooth brush. Not complicated. He dipped the tooth brush in a cup of rubbing alcohol and scrubbed all contacts and solder points he could see...
Sent from my LG-P925g using xda premium
Finally took it apart and this is what I found. I think I'm at a total loss here. :crying:
anything I can do?
Alt+Ctrl+Del said:
anything I can do?
Click to expand...
Click to collapse
Probably not but I can tell you an amusing drying your phone out technique but its just a joke if it'll cheer you up?
Sent from my Xperia S using Tapatalk 2
Sorry for your phone :/
If u planning to buy a new one I recommend you the Google edition Xperia z, will be the perfect phone I think haha, Sony+Google mmmm
Ben36 said:
Probably not but I can tell you an amusing drying your phone out technique but its just a joke if it'll cheer you up?
Sent from my Xperia S using Tapatalk 2
Click to expand...
Click to collapse
I want to hear the joke haha
Sent from my Xperia Sola using xda premium
Ben36 said:
Probably not but I can tell you an amusing drying your phone out technique but its just a joke if it'll cheer you up?
Sent from my Xperia S using Tapatalk 2
Click to expand...
Click to collapse
Hahaha Let's hear it.